Compaq 1200 won't boot

hey, since you guys are so smart and usually superior to pc forums...
Anyonw knows why my compaq 1200 won't turn on?
It doesn't even reach the boot screen, but the harddrive starts spinning. it seems to be a common problem, but there is no solution available online (unlike in these holy halls). thank god i also have a mac, so now i can write this mail

Oh! i need the laptop back because my mac doesn't recognize my garmin 12xl.
it's because i don't have the keyspan usb to serial adapter.
i on;ly have the digitus one and the driver doesn't seem to work.
so, if you don't know the c1200 one, i would accept alternative answers for how to get the digitus (prolific) adapter.
Thank you so much

Similar Messages

HP Compaq 6715s won't boot on battery after BIOS update

Hello!
I updated the bios of my HP Compaq 6715s with the latest version F.0E I downloaded from HP support site.
Everything went fine, but now it won't boot on battery alone anymore. It just flashes amber light on power indicator and shuts down. If the charger is connected and later disconnected when it starts loading Windows, everything is fine.
Please help, what should I do?

Hi:
You can try performing a hard reset of the notebook in hopes that it will solve the problem.
Here is the link to the instructions for this procedure.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01684768&prodT...
If that doesn't work, I'm afraid something went kerflooey with your BIOS udpate.
Paul

Compaq CQ61 won't boot, 2 led blinks.

Product Name and NumberCompaq Presario CQ61-310SA Operating System installed (if applicable)None Error message (if any)LED flashes twice before pausing and repeating. Indicates BIOS corruption. Any changes made to your system before the issue occuredBeen inactive for 10 months due to having no power cable, I purchased a 3rd party power cable for it today. ProblemHello, as I stated above, my laptop has been inactive for 10 months and only today I decided to finally get a charger for it, which set me back £5.99, clearly a low quality charger but I was unsure if the laptop even worked anymore and didn't want to splash out on a manufacturer charger. When the AC adapter is plugged in, the LED indicator next to the charger port lights up, but with the battery installed the charge LED inbetween the Power and HDD LED's flashes 4 times, on the 4th flash it holds for about a second then discontinues the blinks. When powered up the backlight and LCD do not turn on and the CAPS LOCK and NUM LOCK LED's flash twice before pausing and repeating and the WiFi light glows orange. I can hear the HDD and fan spinning but the BIOS isn't initiated. I understand this error code refers to BIOS corruption and have attempted a hard reset, holding the power for 15 seconds as stated on some websites, then 30 as stated on others, and finally 60 seconds, as well as replacing the BIOS battery, HDD and memory modules to no avail... It doesn't seem as if the battery is charging at all, but it is completely empty so I'll leave it for a while to see if it does charge. Is this anything to do with the fact I bought a cheap chinese charger? Or would I have to replace the motherboard? AC AdapterName: WeiXin Da Electronics AC Adapter - PA-1700-02Input: 100-240v ~ 1.8AOuput: 18.5V ~ 3.5A Many thanks, Jordan.

This is a phenomenon of these computers.
If you have a computer that won't boot, remove battery, unplug charger. Press powerbutton for at least 20 seconds, insert the power cable, and hold for another 20 seconds. Nothing will seem to happen. Then press power again.
Your LiION battery is close to end of life. Replace. Or get used to doing this. Diag software will warn for failed battery. You will also have a ton of BIOS messages about an obscure error occuring. But you need to have a working Diag partition to make some sense of the meaningless error reported in BIOS.
This has nothing to do with the RTC/NVRAM backup. But it's no reason to not replace it. It costs about 3$ and you can find a 2032 Lithium cell almost everywhere. (3V, 20mm diameter, 3,2mm thick). Located under the harddrive bay cover on the bottom of computer.
If no boot occurs, check that the "lid closed" switch is working. In some environments they can get stucked in "Lid closed" position.
Also if you have access to a can of compressed air (duster), clean the airflow / cooling part from accumulated dust.
These are not exactly the most energy saving computers. They get hot. I have seen examples of plastic chassie parts melting.

HP Compaq dc7700 won't boot up. Beeps continuously and is stuck at the Windows loading screen.

My computer is a HP Compaq dc7700 Convertible Minitower desktop computer. The operating system is a Windows 7 32-bit.
When I try to boot up my desktop it just has the continuous beeping noise, there's no real pattern or red light. About 5 days ago I got a blue screen, but ignored it since when I rebooted it the pc worked fine. The only big change I've amde recently is installing World of Warcraft on the computer, other than that I don't remember making any big changes to the computer at all.

Hello @ Jjradb
Welcome to the HP support boards. Lets see if we can help you out with your boot issue.
If you could please post back with your complete system information. What I will need is your complete model number and product number, along with that your notebooks Operating System.
Here is a link you can use that will help you find your model and product number for your hp notebook.
How Do I Find My Model Number or Product Number?
One thing you can try until you post me that information is. This resolution was provided by @DavidPK on the following link.
My Hp Laptop freezes at the startup screen.. Help!
Thank you
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Compaq Presario won't boot up

I took out the new hard drive from my daughters PC to try in one of our other models Compaq Presario's but it didn't fit so reinstalled it in my daughters PC. When I switched on it gave a message - "A problem has been detected and Windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:"
It then gives instructions to check the hard drive and run Chkdsk /F but I can't boot up so can't do that.
I can't imagine what is wrong as I only removed the drive and then replaced it. I didn't drop or bang it.
Please help.
Regards,
Norman Silva.

Hi
Please find the link given below might help you to resolve your issue.
How to Troubleshoot Problems When a Computer Does Not Start Up or Boot Properly
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Compaq nx7400 won't boot

I have a Compaq nx7400 EY305ET notebook with WIn XP Pro and a recovery partition. Last time I rebooted it wouldn't. It reboots after 5 seconds in an endless loop and when I press F11 (Start recovery) it shows the bar at the bottom initializing the recovery and the logo with an XP-similar animated "loading" bar. 2 seconds later I get a blue screen:
"STOP: c000021a {Fatal System Error} The Windows Logon Process System process terminated unexpectedly with a status of 0x00000080 (0x00000000 0x00000000). The system has been shut down"
And this happens EVERY time. I've tried the WIn+B+power to restore the BIOSg the and I've downloaded the "HP UEFI BIOS Update SoftPAQ" and installed it on an empty, FAT32 formatted USB drive as HP suggest on their support website, but with no different result what so ever.
I even renamed the USB drive "HP_TOOLS" and tried again and then I renamed the installed folder containing the update to "HP_TOOLS", just in case, but nothing works. The screen remains black and empty.
And this is as far as I get. Suggestions anyone...?
I can also be reached at egw[at]live.se
I REALLY need to get this running. I have 2 days of important work I need to access. (And yes, I forgot to backup the last 2 days. My mistake)

Hi:
See if making this free bootable rescue CD will allow you to explore the hard drive and copy any files you need to a portable hard drive.
Download an instructions below. Use the graphic interface to explore the hard drive.
http://support.kaspersky.com/viruses/rescuedisk
Once you get the files off, order a set of recovery disks from HP by calling the number listed for business PC's/notebooks at the link below (0771-30 30 00)
http://www8.hp.com/se/sv/contact-hp/phone-assist.html
You may also want to run the hard drive diagnostics test in the BIOS and see what it reports.

AP350 won't boot after IOS upgrade

I have an AP350 and after I upgraded the IOS to 12.2.15-JA it won't boot. In monitor mode it tells me there are no bootable images available. I see the new image there. I was having issues with the authentication on this box. This was the reason to upgrade the box to begin with. Now I have more problems here. If anyone can help please I could use it. The old directory where 12.2.13-JA1 was in is not there and the new image is not in a directory either if that helps.

Please read the attachment. It shows you how to recover IOS from bootstrap. Specifically, please go to "Using the MODE button" in "Reloading the Access Point Image"
As a side note, you cannot use HTTP interface to upgrade IOS software starting 12.2(15)JA. Below is from release notes:
TFTP Required to Upgrade 1200 Series Access Points to this Release
Software upgrades fail when you use the web-browser interface to install Cisco IOS Release 12.2(15)JA on 1200 series access points. The image size exceeds the access point's 4-MB restriction for software upgrades. Use TFTP to upgrade your 1200 series access point to this release. For complete instructions on using TFTP to upgrade access point software, see the "Working with Software Images" section on page 20-18 in the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points.

Recovery Disc won't boot

Hello,
I have a HP Compaq nx7400. I've created Recovery Discs but they won't boot from start up screen. When I press F9 and pick optical drive the DVD is spinning from time to time and nothing happens until windows startup.
I've suspected that there might be a problem with my optical drive so I've borrowed an external DVD. The same thing happens when I startup from DVD USB external drive.
I have suspected that there might be somekind of a Recovery DVD problem so I've tested them on a different laptop. The recovery disk have booted without any problem.
I run out of ideas. Any solutions, please?

Try repeatedly pressing F2 immediately after pressing the power button and see if it will at least take you to the laptops BIOS screen (usually blue with a lot of hardware options). If you can do this, you could try going back to the toshiba site on a secondary computer, redownloading the BIOS update accept follow the secondary manual install procedure (usually requires a disc to be burned or put on a USB drive). By not completely loading the BIOS update correctly, you may have corrupted your BIOS firmware which is the essential hard coded software on the motherboard that tells the system how to initially load everything before handing it all off to Windows when windows starts. All that "start up" form the BIOS is what happens with the laptops POSTs or shows you the "Toshiba" screen initially for 3 to 5 seconds as soon as you turn the system on. Let me know if this helps.

Computer Won't Boot Up

Here is my issue, my computer one day was working fine and the next it won't boot properly.
System Specs: Satellite T235D-S1345RD (Laptop) - Windows 7 (64bit) - BIOS 1.7 - 4gb RAM -
I have gotten the computer booted one time. I am unsure why it did that time but did not do it another time.
Since that one time I put the computer in hibernate and when I tried to bring it out it told me it failed when coming out of hibernate so it went to reboot and now won't boot.
Here are the few steps I have done to try and get it working. When it boots up it gives me an error message (says that power failed or for some reason it did not boot)
I have ran "Repair Computer" and it does not do anything. I try start windows normally and it goes no where.
So I then tried F8 and got into the Advanced Boot Menu. First one I tried was Start Windows From Last Known Good Configuration. (or something like that I forget the exact wording)
When it does that the computer will start to boot up go to the "Windows Loading" screen and then it flashes a blue screen (there are words there but it flashes so quickly I cannot read it) and it goes back to the boot screen and acts like it is restarting and continues in that loop.
Next step - Enter F8 again tried "Repair Computer" and it loads to a black screen with a Cursor but nothing ever happens. I have given it over 30 min and nothing happens.
So next step- I enter F8 again and try to boot up in safe mode and again when it loads it flashes a blue screen and then nothing.
EDIT - I found how to show the blue screen. It says UNMOUNTABLE_BOOT_VOLUME. Not sure what else I should do after I get that error message. Message Reads:
It reads UNMOUNTABLE_BOOT_VOLUME and says if it's the first time I've seen the error screen, to restart the computer. Then it tells me if it appears again, to check and make sure any new hardware or software is properly installed.
"If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode."
END EDIT
Next Step: I come to you guys here on this forum. I am a bit perplexed and lost at what to do. I wonder if this is a virus but I cannot get the computer to respond to try to get into it to check.
Ideas? Advice? What should I try? I can get into the F8 menu but not sure what else I should try. I will try anything to get this computer up and running!
Thanks for any and all help.
Lynda

Hi:
The 24 character failure ID usually indicates HDD is failing/has failed. You need to replace it with a new one.
Specs: http://support.hp.com/in-en/product/HP-Pavilion-dv6-Entertainment-Notebook-PC-series/5191856/model/5...
Manual: http://h10032.www1.hp.com/ctg/Manual/c03099531
Check warranty: http://h10025.www1.hp.com/ewfrf/wc/weInput?cc=us&lc=en
Order recovery USB: http://support.hp.com/in-en/product/HP-Pavilion-dv6-6c13cl-Entertainment-Notebook-PC/5191856/model/5...
Contact HP: https://support.hp.com/in-en/contact-hp/product/HP-Pavilion-dv6-6c00-Entertainment-Notebook-PC-serie...
If you're under warranty, HP would send you replacement HDD.
If you're not, buy any branded 2.5" SATA 9.5mm thick internal laptop HDD and replace it yourself. But HDD of at least same capacity HDD as the one that came with your laptop (640gb) so that recovery media would work -
Go through page 56-58 in the Manual for replacement procedure. It's quite simple DIY job.
Something like this:
http://m.newegg.com/Product/index?itemnumber=N82E16822236561
If you've not yet created the Recovery media to restore the factory settings after replacement, you have to order a set of Recovery USB from HP.
For salvaging the data from old HDD, I suggest you take out the drive. Connect it to another PC using SATA to USB adapter - copy all the files you need.
http://www.amazon.com/Anker®-Converter-Adapter-Cable-included/dp/B005B3VO24
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Satellite m300 won't boot! please help!

Hi,
I've got a bit of an issue here.. I have a Satellite m300.. a white one..
and it won't boot... I've had this very issue before but it turned out to be an external USB HDD that stopped it from booting up but now even with everything removed it still won't boot.
And it was fine until yesterday, it just gave up.. I am away from home for work so I have all the work stuff and unfortunately without my recovery cd, but my guess is that it won't even read it..
So this is what happens..
turn on..
all light come on.. including power and all the white lights around the keypad..
and then maybe 5 sedconds later caplock and numlock(?) green lights flash..
then it's a dead still.. no HDD activities or sound.. just dead quite..
the screen remains black blank through out..
it seems to get stuck here before reaching the post screen.
i thought the power button usually took more than just a push to turn off? it instantly swithces off with a single push of the power button..
I think this laptop is like on sleep or something and can't seem to wak up.. maybe?
And it has vista.
Please help.. I have some important work files I need to recover at least before formatting..
and that has to wait till I get home which won't be for a month or so..
which also lets me take it back for warranty as well..
any help appreciated!!!
cheers,
Min

Quote
Originally posted by syar2003
If running a LCD display with DVI connection , try to hook it up with
an analog VGA cable.
Can also be that the motherboard fails to initialize the vga AGP card.
Turn off all power incl. AC .
Disconnect all devices from motherboard : AGP/memory/drives/floppy/USB/PCI cards etc. take out the 20pin & 4pin PSU connectors and reset the motherboards
cmos .
Assemble PSU connectors ,only one DIMM module and graphics card and turn it on and se if you get a post .
Just removed all components. I reset the CMOS. I then reconnected the 20pin and 4pin, 1 stick ram, and the video card (no ide devices, no mouse, keyboard cd drives) and the monitor doesn't show up. I also tried another monitor so it isn't the monitor.
Could it have a bad AGP port?
Any other suggestions? I am thouroughly stumped. Also the power and reset buttons don't work no matter what configuaration I put the front panel connectors in. The Power LED is lit up and it doesn't work and the reset light is off and it doesn't work.
Also noticed one of my fans connected to one of the two other fan pins on the motherboard isn't working.
What a nightmare.

Mid 2010 MacBook Pro won't boot past blue screen

I've been having problems booting up my MacBook. I can't get past the blue screen. It went from booting slow at the grey apple logo screen to not booting up at all. Is it a problem with my hard drive? I also have boot camp running as well, but I can still see the boot camp drive for windows and my OS X drive, as well as my installation disk when I have it inserted when I hold the option key at start up.
I'm still able to run windows on it without any problems when I pick the windows drive. I tried different methods from different forums but I'm just not getting through. I tried holding 'c' to boot up from cd and I let it run over night but it never got past the grey apple screen with the gradient wheel (still spinning). I had already used time machine to back everything up before this happened since I was able to boot up properly (but slowly). Can anyone help? It's driving me nuts, and I can't remember what os/firmware version I'm running.

n your signature you said you are running 10.6.3. So let’s assume you are running Snow Leopard.
It sounds like your diagnosis of disk problems is correct. The OS X partition may be corrupt.
Try booting in Safe Mode.
http://support.apple.com/kb/HT1564
Try again to boot in normal mode.
If it will boot in Safe Mode but not in normal mode then you could have some 3rd-party software preventing the boot or you could have a corrupt disk or OS.
Boot as from the startup manager (Boot - option) and then select the installation disk.
Hopefully that will work better than starting with the Boot-C option.
Then try to repair the system disk.
Start the Disk Utility.
Perform the steps in http://support.apple.com/kb/PH5836.
If it repairs OK but still won’t boot reinstall OS X.
Installing Mac OS X 10.6 SnowLeopard
http://kb.iu.edu/data/akav.html

MacBook Pro Retina 15" mid-2012 won't boot in clamshell mode with an external display attached

I have a 15" MBPr mid-2012 running OS X 10.10.1. The system won't boot in clamshell mode (power is connected, lid shut) with an external display attached via an Apple Thunderbolt->DVI adapter. it boots fine if the lid is open. It isn't the adapter or the display since my 15" MBPr mid-2014 boots up just fine connected to the same adapter and monitor. And this system used to boot like this just fine some while ago (probably before it was upgraded to Yosemite). I've reset the NVRAM (twice) to no avail.
Has anyone encounter this? Anyone have a solution? Should I try an SMC reset (always a bit nervous about that)? Might it be a driver issue in Yosemite?
Thanks.

I have a 15" MBPr mid-2012 running OS X 10.10.1. The system won't boot in clamshell mode (power is connected, lid shut) with an external display attached via an Apple Thunderbolt->DVI adapter. it boots fine if the lid is open. It isn't the adapter or the display since my 15" MBPr mid-2014 boots up just fine connected to the same adapter and monitor. And this system used to boot like this just fine some while ago (probably before it was upgraded to Yosemite). I've reset the NVRAM (twice) to no avail.
Has anyone encounter this? Anyone have a solution? Should I try an SMC reset (always a bit nervous about that)? Might it be a driver issue in Yosemite?
Thanks.

IMac shut down suddenly and won't boot back up

This morning my iMac shut down suddenly. All I had open was Google Chrome and I was just on Facebook and that's it. When I tried to boot it back up, it wouldn't load past the startup sound, wherein it would appear to shut back down,or at the very least the screen would go black (my mouse has lights that stay on when the computer is on, and the light kept going on and off while the screen remained black). This was the case for at least a half hour until it suddenly booted itself back up all on its own. I had it on throughout the day, just browsing the internet and watching Youtube. It shut itself down twice during the day, and both times it restarted on its own right away after showing me a grey screen with the Apple logo and a progress bar. Now it just shut itself down again and it won't make it past the progress bar screen - if it even makes it that far, sometimes it shuts off right after it makes the startup sound. It keeps trying to boot up on its own over and over again, but it keeps shutting down right away. All the fixes I've searched for so far require a computer that actually boots up all the way so I don't think I could run any reports if I tried!
I'm running the latest version of Yosemite (10.10.2?).
Model number A1311
Not entirely sure what specs are useful to know so I'm just gonna write some of what's on the box it came in:
3.2 GHz Intel i3 processor, 4MBshared level 3 cache
4GB of 1333MHz DDR SDRAM
1TB serial ATA hard drive
ATI Radeon HD 5670 graphics processor with 512 MB of GDDR3 memory
Bought it around fall of 2010. Not sure if it's worth trying to get it fixed (I live nowhere near an Apple store) or if I should just get a new computer, but I would like to know what's wrong, if possible.

Try to boot into the Recover Partition by holding down the Command + R keys on startup. If it still won't boot then the HD has probably crashed. The is likely a AASP in your area, you can locate one by clicking AASP Locator, take it to one to be professional diagnosed. If it's only the HD, assuming you have been backing up, restoring to a new HD is pretty simple.

[865PE NEO2 PFISR] Won't boot with added memory

Recently I upgraded a few items on my PC which has been running fine for 18 months or so. I changed out the video card and bought double the memory of the same brand and type it had in it. I went from 1gig (2 sticks) and added two more sticks. But now it won't boot. The power is on but no output whatsoever.
I RMA'd the memory thinking that might be the problem but it's the same with the new set. I tried all sorts of memory/slot combos. Basically, the new memory works fine if you swap it out in bank A with the old stuff. That's how it's running right now, so I know all of the sticks are good. I can take a third and put it in either slot bank B and it'll boot, but obviously not run properly. But any combination of these four sticks and the system won't boot!
Please help!
I'm running this system:
Win XP (SP1 I believe)
865PE NEO2 PFISR
P4/3.0CGHz, 800M 478P/512K HT
DDR Corsair 512MB X4 (400)
Dual 80gb samsung HDs running SATA
Sapphire X800GTO 256M video card
Antec Sonata case
TruePower 380Watt ATX12V

What brand, model, and speed are the RAM sticks. Did you check your Test Report booklet which came with the mobo. If you can't find it, you can go to the MSI website and look for your MOBO and get the test report that way. Some brands/models will that have been tested are shown in the report to be okay in all 4 slots, some only test okay in 2 or 3. Check this report and if it is one of the brands/model/speed tested you will see how it fared. It may well be you the MOBO doesn't like your RAM in 3 or 4 slots.
Maybe I missed it, but did you try each slot with only one stick at a time? You may also have a bad RAM slot.

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Compaq 1200 won't boot

Similar Messages

Maybe you are looking for