Company Logo Distortion

Why is our company logo distorted and fuzzy when converted from a Microsoft Office Publisher Document to a PDF?  We are using Windows XP and Adobe Acrobat X Pro.  The logo worked fine before we upgraded to the Acrobat X Pro.  Now we can't seem to get it to convert properly anymore.  It doesn't matter how it's converted either.  I've tried 3 or 4 different ways and it always ends up the same.  I've also checked for updates and there are none.  Any ideas as to what the problem could be?

Hi Phillip.  I’ve checked the format used and I tried both jpeg and PNG.  Neither one converts properly.  The jpeg image is 7 KB and the PNG image is 32 KB.  Don’t know if that makes a difference.  Even when I resize the PNG image to small, it’s still not acceptable for our report cover pages.
Thank you for your reply. 
Diane
Diane Forrester, Office Administrator
Calder Engineering Ltd.
12246 Albion Vaughan Road
Kleinburg, ON  L0J 1C0
Tel: (905) 857-7600   Fax: (905) 857-5900
Email:  <mailto:[email protected]> [email protected]
Website:  <http://www.caldereng.com/> www.caldereng.com
Email Disclaimer:  This email communication and any files transmitted with it may contain confidential and/or proprietary information and is provided for the use of the intended recipient only.  Any review, transmission or dissemination of this information by anyone other than the intended recipient is prohibited.  if you receive this email in error, please contact the sender and delete this communication and any copies immediately.  Electronic communication over a public network is not secure and therefore Calder does not accept any legal responsibility for the contents of this message, including any damage caused by any virus transmitted by this email.  Thank you.

Similar Messages

  • How do i add a company logo to my email signature on my mac book pro

    how do i add a company logo to my email signature on my mac book pro

    I would like to know how to do this as well. All I'm able to do is add the link, but not the button. My colleague has done this on his Outlook on his HP. I'm not sure why this is so difficult!

  • Want to change company logo and address.

    Hi all,
    Here i have one Standard print report "SAPF130K" for customer or vendor balance conformation . But when i run this report this time i get logo of company "IDES HOLDING AG" and getting address of this company. but customer number and his address get properly but now i want to get my company logo place of this "ides holding ag" . For this i find many thing in SE71 tcode but i am still not able to change this logo and address so can u please kindly help me out how can i change this both.
    Thanks in Advance.
    Keyur

    @  Anurag_N: This is not ALV, but SAP SCRIPT report.
    Hello,
    This standard report is using form F130_CONFIRM_01 for the printing purpose.
    Please check in this form, how you can handle ur logo.
    R u doing any config for printing this report for the form etc?
    This text is coming from the window ADDRESS and the below inlude:
    INCLUDE &T001G-TXTAB& OBJECT TEXT ID ADRS LANGUAGE &T001-SPRAS&, where &T001G-TXTAB& for me is coming as
    ADRS_SENDER.
    So, just add ur logo in the standard text ADRS_SENDER in SO10, you will c it in the sap script layout.
    But, i am not sure how this variable &T001G-TXTAB&  gets populated and if it will get changed for soem other value.
    Edited by: Kanwardeep Singh Gill on Apr 9, 2010 12:30 PM
    Edited by: Kanwardeep Singh Gill on Apr 9, 2010 12:35 PM

  • How to ... Generate PDF from BexWAD Application with company Logo in header

    Hi all profis,
    I read many theories (on-line help, sdn forum, google) about creating a PDF document with pictures, logos, texts and so on, but in each of them is some "...but, limitations, only if ..."
    The easiest way, I guess is to create a BexWAD Application with item "REPORT" and "ANALYSIS ITEM".
    In REPORT - a crystal report page, is saved company logo with text
    ANALYSIS item includes data
    Via Export (into PDF) those both items has to be exported. The only topic is, how to repeat the report item on each page of a PDF document? There is a possibility to repeat column names, but not a company logos as a header.
    I will ask in general -> Does someone has a solution, how to export data from SAP BI into PDF including  Logo and Text(Company Adress) in header (which will repeat on each page) ??
    Thank you very much for any purposes. As answer I prefer a concrete suggestions, not links to on-line help.
    Have a nice day.
    Standa

    I have another idea to create a PDF file with company logo and hierarchical structure of data.
    Via Report designer, it is not possible to display data in hierarchical structure, but it is possible to add logo (picture) into header.
    Via WADWeb Application designer, it is possible to display data with a hierarchy, but a logo is not shown on each page.
    Via InformationBroadcaster, there is a possibility to add into header a free text. There is an option <PR_ONLINE_LINK> . Can I create another element (new, own one), which will contain a picture? How can I edit this element <PR_ONLINE_LINK> ? Would it be possible to add there a picture?
    Thank you
    Standa

  • HT201320 How can I add a company logo to my email signature on my iPhone 5

    Can someone detail the process to add a company logo to my email signature
    on my iphone. It is for an additional email account thru go daddy, it's not my icloud account.
    I would appreciate the help.
    Thanks.

    My guess is the problem with the square is being caused by incomplete or broken html in the Email Signature.  I think the Signature panel doesn't know how to fix HTML.  But the email app does... so this is why you copy a complete & pre-formatted email message: entirely. 
    I walked through the directions above, exactly, and it works with (in my case) even oversized JPG files in the signature.
    By copy and pasting the whole message body, you'll retain the html formatting &, in my case, the image too.  Running iOS 8.1 & it worked after a few tries. 
    Keep trying combinations... you'll get it.
    -MB

  • How can I add a company logo into my signiture line of my e-mail?

          I have an Ipad 2 that I use for business, I would like to attach a company logo to the signature line to appear on all of my outgoing messages for better identification. How can I do this?

    Check the video to learn how to add an email signature with logo to iPhone email http://www.youtube.com/watch?v=2K7kaHksli8&noredirect=1
    Regards,
    MilesWeb.

  • How do I add a pdf or jpeg of my company logo to my signature on emails?

    How do I add a pdf or jpeg of my company logo to my signature on emails I send from my iPad2?

    Read this.
    http://howto.cnet.com/8301-11310_39-20017611-285/add-a-sexy-html-signature-to-ip hone-e-mails/

  • Company Logo at top of each page in report

    We want to put our company logo on the top of each page in a multi-page printed report (which is already in production and is very complicated).  I don't think you can do this with a standard list abap.  I'm guessing I need to change the abap to a dialogue program and output to a screen?  Can anyone describe the process necessary?  For example will I need to have two containers on the screen, one for the report where I do a leave to list processing, and the other for the logo?  But how would this print - could I do it so the logo appears at the top of each page?
    Certainly SAP provides some (non-alv, non-sapscript) solution to putting a logo at the top of each page?
    Thanks,
    Mike

    Hi,
    I am guessing , that if you are saying non-sapscript, even SMARTFORMS is out of question. Well you don't give many choices, (non-alv, non-sapscript), now do you ?
    As far as I know, I don't think, it is possible to put images using dialog programming or list processing.
    Check out Report Painter if it supports images.
    Regards,
    Subramanian V.

  • Just moved my email from entourage to Mail. Having real problems with getting my signatures to work properly. When adding in a small company logo, windows computers only receive signature as an attachment. Am sending email as Rich Text. Any ideas on a fix

    Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
    When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
    I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.

    Send it as html so the signature is an image source URL

  • Company Logo went off while exporting WebI Report to Excel in BO4.1

    Dear All,
    I am working on BO 4.1.
    When I am trying to export the WebI Report to Excel, I am not able to see Company logo, had this feature been added in BO 4.1 or not yet?
    If available please guide me on how to get this logo in Excel?
    Best Regards,
    Sonal

    Hi Sonal Neema,
    Check the below link this will help you to resolved your issue.
    http://scn.sap.com/thread/3286244
    Regards,
    Anish

  • How to upload the Company logo in the Enterprise Portal

    Hi,
    I want to upload the company logo in the ESS (EP 7.0). Can anybody tell me the procedure for uploading the logo please.
    Thanks & Regards
    Aman

    Hi Chris Solomon ,
    Thanks for your reply,I want company logo on the right hand side of the screen example .
    Working Time
    Record Working Time                                                       logo                                                       
    Release Working Time Data                                            
    Leave Request
    Request leave and other types of absences.                      
    Quota Overview
    Request leave and other types of absences.
    When user click on the Working time tab, Working time page will open and it will show all the links(see above) so I want company logo on the right hand side on the working time page .

  • Node in Form to change IDES Logo to Company Logo in TCode: SFP

    Hi All,
    In TCode: SFP for form PTRV_EXPENSE_FORM  in the "Context" tab  I check the nodes "I_FORM_HEADER_DATA_EMPLPYEE", "I_FORM_HEADER_DATA_EMPLPYER"  and other nodes but they dosent have a subnode to change IDES logo. Unfortunately the "Layout" is not displaying by throwing up an error saying "design tools not present(i.e not installed)"
    I also searched with terms LOGO/Image/Graphics on the form in "Context" tab but nothing showed up in the search
    Could anyone please tell me the subnode where can I upload Company Logo
    Regards,
    Latha

    Hi Waz
    Thanks for your quick reply. I really appreciate your reply
    I dont have authorization to access SO10.
    I checked for INCLUDE ADRS_HEADER OBJECT TEXT ID ADRS in the form but couldnt find it.
    Could you please explain me in detail if possible.
    Regards,
    Latha

  • How to put Company Logo in a SAP R/3 Login Screen

    Hi,
    1)How can we put our own text in the login screen?
    2) how do we put the company logo in the post login R/3 screen?
    Regards,
    Shobhit

    Hi,
    U can insert logo in both the cases.
    Check this
    http://www.sap-img.com/abap/alv-logo.htm
    * Build report title
      PERFORM build_report_title USING gd_report_title gd_logo.
      DATA:  gd_logo             TYPE sdydo_value,
    *&      Form  BUILD_REPORT_TITLE
    *       Build table for ALVtree header
    *  <->  p1        Header details
    *  <->  p2        Logo value
    FORM build_report_title CHANGING
          pt_report_title  TYPE slis_t_listheader
          pa_logo             TYPE sdydo_value.
      DATA: ls_line TYPE slis_listheader,
            ld_date(10) TYPE c.
    * List Heading Line(TYPE H)
      CLEAR ls_line.
      ls_line-typ  = 'H'.
    * ls_line-key     "Not Used For This Type(H)
      ls_line-info = 'User Message Service'.
      APPEND ls_line TO pt_report_title.
    * Users name (Status Line- TYPE S)
      ls_line-typ  = 'S'.
      ls_line-key  = 'Name '.
      ls_line-info = gd_myname.
      APPEND ls_line TO pt_report_title.
    * Status Line(TYPE S)
      ld_date(2) = sy-datum+6(2).
      ld_date+2(1) = '/'.
      ld_date+3(2) = sy-datum+4(2).
      ld_date+5(1) = '/'.
      ld_date+6(4) = sy-datum(4).
      ls_line-typ  = 'S'.
      ls_line-key  = 'Date'.
      ls_line-info = ld_date.
      APPEND ls_line TO pt_report_title.
    ** Action Line(TYPE A)
    *  CLEAR ls_line.
    *  ls_line-typ  = 'A'.
    *  CONCATENATE 'Report: ' sy-repid INTO ls_line-info  SEPARATED BY space
    *  APPEND ls_line TO pt_report_title.
    ENDFORM.                    "build_report_title
      CALL METHOD gd_userlist->set_table_for_first_display
         EXPORTING
                   is_hierarchy_header  = gd_hierarchy_header
                   it_list_commentary   = gd_report_title
    <b>              i_logo               = gd_logo</b>
    *               i_background_id      = 'ALV_BACKGROUND'
                   i_save               = 'A'
                   is_variant            = gd_variant
         CHANGING
                   it_outtab            =  it_emptytab      "Must be empty
                   it_fieldcatalog      =  gd_fieldcat.

  • How to put Company logo in the report?

    Hi,
    How am i going to include the company logo or a image file into my report?
    What is the best tools?
    I have try to use the "Link File" tool and it required me to specify the "Source Filename". So if I put the file path and filename in the "Source Filename", it's hardcoded...
    How to specify the "Source Filename" at run time or any otherway so that it won't hardcoded?
    Regards,
    Cheong

    Note that you can also use the read from file functionality.
    If you have a character based column, then any layout field based on this column will have the Read From File property. If this is set to Yes, then reports will attempt to use the value of the column to read a file from the file system. You can also specify the type of the file (image, text, or even an image URL to read an image from over the web).
    For example, if you have a column in the data model that returns a value ("c:\temp\mypicture.bmp"), and you set the Read From File property to Yes, and the File Format to be Image then at runtime, reports would look for c:\temp\myimage.bmp and return the value. And of course, since you can create a formula column in the data model then you can control the returned value as much as you like.
    Hope this helps,
    Danny

  • Company Logo does not appear in Excel and HTML, but appears in PDF and RTF

    Hi,
    I have a RTF template with my Company Logo Embedded. When I run the report from Standard Request Submission, and I give the output type as Excel or HTML, I dont see the Logo on my report.
    When I give the output type as PDF or RTF, then I see the logo on my report.
    Is there anything special I need to do, to see the Logo in Excel or HTML ? Am i missing anything.
    I am using Oracle BI Publisher Template Builder for Word 10.1.3.2.0
    I would really appreciate if you can pass your feedback.
    Thanks
    Kiran

    Did I post my question in the wrong Forum ?

Maybe you are looking for