Company Codes list not seen in the user's shop screen

Hi Gurus,
I am working on SRM5.0 server with backend as R/3 4.7C.
My problem is that I have configured the relevant organization settings for the user with the relevant attribute for company code. But, the system doesnot show me the company code in the dropdown list when I shop.
Also, the location is defined in the extended attributes for the user. I can see the location with the attached company code when I search for values for the location field. But, when I select the location from the search result, no value is seen on getting back to the main shop screen.
Can anyone tell me what is the reason for this issue?
Points will be awarded for sure.
Thanks n Regards,
Ancy

Hi Ricardo,
Thanks for the reply.
But, the settings are already done for this config node. Since we have two backend systems with same product category ids, the node reads like this:
Prod Category       Source Sys       Target Sys
                            Backend1          Backend1
                            Backend2          Backend2
Is this the cause of the problem?
Regards,
Ancy

Similar Messages

  • "Company code  is not permitted as the paying company code while FRFT

    Hi Experts,
    I am trying to post cross company fund transfers via FRFT -> F111. In my scenario, CC1 is sending amount to CC2 via a virtual payment method. I have done basic company code set up and also customizations in FBZP for payment method and F8BJ/F8BF for incoming/outgoing transactions. I have also done OBYA setting for cross company clearing account
    During FRFT payment request i get this error: "Company code CC1 is not permitted as the paying company code".
    Did you ever experience this? If so, how can i fix this?
    Thanks in advance.

    Dear subumax
    1.Please check once again in both company codes for FBZP. were you maintained in All Company codes in FBZP - Select your company code and check- were you maintained Paying company code.
    2.Pleasecheck in under Paying Company codes - were you maintained the paying company code CC1 or not
    3Please check in under Payment methods in comapny code were you maintained your paying company code code CC1 details or not 
    Regards
    Shankar

  • Assigned t-code are not reflecting to the user

    Hi,
    I have created a parent role and two derived role from parent.I have assigned these two derived role to the user.These role contains many t-codes.But when i login with the user id one t-code is not executing.Its giving an error that you are not authorized to use this t-code.I tried to add SU 53 to find the cause unfortunately its also giving the same error.I have deleted and addedd,did text comparision from CUA client,used PFUD and SCUL also,still the problem persist.
    Please help to overcome the issue.
    Thanks in advance.
    Regards,
    Ratan.

    Thanks its working now.
    Regards,
    Ratan.

  • Msg K1100 'The CO account assignment object belongs to company code X,not Y

    Hi,
    Unable to create an accounting document for a Return order.
    Message K1100 - Error:The CO account assignment object belongs to company code X,not Y
    Company Code : X
    Sales Org: X
    Plant: P
    Billing Date : IG ( Internal Credit Memo)
    The above details are from the item level- Account Assignment tab-Profitabliity Segment.
    Pl. let us know from which table these fields are picked.
    Regards
    Biju
    Edited by: Biju Mercy on Jan 7, 2010 12:58 PM

    I believe the error message number is ki100 and not  k1100  as indicated by you in which case, refer any of the following notes:-
    a)  140503
    b)  643700
    c)  420778
    d)  352261
    e)  141224
    thanks
    G. Lakshmipathi

  • The CO account assignment object belongs to company code 2100, not 1100

    Hi All,
    My system has all different company codes assigned to one cotrolling area as a result one can change org unit and position cost center from one company code to another.
    I recently changed same position's cost center from co code 2000 to cost center in new  co code 1100 and created new personnel area to be linked to new Co code 1100. OM module doesn't moan however when I try and capture org-reassignment action to default same employee postion with new related cost center from new company code 1100 get the follwing error.
    'The CO account assignment object belongs to company code 2100, not 1100'.
    I see in IT0001 system defaults new personnel area linked to Co code 1100 however it still defaults old cost center linked to Co code 2000 instead of new cost center linked to Co code1100. How can I make the system default  new cost center?
    NB relationship for new cost center  from Co code 1100 to postion has been changed effective 01.04.2012 . The same date is used for or-reassignment action.

    Hi I had same problem can you explain me little bit more that how you will resolve this

  • The CO account assignment object belongs to company code PN10, not BN10

    Hi All, Iu2019m getting the error u201CThe CO account assignment object belongs to company code PN10, not BN10" when trying to make a payment on an invoice that was created in company code BN10.
    The error came about because, there was an exchange rate difference between the invoice value and the corresponding payment value (document currency is USD and the transaction I'm using to make payment is F-58).
    Therefore when i try to make the payment, the SAP system detects the exchange rate difference and attempts to post it to the exchange rate difference account (421020050). In OKB9, the default cost center specified for G/L account (421020050) in BN10 is (B999010). Therefore when the payment is been done, the system posts the exchange rate difference to G/L account (421020050) and assigns the cost center (B999010).
    However, upon trying to save the document, the system shows the message "Correct the marked line items" (the marked line item here is the exchange rate line item). Therefore, I double click the line item to drill down on it and see that everything seems fine. I then click the save button, on clicking it, the system shows the error "The CO account assignment object belongs to company code PN10, not BN10u201D.
    When i double click the error to read a more comprehensive explanation of the error, its content are as displayed below:
    The CO account assignment object belongs to company code PN10, not BN10
    Message no. KI100
    Diagnosis
    You want to make a posting in company code BN10.
    At the same time, a CO account assignment object was specified that is assigned to company code PN10.
    This is account assignment object with object type CTR, and object key NIG1/A999010.
    System Response
    Company code validation is active for company code BN10:
    All account assignment objects in one posting row must be assigned to the same company code.
    Procedure
    You can
    u2022     Make an assignment to company code PN10.
    u2022     Enter an account assignment object assigned to company code BN10.
    u2022     Change the assignment of object NIG1/A999010 to company code PN10. In this case, you should note the document and edit it further after changing the assignment.
    If the posting is to a balance sheet account (category 90), you may also decide whether to allow CO account assignment objects from other company codes. If this is the case, deactivate the error message with the IMG step Change message control (message ID "KI", message number 100).
    You can set the following message types:
    "-"   Message is not sent
    "W"   Message is sent as a warning message
    "E"   Message is sent as an error message
    Posting to cost elements of another category always results in the message appearing as an error message, whether it has been deactivated or not.
    Execute "Change message control"
    (NOTE: All cost centers that starts with u201CAu201D belong to company code PN10 and those that starts with u201CBu201D belong to company code BN10)
    Kindly help with the resolution of this issue. Any resolution ideas would be greatly appreciated.
    Moderator: Please, search SDN

    Check the following OSS notes
    1)  Note 141224 - Error message KI100 for cross company
    2)  Note 202765 - KI100 during release of intercompany billing
    thanks
    G. Lakshmipathi

  • The CO account assignment object belongs to company code 4007, not 4440

    Hi,
    I am Loading Employee data (PA0001) and getting the following error.
    The CO account assignment object belongs to company code 4007, not 4440
    Can anybody clarify me.
    Thanks,
    Aparna

    Hi Aparna,
    Default Cost Assignments arent properly configured. Check TCODE OKB9 and get the assignments rectified with the help of FI Consultant.
    For more understanding, follow the link
    [Error in PA 40  The CO account assignment object belongs to company code XX]
    Hope this helps !!!!
    Kumarpal Jain.

  • The unique company code has not been assigned to company number

    Hi,
    When i am posting invoice (MIRO) the following error is coming "The unique company code has not been assigned to company number" message number GLT0001, (origin - Post). We have only one company code and i have given six digit unique number also and assigned it to the company, still i am unable to post invoice.
    Awaiting valuable suggestions
    Sudheer

    Hi,
    Please check in Company Code's Global parameter whether company has been entered in Accounting Organisation section.
    Award points, if found helpful.
    Regards,
    Harish

  • The Company Codes do not match with cost/profit center.

    We are using custom designed ZIBIZA_DOC_POST  transaction code for uploading text files to company code 0303
    I am getting the following error.
    The Company Codes do not match with cost/profit center.
    what configuration do i need to do to resolve the following issue.
    Any help will be appreciated
    waiting for your reply.
    Regards
    Lakshman

    I have checked in ks13 and se 16 everthing is fine still iam facing the same problem.
    i am explaning the question in more detailed manner
    Hi
    We are using custom designed ZIBIZA_DOC_POST transaction code for uploading text files to company code 0303. We are able to upload the data using the above transaction code for the G/L account 24221030 (Non-Guaranteed Accommodation Balance sheet account) profit centre FXXX.
    Where as for G/l account 41141010 (Handling cost a/c profit and loss account) profit center FXXX, I am unable to upload the same data, it shows the following error.
    The Company Codes do not match with cost/profit center.
    Where as for the same G/l accounts in company code 0311 it is getting uploaded correctly for the above two accounts i.e.
    24221030 (Non-Guaranteed Accommodation Balance sheet account) with different profit center G730
    41141010 (Handling cost a/c profit and loss account) with different profit center G730
    We are not getting the above error in the company code 0311.
    Any help will be appreciated.
    Thanks & Regards
    Lakshman

  • Control message "Purchase across Company codes is not allowed"

    Hello Gurus
    We are running SRM5.0 ECS using EP. If we attempt to create a SC that falls foul of the above validation, we get a message but only as a warning. Naturally if a warning, users will ignore and continue the purchasing process up to the point that the PO is created. However, when the PO is transferred to the ECC, we get the "Error in Process" status for the same message, but ECC validation routines have this set to an error and not a warning.  Evidently there is a discrepancy with severity between SRM and ECC. We want to ensure that SRM matches up to ECC so it is an error in SRM and not a warning.
    Searching the web, I see that the message id is KI-113. Can't be sure this is correct as the portal we use does not display the msg id. I've checked the message control config in SRM, and see nothing for the message. Further investigation reveals that in order to control messages through the config, you can only maintain those that are listed in BBPV_PDMSG. After searching for id or text, I still cannot see how I can escalate ths message to an error.
    Any ideas?
    Thanks
    Ian

    Hi peggy
    This message comes from your r/3 backend system. go to se91 KI - message no. 113 in sap r/3.
    it is not srm message.
    Error : Purchasing across company codes is not allowed
    BR
    Muthu
    Edited by: Muthuraman Govindasamy on Oct 13, 2008 10:17 AM

  • A unique company code has not been assigned to company number 1000

    Dear Friends,
    When I do Inter-Company Transaction thro Transaction Code FB60 it is giving me Error.
    For Example: if I have 2 Company Codes - 8001 & 8002
    I want to Post One Vendor Invoice
    Ex:
    Vendor - 301 ABC Ltd., 5000 Credit
    400020 - Expenses 2000 Debit - Company Code - NGLC
    (Then Debit Expenses G/L Account 460000 for Company Code NGLC1)
    400020 - Expenses 3000 Debit - Company Code - 1000
    (Then Debit Expenses G/L Account 460100 for Company Code 1000)
    When I am going to POST it is giving me an Error please sees below.
    Error Message
    A unique company code has not been assigned to company number 1000
    Message no. GLT0001
    Diagnosis
    Document breakdown is active in your system. In certain cases, a company code is derived from the company ID number, and this must lead to the assignment of a unique company code.
    A unique company code could not be assigned to company number 1000.
    System Response
    You cannot carry out the required posting.
    Procedure
    Assign one company code to company number 1000.
    Please tell me How to solve this issue.
    Thanks in Advance,
    Ranga

    Hi Ranga
    Can you please check OBY6 settings (Additional details) for the co. codes, as it seems either multiple co. codes have been assinged to company number 1000 or none of the relevant co. codes have been assigned with company ID.
    Regards

  • Error : COmpany code does not exist or has not been fully maintained

    Hi ,
    I tried creating a material with industry sector : mechanical , material type : raw material.
    i selected basic data 1 and 2 view or MRP 1 view for views , i gave plant as SUJA and storage location value S001 ( plant and stor loc i have created in the company code 2001)
    but i get this error COmpany code 2001 does not exist or has not been fully maintained..
    I created COMPANY CODE using SPRO - Entreprise structure --definition -  financial accounting --define , copy , check , delete company code..
    kindly suggest me the solution for this error..

    Hi,
    Your company code not activated for material management. Few pre-requisites to create material and one is to activate company code for material management
    Please activate in T.code: OMSY,
    [For example: For Fiscal year variant K4]
    In OMSY steps, u have to enteru2026u2026u2026..
    Company Code (enter your company code name 2001)u2026u2026u2026u2026u2026.
    Company Name..
    Fiscal Year of Current Period 2009
    Current period (posting period) 03( )
    Fiscal year of previous period 2008( will come automatic)
    Month of previous period 02( will come automatic)
    Fiscal year of last period of previous year 2008
    Last month of previous year 12
    Allow Posting to Previous Period (Back posting)
    Disallow back posting after a change of period
    Now create material with T.code; MM01
    Regards,
    Biju K

  • Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?

    Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?

    List and table controls -> listbox..is that what you are thinking of?
    The listbox presents the user with a list of options, and you can set it to only accept one selection at a time...Adding new data to the list can not be done directly by the user but if you make e.g. a text control and a button you can programatically insert new objects described in the text box when the button is pressed...(see example).
    If you need more than one column you have the multicolumn listbox. If you want the users to write new entries directly yu can use a table and read selected cells using it's selection start property to read what cell has been selected.
    MTO
    Attachments:
    Listbox_example.vi ‏34 KB

  • Company code  is not set up for electronic tax return

    hi dear
                what is the configuration of e-return salea/purchase .
    The system cannot execute the taxes on sales/purchases settlement within electronic communication with authorities.
    when i excute F.12 then message coming  Company code  is not set up for electronic tax return
    please guide me.
    regards
    purushottam
    Regards

    Hi,
    if you start report via SE38. program name RFUMSV00 you can read the program documentation. In here it states what is needed:
    ...In addition, the report provides data for the electronic advance return
    for tax on sales/purchases. The administration report for electronic tax
    returns (FOT_B2A_ADMIN) then directly sends the return to your relevant
    tax authority.
    To use the electronic advance return for tax on sales/purchases, make
    the necessary settings in the screen area Posting Parameters under
    Electronic Advance Tax Return.
    For more information, see the SAP Library under Financials -> Financial
    Accounting (FI) -> Financial Accounting  General Topics -> Taxes
    (FI-AP/AR) -> Taxes on Sales/Purchases, Sales Taxes, and Additional
    Taxes -> Electronic Advance Return for Tax on Sales/Purchases.
    Hope this gives you a beginning.
    Hein

  • BB Passport: After upgrading to 10.3.1, the USB key are not seen by the OS

    Blackberry Passport:
    After upgrading to 10.3.1 Any kind of USB key is not seen by the OS, even after restarting the operating system.
    With original OS 10.3 could connect USB key to transfer my photos with file manager.
    Any suggestions?

    There a lot of issues being discovered by users doing the upgrade OTA or using Link. And they are varied. It's had to say whether your problem another of these issues or something else. Those I trust are recommending a clean OS install using an autoloader as so far there are not the same problems afterward.
    You could try the autoloader route. Do a backup first. After the clean OS install, test before you do a restore and install app. If problem is gone, then you know the clean OS works. The next question will be if the problem returns when you restore or add apps.
    - Ira

Maybe you are looking for