Compaq Mini 110 won't start after cleaning Think Point virus

Hi
I'm helping my daughter with the following problem with her Compaq mini 110.
After removing the Think Point virus according to advice in different places the mini 110 don't boot after power on. The choice of pressing F10 (BIOS setup) and F9 (boot order) appears. If I don't touch any key at startup it starts accessing the hard disk for a few seconds, according to the hard disk LED and hard disk sound. Then it stops the boot procedure. Somewhere on the HP web site I read that pressing F11 repeatedly during boot would give the opportunity to choose operatings system recovery from the recovery partition. It doesn't respond to F11. Setting boot device priority doesn't seem to be a solution, since there is only one choice, so I can't force it into the recovery. I would appreciate any advice how to proceed. Below I add som additional facts.
Some threads on the forum mentions pressing F6 for recovery funktions, but it doesn't respond. There also ought to be some function on F12, but I can't figure out what. Doesn't respond anyway. Any explanation for F6 or F12?
Thanks,
Per
FACTS:
Computer model: Compaq Mini 110c-1100SO
OS is Windows XP as supplied with the computer and was never changed.
Hard disc diagnostics in BIOS setup performed without error reports (160 GB, disc type suggests Seagate hard disc)
RAM diagnostics in BIOS setup performed without error reports (1 GB)
Pressing F9 at startup gives no choices apart from the hard disk, no choice for partitions or USB boot.
I have set the delay for the user to press F10 to 5 seconds.
The display/screen works properly during BIOS setup
Power adaptor connected, and charging LED lights constantly (as I expect it to do)
Power on LED lights constantly
Wireless network LED lights constantly
Caps lock LED flashes briefly at start up, then gets dark.
When booting stops, background light on display is on, no text or symbols are shown at this state.
BIOS password has never been activated
BIOS Administrator Password has never been activated
Internal Network Adapter Boot never enabled

Hi,
On the link below is a brief guide ( and the download ) to create a bootable Antivirus disk. Create this disk on another PC and when done, start the infected PC so that you can open the DVD drive, insert the Antivirus CD you've created and then restart the infected PC to initiate the process.
http://www.techmixer.com/kaspersky-rescue-disk-load-kaspersky-antivirus-2009-using-dos/
Let me know how you get on.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Compaq Presario S4500UK Won't start after wall-socket disconnect. Is this a CMOS battery issue?

Recent software rebuild with additional internal HDD (March 2011) as dual-boot WinXP/Linux setup worked fine. CD/DVD RW drive started to give cyclic redundancy check errors so replaced drive a week ago. All still OK. Change of electricity provided and increased energy usage conciousness switched off machine at the wall overnight after normal shutdown. Machine would not restart in the morning. Did not load BIOS; all lights came on briefly and then went dead after 3-4 seconds with power light still on. One can get a similar effect by plugging the keyboard into the PS2 Mouse Socket as I did once!
After 20 minutes or so trying all sorts of things managed to boot from Linux CD. Shut down/restarted and all's fine provided I don't switch off at the wall. Also seems to be OK after brief 5-10 second power off but problem persists with any long disconnection. It seems that after 10-15 minutes power-on and 2-3 attempts at restarting, the BIOS comes up and all's well, although it has stopped in the middle of a Windows or Linux start-up on one or two occasions.
Am I right in thinking the problem might be the result of a dead CMOS battery? The reason I ask is that the clock seems to keep time OK and there are no apparent issues with BIOS once it loads.
Any help/guidance would be much appreciated. Further config info below.
Compaq Presario S4500UK Bios v3.03 dual boot WinXP Pro SP3 / Linux Ubuntu 10.04 Lucid (2.6.32-33)
HDD 120GB (original Seagate Barracuda 7200) Master Boot Record, Partition Table, WinXP, Linux, Swapfile etc
           500GB Western Digital Caviar Blue (encrypted)
CD/DVD ROM (original JLMS XJ-HD166S)
           Recently installed HL-DT-ST DVD-RAM GH22NP21 replacing NEC ND-1100A
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I didn't get any replies so I went ahead with replacing the CMOS battery but that hasn't helped. The problem is also evident if I power down and leave it for about an hour or more before trying to restart even if I don't disconnect the wall socket. It seems to take about 15-20 goes at restarting before it fires up. I would be really grateful for any clues as to what's wrong.
Tks
jg1
This question was solved.
View Solution.

Still no replies to my increasingly ticklish problem so I'll give you the benefit of further investigations in case it prompts some words of wisdom...
So it's not the CMOS battery. Other symptoms emerge...
1.    "Crashes" are absolute, immediate and without warning - just like someone turned the lights out.
2.    "Crashes" also happen occasionally when firing up Truecrypt using the "Auto-Mount Devices" option but thus far have not occured when selecting the required device first.
3.    The problem appears to be getting worse in that it takes longer to persuade the machine to start from cold.
4.    If I remove one of the HDDs the machine boots up fine - or it has so far (about 10 times after power disconnect for 1hr or more).
This makes me start to suspect the PSU. I've done the diagnostic checks on the HP website
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
and it appears that the Power Supply is working just fine but if I remove a device not required at boot-up the thing will fire up first time. My analysis seems to suggest that the existing PSU (Lite-On PS-5251-08HP) rated at 250W is working at near capacity but it cannot service the peak loads when the HDDs spin up during boot-up.
Can anyone confirm this, pls?
If this is the case, can anyone suggest a suitable upgrade? There's loads of product out there with prices ranging from £15 to £150 but as I'm a bit of a numpty and I don't seem to be able to narrow the choice down sensibly. I've tried going through the info on the HP website and various tech forums/fora without getting very far. It would be brill if there's someone out there that knows the product and could share their knowledge.
Tks in anticipation!
jg1

Hp tx1025 won't start after cleaning heatsink

hello. i have a hp tx1025. this is not the first time i have cleaned a heatsink from a computer but it is the first that i have done so with this hp. i do not know where i went wrong. disassembly was not complicated and i made sure that i connected back each component that i unplugged. after putting the laptop back together, plugging it it, and switching the power button i got nothing. no light, screen flicker, no fan sound, nothing. i disassembled and reassembled several more times each time taking longer and longer just to make sure i was not forgetting anything and still nothing. i do not know what to do. any help would be appreciated. thanks in advance.

sorry. poor choice of words. when i plug the ac/adapter into the laptop the white light illuminates at the connection point as always. but when i slide the power switch nothing happens.
don't know what i did because disassembly was not complicated at all.
thanks

HP(Compaq) mini 110 has lights but won't turn on

My Compaq mini 110 won't power up. The light where the plug attaches is lit. The wite and blue leds on the front are lit. When the power switch is activated, the internal fan bumps but immediately stops. No noises of any kind. Battery is unplugged - just the power cord used. Main system board just replaced and it does the same thing so that is not it unless I got a bad replacement board. The powerboard has 19V at the main 4 pin connector (2 red and 2 black wires). I cannot find a pin out of voltages for the 18 wire connector running to the mainboard. Could the power board be bad but still light all lights? Not sure what to try next.

Hi,
I have the same problem. Started to night... Computer operated normaly and then just gave a bluescreen... Now works for 30min and then shuts off. I dont hear the fan work at all. I cleaned the fan with air and still dont work. How to make sure that the fan works? and how to replace if it dosent work.
- Mika

Mac Mini won't start after installing OS X 10.6.3

My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
So, following the above guidelines, reinstall 10.6.3.

Compaq mini 110

compaq mini 110 is saying enter CURRENT password
the code that comes up is CNU9354VZ1
please help, thanks

Hi,
Try a Hard Reset as follows.
Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Plug in the AC Adapter ( leave the battery out for the moment ).
Tap away at the esc key as soon as you start the notebook to enter the Start-up Menu, then select f10 to enter the Bios Menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Firefox won't start after an update. Firefox help says check virtualization settings. What is virtualization settings and where do you check them and for what? I have Windows XP

Firefox won't start after downloading update. I've reinstalled Firefox, still won't start. Help says check virtualization settings. What and where are virtualization settings? I have Windows XP.

This might be Zone Alarm since it provides virtualization. Please try the instructions to turn off virtualization in the following support question
http://support.mozilla.com/en-US/questions/880170

IPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?

Had to upgrade according to screen. iPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?
I have restarted the computer. Brand new iMac intel. v 10.9.4

You need to upgrade iPhoto for Mavericks. Download the upgrade using App Store.

C3-01 won't start after charging

I'm so angry right now but I will try and be cool about this!
I bought C3-01 mobile phone about four months ago and it is already causing me problems.
The mobile phone simply won’t start after charging. Last time i charged it, it miraculously came to life only, and only after annoying me for about hour and a half. Now I fear it is completely dead!
Battery was not completely empty so the phone should still start even if the wall socket is broken. Which is not, wall socket works perfectly.
Nothing helps! I tried removing the battery and then restart. Removing the battery then removing the sim card, memory card and that piece of “advanced technology” simply won’t start!
I didn’t buy my new phone so that I can use my old Motorola mobile, which btw., still works after 4 years of intense usage.
I will never buy Nokia again!

Hi,
Sorry to hear that your phone is not starting after charging.
I would suggest one more thing, which maybe helps. If you have another battery, please try.
If not, i would recommend to visit Nokia Care Point in your area.
To find your nearest Nokia Care Point, visit http://www.nokia.com/support and select the Repair page.
Br
Mahayv

Compaq mini 110 Bios pasword reset

compaq mini 110 CNU9275YOM pls master code... Thanks

Remove the bios battery and the battery waited for 2 days. When I try to reinsert the password again asked me.

Compaq mini 110 CNU927BB89 ŞİFRESİNİ BULAMIYORUM

compaq mini 110 CNU927BB89 ŞİFRESİNİ BULAMIYORUM
This question was solved.
View Solution.

Hi,
Enter: e9lo7xppuo ( 3rd character is a lower case L )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HI I have a problem with my Firefox, recently my fire fox won't start after I click on its Icon

HI I have a problem with my Firefox, recently my fire fox won't start after I click on its Icon, when I see the process in task manager Firefox is there but after a second it will end processing automatically, I have tried ff7 and ff6 and have the same problem, even re installing the Firefox doesn't fix the problem, any one know the reason? I'm using a win7 64bit, and bitdefender internet security

Hi All,
This is not a virus . I used this website & I found it very useful & you can remove it through the following steps.ar.hao123.com 1- Then right-clicking on the icon Mozilla Firefox on the desktop, then choose "Properties", as shown in the picture: 2- Select Tab "shortcut", and then delete the text after. Exe in "target" as shown in the following picture, then press "Ok" 3- Open Firefox, and then choose "options" from the list of "tools" 4- Select the tab "general", and in the list "when Firefox starts" then select "show my homepage" and in the box "homepage" then enter any other link and then press "OK"
you can visit [http://ar.hao123.com/report/ar-feedback.html Hao123] hao123
ar.hao123.com

Firefox won't start after update - nothing in support pages helps

windows 7 - firefox won't start after update - no support pages are relevant

-> [[Firefox will not start]]
Check and tell if its working.

Firefox won't start after google chrome imported all data(bookmarks,passwords,history,etc) from firefox

firefox won't start after i import the data to google chrome.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
See also:
*http://kb.mozillazine.org/Browser_will_not_start_up

HT4623 iPhone 4S won't start after iOS 6.01 update any ideas

My iPhone 4S won't start after doing the latest update that came out today I believe it was iOS 6.01 or 6.1

Have already tried that to no success. I have hooked it up to the computer and itunes came up saying phone was in recovery mode and needs to be restored.. So im i the middle of trying that. Thanks for the suggestion..!!

Compaq Mini 110 won't start after cleaning Think Point virus

Similar Messages

Maybe you are looking for