Compaq cq60 104tu problem with audio drivers

hi.....im..using..compaq..cq60..104tu..it..came..with..windows7..and..recently..i..have..installed..windows8..from..then..i..found..problem..in..audio..drivers..so..i..searched..for..audio..drivers..compatible..for..windows8..on..my..laptop..but..i..can't..so..im..requesting..you..where..can..i..find..audio..drivers..for..laptop..and..how..can..i..retify..my..problem..............sry..for..tat..my..spacebar..is..not..working..since..i..installed..windows8..and..few..other..keys

Hi,
They are still working on this:
http://answers.microsoft.com/en-us/windows/forum/windows_cp-hardware/bug-conexant-high-definition-sm...
Regards.,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

[Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

Ok,let's go...
I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1. i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection. i have 2 screenshots to show you:
this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
the other one is from everest corporate edition:
both drivers marked with purple colour!
i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
thank you very much and i'll stay alert of your suggestions. by

Downgrade to win7 problem with audio drivers. beats audio software for win7?

I recently purchased the HP Envy 700-074 from best buy. it was necessary to downgrade to windows 7 for some work software and I would like proper audio drivers/software for windows 7. Right now it seems to be detecting as Nvidia audio driver but in this case it doesnt allow my front panel audio ports to output audio. I would also like to have beats working.
here are the hardware ID's associated with the card
HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619&REV_1001
HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619
and here's a quick screenshot of the driver that is associating with it right now..
http://gyazo.com/23499c19d5e2a21f81b9124ad822c07d.png
even those VEN_10DE's seem to associate to nvidia, but from HP the driver is meant to be IDT high definition audio? is something going on here?
the only change i've made to the computer is upgraded to an EVGA Nvidia GT 610 video card.,

Hi, Paul.
I have similar problem here.
I bought HP Envy 810-200nr and I hate W8, so I installed Windows Server 2008 R2, which is my favourite.
Then I solved numerous problems with chipset drivers and finally it all works, but Audio (IDT HD Audio) does not work.
Completely silent.
HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3&REV_1001
HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3
It looks okay, when playing audio - indicator blinks and shows level, volume can be adjusted, all parametrers - speakers, etc seems okay but silent!
I tried numerous drivers for W8 and W7 64 but they give "Incompatible version" error.
Can you advise me what to do? I really want WS2008R2 here, but this audio is weird..

Compaq CQ60-615dx Windows 8 Audio Drivers

I need some help getting the Audio Drivers for Windows 8 for my Compaq CQ60-615dx. I have tried using the Windows 7 Drivers, and the Vista Drivers to no avail. Any help or suggestions would be appreciated!

Hi,
They are still working on this:
http://answers.microsoft.com/en-us/windows/forum/windows_cp-hardware/bug-conexant-high-definition-sm...
Regards.,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problems with audio drivers

Hello, I have problem with conexant audio drivers. I have notebook Lenovo 3000 N500 4233-3DG. I installed these audio drivers (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-71000) but it doesnt work. Can somebody help me please? Thanks.

Manually uninstall both drivers in device manager and restart the system. If Windows tries to redetect the devices, abort the procedure.
Install KB888111 to reinstall the Microsoft UAA Bus Driver. You can download it here:
http://www.hydrogenaudio.org/forums/index.php?showtopic=47079
After that restart your system again and install the latest Realtek Drivers from here:
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false

Problems with audio drivers on p35 neo combo

hi,
i recently got a new rig with MSI p35 neo combo mobo.however i am unable to install the audio drivers ,during the driver installation a error message pops up saying the installation failed and the installation stops.i have even tried downloading the audio drivers from the MSI website.please help me.thanks

Manually uninstall both drivers in device manager and restart the system. If Windows tries to redetect the devices, abort the procedure.
Install KB888111 to reinstall the Microsoft UAA Bus Driver. You can download it here:
http://www.hydrogenaudio.org/forums/index.php?showtopic=47079
After that restart your system again and install the latest Realtek Drivers from here:
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false

Problems with Audio Drivers on K8MM-ILSR

Newbie alert.
I think I'm posting this in the right area, but forgive me if I've messed up.
I have this Gateway refurb computer I've just bought, and I've had no luck getting it running with Gateway's bundled software (and neither has Gateway support... what a waste), so I've decided to go it alone (glad I did... it's much faster now).
Anyhow, I have the latest MSI bios loaded, and everything seems to be working ok except for my on board audio. I have made sure the audio is enabled in the BIOS. When I try to load the latest driver from the MSI website, or the Realtek website, I get the message that the "Data is invalid" and that the drivers could not be installed. Ive tried uninstalling and reinstalling them in and out of safe mode. I've also tried copying over the driver.cab file from the XP installation disk (read about this on the MS support site) to no avail. I'm not terribly experienced in building computers apart from adding memory/replacing broken parts, and stuff like that. I searched this site, and Googled all around, but I still can't seem to solve this. Any help would be appreicated.
Thanks in advance,
Eric

Thank you foxxww.
I gave it a little more thought and realized that nothing had changed since my fresh install of XP EXCEPT I flashed my BIOS. Duh! I since re-loaded XP and on-board sound is up and running. Incidentally it also resolved a previous complication I had with my on-board video driver. Now If I could just get the spontaneous re-boot issue figured out... Ah but that's for another post I suppose. Thanks to all that offered suggestions.
-Eric
Quote from: foxxww on 15-December-05, 03:04:17
I had a problem installing the audio driver for my K8MM-V when the mainboard was changed. The problem was solved by re-installing the XP Pro OS.

Compaq CQ60-104TU keyboard not responding

Hi experts,
I have been facing this problem of keys not responding or responding in erratic fashion on my Compaq CQ60-104TU laptop. Because of this I'm not even able to login into my system.
Can somebody please point out to the problem and also the solution.
Thanks & Regards,
Himanshu

as far as i know, if you can type in your password on the log-on screen then the keyboard is working, if the problem would appear after logging in or it will appear when you are on your desktop screen then it may be an operating system problem or a user account corruption issue
the keyboard would only be a hardware failure if when you turn on your nb, there will be no ligts on teh keyboard, capslock key will not lit or no response at all from the moment you turn on the nb
for the touchpad, try to check if its off or on... if there is an orange light above the touchpad then its off, toggle the switch on that light to turn it to blue..
so before anything else.. TRY THIS FIRST!!!!
1. remove the battery
2. disconnect the power adapter
3. with no power supply at all, press and hold the power button for 1 min.. make sure it will be 1 min...
in technical terms we call this HARD RESET.. this process would release static charges that might be contained on the power button bec sometimes those static charges causes harware malfunctionalities..
then it this step will not work.. do this...
try to go to safe mode by continually pressing F8 when booting (press F8 when you see hp invent screen), then you'll be directed to advance boot options... choose last known good config.. then it will boot to last known good settings....
please let me know if this will not work..
if not "choose repair your computer" on the boot selections.. choose keyboard layout as US.. then if asked for a username and password.. you can cahnge the administrator username to your username then put in your password.. if you are not using any password leave it blank.. then choose start-up repair...
please let me know if this will not work..
Hope this helps.....................

Problem with Audio on HP Envy 6-1130sw (C6F62EA)

Hello everyone.
I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
Thanks.

Hi piotrek1130sw,
From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
If neither driver works I will gladly follow up and provide any assistance I can.
Please let me know the outcome.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Problem with Audio MIDI Setup using multiple accounts

I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

Notebook NC6400 HSTNN-C18C problem with grafic drivers

hello i have
NC6400 HSTNN-C18C and i have problem with graphic drivers.i have windows 7 proffesional i found some .but in install has failed installation .i have installed game Farming simulator 15 but i still must install latest graphic drivers.can you send me link where i download drivers thanks for help

Hi,
It's a good machine isn't it. Unfortunately no official support:
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=1848274
Please try:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/compaq-nc6400-drivers-for-windo...
Vista driver on the first link may help.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problem with audio configuration

when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
instructions at: http://docs.info.apple.com/article.html?artnum=93698
Thanks giterdone

E7-00 Problem with MTP drivers winXP service pack ...

I have E7-00 and i have a problem with MTP drivers not being installed and constatly showing device is not working properly in device manager.
I have win XP sp3, installed newest Nokia Ovi suite, and my computer is constatly trying to install MTP device drivers, and keeps complaining it cannot.
What should i do.
Cheers
Aleksandar

NOKIA IS NOT LISTENING TO THIS FAILURE, WHY DO WE HAVE THIS FORUM AT ALL WHEN NOBODY HELPS TO SOLVE THIS BUG

Two problems with audio clips

Hello,
I'm having two problems with audio clips:
1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
What am I doing wrong?
Thanks.

1. Drag the little hand on speaker icon to drag from
the Viewer...
Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
2. It means your sequence settings don't match the
properties of the source audio you're putting in it,
and you either need to change the settings in the
sequence, or render the audio.
Ah, that would explain it. Thanks!

Premiere pro cc 2014 problems with audio

I have edited some sequences in premiere using sony xdcam ex clips. The clips where recorded as 1080 50i. I have edited it in the same sequence properties as premiere sugested it. All there is fine and audio is playing well. The problem strats when i change the sequence properties and select it at 1080 60i or 29p. The audio is distorted and it sounds like robotic, sometimes audio is muted on audio transitions. When i revert the properties back to 50i then all is fine.
Anyone else experience the same problems?

Sometimes i must add some clips that are recorded on canon 6d on 29.97p. and this clips look choppy and jerky on 50i sequence. But on 60i sequence both 50i and 29.97p look good. On premiere cc i cann change sequence properties without any problems with audio, only on cc 2014 that audio problem exist.

Compaq cq60 104tu problem with audio drivers

Similar Messages

Maybe you are looking for