Company factory calendar validity error

While maintaing Delivery schedule , when i entered year 2010. Then got the massege
Delivery date outside period covered by factory calendar .
Error Message no. ME078
How to solve this ?

Hi,
Can u please Check what is the validity Period maintained in factory Calender? and your Inputs in Schedule lines?
SPRO=> SAP Netweaver => General Settings => Maintain Calender....
if its 2010 Please extend it to Max till Date your company purchased the License of SAP.
Regards,
Ninad Kshirsagar

Similar Messages

  • Invalid factory calendar or error in the factory calendar

    When I am trying to post " Goods issue for consumption:" in T.code MB1A getting below error error
    Invalid factory calendar or error in the factory calendar
    I am made chages in OY05 still facing same issue. Please help me out.

    Hi
    The factory calender is not a mandatory field during configuration, but is required for IM postings to occure.
    Check and maintain factory calender:  SPRO\SAP ref IMG\Enterprise structure\Definition\Logistics general\Define, copy, check, delete plant.
    Regards

  • Factory Calendar Validity Date Expires 2010

    Hi All,
    In all standard SAP systems Factory Calendars are delivered with a validity date until 2010 at first installation.
    This could lead to follow-up errors at the turn of the year.To overcome the issue we need to extend the validity date of Factory Calender across all SAP system.
    As per my understanding we can extend the validity of calender manually in OLTP system (i.e. ECC etc) but in BW system we mostly transfer these validity using the "Transfer global settings".
    Is there a way to maintain these validity directly in BW instead of importing it from ECC, and is this recommonded to do it directly in BW?
    If we do it directly in, BW will this impact sync between OLTP and BW system etc?
    Any expert advice is highly appreciated...
    Regards
    Dev

    Yes, the settings can be maintained in BW, in the same IMG position as ECC.
    If you have a single ECC system and BW system, I would always 'Transfer Global Settings' in a daily (or weekly - minimum) process chain to insure consistancy between the systems.
    If my BW consolidated multiple ECC systems, I would maintian the BW system manually
    John Hawk

  • PO Error : Deliv. date outside period covered by factory calendar

    Hi,
    We are encountering an error "Deliv. date outside period covered by factory calendar xx" when creating a PO. I checked the delivery date of the item and it is : 11/30/2009. The Factory calendar valid from/to year is 2005-2013. What may have caused the error to appear ?

    Hi ,
    How can i check  whether the validity period of the factory calendar is within the valididty period of public holiday calendar.
    Regards,
    Vinayak

  • No of days using factory calendar

    Hi Gurus,
    I know effective date(Example 01/01/2007). How to calculate no. of working days for effective date 01/01/2007 using factory calendar.
    Thanks
    Liza

    Hi Liza,
    start date and end dates are needed only if you want to know the number of working days between the two dates. In your case you can get number of working days  between effective date and the begining of factory calendar validity date.
       Check  FM "DATE_CONVERT_TO_FACTORYDATE"  . You have to pass parameters      Date  and  Clendar ID. The output will be number of working days .
    ie  effective date  minus    TFACD-VJAHR
    Table TFACD gives you the calendar ID and the validity dates(  VJAHR and BJAHR)
    Jaya

  • Factory Calendar in BW

    Hi Experts
    I am testing END_TIME_DETERMINE FM.
    What is FACTORY_CALENDAR in that FM,How can i find the list of FACTORY_CALENDAR is BW and they values
    Thanks

    Factory calendar contain company specific dates such as alternate working Saturdays, Plant shutdown etc.
    You can create your company factory calendar via transaction code 'SCAL'.
    An example of a SAP application that uses the factory calendar is the SAP MRP modules.
    Assuming that you have a specified an alternate working Saturday, MRP will postponed the planned orders to the next working day if it happened to falls on a non-working Saturday.
    Regards,
    Mansi

  • Factory Calendar and Work Center

    Dear All
    I am confused between factory calendar and work center working.  Kindly guide me what factory calendar does and what work center does?

    Hello,
    Factory Calander :-- Factory calendar contain company specific dates such as alternate working Saturdays, Plant shutdown etc.
    You can create your company factory calendar via transaction code 'SCAL'.
    Assignment of the factory calendar by plant is done in transaction code 'SM30 - V_T001W'.
    An example of a SAP application that uses the factory calendar is the SAP MRP modules.
    Assuming that you have a specified an alternate working Saturday, MRP will postponed the planned orders to the next working day if it happened to falls on a non-working Saturday.
    Work Center :--
    Operations are carried out at a work center. In the R/3 System work centers are business objects that can represent the following real work centers, for example:
    Machines, machine groups
    Production lines
    Assembly work centers
    Employees, groups of employees
    t-code-- CNR1 - Create
    for more information go to this link
    http://help.sap.com/saphelp_smehp1/helpdata/en/40/8ac473d40943ddb23def12bdb33437/content.htm
    Thanks

  • Factory calendar & week no

    How SAP will decide the week no.
    For example 2009 week no1 will start from dec29-2008 or Jan 4 2009 .
    How to change the settings
    Any input will be highly appreciated
    Thanks

    Hi Jeevan
    You may define your own factory calendar valid from 2009 for a period of max 5 years 2014 and when you are going to activate the working days from monday to friday it will conside the staring work day as monday it falls as 1st week on 1st of Jan
    can you select your predefine factory calendar from 2009 and save it and let me know it is a open config or transportable it totally depends on client configuration settings
    i hope it will give you an overview
    thanks
    shaik

  • 61 062 & date comes after end of valid factory calendar. (Please correct)

    Hi Experts,
    I am Getting the Error in Creating Purchase Order:
    Error Message No. 61 062 & date comes after end of valid factory calendar. (Please correct)
    Please suggest.
    Regards,
    Ashok

    I got a Solution For this. Actually User has Maintained Wrong Planned Delivery time in PIR for the Same it was Behaving like that.
    Thanks

  • Error Msg_ME078 - DELIV. date outside period covered by factory calendar

    Dear experts:
    when i create PO with ME21N,
    if the delivery date is not within the year of 2010,
    there will appear an error msg "ME078 - DELIV. date outside period covered by factory calendar".
    i have checked the factory calendar with SCAL.
    i know how to modify the factory calendar to expand the time period,
    but now i still have a question,
    the system can't change the year period automatically?
    so we have to change the period after we confirm the public holiday calendar?
    thanks ~
    B/Rs
    Jamie

    hello~
    if the system can't update the calendar automatically..
    why the consultant didn't set the valid period to an  exaggeration year at that time?
    did they have any concern?
    thanks a lot~
    B/Rs,
    Jamie

  • Factory calendar error (returncode = 3)

    Hi,
    I am trying to create planning for product group, but getting error Factory calendar error (returncode = 3)
    Message no. MA408
    I have checked the validity for factory calendor but it is found ok with valid upto 2013. and allocation of factory calendor with plant 1000. the same factory calendor with validity is observed.
    Pl help me out of this issue.
    Regards,
    Anil

    Dear,
    Please check  have you maintained different factory calendars in the customizing for SOP (Transaction MC7F for S076) and for the plant OX10.
    Please use same calendar in MC7F. and check again.
    Regards,
    R.Brahmankar

  • Factory calendar error in service order

    Dear Guru's
    could any body help me in solving the below issue.i created the service notification in iw51 after that i clicked the service order tab then system gives the pop up mesage in that i mentioned order type,planning plant,business area,main work center after that i got the below error.
    Date 09.09.2011 is after the valid factory calendar period
    Message no. IW432
    Diagnosis
    You entered a date for which the factory calendar was not maintained in your factory.
    System Response
    Processing will not be continued.
    Procedure
    Enter a valid date.
    If you want to use the date rejected by the system as a valid date, you must maintain the factory calendar in your system with the help of the Customizing function:
    Proceed
    If you are not allowed to perform the function, contact your system administrator.
    from which master data system is picking the Factory calendar.
    how to solve the problem.
    Thank you in advance.
    suribabu.

    Thanks to every body.i solved the problem.

  • Error: Factory Calendar Not In Buffer

    Hi all.
    I am rtrying transaction CO15 to confirm order, but it giving error RU017: Factory calendar not in buffer. Contact system administrator.
    I have checked all assignment, it is correct. factory calendar correctly assigned to plant. Can anyone help me...
    Thanks.

    Hi Puru,
    Check the release date of the production order and the date on which you are trying to confirm, see that there is a valid factory calender available for that day (Plant assignment or the factory calender assigned to the Workcenter of the operation you are trying to confirm)
    Hope this helps...Reward your points if so,
    Regards,
    Prasobh

  • Calendar Component and validation errors

    Hi,
    For the first time I am trying to use the Calendar component to insert a date field in my SQL Server db.
    The problem: I can insert a date column only if its of type java.sql.Timestamp.
    As Timestamp extends the date object..
    I tried to bind the selectedDate field as <Timestamp> Object[refractored in my class file] and when i tried to update by DB it throwing a Validation error.
    If I bind it as a Date Object directly I am getting an EvaluvationException
    as date objects cannot be inserted directly
    Am i missing something here or is there a proper way of implementing it.

    Its a fairly direct question about object conversion problem in creator
    Basically the selectedDate parameter of the JSC Calendar component
    needs to be pointed to a Date Object
    If we need to insert that date information to a SQL Server column the equivalent data type should be java.sql.Timestamp which extends Date.
    So if we point the selectedDate parameter as a Timestamp object the creator throws an illegal argument exception.
    Can some one clarify how to resolve this issue?

  • Error while processing sales order as factory calendar missing.

    "factory calendar missing or error in factory calendar".iam getting this error while processing sales order even though i have assigned it to shipping point and plant and sales org.

    Hi Malik, How are you? I'm sorry to trouble you,
                   Let me introduce, I'm Daniel, and I saw your fantastic asnwer in
    the topic "How to update Factory Calendar in SRM", and might I have the same
    problem. It's with the "factory calendar".
    In transaction va02 when I choose a Delivery Date, and I sent it to process, as
    a result in the "shipping tab" it calculated to the first item one date, and to
    the rest one date different.  I don't know What it happen?
    I debugged the program and I saw that to the first item use to calculate the
    date is the function  'APO_SCHEDULING', and to the rest item use
    'SD_SCHEDULING', and until here I come.
    How can I do to what the dates calculated are the same? or What would be the
    problem?
    I need the dates calculated are equal.
    I looked at it's using two "factory calendar" which are "J4" and "C2". Is this
    correct?
    Thanks In Advance,
    My best regards,

Maybe you are looking for

  • Xslt support

    The FAQ states that XSLT is not implemented in the product, but "it's easy to integrate" with a third party engine. No further mention of XSLT integration is given anywhere in the Oracle literature. I am hoping the integration is easy, but I am still

  • ITunes/iPod displays album tracks out of order

    I have this weird problem where one of my albums has three tracks that display out of order. http://i55.tinypic.com/mtwf0x.png I can't think of anything in the tags that would cause this. They're all identical in terms of album/artist/# of tracks...

  • Getting an error msg while trying to run the java class from CMC

    Hi All, I am getting an error, while trying to run the java .class file, that which is imoported into CMC. Error msg: Exception in thread "main" java.lang.UnsupportedClassVersionError: Bad version number in .class file      at java.lang.ClassLoader.d

  • Fill multiple columns of the report at once ???

    I have been told that when coding a Report, there is some way to fill multiple columns of the report at once. Instead of select field1, field2.... You could do <????> filling field 1 and 2 My source was vague as to what kind of thing it would be that

  • After Effects CC 2014 change color?

    The new interface is based on blue, in some parts. The color changes in some way? I use Windows.