Compaq CQ58- 207 Password Bios

Compaq CQ58- 207 Password Bios
Hello
My BIOS is 99550202 error
Asking for BIOS password
Thank you

Hi,
Please try:
26438824
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Compaq CQ58-252SA Corrupted Bios

Hi all,
Thank you in advance lookig at my post.
Issue : corrupted bios with flashing caps lock.
tried : Downloaded 01858.fd and 01859.fd bios files from HP site, and put it on USB stick formatted FAT16. Hold Window and B while powering up, and it should get the bios files from usb.
This laptop does not have any recovery partition on it.
Please suggest what else can be done.
Thanks.

Hi @Neofuzon ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Compaq CQ58-252SA Notebook and issues with a BIOS Update. You could restore the BIOS with this document selecting the reloading the BIOS default settings which could resolve the issue.
Did you create a startup disk on this Notebook?
I hope this helps.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

BIOS Password Compaq CQ58

I forgot the BIOS Passwort of my HP Compaq CQ58.
When I hit Enter 3 times the code 64628836 shows up.
How can i reset this Password?
This question was solved.
View Solution.

Hi,
Enter: 71780218
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Locked Bios on Compaq cq58

I have Compaq CQ58 with a locked bios password which gives an error code of 65222916 when enter is pressed 3 times does anyone know the code to get into the bios to reset please.
This question was solved.
View Solution.

Hi,
You're welcome
All the best,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Questions on replacing hard drive in Compaq CQ58 for the experts

I have a Compaq CQ58-bf9WM, product number: C2M29UA#ABA with Window 8 version 6.2.9200 build 9200. Windows 8 is not meeting my needs and I wish to replace it. My plan is to replace the existing hard disk with a new solid state disk. I need to prepare the new disk for using the UEFI start up process and configure the UEFI BIOS to boot from the new disk. I also plan to place the hard disk with Windows 8 into a USB hard disk adapter. This will allow me to use Windows 8 when I need it by using the UEFI Boot Device menu in the UEFI Start Up Tool(or screen).
The replacement solid state disk in order to use the UEFI start up process needs to be set with GUID Partition Table (GPT). What Windows 8 tools (e.g. old fdisk Care available to do this and where one can one find instructions for the process? If the tools are missing on this installation of Windows 8 then how can I get the necessary tools?
According to the HP document, HP Business Notebook Computer EFI Guidelines, the replacement solid state disk there needs to be VFAT32 EFI System Partition (ESP) labeled HP_TOOLS and marked as boot present to support UEFI start up process. Presently, the existing hard drive VFAT32 ESP does not have any label? Do I need the HP_TOOLS label on the new solid state drive?
On the VFAT32 ESP, there needs to be a directory structure of /BOOT/EFI/ with the EFI programs(boot loader, boot manager, shell, etc.). How can one register the new EFI programs (within/BOOT/EFI) to allow them to be started by UEFI Boot from File menu of the UEFI Start Up Tool?
The VFAT32 ESP on the existing hard drive has a directory HP in /EFI. The HP directory contains directories BIOS, BIOSUPDATE, and SystemDiags. I am assuming I will need copy this directory structure and their contents to the new solid state drive VFAT32 partition. Is this correct?
There are also two directories, boot and EFI in the HP directory on the VFAT32. The boot and EFI directories appear to contain Microsoft boot software for Windows 8. I should not need these since Windows 8 will not be on the solid state disk. Is this correct?
Before I make any changes that affect the BIOS, I would like to make a backup copy of the BIOS and its information. How can I do this? I would also like the backup copy to be stored in the ESP BIOSUPDATE directory.
I would like to have the UEFI Shell available on both drives(existing and new). UEFI Shell is part of the overall UEFI specification, so it should be able to be supported by the UEFI BIOS. It needs to have a signature or key file to register it. Does HP have a version of the UEFI shell with a signature file available? If yes, then how does one get a copy of files and installation instructions? If no, then how does one install the Intel provided shellx86.efi program (especially the existing drive)?
Thank you in advance for any help on any these questions.

The prices there look pretty decent. As for transferring the cloned image, what software did you use to clone? Most imaging software has a way to restore the image to a new hdd.
I use Macrium. It creates an Image of the hdd to CD/DVD or external USB hdd. It also lets you create a bootable cd to boot from & restore the image to a new hdd.
Macrium Reflect HERE
Create an Image Restore an Image
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Compaq CQ58-201SU

Hello,
I have a compaq CQ58-201SU.
What happened :
I was trying to reinstall windows. Current vesion was Win8.
New Windows disk is 8.1 Pro.
It gave me an error saying the following :
"Windows cannot be installed to this disk. the selected disk has an MBR partition table. On EFI system, Windows can only be installed to GPT disks"
I was just about to download Gparted onto a usb drive to fix the partition type.
Tried once more just to make sure it wasn't a mistake.
Laptop willl not boot or not even let me enter BIOS.
Black screen and caps lock blinkig twice between pauses. - (According to HP FAQ thead it's an indication for corrupted BIOS).
Tried Hard Power Reset. (Remove battery, hold down power button for 15s, put battery back on, put AC power on) - Didn't work.
Tried BIOS reset. (First Press WinKey+B then press Power Button for one second, while still holding the other keys, then release them together) - tried that several times, nothing happens.
Does anyone have any idea what I should do next?
This question was solved.
View Solution.

Hello Arucad,
Welcome to the HP Forums! I hope you enjoy your experience!
I understand your computer will not start. I will do my best to assist you with this issue! To troubleshoot, please try the steps in this HP document: Computer Does not Start
This document contains steps such as resetting the notebook and more, corresponding to the exact symptoms. I believe this document will resolve the issue. If not, I would contact HP phone support for hardware assistance. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns. Thanks for bringing this issue to the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Compaq CQ58 refuse to boot/start

My computer refuse to start, switch it on and goes into preparing auto repair and then automatically switch off. What is wrong and what are the solutions.

Hi Milaz,
Welcome to the HP Support Forums!
I am so sorry to hear that your Compaq CQ58 Notebook PC will not boot up for you. I will try my best to help you with this. To better guide you, could you please tell me the full model number or product number of your Notebook and the operating system that is running on it. Here are some guides for How Do I Find My Model Number or Product Number? and Which Windows operating system am I running?
In the meantime, here is a document for Computer Does Not Start (Windows 8) that should help with this issue.
I hope this helps, please let me know.
Thank you and have a great day!
I worked on behalf of HP.

Reset password Bios HP Mini 1000 CNU92652N6

Hepl - Password Reset password Bios HP Mini 1000 - code CNU92652N6 model #:1151NR Thank

As you've posted this issue several times, if the replies you're getting are not working, you need to explain what is not working on the same thread, rather than creating additional ones. From the halt code you've posted: Enter: e9lo7gq79g If the above code isn't working, check the following. 1. The halt code ( generated after 3 incorrect entries ) that you've posted is correct. 2. You entering the code on a QWERTY keyboard. 3. Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Plug in the AC Adapter ( leave the battery out for the moment ), start the notebook and try entering the code again. 4. Try entering the code via an external usb QWERTY keyboard. Regards, DP-K

"Line in" trouble COMPAQ CQ58-241SA

Hi,
Ive recently being trying to record guitar demos on my laptop using audacity. I first installed guitar rig 2 and the usb dongle that came with it along with its (latest) drivers. When using guitar rig 2 i am able to hear sound once i have set the correct sound input in preferences but when trying to record in audacity (also tried reaper) it will not pick up a signal from the usb and says "Error while opening sound device. Please check the input device settings and project sample rate".
When i go into the soundtab via control panel it registers that the behringer usb device is plugged in but will not register any sound in the bar next to it. Ive tried everything now from re-installing drivers to downloading ASIO4ALL and have absolutly no idea what it could be due to minimal knowledge of soundcards etc.
Running on:
COMPAQ CQ58-241SA
Windows 8

Hi,
Based on its specs, it ONLY has:
External Ports
Digital media card reader
1 VGA
1 HDMI
1 Headphone-out
1 Microphone-in
3 USB 2.0
1 RJ45
No line in at all therefore the error mus be on the USB dongle. The following forum may help:
http://forum.audacityteam.org/viewtopic.php?f=27&t=29307
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

No audio on Videos on Compaq CQ58

Good morning,
I have purchased a Compaq CQ58 notebook and the audio does not always work.
The very first time i encountered this issue i was watching a video through the internet and everything was fine. I then went to another site to watch something else and there was no audio whatsoever
I then went back to the site i was on originally, and watched the same video i had watched some 5 minutes earlier, and again there was no sound.
I came here to the forums to seek help and when i played the video that guides you to finding your product key the sound worked immediately and continued to work for the rest of the day.
I've used sites since then and had no audio issues.
I turn my notebook on today and try to watch videos and again there is no sound.
I have run the troubleshooting guide and it says there is nothing wrong with my devices. I have gone into control panel and there are no yellow icons suggesting there is an issue.
Can someone please advise why my notebook is picking and choosing when it wants to play audio through my speakers please?
The model is Compaq CQ58-331SA

Hello Zur-En-Walsh.
Have you tried reinstalling the driver? Here is a link to the latest version.
Let me know the result.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Drivers Compaq CQ58-245SW

Hi all.
I bought new notebook Compaq CQ58-245SW and windows 7. i was very happy till I can't connect to network.
I dont have drivers and i can't find them. i got only driver for windows 8 but it doesn't work. Pls help me !

Hi:
Below are the links to the drivers you need:
Chipset. Install first and reboot. The first download listed is what you want.
http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx#2
Wired network: Accept the agreement, download and install the 6th one on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
Wireless network:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Card reader:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Paul

Password BIOS deleting on my S4100XCDT

I m just buying an old Toshiba Satellite 4100 XCDT to use a IR webcam, the problem is there is a password bios and I cant delete it, I tried to use the loop back system but without success.
How can I do?

This is what you need:
1. Your notebook
2. An empty formatted diskette (720 kb or 1,44 mb)
3. A second computer (e.g. a DOS desktop PC)
4. A hex-editor (e.g. Norton DiskEdit or HexWorks)
This is what you have to do:
1. Start the desktop PC and start the hex-editor
2. Put the disk in drive A:
3. Change the first five bytes of sector 2 (boot sector is sector 1) to: 4B 45 59 00 00
4. Save it! Now you have a KEYDISK
5. Remove the disk from drive A:
6. Put the disk in the notebook drive
7. Start the notebook in Boot Mode (push the reset button)
8. Press Enter when asked for Password:
9. You will be asked to Set Password again. Press Y and Enter.
10. You now see the BIOS configuration where you can set a new password.
And that's all!

Compaq cq58

hello i have a compaq cq58 241sa and my audio suddenly stopped working so i went into sound options to see that it said my speakers where unplugged and that some random black box was there but no sound will play so i went to the driver page and downloaded my driver which when i installed it, it gave me the error audio driver -0001 so i went on a search for the realtek drivers and a few would give me the bsod which i sorted out and finally came to a driver that would work so i installed it and all was fine untill i rebooted the unplugged error was back now every time i reboot my computer i have to reinstall the driver, also the mic sauys unplugged
thanks in advanced
ps i dont want to restore my os as i know its only a driver issue

Hello @danny1313 ,
Welcome to the HP Forums!
I understand the audio has stopped working on your notebook.
If the issue is recent the best thing to do would be to restore the notebook to before the issue started. This doesnt remove your files but will remove any recently installed software or Windows update after the chosen restore point: System Restore (Windows 8)
If that doesn't work please try using the HP Recovery Manager to restore the original drivers for the sound card. You can see how to do this here: Using Recovery Manager to Restore Software and Drivers (Windows 8)
If none of that works try installing the following drivers: Realtek High-Definition (HD) Audio Driver
Let me know if any of those work.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

No sound on Compaq CQ58

I have a Compaq CQ58, with Windows 8.1 installed.
Product number: D1L62EA#UUW.
I am having problems with the sound disappearing.
It started a few days ago and after looking at some of the forum suggestions I managed by good luck to get the sound back, though I am not sure exactly what I did to succeed,but it seems that as soon as I turn the PC off then I have no sound again.
The system is telling me that the speakers are working and I can see when I open the Volume mixer that there is sound on the unit.
Best regards
Iakom52

Hi,
Try the following.
Open windows Control Panel, open Windows Update, select 'View update history' in the left hand pane and then select 'Installed updates' link in the following window.
Locate update KB2962407, right click it and select Uninstall. When done, restart the notebook, open windows Control Panel, open Windows Update and select 'Check for updates'. You'll see the update you just uninstalled being offered again - right click and select 'Hide Update'.
After this you may or may not need to delete and reload the Audio driver - if you do, the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Compaq CQ58 blinking caps lock

Hi all,
I have a compaq CQ58 which has just been restored to factory settings and everything seems to be working fine.
However, my caps lock keeps blinking 3 every second and then a break of about 2 maybe 4 seconds.
I can't find reference any details regarding this. All I could find is blinking caps lock and booting issues. This does not apply to me as laptops works as normal.
Not too sure but this might be related. I have removed the screen due to being smashed and laptop carrently runs on external screen while I'm waiting for a new screen.
Could someone advice please.
Thanks a lot.

Hi lokyt,
I see that your Compaq has a blinking Caps Lock light. Unfortunately, this blink code is an indication of a hardware issue. According to this HP document Computer Does Not Turn On and the LEDs Blink three blinks mean that it is a memory failure.
You can try removing and then reseating the memory. Here is the Maintenance and Service Guide for your model on page 36 you will find instructions on how to remove the memory. You will also find replacement part numbers if you need to replace the memory.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Compaq CQ58- 207 Password Bios

Similar Messages

Maybe you are looking for