Compaq CQ61 problem with external speaker.

Hi,
I have this problem with playing music from my laptop through an amplifier to some discotheque speakers.
The balance changes so that the left speaker is playing much more than the right, and after a while the sound
turns into almost plain distortion. I have my laptop connected with a common jackstick with a left and right to the amplifier.
I wonder if anyone could find a solution to my problem..
I have had the amplifier checked, and the cable, but there shouldn't be any problems with those.
Jesper

i don't know that i would call it "common," but i have seen a few complaints about it. again though, it hasn't been a complaint i've seen often. i do think it's a cheap speaker. mine is nearly a year old and has not blown.....but i was never impressed with it.

Similar Messages

  • Problem with External Speaker

    So i'm on my fifth phone now. The external speaker keeps blowing. Anyone else go thru this as Verizon and HTC is telling me this is not common?

    i don't know that i would call it "common," but i have seen a few complaints about it. again though, it hasn't been a complaint i've seen often. i do think it's a cheap speaker. mine is nearly a year old and has not blown.....but i was never impressed with it.

  • Has anyone else had problem with their speaker on a macbook pro when on the internet?

    has anyone else had a problem with their speaker while on the internet like youtube on a macbook pro?

    Please make a Genius Appointment and take it in for service. It's under warranty.

  • Problems with external context mapping

    Hi ,
    I am having the following problems with external context mapping from one WD component to another.
    Problem description:
    In the <i>Component Interfaces</i> I have defined a WD interface "InfA".
    In the <i>interface controller</i> of this compoenent,I have ContextA and attributeA(cardinality 1..1).The contextA is marked as an "Input Element".
    Now my webdynpro componentB adds InfA as used component.In componentB I decalre a contextB with attributeB and map it to contextA to set up the external context mapping.
    Now I expect that if any webdynpro component implements this WD interface InfA ,he has access to contextA with the data getting filled from contextB.
    After i have created the component for the used component I try to fill values in the source node contextB thru this code:
    wdContext.currentContextB.setB(value);
    But in the runtime I keep getting error nullPointerException for nodeContextB,suggesting that the mapping has not been completed.
    Can anyone suggest due to what the error can come ,and, if its a webdynpro bug ,is there a workaround??
    Thanks in advance for your help.
    Best regards
    Sourav

    HI,
    Valery : I personally checked  by doing the example, if the names of value attribute are different in the child's interface and parents component controller then it throws the exception.
    Sourav: NullPointer Exception is thrown when something is not properly initialised, if in the main component the cardinality of mapped origin is 1.1 then you need to access it element directly like:
    wdContext.currentParentNodeElement().setFname("Abhijeet");
        wdContext.currentParentNodeElement().setLname("M");
    i will suggest just check out if you are declaring some element of value node and without initialising taking its use or what?
    if this doesnt solve your problem, please post the expanded exception.
    hope it helps
    let me know if you face nay problem
    regards

  • Problem with external punchout in SRM Server 713

    Hello,
    We upgrade from SRM_SERVER 701 SP 04 to SRM_SERVER 713 SP 02, now we have a problem with external catalog, we did not change anything in standard call structure, however now when the user access to external catalog, select a product and "checkout", SRM returns to shopping cart screen without products and no message are register in log in transaction code SLG1.
    Our parameters in structure are:
    10                     https://xxxxxxxxx                          URL
    20 VIEW_ID          NAME                            Fixed value
    30 VIEW_PASSWD     XXXXXX               Fixed value
    40 USER_ID          SY-UNAME                   SAP field
    50 BRANDING      search5                     Fixed value
    60 LANGUAGE      ES                           Fixed value
    70 COUNTRY      MX                             Fixed value
    75 EASYORDER 1                          Fixed value
    80 target _top                                  Fixed value
    85 ~caller      CTLG                              Fixed value
    90 OCI_VERSION     4.0                     Fixed value
    91 FILTER                                      Fixed value
    92 OPI_VERSION 1.0                     Fixed value
    100 HOOK_URL                             return URL
    110 returntarget      _top                       Fixed value
    we made some test with parameter BYPASS_INB_HANDLER, set as 'X' but this not solve our issue.
    We have an implementation in badi BBP_CATALOG_TRANSFER to map product category, even if I set an external breakpoint in this implementation, system does not pass through it, also we test with this implementation inactive and behavior is the same, nothing transfer to shopping cart
    Does anyone know what's missing?
    Thanks in advance.
    Best regards,
    José Luis D.

    Hello Jason,
    Thank you for your answer, but as I told, If I set an external breakpoint it does not stop for debugging, so I can't see table as you recomended. This process (debugging) is familiar to me, in last version I can do it.
    Any suggestion?
    Thanks in advance, best regards
    José Luis D

  • I have a problem with external editing preferences where Photoshop will not launch when I choose "Edit In"...

    Hi. I have a problem with external editing preferences. If I add Photoshop as an external editor, it won't launch when selected, if I add it as an additional external editor it will. Why? How can I fix this as I need to use Photoshop and another program as the additional external editor.
    I use a Mac running OS X (10.8.5) and PS CS4 and LR 5.7. Any ideas on a fix? Thanks in advance.

    I don't know why Photoshop won't start. However, it's possible to create external editor presets using the additional external editor tools. There are instructions on how to do this in the Lightroom help. You could assign Photoshop and create one preset, and then assign another program and create another preset.
    I don't know if deleting your preferences would fix the problem or not. It can sometimes fix other problems.
    Preference and other file locations in Lightroom 5

  • Problem with ear speaker

    hello. when i make a call i hear some shshshsh in ear speaker . is that normal too it not very high sound but its still there ..but when i use my headset i didnt hear shshsh sound . its new phone i just bought it yesterday .. is that normal or i go back to store to fix it .. its not very high sound but when i focus i hear shshshshsh in ear speaker 

     the problem at number 2 look at picture when i speak i hear some shshsh..the sim card new and its very good too problem with ear speaker i think i want to know its normal or not becouse when i use headset i didnt hear that shssh sound .. 

  • Curve 9220 problem with loud speaker

    I am having problem with loud speaker since purchase. Volume level fluctuate every time, sometimes not audible also. 
    Complaint given to service centre in Jaipur-India but they are not cooperative. 

    Hi and Welcome to the Community!
    I recommend that you attempt to boot into Safe Mode:
    KB17877 How to start a BlackBerry smartphone in Safe Mode
    It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
    If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
    But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
    amitasmrj wrote:
    Complaint given to service centre in Jaipur-India but they are not cooperative. 
    Unfortunately, if your issue is a hardware problem, then no one here in this forum can help...refer:
    http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I have been having problems with my speaker. After the recent update I am unable to listen to movies or music using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears.

    I have been having problems with my speaker. After the recent update I am unable to listen to movies, music or apps using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears and then disappears after the headset is removed. This is quite annoying. My child's Apps that he likes to play will not even make a sound. HELP!!!

    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
    Note: You will not lose any data.

  • After a successful home button repair, I've got a buzzing sound when I make or receive calls. No problem with the speaker as I can listen to online radio stations and my music.

    After a successful home button repair on my iPhone 4, I've got a buzzing sound when I make or receive calls. No problem with the speaker as I can listen to online radio stations and my music.

    I guess your definition of a "successful repair" is different from most people's.
    If you got it serviced by Apple, take it back to them.
    If you had it serviced by a 3rd party, Apple won't touch it. Take it back to whoeever fixed it for you.

  • Problems with the speaker

    Hello!
    I bought the iphone 5 in Portland Oregon, but I live in Prague, Czech Republic. The phone have a problems with the speaker, it does not work. Where can I obtain warranty service? Should I go to the USA or I can do in Prague?

    First make sure the mute switch is not on, left side, then try restarting your iPhone by holding down the on/off and the home buttons at the same time until your see the Apple logo. 

  • I have a problem with the speaker while using viber, Tango and rebtel

    I have upgraded my iPhone 4 to 5.1.1 and in no time I started having a problem with the speaker. It simply doesn't work at all with Viber, Tango  and Rebtel. It works fine with direct calls but not with calls through these applications. I have contacted Tango and Rebtel in this respect but non could help. Is anyone experiencing such problem. is there a solution. Many thanks for your helo

    Thank you. Have given it a try - it sort of works, although doesn't turn up very loud!

  • Problem with External 2.1 digital speakers

    Anybody have any problems with external digital speakers connected to the SPDIF connection?  I have a 1215-600XT, and I tried connecting my old DELL Boston Acoustic 2.1 speakers.  They worked, but any time a "sound" played, a loud pop would follow the end of the sound track.  If its multiuple sounds (i.e. an application that is making numerous alert sounds) I get multiple pops.  It even happens at the endf of music tracks.  It was so annoying, I stopped using the speakers.  before I invest in another set of speakers, want to know I am not wasting my time.
    Also, anyway of getting the soundcard to support digital 2.1 or other sound?  The set-up screen only shows stereo for external speakers and no way of adding more.
    Sincerely
    Scott

    pmoney,
    If you need a RMA, you will need to contact Customer Support either via email or phone. Also, it may be a fault with the sub and not just the cable alone, anyway contact Customer Support and they will be able to assist further.
    Jason

  • Compaq presario problems with vista

    Hello, I am having major problems with our compaq presario sr5233wn desktop, os windows vista home premium. It started shutting down about ten days ago randomly, then started with a blue screenthat has displayed different messages... I have completed 6 different restore points and this didn't work... I then backed up my personal files and performed a complete system recovery installed on the pc...it worked great for about half an hour then the freaded blue screen popped up and I had to shut it down...i did this three times to no avail...then I did a complete recovery from the two discs I made shortly after purchase...that has not worked either...does anyone out there have a fix for this..I need my ole puter.
    Thanks Elmer

    Hi Elmer,
    Sounds like the first thing you need to do is test for a hardware failure.  Check out Testing for Hardware Problems Using Hardware Diagnostic Tools (Windows Vista) and since it sounds like you are having problems running Windows for very long, skip to the bottom to the section called Using Hardware Diagnostic Tools when Windows does not open.  Run the tests and report back what you find, if anything fails then there is probably a hardware component that needs replaced, possible culprits include the memory or the hard drive based on the symptoms you are describing.  If everything passes, post that back as well, and let us know, and we can look for other causes of your problems.
    Good Luck!
    R
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • Error code 36 (problems with external hard drive)

    I have just upgraded to Yosemite and am now having major problem with my external western digital hard drive.  I cannot create new folders and when I hit command N I get error code 36.  I also cannot move files from one folder to the next.  When I try to move them I get the error message: "The operation cannot be completed because a file of that name already exists" and that simply isn't true.  None of the files' names exist in the other folder.

    Ok, It appears to be the fault of Western Digital.  I ejected the hard drive and then plugged it back in and it said that the drive was broken but I could still read the files and it told me to save the files on another disk and reformat.  So it was just a coincidence that I upgraded to Yosemite at the same time that my external hard drive broke.

Maybe you are looking for