Company user - how to stop creation of groups??

Hi all,
I am using the standard company user feature for enabling the approval of the new user registrations in the portal.
I have set "ume.tpd.companies = 1" , i.e. One company option. This will enable the approval process for the new user registrations.
But this will create a new group for every new company name which a new user gives while registering. For example, if user A is registering who is from XYZ company-then this will create a new group named "SA_XYZ" in the portal and add user A to that new group and if there is already a group existing with that name, then it will add him to that group to that group directly.
My problem is that I dont want this group creation to happen. Is there any way of stopping this creation of groups, but still have the approval process in place.
If any one has worked on this earlier,please help me in this.
Regards,
Narahari

I have found the solution,
I have used the user exit RV60AFZC and put a check in there to see if for the returns sales order delviery is created and Post goods receipt is done for the same.
This check works at the time of using VF01 transaction.
If no post goods receipt is done it will give an error message.
deepak

Similar Messages

Strategy 82----How to stop creation of New Production Order

Hi All,
My client is facing problem with the material which having Strategy 82- Assembly to Order, As when they make a sales order , w,.r.t that a Production order is made automatically by system,. User complete the production process and deliver this material , now when ever the Sales user change "Credit Block: in that particular sales order again a New production order created to this sales order, How to control his creation of new Production order? As if new production Order create it brakes the link between Sales order and the previous Production order which is already in delivered status.
Your Prompt response will be appreciated.

HI ,
I am closing this thread , as I know how to got a control on trhis, As of behaviour, startegy 82 says every time u change in sales order it will create a new Production order during saving, if the previous order is not been in ONLY REL status. So the only option to control this is in S.O ,change the Item category to "CN" i.e NO MRP when if required there has been any modification to S .O. In std SAP system item catageory has to be congiured , in SPRO SALES we can do the necessary settings.

How to stop updating TRDAT ,PWDLGNDATE in USR02 table while log on through dialog user

Hi Every One,
when ever user logon to sap system TRDAT,PWDLGNDATE updates the current date on which user logon but i don't want to update it for some of my dialog users how to stop this is there any parameter is there to set please help me

Hi,
This is SAP Business one system administration forum. Please find correct forum and repost above discussion to get quick assistance.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

How to stop users not in any group and users from other groups accessing sites they have no permission to access on top link bar?

Hello Community
    Using SharePoint 2010 Server and UI, a web application
was created with subsites.
    The subsites have unique permissions and Owner, Member
and Visitor groups.
    The problem is however even if a user does not exist
in a group that user can access the top link bar/navigation
bar and its sub sites.
    Also any user in any group can access any top link bar/navigation bar and its subsites.
    How do you enforce that if a user is not in a group
they are denied access the top link bar/navigation bar and its
subsites?
    Thank you
    Shabeaut

If you are using the built in SharePoint navigation links, SharePoint will automatically hide links to sites that a given user doesn't have access to.
The problem is, it sounds to me like you have a fixed top link bar that lists the content and if a user doesn't have access, the link still shows up.
You may want to look at how the top link bar was encapsulated in the design of the page. If it isn't wrapped in the permissions provider code, that could be the problem.
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint

How to stop PR creation from PM work order for a particular vendor?

Hello Experts,
We have following scenario for breakdown maintenance activities.
When a machine breaks down, a breakdown order is created in SAP. The external manintenance services are planned in the order. When the order is released, a single PR (with multiple item numbers corresponding to number of services) is created by SAP. The PR has a release strategy. When PR is released, PO is created followed by the SES.
The practice followed AS -IS for breakdown outside business hours:- If the breakdown happens outside business working hours, the person releasing the PRs is not available & hence PR can not be released resulting in no PO & no subsequent SES.
In this case, the maintenance is completed by the external agency & the work order is TECO. The next day, TECO is reveresed, new PR is created, released, converted into PO, & then SES.
TO-BE process:- Client expects that, for certain vendors identified, PR should not get created at all from the breakdown order. (The list of vendors will be maintained seperately). For these vendors, a framework order will be created at the start of fiscal year & SES will be created as & when required agaainst the framework order.
My concern is :- How to stop PR creation from PM work order for a particular vendor? OR delete the created PR?
Highly appreciate your quick response.
Thank you.
Amit
Note:- My ABAP consultant has checked following BADI's, but could not find it useful.
IWO1_ORDER_BADI
ORDER_COSTING_CK
DATA_EXTENSION_CK
VALUATION_CK
ME_REQ_OI_EXT
IWO1_PREQ_BADI
ME_CHECK_SOURCES
ME_REQ_POSTED
IWO1_ORDER_BADI

Dear Amit
I am giving a different dimension to your question check if it fulfills your requirement -
As we know Vendor selection comes at a later stage only after your PR creation, approval & RFQ etc. & PR generation from maintaine. order is controllled through control key PM03. While triggering PR from order you have to specify Material group, Purchase group and vendor. Try to control it through authorisation as all these are authorisation objects. The persons executing breakdown order shall no t be given this authoriations
shakti

How can we have an anonymous 'User i.d." for discussion group posts only?

hi. Here we are asking a stupid Q on very first post. How can we have an anonymous 'User i.d." for discussion group only? Seem to be stuck with our regular old original Apple i.d. I see how that can be changed, but don't really want to cuz just want to have my posts signed with a more anonymous i.d. name. Should be simple to do, but not obvious to us now.
Thnx

Welcome To  Discussions thelnukus!
The Alias of the account you are using, cannot be changed, but you can create a new Discussions Account, with an Alias that you prefer.
You cannot delete your present account. Just stop using it, after you have created a new one.
You can use all of the same info in the new account, Email address, User name, etc, just be sure to insert a new Alias of your choosing.
But your Level(0), Points(0), Total Posts(2), Total Posts Online(2) and Registered Date(12/19/06), will not be transferred.
In the new account, your Post Counts, Points, & Level Status will all start at 0. Your Registered Date will be the date you create the new account.
Your old account, with your previous counts & level, will still be viewable, under the old Alias.
(You really don't have anything accumulated, to be concerned about though.)
After you quit using the old account, those 2 posts, will be archived. What that means is, that if there are no additional responses in the Threads they reside in, the Topics will get continually pushed down on the Topics list. After a certain amount of time, maybe 2 to 6 months, the Threads will be locked, so no responses can be entered. But the Threads will not disappear.
Threads in heavily trafficked Forums, may be archived more rapidly than those in areas, with less activity.
The Topics that you started using the old account, will show your Old Alias, in the Author field of a main forum page, but eventually, readers will have to keep going to the succeeding pages to view them.
If someone were to do a Discussions Search, using these parameters:
Restrict by Category or Forum: All Categories
Restrict by Date Range: All
Restrict by Username: Your Old Alias
all of your posts, created since about 11/13/05, would be found.
To create a new account,
Log out of Discussions. You also may have to delete the Apple Cookies in your browser preferences, but I'm not sure this is necessary. Then follow either of these instructions.
-How Do I Create My Account?
If you haven't signed up for an Apple ID for the Apple Store or AppleCare Support website (or forgot your old one), you can create a new account on the My Info webpage. Just click the "create one" link on the right side of the My Info page. Choose your country location and preferred language from the appropriate pop-up menus, then click Create Account. In the resulting page, enter a unique name (such as your email address) in the Apple ID field and fill in your other relevant information accordingly (fields marked with * are required). Click Continue to complete the process.
-To register, click Login in the sidebar on the right side of the Discussions page. In the resulting page, click the "create one" link at the bottom of the page, then click "create one" in the subsequent page and follow the instructions to create an Apple ID. For more information, see the Apple ID FAQ page.
Those instructions, and more info, can also be viewed by clicking on ?Help & Terms of Use, in the right column of Discussions pages.
ali b

How to stop the Company Code popup window in MIRO!

Hi,
When User logs in the system and enters into the MIRO transaction, he is asked to enter the Company Code first in order to proceed further. I know that once you enter the company code then the system does not ask it to enter again during that login, however, it will asks again whenever User login the system again!
Can someone tell that how to stop this Company Code popup window in MIRO, so that the system should not ask for the Comp Code whenever User logs in and enters into MIRO? I think there are some entries maintained in the User Master for this!
Thanks.

Hi,
It is Necessary for the user to enter the company code for which he need to process the Invoice.
First think is if the user knows ,that he is only going to do for one company code.then
in the T code SU3.
In the parameter TAB
you can make the Default value for the parameter ID BUK as your Comany Code value ( Eg 1000)
so that when ever the user does the MIRO ,it comes with that company code only.
and if he want to do for another comapany code ,he has to use the option of Switching the comapny code.
so this is user dependent and has to be made for all users.
Note .the above setting works only you have entered saved and logged off and log in again.
also ,this value gets defaulted you all the comapny codes in all screen.
Hope so it helps.
Regards
Anjanna.

How to stop the Flex application when user clicks on Cancel button from JS-confirm message?

Hi All,
I use the next code when a user clicks on a link:
private function clickHandler():void
      ExternalInterface.call('confirm', 'Of course you want to go to the Adobe forums!');
      navigateToURL(new URLRequest('http://forums.adobe.com'), '_self');
This will show up the javascript confimation box. But when the cancel-button is clicked, the user goes straightly to http://forums.adobe.com...
How to stop Flex performing the next code when a user clicks on the Cancel button?
Or, how to catch which button is clicked by a user in Flex?
Thanks!

I agree with Mr. Hall that using mx.controls.Alert in Flex may be a better route.
Show the Alert like this:
// show an alert with a question and yes and no choices
Alert.show( "Would you like to go to the Adobe Forums?", "Question",
     Alert.YES | Alert.NO, this, closeHandler, null, Alert.YES );
Then handle the response in the closeHandler() function:
protected function closeHandler( closeEvent:CloseEvent ):void
if( event.detail == Alert.YES )
     navigateToURL( new URLRequest('http://forums.adobe.com'), '_self' );
else if( event.detail == Alert.NO )
     // they chose no
The following documentation on Alerts may be helpful:
http://www.flexafterdark.com/docs/ActionScript-Alert
Let me know if that helps...
Ben Edwards

How to permanently stop creation of .DS_Store files on desktop?

Ever since attempting to use .ds_store on Terminal to find hidden iTunes files, the system will not stop creating .DS_Store files on the desktop. I've tried using the defaults write com.apple.desktopservices DSDontWriteNetworkStores true command, to no avail. I'm relatively new to using Terminal, so if someone could offer any tips, that would be good. The file creation is more of an annoyance than a real problem, but I want to know how to stop it, since there is no info on this in other places. Thanks! ~ Eva

The DSDontWriteNetworkStores command only prevents creation on shared network drives.
.DS_Store files are always created locally (unless using something like TotalFinder to prevent that)
The reason you now see them on the Desktop is likely because during the process to track down iTunes files you enabled the option to "see" hidden files - issue the following command in Terminal to "undo" that:
defaults write com.apple.finder AppleShowAllFiles false
If you want the change to be immediate (rather than after logging out & back in or rebooting) then simply "restart" the Finder app, again in Terminal:
killall Finder
Johnny.

How to stop the users from changing the Decimal in SAP

How to stop the users from changing User Profile

Hai,
It is not possible to restrict SU3 to display, because it has only S_TCODE has the authorization object.
If you really want to restrict users from changing their profile you have to remove the SU3 access and give SU1 or SU2 which gives access only to Personnel details and Parameters.
Hope this helps.
Regards,
Yoganand.V

How to add user from domain A to a group in domain B

How would you acheive adding a user from domain A to a group that is in domain B via powershell without the Quest cmdlets? I've been trying to figure this out for about a week now. Please let me know if the scripting guy has seen this issue before.
LittleTech

Hello jrv,
Here's what i was trying to do. The two domains im working with have a trust between them.
1. Create a user in External.Domain.Com
2. Add the user in External.Domain.Com to GroupOne in ExternalDomain2.Domain.com
3. The only knowledge that ExternalDomain2.Domain.Com would have about the account in External.Domain.Com is whatever is in the Global Catalog. Here is what im trying, but it isn't working.
#Connecting to domain PSDrive
New-PSDrive
-Name
ExternalDomain
-PSProvider
ActiveDirectory
-Root
-Server
DC01.Domain.com
cd
ExternalDomain:
#Create user
#Add to ExternalDomain Groups
$UserDN=Get-ADUser-LDAPFilter"(sAMAccountName=$UserID)"
#Connecting to domain2 PSDrive
cd
AD:
$GroupDN="CN=Wireless
Device Users,OU=Wireless,OU=Systems and Technology,DC=External,DC=Domain2,DC=Com"
Add-ADGroupMember-Identity$GroupDN-Members(Get-ADObject-Identity$UserDN.DistinguishedName
-Server"DC01.Domain.com:3268")
Connecting via port 3268 allows me to talk to the global catalog instead of LDAP.
I receive the following message: A Referral was returned from the server
I know that if i connect using [ADSI] i am able to specify that the connection follows referrals, the AD cmdlets seem to not have that function. The Quest AD cmdlets do... I just dont want to have to use third party cmdlets to do what the AD cmdlets should
be able to do in the first place.
THanks,
LittleTech

My new nano keeps going into sleep mode every copy of minutes while music is playing. I can't figure out how to stop this. The user guide isn't too helpful. Any ideas?

My new nano keeps going into sleep mode every copy of minutes while music is playing. I can't figure out how to stop this. The user guide isn't too helpful. Any ideas?

This is usually a sign that your iPod's headphones are not plugged in all the way. Make sure that you cannot see any of the silver still showing from the headphone's plug. You should hear a sort of popping/clicking noise when inserting the headphones letting you know that they have been fully seated.
B-rock

How to stop G/L from defaulting material group in work orders

Whenever we create a work order, the material group is pulled from the material master. But, if we have a component on a work order and don't enter in a material number, the material group defaults to electric supplies. From my research, it looks like it is doing this defaulting based upon the default G/L account assigned to components of work orders. Does anyone know how to stop this defaulting?
I might be completely off and it's not related to G/L which in that case this is not the correct forum, so if someone is knowledgeable about this let me know and I can switch the forum areas.
Thanks,

hi ,
Please check the Account Assignment In Po you have created .
for expamole if Po is created with account assignment ctegourt K than account modification is VBR
as in below Path and screen shot
Now check Material group valuation class if you are short text in PO or material master valuatiobn class if you are material Number . For expamaple its is 0001 liek ypur case . Now
Check combination in OBYC in GBB transction for VBR( Assignment category is K in PO ) and valaution class ( of Material master or material group )
Many Thanks

How can I rise limit of number of users on an server in logon group (SMLG).

Hello
How can I rise limit of number of users on an server in logon group (SMLG).

In that case, you have not done your Sizing correctly. If users are more on all the Servers, then your performance is hampering, which is leading to delay in Response time.
So the first course of action is to proper gathering of logging of users & as per that, you need to increase app server.
Also check out how the Operation modes has been divided...if Dialog users are more & BGD users are less in Morning time (IST) for example you can have Switching of Dialog users by which your processes are occupied more for Dialog users, therefore more no of users can log in & vice-versa.

When send email with emoticons to a pc user, emoticons show as an empty box. Also, email content has a symbol on every line. How to stop this from happening?

When send email with emoticons to a pc user, emoticons show as an empty box. Also, email content has a > symbol on every line. How to stop this from happening?

Dear Mr. Toad (my all-time favorite ride at Disneyland ;-) ..
Thanks so much for your detailed reply.. my netbook is in the bedroom, turned off.. I (so far) only use it in the evening, in the bedroom.. I've saved your response, and will try your suggestions, and let you know if they solve the problem I described. I really appreciate you taking the time to post such a detailed reply..
I can't answer your Thunderbird "configuration" questions, because I'm in the living room, using the crap Vista laptop, on which I plan to install Thunderbird, and then take Windoze Mail out in the street and drive over it a few times.. I'll get back to you one way or the other, and let you know if your instructions solved the problem, or not..
I don't understand why Thunderbird "out of the box", so to speak, simply doesn't forward HTML emails with embedded graphics, (like Outlook Excess, and Winblows Mail do).. without having to go through those steps. I personally HATE HTML email, but over the years, it's become more and more prevelant.. so it's a problem I must fix..
Thanks again..
Harv..

Company user - how to stop creation of groups??

Similar Messages

Maybe you are looking for