Compaq c700 sp2 xp driver

compaq presi. c700 xp sp2 sound driveer

Hi:
Please see the link below. Look under the Moderate Models section, and read how to install the audio driver for XP.
First you need to install the MS UAA driver. Links are provided.
Then follow the instructions Under the Audio section regarding installing the modified driver by Silver.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-e-g-Windows-8-and-Software/General-XP-Downgr...

Similar Messages

Please help me to find.. compaq presario f762au sound driver for window 7 32 bit.

please help me to find.. compaq presario f762au sound driver for window 7 32 bit..
This question was solved.
View Solution.

Hi,
It does not make any sense. Based on its support page, it uses "Conexant HD-Audio SmartAudio 221 Driver" for Vista
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3689...
and now it can't see for Windows 7:
   https://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-75899-1
Please try the following methods:
   http://windows.microsoft.com/en-US/windows/help/no-sound-in-Windows
   http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Compaq C700 Notebook Earphone jack pinout

I need the Pinout of the Earphone or Mic Jack (they're interchangeable) for an HP G7000 or Compaq C700 Notebook.
I'm repairing a C700 series (C714NR) that is suffering with punk rock damage. The Earphone jack is thoroughly gutted and it's shell shattered. Can anyone give me a part number or the Pin-Out of the earphone or mic jack (interchangeable) that was used in the Compaq C700 / HP G7000 series? Any help would be GREATLY appreciated. Thank You.

Compaq C700 cooling fan's part number?

Hi
I wonder if the cooling fan 438528-001 can be used on Compaq C700?
It does not show Compaq C700 is compatible with it on hp.com
But when I searched on ebay, many compaq c7800 cooling fans for sale have part number 438528-001:
http://shop.ebay.com/?_from=R40&_trksid=p3907.m570.l1313&_nkw=compaq+c700+fan&_sacat=See-All-Categor...
FYI on C700's service manual, the part number is 454944-001.
Could anyone pls clarify?
Thanks.

I had one of these units. It was a great machine but it was LOUD. The reason behind this was that the fans basically had one speed... FAST AND LOUD.
The latter units had variable speed fans and were a little more quieter.
It bothered me so much that I rigged the unit so the fans would only run at half the speed. It was useless though as the machine got pretty hot. Maybe if it was in an a/c data center it would be different.

Compaq C700. I have changed fan, but now I have no caps lock led did I forget to connect a cable?

I know i have an old but may I say very faithful Laptop compaq C700. Fullversion C742EM
I have changed fan, cleaned it out the but now I have no caps lock led on keyboard, before i strip it down again.
Did I forget to connect a cable?
Hope some one can answer
Thanks
Nick

There is no known malware capable of infecting an iPhone that hasn't been jailbroken (ie, hacked to allow apps from outside the App Store).
If you have jailbroken the phone, and jailbroke the last phone as well, that is certainly the cause of the problem. Restore the phone to factory condition, without restoring any backups, to remove the jailbreak, and any potential malware you might have become infected with.
If you have not jailbroken the phone, it's not malware, it's probably a hardware issue. If you have had the same problem on two different phones that were not jailbroken, you need to evaluate what environmental factors might be at play causing damage to your phones. It could be anything from a bad USB port/charger that you're connecting it to, an overly-humid environment, a tendency to drop phones or any number of other things.

Compaq presario C700 CD/DVD drive problem

Hi all my product no is "compaq presario c700". While starting my laptop the CD/DVD drive makes dragging sound (two times). It doesn't read any disk drives. So my question is, is there any solution to solve this problem? Until i need to replace my drive? Please help me

Hi,
Please try this solution first:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Compaq C700 Series, Drive Stuck in Caddy/Cage, Screws Won't Budge - How Can I Remove It?

Starting my own message because there were no responses when I appended my question to someone else's thread.
I would like to swap out the original hard drive for a larger-capacity one. I had no problem opening the compartment and removing the caddy with the drive. I checked the new drive and it will connect perfectly if I can get it into the caddy.
My problem is removing two of the four screws that are holding the old hard drive in the caddy. I was able to remove two with no problem, but the other two are fastened so tightly that they won't budge.
Does anyone have any suggestions or advice for how to pry this drive out of the caddy so I can put the new one in it? I'm at a loss how to proceed without possibly damaging the caddy. Many, many thanks for any help.
Here is a picture that describes my problem:

Thanks, I appreciate the suggestion. I will try it, and post the results.
I hesitated to change the screwdriver that worked on the first two screws, because I'm afraid of stripping the screws and I didn't know whether a larger screwdriver was a good idea. I think it's a good idea, though, so I'll try it, as carefully as possible. Anyway, at this point, the choice is either do something a little drastic or buy a new caddy (or give up and settle for keeping the old drive), so I may as well go for broke .

Can I swap my HDD from compaq 621 to compaq C700 (FF411PA#ACJ)

I have a two laptops of same company compaq but different models both shows a problem. One problem is HDD and another problem is motherboard sothat I decided to that I changed the HDD. (1) Compaq 621 - Support for 9.5-mm, Serial ATA, 160-GB, 5400-rpm and (2) Comapq C700 (FF411PA#ACJ) - Support for 9.5-mm, Serial ATA, 320-GB, 7200-rpm. Am I changed or not because difference of 5400rpm and 7200 rpm ?

Maybe a tiny bit more heat but the laptop will have no problem handling it. If heat concerns you get a solid state drive. They have no moving parts so generate almost no extra heat. Seriously, today's 7200 rpm drives produce less heat than 5400s from a few years back. If you get one with a large cache of 32 megs it can actually produce less heat than a 5400 rpm with an 8 meg cache because the drive will be accessed a bit less.

Need help!! Compaq V3500 No audio driver available in website

Need Help Compaq V3510TU P/N GG201PA#AKL Windows XP Professional 32 bit, After I re installed the new OS..
The windows doesn't have the audio driver. I tried everything download many of Conexant HD many many version...
they don't work at all.
Please tell me what you should do next
P.S. Last year I came to hp website, it provided many driver in windows xp but now nothing... where 'd they gone???
I tried these, but didn't work
sp36509
sp35682
and many many of them
This question was solved.
View Solution.

Hi:
Please read the XP downgrade guide at the link below:
http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
The instructions for installing the audio for your model can be found under the section labeled 1. Easy Models
More than likely you didn't install the required MS UAA driver before installing your audio driver.
You will need to uninstall any audio drivers you tried before installing the MS UAA driver.
Paul

HOW TO upload linux drivers to OES SP2 linux driver store

Hi everyone,
I couldn't get iprntcmd to upload a linux driver to OES SP2 driver
store. Tried everything. Drove me crazy.
The solution I finally came up with is multi-step but it works. Do
this as root.
First:
You can't upload the drivers in compressed form (.gz extension) so to
expand them all you run
for filename in /usr/share/cups/model/*.gz; do gunzip
/usr/share/cups/model/ "$filename";done
This expands all the zipped files in the driver directory.
Second:
Run the following to upload the drivers to the driver store:
for filename in /usr/share/cups/model/*.ppd; do iprntman driver linux
-upload -username admin -P novell -from-ppd
/usr/share/cups/model/"$filename";done
Obviously, you need to substitute your own username and password (-P
parameter). If you don't add the username and password, you'll be
prompted for them for each driver uploaded.
It's not pretty, but it'll get you there.
Regards,
Don

Don,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Windows XP SP2 - Camera driver will not load

Have the same problem on two different machines. iTunes sees the phone and all the things in it sync as expected, Contacts, Calendar, Pictures, Music, etc.
The first time I connected the phone after taking a picture, I get the pop up showing that Windows sees the Digital Still Camera. Shortly after that I get the "Windows encountered a problem" message stating that my new device might not work properly. The phone is connected directly to the PC's USB 2.0 port using the cable that came with the phone.
Device manager shows the Digital Still Camera with the yellow exclamation mark on the icon. The device status reports...
"Windows cannot load the device driver for this hardware
because a previous instance of the device driver is still in memory. (Code 38)"
I removed iTunes 7.3.1 and reinstalled it. I removed the camera driver, rebooted, and let Windows re-recognize the camera. Same problem, both machines, both XP Pro SP2.
Any ideas?
Windows XP Pro

Resolved. No wonder I'm the only one that encountered this.
I use a Visioneer Strobe Pro USB sheet fed scanner.
http://support.visioneer.com/products/mobile/EOL/StrobePro/
In Device Manager under Imaging Devices, it was showing Digital Still Camera (with the yellow exclamation mark) and Visioneer StrobePro USB Scanner.
On a whim, I decided to unplug the scanner. Then I closed the scanner driver via its icon in the system tray. Within a few seconds, Device Manager updated itself, Digital Still Camera had changed to Apple iPhone. Right away I got the 'Camera connected' dialog asking how I wanted to retrieve the photos from my device. It also shows up in My Computer under Scanners and Cameras. Problem solved.
Next I plugged my scanner back in and now it's got the yellow exclamation mark indicating a problem with the driver. No big surprise.
Once I disconnect the phone and plug the scanner back in, Device Manager updates again and the scanner driver shows back up without the yellow icon. Lastly I reload the scanner driver.
I'm not sure why these two conflict. Don't know if Windows forbids more than one imaging device to be connected at a time or what. Maybe the scanner driver is so old that it doesn't behave properly...it's certainly not certified on XP.

Compaq presario c795tu sound driver needed...plz help me...

Plz help me ...... i need conexant HD smart audio 221 sound driver.....
Actually i reinstalled the XP and came to know that the sound is not coming...
when i checked it...sound driver was missing some files likes AUDSYS.exe and UIU32A.exe etc.
By mistake, my friend had been uninstalled the sound driver. then the problem has been increased...
2 days back...i went to local compaq shop...they installed some sound driver which is working but at the same time
head phone and speaker both are working continuously...means if u want to listen through head phone... speaker also working with head phone....
sound is coming through both devices.....
Plz help me regarding this....and provide me presario c795tu audio driver.....
This question was solved.
View Solution.

Hi,
Here are the drivers.
Unzip to a folder...use Device Manager.
From Device Manager,right click "Audio Device on High Def Bus",choose Update driver,
No to connect,
Install from a list or specific location,
Select Don't Search, I will choose the driver to install,
For the Hardware Type select 'Show All Devices'
Remove the check from "Show Compatible Hardware" and click on "Have Disk".
Next...browse to the unzipped folder and choose the "WiSVHe5.inf".
Ignore XP when it complains.
Reboot.Hi,
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Compaq nw8240 external monitor driver for window 7

I upgraded from XP to Windows 7 and I can no longer use my extenal monitor. Does anyone know what driver I should download for my Compaq NW8240. Thanks for your help in advance
This question was solved.
View Solution.

Hi:
You need to manually install the Vista graphics driver as follows...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=462858&spf...
Download and run the above driver. You will probably get an unsupported operating system error.
Close out of any error windows. Go to the device manager. Click to expand the Display Adapters category.
Click on the Standard VGA Adapter. Click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software method, and browse to the driver folder that was created when you ran the file.
The folder will be located in C:\SWSetup\sp34716.
Make sure the Include Subfolders box is checked, and the driver should install.
After you reboot hopefully, the graphics should be working just fine.

Unistalling windows xp sp2 bluetooth driver

i have a msi btoes, how to uninstall btoes windows xp sp2 driver??? it really giving me a hard time to sync and transfer data, i want to uninstall it completely and just install only sp1 bluetooth driver. when i uninstall it under device manager and it just keep installing the sp2 driver when i plug the btoes driver. how to completely remove it??? anyone??? help???

Try to locate the oemXX.inf file in Windows\inf folder. XX could bee any number, in my case it is 37.
You should see following on the first lines of text in the file.
[Version]
Signature="$WINDOWS NT$"
Class=Bluetooth
ClassGuid={e0cbf06c-cd8b-4647-bb8a-263b43f0f974}
DriverVer=10/17/2002, 5.1.2535.0
CatalogFile=BTDongle.CAT
Provider=%WHQL%
Remove this inf file and the related pnf file file from the inf folder.

Ram ugrade for compaq c700 ku150ea

i have presario c700 ku150ea laptop,i had 4 gb ram 2x2,there are 2 slots in laptop, when i put it, they doesnt work.... please help me

Hi,
Based on the following link, it can only handle 2Gb (1 + 1) max.
http://www.crucial.com/upgrade/HP+-+Compaq-memory/Presario+C700+Series/Presario+C700+CTO-upgrades.ht...
and here is your machine from HP:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=125&prodSeriesId=...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Compaq c700 sp2 xp driver

Similar Messages

Maybe you are looking for