Company remote connection doesn't work
Hi all,
I created an application using DI to connect to B1 database (no B1 AddOn, just an external application).
The application works fine on clients inside the customer domain.
But when I try to run it from a pc outside the domain, the Company.Connect() doesn't respond.
Company.GetCompanyList() works fine: I get the list of B1 databases on the SqlServer
but then there's no way to get a response from the Company.Connect()!
Not even an error or an exception! The application simply seems to get stuck.
It seems that the Server Tools / License Manager cannot solve the connection...
Does anybody know what the reason of this problem can be?!?
Are there limits on the connection from outside the domain?!?
Thanks a lot for your help!
regards,
francesca
francesca,
there is no this kind of limitation,
Maybe some firewall ports are not opened...
Tip:
1,
Try connect to the same server with DTW (Data Transfer WorkBench) and try to log on. If DTW is working -> Your addon has a problem.
2.
Check your sql server installation Is the Authentication mode is Mixed or windows?
Regards
J
Similar Messages
-
Wired connection doesn't work if cable is not plugged in at boot time
Hey all,
I started using arch a few days ago and I simply love it, but I have a problem. The wired connection doesn't work if the cable is not plugged in at boot time, or if it was plugged in at boot time, then plugged out and in again. Switching it off and on again via the gui has the same effect. I am using NetworkManager with dhcpcd, NetworkManager is started via systemd, dhcpcd is not, I let NetworkManager do that. When I started investigating this problem there were some remnants of netctl, but now NetworkManager is the only networking-related service started at boot time. When the cable is plugged back in, NM-applet shows that it's connected, and an IP address is assigned, but the connection doesn't work.
Here's some information regarding the system:
It's a lenovo G50-70 laptop, it uses the r8169 driver for ethernet. (I dualboot it with windows 8.1, but arch is default and all this stuff happens also if i only use arch)
The router is a Linksys EA2700/N600
journalctl -u NetworkManager
aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> NetworkManager (version 0.9.10.1) is starting...
aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> Read config: /etc/NetworkManager/NetworkManager.conf
aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> WEXT support is enabled
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> Loaded plugin keyfile: (c) 2007 - 2013 Red Hat, Inc. To report bugs please use the NetworkMan
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/Bokros
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/1. vezetékes kapcsolat
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/UPC1838142
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> monitoring kernel firmware directory '/usr/lib/firmware'.
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.3/0000:02:00.0/iee
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC20
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> WiFi hardware radio set enabled
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> WWAN hardware radio set enabled
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-wifi.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-wwan.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-adsl.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-bluetooth.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WiFi enabled by radio killswitch; enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WWAN enabled by radio killswitch; enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WiMAX enabled by radio killswitch; enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Networking is enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): link connected
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): carrier is ON
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): new Generic device (driver: 'unknown' ifindex: 1)
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): exported as /org/freedesktop/NetworkManager/Devices/0
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): carrier is OFF
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): new Ethernet device (driver: 'r8169' ifindex: 2)
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): exported as /org/freedesktop/NetworkManager/Devices/1
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
aug 26 19:14:36 arch_daboka systemd[1]: Started Network Manager.
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): preparing device
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): using nl80211 for WiFi device control
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): driver supports Access Point (AP) mode
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): new 802.11 WiFi device (driver: 'ath9k' ifindex: 3)
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): exported as /org/freedesktop/NetworkManager/Devices/2
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): preparing device
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> use BlueZ version 5
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> wpa_supplicant started
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0) supports 4 scan SSIDs
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: starting -> ready
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: ready -> disconnected
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0) supports 4 scan SSIDs
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: disconnected -> inactive
aug 26 19:14:42 arch_daboka NetworkManager[527]: <info> startup complete
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Auto-activating connection 'Bokros'.
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) starting connection 'Bokros'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) scheduled...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) started...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTING
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) scheduled...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) complete.
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) starting...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: prepare -> config (reason 'none') [40 50 0]
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0/wireless): connection 'Bokros' has security, and secrets exist. No new sec
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'ssid' value 'Bokros'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'scan_ssid' value '1'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'psk' value '<omitted>'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) complete.
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: set interface ap_scan to 1
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: inactive -> authenticating
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: authenticating -> associated
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: associated -> 4-way handshake
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: 4-way handshake -> completed
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireles
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) scheduled.
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) started...
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: config -> ip-config (reason 'none') [50 70 0]
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> dhcpcd started with pid 3599
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) complete.
aug 26 19:15:01 arch_daboka dhcpcd[3599]: version 6.4.3 starting
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: version 6.4.3 starting
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): DHCPv4 state changed nbi -> preinit
aug 26 19:15:01 arch_daboka dhcpcd[3599]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:01 arch_daboka dhcpcd[3599]: wlp2s0: IAID 65:59:c9:b5
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: IAID 65:59:c9:b5
aug 26 19:15:01 arch_daboka dhcpcd[3599]: wlp2s0: soliciting an IPv6 router
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: soliciting an IPv6 router
aug 26 19:15:02 arch_daboka dhcpcd[3599]: wlp2s0: rebinding lease of 192.168.1.137
aug 26 19:15:02 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: rebinding lease of 192.168.1.137
aug 26 19:15:07 arch_daboka dhcpcd[3599]: wlp2s0: leased 192.168.1.137 for 86400 seconds
aug 26 19:15:07 arch_daboka dhcpcd[3599]: wlp2s0: adding route to 192.168.1.0/24
aug 26 19:15:07 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: leased 192.168.1.137 for 86400 seconds
aug 26 19:15:07 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: adding route to 192.168.1.0/24
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): DHCPv4 state changed preinit -> reboot
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> address 192.168.1.137
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> plen 24 (255.255.255.0)
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> gateway 192.168.1.1
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> server identifier 192.168.1.1
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> lease time 86400
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> hostname 'arch_daboka'
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> nameserver '192.168.1.1'
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> domain name 'chello.hu'
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) started...
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) complete.
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_GLOBAL
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Policy set 'Bokros' (wlp2s0) as default for IPv4 routing and DNS.
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Writing DNS information to /usr/bin/resolvconf
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) successful, device activated.
aug 26 19:15:14 arch_daboka dhcpcd[3599]: wlp2s0: no IPv6 Routers available
aug 26 19:15:14 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: no IPv6 Routers available
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): link connected
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 4
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Auto-activating connection '1. vezetékes kapcsolat'.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) starting connection '1. vezetékes kapcsolat'
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) scheduled...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) started...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) scheduled...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) complete.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) starting...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: prepare -> config (reason 'none') [40 50 0]
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) successful.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) scheduled.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) complete.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) started...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: config -> ip-config (reason 'none') [50 70 0]
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> dhcpcd started with pid 4322
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) complete.
aug 26 19:15:34 arch_daboka dhcpcd[4322]: version 6.4.3 starting
aug 26 19:15:34 arch_daboka dhcpcd[4322]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: IAID 44:7f:89:66
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: version 6.4.3 starting
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: IAID 44:7f:89:66
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): DHCPv4 state changed nbi -> preinit
aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: soliciting an IPv6 router
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: soliciting an IPv6 router
aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: rebinding lease of 192.168.1.138
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: rebinding lease of 192.168.1.138
aug 26 19:15:39 arch_daboka dhcpcd[4322]: enp1s0: leased 192.168.1.138 for 86400 seconds
aug 26 19:15:39 arch_daboka dhcpcd[4322]: enp1s0: adding route to 192.168.1.0/24
aug 26 19:15:39 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: leased 192.168.1.138 for 86400 seconds
aug 26 19:15:39 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: adding route to 192.168.1.0/24
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): DHCPv4 state changed preinit -> reboot
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> address 192.168.1.138
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> plen 24 (255.255.255.0)
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> gateway 192.168.1.1
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> server identifier 192.168.1.1
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> lease time 86400
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> hostname 'arch_daboka'
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> nameserver '192.168.1.1'
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> domain name 'chello.hu'
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Commit) started...
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Commit) complete.
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_GLOBAL
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Policy set '1. vezetékes kapcsolat' (enp1s0) as default for IPv4 routing and DNS.
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Writing DNS information to /usr/bin/resolvconf
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) successful, device activated.
aug 26 19:15:47 arch_daboka dhcpcd[4322]: enp1s0: no IPv6 Routers available
aug 26 19:15:47 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: no IPv6 Routers available
ping -c 10 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=4.38 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=2.79 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=4.89 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=5.30 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=1.59 ms
64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=1.61 ms
64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=4.37 ms
64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=2.40 ms
64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=6.47 ms
--- 192.168.1.1 ping statistics ---
10 packets transmitted, 9 received, 10% packet loss, time 9014ms
rtt min/avg/max/mdev = 1.599/3.759/6.471/1.627 ms
ping -c 100 8.8.8.8 - it's not completely disconnected, but it's always 8 packets at once that are received
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=20 ttl=46 time=41.7 ms
64 bytes from 8.8.8.8: icmp_seq=21 ttl=46 time=40.0 ms
64 bytes from 8.8.8.8: icmp_seq=22 ttl=46 time=38.8 ms
64 bytes from 8.8.8.8: icmp_seq=23 ttl=46 time=39.3 ms
64 bytes from 8.8.8.8: icmp_seq=24 ttl=46 time=41.8 ms
64 bytes from 8.8.8.8: icmp_seq=25 ttl=46 time=38.4 ms
64 bytes from 8.8.8.8: icmp_seq=26 ttl=46 time=38.4 ms
64 bytes from 8.8.8.8: icmp_seq=27 ttl=46 time=38.0 ms
64 bytes from 8.8.8.8: icmp_seq=56 ttl=46 time=43.4 ms
64 bytes from 8.8.8.8: icmp_seq=57 ttl=46 time=49.8 ms
64 bytes from 8.8.8.8: icmp_seq=58 ttl=46 time=40.2 ms
64 bytes from 8.8.8.8: icmp_seq=59 ttl=46 time=44.3 ms
64 bytes from 8.8.8.8: icmp_seq=60 ttl=46 time=38.5 ms
64 bytes from 8.8.8.8: icmp_seq=61 ttl=46 time=43.4 ms
64 bytes from 8.8.8.8: icmp_seq=62 ttl=46 time=39.2 ms
64 bytes from 8.8.8.8: icmp_seq=63 ttl=46 time=40.5 ms
64 bytes from 8.8.8.8: icmp_seq=92 ttl=46 time=38.3 ms
64 bytes from 8.8.8.8: icmp_seq=93 ttl=46 time=43.7 ms
64 bytes from 8.8.8.8: icmp_seq=94 ttl=46 time=42.3 ms
64 bytes from 8.8.8.8: icmp_seq=95 ttl=46 time=46.6 ms
64 bytes from 8.8.8.8: icmp_seq=96 ttl=46 time=44.9 ms
64 bytes from 8.8.8.8: icmp_seq=97 ttl=46 time=42.9 ms
64 bytes from 8.8.8.8: icmp_seq=98 ttl=46 time=41.7 ms
64 bytes from 8.8.8.8: icmp_seq=99 ttl=46 time=37.8 ms
--- 8.8.8.8 ping statistics ---
100 packets transmitted, 24 received, 76% packet loss, time 99062ms
rtt min/avg/max/mdev = 37.886/41.455/49.829/3.000 ms
cat /etc/dhcpcd.conf - I tried clientid instead of duid and disabling IPv6, but neither of those helped.
# A sample configuration for dhcpcd.
# See dhcpcd.conf(5) for details.
# Inform the DHCP server of our hostname for DDNS.
hostname
# Use the hardware address of the interface for the Client ID.
#clientid
# or
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
duid
# Persist interface configuration when dhcpcd exits.
persistent
# Rapid commit support.
# Safe to enable by default because it requires the equivalent option set
# on the server to actually work.
option rapid_commit
# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
# Most distributions have NTP support.
option ntp_servers
# Respect the network MTU.
# Some interface drivers reset when changing the MTU so disabled by default.
#option interface_mtu
# A ServerID is required by RFC2131.
require dhcp_server_identifier
# Generate Stable Private IPv6 Addresses instead of hardware based ones
slaac private
# A hook script is provided to lookup the hostname if not set by the DHCP
# server, but it should not be run by default.
nohook lookup-hostname
#noipv4ll
#Disable IPv6
#noipv6rs
#noipv6
cat /etc/NetworkManager/NetworkManager.conf
[main]
plugins=keyfile
dhcp=dhcpcd
## Set static hostname
#[keyfile]
#hostname=foobar
## HTTP-based connectivity check
#[connectivity]
#uri=http://nmcheck.gnome.org/check_network_status.txt
I couldn't find anything else to append, but if there are other log or conf files or anything else, which would help solving the problem, I should put here, please tell me.Try to use dhclient perhaps? Might I also suggest letting systemd deal with the dhcp issue and not NM. That may seem incongruous but it is possible NM is mis-handling the dhcp hand-off to the network card. I'm no guru but I got thinking about this when I saw this in your output:
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
It is very possible that I'm mis-interpreting this information so please take it with a boulder of salt. -
every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.
This may sound silly but try your date a time setting my ipod had the same problem and i had even checked the the date and time went all the way to the apple store for help and the genius guy just rest the date and time and it worked just fine.
-
I have turned home share on my iPhone and my Apple TV and the remote app doesn't work all of the sudden. How can I fix this?
Welcome to the Apple Community.
Have you updated to the latest version of the Remote App. -
Earbuds remote control doesn't work anymore!
Hi!
I've had an iPhone 4 since September 2010, and I've always used the earbuds that came with him.They used to work great until this week.
Now, it's buillt-in remote control doesn't work anymore.By that I mean I can not skip, pause or even use voice control through the earbuds.
And this probably isn't an iPhone problem, because I tested these earbuds in my iPad 2 and the remote control still doesn't work.
I noticed that the rubber that used to cover the cable itself is coming off, especially near the remote control area.
Is there a fix for these unresponsive controls?
Or what Apple email I should reach in order to ask them about this issue?
Thanks!
My iPhone 4 is running iOS 5.0 and so is my iPad 2.Is your phone locked in portrait orientation? I've found that for some reason my controls will not work when my portrait orientation is locked.
Try double-clicking the main button, and then sliding your thumb right. You should get some controls at the bottom of your screen, and the button on the far left is the Portrait Lock button. Try unlocking your phone, and see if your earbuds will then work.
Hope that might help!
-Dave -
RD Web access SSO - remote desktop doesn't work
Hi,
This is my first post in here, and I hope you gays can help me out.
I am currently experiencing some issues with RD Web SSO not working as I would like it to work. I have found countless articles and guides describing how to get it to work, but no guide have yet helped me.
The problem is that when I log in on the web access and open a published application everything works fine I wait 5 sec and the application pups up, but when I try to open "Remote Desktop" then I get a new log in box where I must enter my log in credentials
again (after entering my credentials everything work great.)
The problems I am currently facing is produced in a demo environment configured as follows:
1x DC server (DC01) also the lic server
2x RDS server (RDS01/02)
1x RDS Connection broker (RDCM01) I have created a farm named "farm01.mydomain.com"
1x RDS Web access server (RDWA01)
1x RDS Gateway (RDSGW01)
(All the Servers are installed with Windows server 2008 (R2) SP1, and have the latest update.)
I am publishing my demo environment on the internet, i have created a domain name for my gateway and my web access and they are both accessible from the web (rdwa.mydomain.com and rdsgw.mydomaim,com). I also have secured everything with an SSL wildcard certificate
( my external and intern domain names are the same so I am using one SSl certificate) that is trusted on the web.
when I log in on the web access server trough (IE9 or IE8 ) from another network(wan) and I open a published application (calculator), it pop ups in just a few seconds. But when I try to open my Remote desktop I get a login box where I must enter my
username and password one more time.. after that remote desktop opens and everything works great.
My laptop is a Windows 7 professional with RDP 7 and IE 9, and is not member of a domain (just a workstation), I have tested it from multiple workstations and networks(Also win 7 and RDP7) but even there I have the same problem.
Thinks that I have tried tell now:
I have created a kerberos account as mentioned on
MSDN
I have checked my group permissions as mentioned
here
And many more blogs and forums
I have tried multiple settings on RDCM, RDWA, RDSGW and RDS server
Right now I am out of ideas, and I hope you gays can help me out..
thanks in advance,
PouyanThnx for you advise,
Did you go into your RemoteApp Deployment settings and change the server name to the farm name "farm01.mydomain.com?"
Yes
Also in the Session Broker's RemoteApp and Desktop Connection Properties window change the Connection ID to the farm name as well.
actually I couldn't find out what to put on the connection ID so I had left it just default, but after changing it to the farm name it still doesn't work
Did you sign you apps with the cert used on your RDS servers?
yes, I am using a wildcard ssl certificate to sign all the servers/apps with.
there is
something that
strikes me, when I log on the web access and click on a published application (that is hosted from the same RDS servers) then I get a information box. when I click on the "details" button I see on the bottom "use the following credentials to connect" and my
domain and username are published there. But when I click on the "Remote desktop" icon and do the same I can't see this information!!
Also I don't think that its an SSL problem, because after log in again it works perfect without any warning. -
After updating my iphone 3G and my ipodtouch 3G ios5, universal dock and remote control doesn´t work
After updating my iphone 3G and my ipotouch 3G with ios5, the apple remote controls (the white and the aluminium one) doesn´t react when iphone or ipod are docked at the universal dock. The remote controls both still work with my Macbook, therefore it must be a problem with the dock. I have tried to connect both with the dock (Menu + left for 6 seconds) but it doesn´t help. Further the volume control doesn´t react on the iphone and the ipod when they are docked. Neither the one on the touchscreen nor the buttons. The day before the update everything was fine. Anyone any idea?
Thanks!Look at the previous posts on the right under the heading: "More Like This". I appears that others are having the same problem.
-
So I cannot figure this out. For some reason when I use the Remote app it doesn't work right. In iTunes it does not come up under the devices tab. I have tried both with and without my iPod connected and for some reason it just isn't working for me. I would really appreciate soem help because this app seems awesome to me.
In iTunes 8:
Go into your iTunes preferences and select the Devices tab. Make sure "Look for iPhone and iPod Touch Remotes" is selected. If it already is, try clicking "Forget All Remotes"
In iTunes 7:
Go into your iTunes preferences and select the Advanced tab. Select the General tab beneath it, and make sure "Look for iPhone and iPod Touch Remotes" is selected. If it already is, try clicking "Forget All Remotes"
You also want to be sure that both devices (the computer and the iPod) are connected to the same wireless network.
CG -
Apple Remote controll doesn't work
hi there.
I have read, that the Apple Remote Controll, that can be used for things like iPhoto & iTunes can also be used to controll Logic 8, starting and stopping playback ... .
Doesn't work at my system. Is there anything i have to setup? Have heared it should work by default.
thx for helpIn iTunes 8:
Go into your iTunes preferences and select the Devices tab. Make sure "Look for iPhone and iPod Touch Remotes" is selected. If it already is, try clicking "Forget All Remotes"
In iTunes 7:
Go into your iTunes preferences and select the Advanced tab. Select the General tab beneath it, and make sure "Look for iPhone and iPod Touch Remotes" is selected. If it already is, try clicking "Forget All Remotes"
You also want to be sure that both devices (the computer and the iPod) are connected to the same wireless network.
CG -
I am using 2011 SP1 version of LabVIEW, toolkits and add-ons. I am trying to make the following remote panel opening VI work.
This used to work well on LabVIEW 8.5 but now I get an Error 7 from the last Invoke Node of the second loop. The top loop works fine. HPAC Main.vi is running as a startup VI on the RT target (PXI-8106). I can open its front panel using this VI. But the second loop can't open ST_viewer 1.vi. File names and paths are all correct. For building HPAC.rtexe, on the Source Files tab, HPAC Main.vi was chosen as a startup VI while ST_viewer 1.vi was put in the Always Included box. The VI server of the PXI is using TCP/IP port 3363. The PXI is directly connected to this host PC by an Ethernet cable.
I also made a very simple project (attached file named ServerTest), deployed its rtext to the PXI and ran it as startup. After rebooting, I tried to open the remote front panel of main.vi and sub.vi on the PXI using access.vi. I get the following errors at the Invoke Nodes.
For trying to open main.vi > Error 1352: Requested VI is not loaded into memory on the Server Computer
Fro trying to open sub.vi > Error 7: File not found......
As suggested in the article, Real-Time System Manager seems useful but I can't find it. Tools > Real-Time Module > and then I can't find the system manager. I only see Project Wizard, Configure Time-triggered Network and Execution Trace Toolkit. Does 2011 version have something else?
Any help will be appreciated!
Attachments:
HPAC Executable.vi 33 KB
ServerTest.zip 215 KBThank you, JaymeW. I found the VI States tab in the Distributed System Manager. And yes, all the steps in that article were already done.
If I set sub.vi as a startup VI on the PXI along with main.vi, then I can open it using the same method that opens main.vi. However, if I put sub.vi in Always Included box on Source Files tab and use the VI server to open it, I get errors.
On the VI States monitor, I see main.vi running as a startup VI on top level when I turn on the PXI. Then, I run access.vi and open main.vi successfully. When I click the sub.vi open button, sub.vi appears on the monitor with Run Top Level status but I get error messages.
At the first attempt to call the remote front panel of sub.vi, I get:
LabVIEW: Resource not found.
An error occurred loading VI 'lvfpp0.vi'.
LabVIEW load error code 3: Could not load front panel.
From the second call, I get:
Error 1000 occured at Invoke Node in access.vi
Possible reason(s):
LabVIEW: The VI is not in a state compatible with this operation.
Method Name: Run VI.
Could you take a look at the attached simple project and suggest a solution? Thank you!
Attachments:
ServerTest2.zip 218 KB -
I have installed the new iOS 5 on my Iphone 3GS and my bluetooth connection for my Philips bluetooth headset doesn't work anymore. Does anybody have a solution?
I have checked the headset on another Iphone with iOS 4 and it works well.
Thanks for your help!
Pierre (from Paris - France)Bonjour Pierre,
there seems to be a bug in iOS5 with regards to Bluetooth. THere are a lot of threads in here on this. We're all waiting for Apple to fix this... -
My new internet connection doesn't work on my mac
I have an early 2008 Mac Book Pro 15inch and I just changed my internet provider. Now some websites don't charge or it takes them forever to do it. Some charge just fine. The internet connection is working great because I used it also on my iPod, iPhone and a PC laptop. I have a Mac OS X v10.5.8 and my Safari version is 5.0.6 (5533.22.3). I don't know what it is. I mean I can connect to the wi-fi signal but it doesn't work like it should. I still have the old internet connection for a few more days, and when I use it it works just fine like it should. Please help me if you have any ideas on how to fxs this problem. Thanks!!
I have a Mac OS X v10.5.8 and my Safari version is 5.0.6 (5533.22.3).
Your operating system version and Safari are severly outdated and possibly compromised by the Flashback botnet.
It might be your new ISP see's it and is blocking your machine in order to get you to fix your problem.
I suggest you get offline, then backup your users files manually to a external drive (emergency quick copy method)
Most commonly used backup methods
then take your machine (and all your disks and software) to a local PC/Mac specialist and have them upgrade your machine with a fresh install of 10.5 + programs (including iLife) then upgrade to 10.6.8. Snow Leopard.
They wil have to order a disk overnight, but after that it should be done.
Also max the RAM, upgrade the hard drive to 7,200 (no hybrids or SSDs) and have them check behind your fans for dustbunnies. Clean the machine.
Do not go to 10.7 or 10.8 on that machine, it's too old and at it's end of life stage, also you don't want to spend more money having to replace nearly all your software that 10.7-10.8 requires.
That machine is five years old, it's about to die, unless you haven't been using it much. but you can likely can get another 2 more years out of it with the steps I mentioned.
Later you can use the new internal drive for backup on a new machine if and when it does die. (it might not!)
If you take the machine to Apple, then they are going to hobble it with 10.7 or 10.8 and not install 10.6, also charge you a fortune for a new drive and RAM, that your just going to get a new machine instead.
When you get 10.6 installed, install Firefox web browser as it gets updates and much faster, Apple did not release Safari 6 for 10.6 -
Remote Control Doesn't Work in Win-7 !!!
After upgrade operating system to win-7 Remote Control Stop Working !!
and the ENE CIR Already installed ...
but it's still Don't Work
My Remote Details : RC1762302/00
3139 228 50021
Hp SPS :435743-001
HP:HSTNN-PRO7
RC6 IR
cp04 30801 j 064454 REVB
and this pic 4 it http://img44.imageshack.us/img44/971/846610569l.jpgI too have this exact same issue. The play, stop, forward, reverse buttons don't do anything, and also the sound buttons, they activate the volume window but not adjustment of the volume happens. The only buttons that work are the opening of applications and the power button. All this happened after I installed some free updating software for some other paid and free applications I have (Advanced SystemCare Professional), all quite legitiment, as a result there were corrupt icons and I had to uninstall the offending software and some corrupted software including Microsoft Office beta and reinstall... no viruses were found on a full Zonealarm scan. I have the DV6-2113TX on Win-7. If ANYONE has a clue how to fix the full functionality of the remote, please let me know as it's really niggling me that it just doesn't work even after reinstalling the drivers for the IR etc.
I tried contacting HP online and I get NO replies. I am yet to phone. It is still under warranty with 20 months left (8 months manufacturer, 12 months supplier).
cheers
Jasen -
IPlanet Web Proxy Server 3.6 SP 5 Persistent Connection doesn't work
I use iPlanet-Web-Proxy-Server/3.6-SP5 on Soloaris. and trying to use persistenet connection functions in forward proxy through setting keep alive to "ON". But I found this functions doesn't work at all. The following trace is the HTTP Header info i got from receiver.
1. The HTTP Header info without using Proxy Server
Request headers :
proxy-authorization: Basic YXBwLWVtcXVzZXI6MTIzNDU2Nzg=
connection: Keep-Alive
proxy-connection: Keep-Alive
server: IBM WebSphere MQ internet pass-thru V1.3.2
accept: application/octet-stream
host: 10.1.13.43:1414
user-agent: 10.1.72.254:1414
content-type: application/octet-stream
content-length: 132
accept-encoding: identity
2. The HTTP Header info using Proxy Server
Request headers :
server: IBM WebSphere MQ internet pass-thru V1.3.2
accept: application/octet-stream
host: 10.1.72.254:1414
user-agent: 10.1.72.254:1414
content-type: application/octet-stream
content-length: 132
accept-encoding: identity
date: Mon, 06 Sep 2004 18:04:12 GMT
forwarded: by http://iaccess.mor.cr:8085 (iPlanet-Web-Proxy-Server/3.6-SP5)
via: 1.1 S1PS,1.1 S1PS
I found Kepp-Alive information ( "connection: Keep-Alive" and " proxy-connection: Keep-Alive")
was taken out by proxy server.
Is a proxy server bug? Can I do something to make it work?
Regards,
songtaoHi
This as per the HTTP/1.1 RFC (RFC2616)
The Connection general-header field allows the sender to specify options that are desired for that particular connection and MUST NOT be communicated by proxies over further connections.
The Connection header has the following grammar:
Connection = "Connection" ":" 1#(connection-token)
connection-token = token
HTTP/1.1 proxies MUST parse the Connection header field before a message is forwarded and, for each connection-token in this field, remove any header field(s) from the message with the same name as the connection-token. Connection options are signaled by the presence of a connection-token in the Connection header field, not by any corresponding additional header field(s), since the additional header field may not be sent if there are no parameters associated with that connection option.
Read the following at
http://www.w3.org/Protocols/rfc2616/rfc2616-sec8.html#sec8.1.3
and
http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.10
Regards
Nagendra HK -
My remote Control doesn't work with my new imac
I have a brand new iMac 27" with mountain lion, and Doesn't work with my aluminium remote control, I already follow the steps on Help, but there's no IR option on the advanced button of security and privacy. Of course I already check with my iphone dock and the batteries are OK, So I think it's a bug from the OS.
Any thougths?Thanks mende1.
Apple that, *****!!
Maybe you are looking for
-
Oracle Install Base Interface Error
Error: The source item instance 33604, in Subinventory 4131, for Organization 734 in Oracle Install Base does not exist. Please verify that any receipt transations were successful. I have checked values by running the following SQL: select Instance_I
-
Has anyone had problems exporting files out of LR3? This was very simple in LR2. I receive orders via email, print them out, and then pull up the selected images 1 or 3 or 50 @ a time. LR3 is not exporting over 1 or 2 images and then it freezes up.
-
Here are my results after 2 weeks working with Logic 7.2 and Protools 7.1cs4 (since yesterday 7.1cs5). The PT 7.1cs5 update is recommanded for the Logic 7.2 users Stereo output meter balance in Logic 7.2 is still wrong: (since 7.1.1 or longer) The ra
-
I am trying to update the operating systems on I pod touch 3rd generation.
I am trying to update my operating systems on I pod touch, 3rd generation. The instructions say: Settings General Updates I don't have an updates options on my i pod touch?
-
Intel SpeedStep and Fan not working
Hello, I have an older Toshiba laptop: Satellite M30 (PSM30C-7100K). A couple of years ago I had replaced the motherboard but have not noticed until now that the fan is never on and that the CPU is always stuck at 600MHz (Capable of 1.6GHz). I have