Compaq armada m700 forgot power on password

hello,i forgot my power on password(the key we need to enter on power on green box)for my compaq armada m700.Actually i opened it after a long time(2-2 1/2yrs).I enter the correct password but it is not accepting it.please help.
thanks in advance

You might try the business support forums found here.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • Need detailed manual showing how to install a pentium III motherboard on compaq armada m700

    I tried ti install a pentium III on my pentiumII compaq armada m700 It fails to power up. . I need detailed and complet directions with picturesshowing how to do this..additionally getting the screws out and in was near impossibe. Any suggestion there? .I am disabled and have very poor finger and hand dexterity. Thanks for any help. I cannot thow this computer away. Money? I have none.

    http://h10032.www1.hp.com/ctg/Manual/c01120667.pdf  This is the manual
     http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&tool=&query=compaq%20armada%20m...
     I got it from here.

  • Compaq Armada M700 & ATI Rage Mobility

    Hi. It would be greatly appreciated if anyone could help. I installed Solaris 8 on my Compaq Armada M700 notebook and have had endless trouble getting the display drivers to work.
    Does anyone know of any available driver for the ATI RAGE Mobility-P AGP ? I have had to resort to using RedHat Linux which does have drivers for the time being ...

    You can go to www.xig.com ,as far as i knew , solaris doesn't support
    ATI Rage Mobility-P , I have a same problem like yours , but I am using ATI Rage 128 Mobility (M3) , for more information you can go to
    http://soldc.sun.com/support/drivers/hcl/index.html .

  • PCMCIA on Compaq Armada M700

    Hi
    I have installed Solaris 8 x86 on my Compaq Armada M700 laptop. Everything works fine including video which I installed XFree86 for, except that Solaris does not see my PCMCIA controller.
    Does anyone have any sugegstions ?
    Best Regards / Gareth

    Does PCMCIA come with a Solaris driver ? I believe it needs a driver
    which can recognize the pcmcia card when inserted or to talk to it.
    You can look through these sites to find the hardware compatibility
    list for your pcmcia card, and there are other driver related
    information on these sites, which may help.
    http://soldc.sun.com/support/drivers/hcl/index.html http://soldc.sun.com/developer/support/driver/
    http://www.sun.com/software/intel/resources.html http://www.sun.com/software/solaris/ds/ds-intel/ http://www.sun.com/software/intel/
    Thx
    Tushar Patel.

  • FORGOT POWER ON PASSWORD ON COMPAQ CQ58

    I FORGOT MY POWER ON PASSWORD ON MY COMPAQ CQ58CODE ON COMPUTER AFTER TRYING IS 50282400 PLEASE HELPTHANKS

    Hi,          Use the below code to reset 45180426 Or generate one from the below link http://bios-pw.org/

  • Forgot power on password for HP HSTNN-105C

    I forgot my power on password for HP HSTNN-105C 

    Hi CherylG,
    Yes, I could not find an HP laptop using the supplied user posted sytem ID. I don't work for HP and I try to help posters as best as I can. Info supplied by posters must be evaluated for relevance and my responses are provided based on indices of potential validity. In this case two instances of the same problem indicated potential linkage even though I could not identify the HP system involved.
    If the system is a laptop, the problem both individuals are having it is not so easy to correct. If you use a Power on Password you really should copy (backup) and store the password for future use.
    Thanks for your input!!
    Hey, we both used an HP 560z and we liked it!!
    Happy computing!
    Jaco
    ++++++++++++++++++++++++++++++++++++++++++++++++++​+++
    1 -H8 1380t CTO, Intel i7 3820 processor.
    16 GB DDR3, PC3 -12800 Ram. AMI bios(UEFI).
    Pegatron Motherboard- IPIWB-PB (Pittsburg) Beats Audio. AMD Graphics, Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
    2 -Envy Phoenix 810-150se.
    Win 8.1 Pro
    i7 4820k Ivy Bridge, Pittsburg2 Mainboard, 12 GB DDR3, NVIDIA GTX 645- 2GB GDDR5. Win 8 Pro.
    Liquid cooled system.
    3 -HP 560z CTO AMD processor and chipset, AMD 6570 HD graphics, 16 GB DDR3. Win 7 Home Premium upgraded to Win 7 Pro.
    4 - HP ENVY 17t-j000 CTO Quad Edition Notebook. Win 8.0 Pro
    Errare humanum est.

  • Forgot power on password

    I have a HP 2000. I do not remember the Power on password. When I hit enter 3 times I get 'System Disabled'. The code underneath is 58493753. need help, thanks.

    Steps to be followed:1. Use the unlock code posted above to enter the BIOS2. Disable all passwords that are enabled3. If asked for current password - type the unlock code4. For new password, just press ENTER key5. Repeat the same for verify password column.6. Then leave the BIOS by saving & exit option to save the changes. Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84Although I am an HP employee, I am speaking for myself and not for HP

  • Installing S10 on Armade M700

    I am attempting to install Solaris 10 on an old Compaq Armada M700, prior to trying for 'real' on an IBM I am hunting for on eBay.
    It only has 192M of RAM, but running the graphical installer is okay. However, I soon get the following msg:
    /sbin/install-setup: fork failed - too many processes
    Requesting System Maintanance Mode
    (see /lib/svc/share/README for more information.)
    Console login service(s) cannot run
    Directly executing sulogin
    then a # prompt...
    Just wondering if this is a result of the small amount of RAM, or some other problem.
    Thanks,

    Hello pargoo,
    I have also an old M700 with 192MB memory and an 700MHz processor. My problem is, that the notebook boots from the self-made CDs, but it stops when Solaris search the configuration. Maybe you have an hint for me?
    Best regards
    Africanjoe

  • Compaq presario V5000 power on password reset system disabled code06004

    Forgot my power up password n. Can't get past that screen on my presario v5000 compaq laptop. after 3 attempts screen freezes to 'system disabled 06004 .does anyone have a factory reset method that may help me?? This would be highly appreciated!
    This question was solved.
    View Solution.

    Hi,
    Enter:       uvnjddi
                           or
                       srwfjou
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Power on password for compaq 6910p

    How do I find out what the power on password is for a Compaq 6910p
    This question was solved.
    View Solution.

    Hi:
    Here is the service manual for the 6910p.
    http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01566975/c01566975.pdf
    You will find the information you need to clear the power on password in chapter 4, page 38.
    Wait 30 minutes before re-connecting the CMOS battery, not 5. You may even want to leave it unplugged along with the main battery and start the notebook only with the A/C adapter with BOTH batteries disconnected. But at a minimum you must leave the main battery disconnected, and start only with the A/C adapter attached.
    If that procedure does not clear the power on password, your predecessor enabled stringent security in the BIOS, and it will be your chance to get a new notebook for your new position, as the one you currently have will need a new motherboard in order to be of use again.
    Paul

  • Power on Password on Compaq NX6125

    Hi all, I was recently given a HP Compaq NX6125 Notebook after a school clearout and it has a power on password. Of course I did the usual protocol of CMOS battery removal and main system battery removal but this one is staying. My previous mehtods had worked on a much older model but not this one.
    I'm rather stuck which is un-usual for this type of thing but I would really appriciate anybodys help!
    Matthew Phillips

    Matt.
    Before leaving work today I tried to find your model.
    Just did not have the time to find one.
    On Monday I know I can find one we process that model all the time.
    The reason I was looking for one is that some of the BIOS chips are in a cradle.
    Meaning you can pop it out with a small screwdriver and replace it with a new one.
    http://www.ebay.com/itm/BIOS-CHIP-HP-Compaq-NX6125-/260947800881?pt=US_Motherboard_Components&hash=i...
    Then there are the ones that are soldered to the motherboard.
    Takes some skill to unsolder and resolder the chip.
    Let you know what I find on Monday.
    Regards,
    REO
    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Forgot administra​tor/power on password

    Forgot administrator/power on password.my disconnect code is 88016079

    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • Forgot my Power On Password A31

    I've Forgot my Power On Password IBM Thinkpad A31, This Is Not My MIstake I Think Somebody Give IT, or Otherwise Automaticaly It Gives Any Password. Please Help ME

    You will either need to remember the password, or find it out from the person who set it.
    Please note; Lenovo Community Participation Rules 
    No solicitation for, nor exchange of information that will aid or enable unethical, illegal or immoral activities.
    For example, no posts concerning exchange of passwords, credit or banking information, warranty entitlement information for purpose of re-entitling out of warranty products. No posts shall include instructions or directions intended to subvert security measures, including passwords, locking mechanisms, fingerprint scans, etc, nor shall any posts provide descriptions to the location of, nor direct links to content related to these topics.
    Thread Locked
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Compaq hp 15-h002SF POWER ON OR ADMINISTRATOR PASSWORD DISPLAY CODE: 59937925

    compaq hp 15-h002SF POWER ON OR ADMINISTRATOR PASSWORD DISPLAY CODE: 59937925

    Hi: Please read this post which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Sy​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​stems-and-S​... Then... You can: 1. Use the unlock code you generated to enter the BIOS
    2. Disable all passwords that are enabled in the BIOS's security menu.
    3. If asked for current password - type the unlock code
    4. For new password, just press ENTER key
    5. Repeat the same for verify password column.

  • Lost password power on password for Compaq Presario CQ56-219wm

    Lost administrative password system power pasword.  I need to reset rom/bios password, or delete/reset CMOS pasowrd. Please someone help me from losing my mind behind this; I will be most appreciative. thank You,RikcieAlan , Lompoc Calif.

     If this is a power on password, at the password screen, hit enter 3 times and you should receive a 'halt code' - enter this code on the site below. http://bios-pw.org/ Regards, DP-K

Maybe you are looking for

  • CDHDR / Change numbers (add new TCODE tracking)

    Hello SAP users, I want to track creations of equipements in CDHDR. => Obectclas = 'EQUI' and TCODE = 'IE01' OR 'IE08'. Currently, I'm able to track modification (tcode = 'IE02') but I can't manage to add handler on creation transaction. I'm sure it

  • Copying user specific layout of standard report to some user ids.

    Hi , I am using user specific layout of standard report in my customizing report for retrieving data from standard report. i want to copy this user specific layout of standard report to some end user user ids. if any body successfully solved this iss

  • New to SAP - simple question for yall

    Yall I have been doing BI for over a decade and started to learn a bit about BW with a friend of mine that works with BW as a consultant. Now the issues I care to find out are many, but to summarize: 1) Can a person without project experice gets cert

  • PI to Sharepoint

    Hi All, Do anybody have any idea how we can connect Microsoft's Sharepoint with PI. I have found a few links for connectivity between EP and Sharepoint but, not about PI and sharepoint. Regards, Sachin Dhingra

  • Extract / Export Data from my IBM Cognos Applix TM1 to BW7 Oracle based

    Hi, I need to extract data from my IBM Cognos Applix TM1 to my Oracle based BW7. Anyone has done this ? How to get Data out of the Applix TM1 ? Are BW7 Adaptors for TM1 availiable ? What about OLE DB ? Anyobody tried this yet ? Thanks Martin