Company Code wise message processing in Service Desk Solman 4.0

Hi Guru's,
We are implementing Solution Manager 4.0 service desk with SP 15.We have got a scenario like our branches are in dubai , USA and Nepal. All these locations have multiple company codes. So our company requirement is to handle the message company code wise.
For example if the message creator is from company code 1000 then the message should go to support team belonging to same company code 1000. Is it possible to create a rule in PFAC with container company code to achievthis or is there any other method ? If creation of container is possible with company code how does the system get the company code details from Business Partner?
Please give light into this issue.
Best Regards,
Sanju

Mohammed,
Could you please help me as to how did u go about it.
I am having the same issue right now.
Deepak

Similar Messages

F.01 Balance Sheet-Report to see in company code wise

Hi Experts
Goodevening
We are recently upgraded to ECC.6 version of SAP.
The issue is, when we use Tcode F.01 relating to Balance Sheet Report it is giving the result in Business Area Wise of all the assets and liabilities.
Is there any possiblility to see the report in company code wise and not the business area wise. since the same asset is displayed in different business area wise.
eg.,
21100/1011004 Gross Block - Intangible assets 647,080.00
21100/1011004 Gross Block - Intangible assets    22,048.00
21100/1011004 Gross Block - Intangible assets 2,847,283.25
21100/1011004 Gross Block - Intangible assets 92,040.00 21100/1011005 Gross Block - Plant And Machin75,258,226.67 21100/1011005 Gross Block - Plant And Machin   216,968.87
          the problem is like above
now we want to see the report in lumsum, without business area wise.
pls suggest me how to get the report
thanks in advance
warm regards
kishore

Dear Kishore,
While executing in F.01 give all parameters without Business Area and Execute
Apart from that if you need to additional thing go through dynamic selection in F.01.
Assign point.........thanks in Advance.
Rgds
Madhuri

Vendor list by company code wise with Acoount group..?

Dear all
Can anybody expalin me how to get a report on vendors list by company codes wise with account group...
1.List of vendors company codes wise
2.List of vendors company codes wise with account group wise.
Thanks
sap-mm

1.List of vendors company codes wise
SAP Easy accessSAP Menu-accounting-financial accounting-vendors-information system-reports for account payable accounting-master data-S_ALR_87012086-VENDOR LIST
2.List of vendors company codes wise with account group wise
MKVZ
Regards,
Indranil

To view the company code wise cost and profit centers

hi all,
how to know the company code wise cost centers and profit centers? and what is the transactin codes for this?
Regards,
Soma

Hi Soma,
Could you try Table-->CSKS. I believe it will give you the complete list of Cost Centers and the default Profit Centers along with Company Code info.
Regards
Srinivas

Company code wise material with quantity table

Hi
I need Table for company code wise material with quantity to check 2009 stock which is issued.
thanks
Edited by: pandu123 on Aug 17, 2011 1:21 AM

Hi,
There is no table which shows direct relation between company code and plant, you will have to arrive at the assignment of the plants to the company code.
But you can either write a query/ report to show this relation and a report with this relation and quanity will have performance issues if you are checking for huge data.
You can refer to the query and check the quantity in the standard reports.

GR Company code wise Number Range

Dear All,
I want to know is it possible to maintain material and accounting document different number range Company Code wise?
If it is so, then explain.
Suppose Company Code 1000 -
No range 5000000000
& Company Code 2000---- No range 6000000000
Thanks \
Akshay

Hi,
upto my knowledge number ranges are independent of company codes. even though if you have created new document types and assigned to transaction codes these tcodes will worl independent of company code . so its not possible to have material documents on company code wise (Material document number ranges will be on client level)
regards
suleman

Maintain company code wise Exchange rate in SAP

Dear SAP Experts,
Is there any additional configuration to maintain company code wise Exchange rates in SAP?
Awaiting for your valuable inputs......
Thanks
Madhusudhan.B

Hi,
Exchange rate table is not company code dependent. You can maintain, though, different exchange rate types.
Regards,
Eli

Total records in IT0000 company code wise - SE16N

Hello All,
I need to check the total number of records in IT0000 for employees belonging to a particular company codes or personnel area. But there shouldn't be any duplicate entry for a personnel number in the total records.
In SE16N I am able to get an entire list but not company code wise. Is there any way I can generate the total no records in each infotype, on the basis of company code or personnel areas?
Regards,
Ally

1 - If you have activated Complementary Measures, you should look at table PA0302 instead of table PA0000.
2 - As mentioned by Pedro, se16n will not allow you to get what you require in a single step. An Ad Hoc Query could probably allow you to create the report you want.
3 - Should you be able to get lists of employee numbers "on the basis of company code or personnel areas" (possibly using se16n to look at table PA0001), then you could use those lists to explore the different infotypes (tables PA0000, PA0002, PA0006, etc...) using se16n, but unless you restrict the output to the records with End Date = 31.12.9999 , you will end up with many records for each employee.

GR Number range company code wise

Hi,
Can we do the enhancement/ user Exit / Badi for yearly GR Number range with repect to company code wise ?
If yes then please provide the details how we can move further.
Regards
Rahul

Hello,
Company code specific number range for Material documents not possible because, The number assignment for material documents and physical inventory documents depends on the transaction/event type which is also allocated to each transaction in Inventory Management. The transaction/event types are divided into groups of number ranges. A number range interval has to be defined for each group.
You cannot change the transaction/event types. However, you can change
the number range intervals or you can allocate transaction/event types to
new groups.
Inshort, All company code will be using the same transaction event key so it will not be possible to have different number range for material docuement based on company code.
Regards
Mahesh Naik
Edit by: Mahesh Naik 19.01.2011 2.08PM

Default document type for F-28 per company code wise.

Hi SAP Experts
My client wants to default document types per company code wise for F-28.
As per my knowledge in OBU1 is cross client and OBZO is accepting only customer invoice and credit memo but not customer payment.
Please help with possible ideas to solve this issue, including any idea relates to substitution also. Your help is appreciated.
Thanks in advance
Prathima

Hi Prathima,
As mouri said it can be done only by Substitutions
Since OBZO is only for enjoy transactions
I have verified the notes aslo but there is no possibility for F-28 by company codes
Better you can use
Prerequisite
SYST-TCODE = F-28
Substitution
use Exit
Inside exit you need fetch the document type as per the companycode
to achieve this you need define one ztable with company code and document type columns
Thanks
Vishnu

Data will be load to data target by company code wise .

Hi,
I have a requirement,"The data will be load to data target(Info Cube)by company code wise .
so any one can provide me the ABAP code.
Regards,
Venkata Sharma.

Hi Sharma,
There is no problem you can do it in R/3 and also in Transfer rules.
Hope this helps
Assign points if useful
Regards,
venkat

Need to move data only by company code wise to another client

Hi All,
I need to move data from DEV client to one of PRD clients.
There are two scenarios:
1. The scenario is we have 3 company codes in DEV but need to move data of only 1 company code (that too customizing data).
2. We want to move data, date wise also (i mean from 1 JAN to till date).
Is there any possibility in SAP to do this?
Thanks
Disha

"As I said above, production system should not be build from quality/development system in any way either by client copy or ALE or any other means."
@Sunny
Not necessarilly correct in all cases. Purely depends on what data is being discussed here. ALso depends on how Business processes have been defined. In lot of projects master data like GL Accounts,Cost Centers,Profit Centers etc is created in Development and ALE'D to production. You can also move a lot of data via transports (cutomizing). Depends on what data is being discussed. Transaction data ..yes you would never do that . But customzing and master data you can; provided you have fool proof processes in place and have a good understanding of how ALE works for the concerned data !
Coming back to the question :
Yes you can do it. Never do it for transactional data. A lot of garbage might have been created. Master data if you are really happy with the quality do it via ALE (but do it first on a test box) . Make sure however that all the relevant customzing is in place. Sequence is import. What got created in DEV first must go to prod first or else you would have errors which of course can be solved but then why take the pain. Involve your FI-CO guys and Business process owners before you do it. Be a bit careful with chart of accounts !
As I said try it on a test environment first..
And why are people suggesting to use TDMS when it was mentioned that only customzing data is involved! Why did SAP create CTS then if customzing has to be moved via TDMS !! Or is the old point frenzy back again !
Regards.
Ruchit Khushu

Delegation of BP/Message processor for service desk message?

Dear All,
How do you i perform the delegation of service desk messages in solution manager ?
Message processor will assign the messages to some other person before he/she goes on leave but what will happen to the newly assigned messages? (Processor is auto determined)
Is there any process thorough which message processor will assign substiute for a particular period ?
(like we normally do in R3 for processing workitems)
I tried to search the forum with the substitute or delegation word but was unable find the relevant thread. So posting a new thread.
Best regards,
Vinod.

Hi digesh,
Service desk and incident management are the same
Yes it is an old functionality and even was working earlier than workcenter
if ur workcenter is not workign no issues just goto BP for the person and then click tab relationships
now choose is replaced by and then bp for the new person who is replacing.
and similarly check or maintain REPLACES old person BP in the relationship tab of bp of the new person.
This is the idea and crux of ur solution which uses BP Relationship functionality
Hope ur prb is solved completely now
Regards
Prakhar

Message not displying in Service Desk ( solman as satellite System)

Hi all,
We have implemented Solution 4.0 with service desk configured and working fine from my development system.
i.e if i raise a message from development i am able to see in CRM_DNO_MONITOR
But i have one more requirement in which my Solution manager System Client 100 will act as Service desk system and from same system and same client if i raise a message i will not be able to See the message in CRM_DNO_MONITOR.
I have maintained following settings in solution manger
Application: OSS_MSG
Type : W
RFC: NONE
CUST640 and 1.0
Thanks & Regards,
Balaji.S

Hi All,
Issue got resovled.
Ref : note no 722459.
It was wrong format of logical system for client.
Thanks & Regards,
Balaji.S

Cash Inflows and Outflows- company code wise, project wise etc.

Hi Gurus,
Client's requirement says they need cash inflows and cash outflows related to a company code, project wise etc. for a specified period.
What needs to be done for this requirement? Do we have to implement Cash Management and liquidity forecasting module to fulfill this requirement???
Please revert asap.
Thank You

Hi
You need to setup the cash journal configuration where cash inflows and outflows will be recorded.
The path is as follows:
SPRO>Financial Accounting>Bank Accounting>Business Transactions>Cash Journal
Hope it will solve your problem.
Regards
Tapan

Company Code wise message processing in Service Desk Solman 4.0

Similar Messages

Maybe you are looking for