Company code ZG01 is not assigned to a fiELD status variant

HI,
I have created company called 'zg01'.
when i try to create a GL ACCOUNT FOR this company using (FS00) i am getting the following error.
Company code ZG01 is not assigned to a fiELD status variant.
FOR YOUR INFORMATION I HAVE CREATED COA and assign the same to the company ZG01.
Please suggest....
also suggest how to i transport GL Accounts used by other companys of my system to my newly created company code : zg01.
so that i can save creation of GL ACCOUNT.

You have to maintain field status variant and assign it to your company code. This is required for GL master data.
1. Define Field status variant in SPRO>Financial Acctg>Financial Acctg Global Settings>Document>Line Item>Controls>Define Field status variant. You create the field status variant and the field status group.
2. Assign the Field Status group to your company code SPRO>Financial Acctg>Financial Acctg Global Settings>Document>Line Item>Controls>Assign Company Code to Field Status Variants
Once you have defined this you will be able to assign field status group to your GL master data.
The use of Field Status Group is to determine the required/displayed/optional fields during posting transactions.

Similar Messages

Profit center dummy and company code XX01 are not consistent

Hi Gurus ,
can you please tell what i should do when the system gives the message that Profit center dummy and company code XX01 are not consistent . this is happening when i post document in FB50.

Owing to program or transport errors, the company code assignment of profit centers may not be stored correctly.
This inconsistent data then causes program terminations or short dumps in further processing.
This note contains the report ZPCA40B_CHECK_CEPC_BUKRS, which checks the consistency of the company code assignment and corrects possible errors.
REfer to OSS <a href="https://websmp207.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=388178&_NLANG=E">388178</a>

The company code TEST does not exist or has not been fully maintained

Dear Experts,
I received the following message when I tried to create a material master from Plant Maintenance module (select view based on general plant data / storage 1).
"The company code TEST does not exist or has not been fully maintained
Message no. M3150
Diagnosis
You have entered either the company code TEST or a plant assigned to this company code. However, the company code either does not exist or has not yet been configured for materials management.
Procedure
Ask your system administrator to configure the company code.
Procedure for System Administration
Carry out the following activities as required:
Create the company code if it does not already exist.
You do this in Customizing for Enterprise Structure in the activity Define, copy, delete, check company code.
Make sure that a fiscal year variant is assigned to the company code.
You do this in Customizing for Financial Accounting (Global Settings) in the activity Enter global parameters.
Configure the company code for materials management.
You do this in Customizing for the Material Master in the activity Maintain company codes for materials management.
However, I've done all the above instructions, yet the message still appear. what else should I check?
regards,
Abraham

Hi,
I've done that earlier..
However, I've chosen the default plant 0001 instead of my own created plant, it works. Then I tried to do it again, with my own plant, it works also..
Anyway, thanks a lot.
regards,
Abraham

The company code OMPL does not exist or has not been fully maintained

hi friends i did in obyc setting also fi posting are happens but the think is mm posting are not happen and not able work on transation code-mmo1i seen transation code:omsy but company code is not mantain properly this is happen in mm module please give hints where to customization please help friends i am on client please
ok
The company code OMPL does not exist or has not been fully maintained
Message no. M3150
Diagnosis
You have entered either the company code OMPL or a plant assigned to this company code. However, the company code either does not exist or has not yet been configured for materials management.
Procedure
Ask your system administrator to configure the company code.
Procedure for System Administration
Carry out the following activities as required:
u2022     Create the company code if it does not already exist.
You do this in Customizing for Enterprise Structure in the activity Define, copy, delete, check company code.
u2022     Make sure that a fiscal year variant is assigned to the company code.
You do this in Customizing for Financial Accounting (Global Settings) in the activity Enter global parameters.
u2022     Configure the company code for materials management.
You do this in Customizing for the Material Master in the activity Maintain company codes for materials management.

hi
Try to maintain the settings in OMSY
and check the posting periods for your company
regards

Alt. local curr. from company code AUTR is not maintained for prog RFUMSV20

Hi,
When running report S_ALR_87012377 getting error Alternative. Local currency from company code AUTR is not maintained for program RFUMSV20. We maintained all required settings.
Can you please help me it is urgent.
Thanks,
Sridhar Reddy.G

Is there an assignment for program RFUMSV00 and RFUMSV20 in the "Specify Alternative Local Currency for Sales/Purchase Tax Return" screen?
Cheers.

The company code 123 does not exist or has not been fully maintained

hi...
frnds..
Error: The company code 123 does not exist or has not been fully maintained..
While creating material master, am getting this error... how to resolve this...
Thanks in advance...
Raghav.KH

Hi,
Check in OX02 whether the city, country, currency and language are maintained and in OX16 it is assigned to company.
If your company code does not exist create new entries by giving an ID and description and fill the above particulars and
assign to the company.
Regards,
Sadashivan

Account 14470000 in company code 2100 is not a reconciliation account

Dear all
Account 14470000 in company code 2100 is not a reconciliation account
Message no. F5355
Diagnosis
G/L account 14470000 in company code 2100 which is to be updated when posting to the customer or vendor is not defined as a reconciliation account.
Procedure
Depending on the cause of the error you can
change the master record of the above-mentioned account and mark it as a reconciliation account
change the customer or vendor master record and enter a different reconciliation account there
for special G/L transactions, change the allocation of reconciliation accounts when configuring special G/L transactions.
14470000=this G/L account is a service tax account
am checked in customer master :there reconciliation account maintained properly
in FS00 every think maintained properly
Thankx in advance
Ajeesh.s

HI,
What kind of transaction you are doing.
Since it is asking to maintain reconciliation account for Service tax account then no point of making any settings in OBXR.
Please check if there is any Substitution you have maintained.
If you are doing Billing then Recon account is automatically pulled from the Customer master which should be maintained as Recon account.
Also check the account determination in the Billing.
Edited by: lolu jo on Sep 10, 2011 3:37 PM

Split Amount, Account 552970 in company code 7175 is not a one-time account

Dear Experts,
Extremely urgent. I'm working on the 4.6c release. I've activated the split amount in the MIRO transaction, but I'm getting the following error: "Account xxxxxx in company code xxxx is not a one-time account".
It's a normal vendor not a one time account.
Could someone help me in that stuff?
Thanks in advance for your help.
Regards
M.

HI,
What kind of transaction you are doing.
Since it is asking to maintain reconciliation account for Service tax account then no point of making any settings in OBXR.
Please check if there is any Substitution you have maintained.
If you are doing Billing then Recon account is automatically pulled from the Customer master which should be maintained as Recon account.
Also check the account determination in the Billing.
Edited by: lolu jo on Sep 10, 2011 3:37 PM

A Unique company code is has not been assigned to company number

Dear Friends,
My Client is having two company codes, 2000 and 3000. Document splitting is active for both the company codes. I just posting the vendor payment through FBCJ-- Cash journal. Earlier i got the same error while posting customer receipt through FBCJ.
I have made changes in the Classify FI document type for document splitting-- Customer payment for DZ as Unspecified. Then it was working fine for me for customer. Now the same error iam getting for vendor payment. I doubt whether what i did earlier to change to Unspecified it corret or is it due to any other setting. We are using Different company numbers for each company code i.e 1 to 1 relationship.
Kindly let me know what i need to change.
Thanks
shankar

Hi Joshi,
That was the change i have made for customer receipts and it is working fine. I will do the same thing for vendors also, But worried whther it effects any where else . Will this error be there for only for Vendor and customer paymnets OR can we expect some other errors like this for other transactions.
Kindly let me know
shankar

Company code name is not getting displayed properly in SRM portal

Hi Experts,
I have an strange issue. In the ECC (Backend) system, my company code name is getting displayed correctly. But in the SRM portal, it is showing the old name.
I have tried to run the report BBP_ATTR_TEXT_REFRESH. But the BUK attribute is not coming in the F4 help. I am using SRM 5.0
Please suggest me any other way where i can refresh the company code name.

Hello,
Kindly refer to the SAP Note 1156021 to resolve your issue here.
Best Regards,
Rahul

How to create a new company code and how to assign it to billing units?

i am working on roll out project.....please help me in creating a new company code....

Hi,
You have raised this query in wrong Forum. Please raise ur query in the relevant forum.
rgrds,
Randhir Soni

Company code currency balance not equal Group currency balance

Dear experts,
Some of our account balances are inconsistent bewteen the company code and the group amount. This company has the same currency in both the company code and group currrencies which are USD. The exchange quotation is also setup in OB08 with 1 in both dir / indir quote. Below is an example for a HKD expenses with a HKD AP account.
GL accounts setup with same currency as company code / group currency.
Exchange quotation setup in OB08 for HKD to USD is dir.qut. 7.8 and indir.quot 7.8.
After translation, the result supposed to be,
In Document currency, Dr expenses HKD780, Cr AP HKD780
In Local currency (company code currency), Dr expenses USD100, Cr AP USD100
In Group currency, Dr exepnses USD100, Cr AP USD100
However, the current result is,
In Document currency, Dr expenses HKD780, Cr AP HKD780
In Local currency (company code currency), Dr expenses USD100, Cr AP USD100
In Group currency, Dr exepnses USD110, Cr AP USD110
The amount in local and group currency should be the same supposedly as they are in the same currency.
Have anyone ever experienced the same situation?

Thanks all,
I have checked that both 1st local currency (company code currency) and 2nd local currency (group currency) are USD.
Our user also didn't change the group currency amount during data entry as there seems no way to alter the amount as it is greyed out.
Is there any other configuration or system flow that may be configured to post these 2 currency amount in a different way of translation?

How to determine which company code a customer is assigned

hi
anybody knows how a customer is connected to a company code
i know its connected to several company codes but i want to know the original company code

Hi
Anjali's question sounds valid. As per my understanding we cannot Create a customer many times. The customer will be created only once (say Customer 1000) and the same existing customer will be extended to other company codes and for other sales areas based on the requirement. The company code and the sales area details in which the customer was initially created should be traceable.
But I donot understand the reason for looking for these details.It will give more clarity on the requirement if the reason behind this requirement is also posted by Anjali.
Thanks,
Ravi

Set tax departure country as company code country and not plants country

set tax departure country as company code country instead of plants country, where do we configure this, plz let me know

Hi,
Check if yours C-Codes in F110 are in same Country.
Go to SPRO:
Enterrprise structure - Definition - Financial Accounting - Edit, Copy, Delete, Check Company Code - Edit Company Code Data.
Regards

Client level , company code level , chart of account level

Hi experts
Pls expline me which are we define under client level , company code level and COA level
like :
1) field status variant:
2) Dunning procedure:
3) document types:
4) doc.number range:
4) posting periods variant
5) controlling area
6) account groups
7) vendor/cust master data
8) dep key
9) chart of dep area
10) like...............................
get points
Geeta

hi geeta,
ClientA Client is the highest unit within an SAP system and contains Master records and Tables. Data entered at this level are valid for all company code data and organizational structures allowing for data consistency. User access and authorizations are assigned to each client created. Users must specify which client they are working in at the point of logon to the SAP system.
A CompanyA Company is the unit to which your financial statements are created and can have one to many company codes assigned to it. A company is equivalent to your legal business organization. Consolidated financial statements are based on the companyu2019s financial statements. Companies are defined in configuration and assigned to company codes. Each company code must use the same COA( Chart of Accounts) and Fiscal Year. Also note that local currency for the company can be different.
Company CodesCompany Codes are the smallest unit within your organizational structure and is used for internal and external reporting purposes. Company Codes are not optional within SAP and are required to be defined. Financial transactions are viewed at the company code level. Company Codes can be created for any business organization whether national or international. It is recommended that once a Company Code has been defined in Configuration with all the required settings then other company codes later created should be copied from the existing company code. You can then make changes as needed. This reduces repetitive input of information that does not change from company code to company code as well as eliminate the possibility of missed data input.
Business Area Business Area is optional and is equivalent to a specific area of responsibility within your company or business segment. BA (Business Area) also allows for internal and external reporting.
Another configuration requirement for set-up in SAP are the Basic settings consisting of the following:
Chart of Accounts(COA)
Fiscal Year Variants.
Currencies
The COA(Chart of Accounts)
The COA(Chart of Accounts) lists all General Ledger accounts that are used by the organization. It is assigned in configuration to each company code and allows for daily General Ledger postings.
Fiscal Year configuration
Fiscal Year configuration is a must and can be defined to meet your companyu2019s reporting periods whether Fiscal (any period combination that is not calendar) or Calendar( Jan-Dec).
Posting Periods are defined and assigned to the Fiscal Year.
Within the periods you specify start dates and finished dates.
SAP allows for 12 posting periods along with specially defined periods that can be used for year-end financial closing.
Rohit Agrawal

Company code ZG01 is not assigned to a fiELD status variant

Similar Messages

Maybe you are looking for