Compaq mini 110c-1010ee password bios

when i switch on laptop it gives enter current password. if i enter the pasword still it does not work, it gives the message " password checked failed. fatal error..... system halted. cnu9245hv5

Try>> e9lo7vqz6q
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • How to recover compaq mini 110c bios password.

    Hi, Please help unlock compaq mini 110c bios password.
    Fatal error code generated CNU9313F9X
    Thanks

    Hi,
    Please try this (under HP or Compaq),
    Good luck,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Compaq mini cq10 130 sf bios password

    Can you please help me with a compaq  mini cq10 130 sf bios password ?
    i try to change bios battery and error
    enter current password: ????
    error CNU94936JX
    Thank you for your help,

    Rode try.
    e9lovofgw4   or   e9lovofgwr
    3rd letter lowercase L.
    4th  and  6th letter lowercase O.
    Use that code to go into the BIOS.
    Disable all passwords that are enabled.
    IF asked for the CURRENT password use that code.
    IF asked for NEW password just hit enter.
    If asked to VERIFY password just hit enter.
    Save and exit.
    REO
    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Hp (compaq) mini 110c - no boot with Western Digital Scorpio Black WD5000BEKT

    Dears
    I just bougth Western Digital Scorpio Black WD5000BEKT plug in and no boot  
    I have black screen, HD is alive because i hear is started and the HD led blink in same frequency so looks like Bios cannot read HD firmware to do initialization.
    Motherboard version should be 308f if not mistaken, AMI BIOS has not been upgrade yet, actually i saw only one BIOS update which fix some Bluetoth issue. 
    Could anybody can confirm that disk is running OK on that model ?
    Is there any quick workaround ? 
    I would like to avoid editing(moding)  the BIOS if possible. 
    I am looking forward for your answer
    Link to the HP mini
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01894558&lc=en&jumpid=reg_r1002_us...
    Any support will be highly appreciates.

    No problem maiki83. I am glad you got it running.
    I believe however, that the processors are all fixed to the system boards in the Compaq Mini 110c series. Not having your exact model number, I will show you first how to find your exact model number, and then where to find the information (if it exists).
    <How Do I Find My Notebook Model Number>: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
    Go to HP's support page and "Enter your product name/number".
    HP Consumer Support:
    http://support.hp.com/
    When you are on your products support page go to the 'User Guides' section
    Look for the "Maintenance and Service Guide"
    In the guide locate the "Removal and replacement procedures" then the "Component replacement procedures"
    If there is a "CPU" or "Processor" category then it will have a list of supported CPU's.
    If you can only locate "System Board" then the list of boards will show the processor that comes on the boards. The latter will most likely be the case.
    Good luck.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Compaq Mini 110c-1001NR Sound Drivers won't install

    I am fixing a Compaq Mini 110c-1001NR for a friend. They reinstalled XP on it, so I had to install wireless internet drivers for them. I then realized the sound doesn't work. I downloaded the drivers from HP's website (yes they are the right ones!), but half way through the install, it said it couldn't find any compatible hardware. I don't know what is wrong. That laptop has windows XP on it, so it should be compatible, right?
    Please help asap. Thanks.

    Hi:
    First install the chipset driver and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-71064-1&cc=us&dlc=en&lc=en&...=
    Uninstall the audio driver and first install this:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    Then see if the audio driver will install.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-71197-1&cc=us&dlc=en&lc=en&...=
    Paul

  • HDD for Compaq Mini 110c-1001NR

    I received a Compaq Mini 110c-1001NR netbook a week ago as a gift and I really like it. However I realised that the HDD is only a 16GB Solid State Drive. Can someone please let me know if it is possible to change to a 160/250GB Hard Disk?
    While on the topic of upgrading, does anyone know if the RAM can be upgraded to 2GB?
    I am sorry if this has been answered before but I seem to have trouble finding answers for these in HP forums and on the net in general.
    Thanks in advance for any assistance.
    Message Edited by EDDC on 10-22-2009 07:12 PM

    Hi:
    First install the chipset driver and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-71064-1&cc=us&dlc=en&lc=en&...=
    Uninstall the audio driver and first install this:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    Then see if the audio driver will install.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-71197-1&cc=us&dlc=en&lc=en&...=
    Paul

  • Compaq mini cq10 130 sf bios password help

    Can you help me please with forgotten Bios password,its giving me this error code : CNU9496HJZ Thanks alot

    Steps to be followed:Use the unlock code posted above to enter the BIOSDisable all passwords that are enabledIf asked for current password - type the unlock codeFor new password, just press ENTER keyRepeat the same for verify password column.Then leave the BIOS by saving & exit option to save the changes. Troubleshooting:Incase if the Password doesn’t work please try a Hard Reset as follows.Shut down the notebookUnplug the AC Adapter and then remove the batteryHold  down the Power button for 30 secondsPlug in the Power/AC Adapter (Leave the battery out for the moment) & Start the NotebookIf you now see a password box, Please type the same Password I shared before and press enter Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL 84Although I am an HP employee, I am speaking for myself and not for HP

  • Compaq mini 110c error message 'ENTER CURRENT PASSWORD'

    after battary goes down I recharg my laptop and when I turn it on it is now ask me for CURRENT PASSWORD
    I don't remmber I had one !!
    please Help 
    C/N: CNU9239J8D

    Hi,        Use the below code to reset e9lo7fowut Or generate one from the below link http://bios-pw.org/ Use the unlock code posted above to enter the BIOSDisable all passwords that are enabledIf asked for current password - type the unlock codeFor new password, just press ENTER keyRepeat the same for verify password column.Then leave the BIOS by saving & exit option to save the changes.

  • COMPAQ MINI 110C-1030EV

    I lost the password to insert the bios, how reset it?

    Anodos try.
    e9lofx1nph
    Third letter lower case L.
    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Compaq Mini CQ10-130ca manual bios recovery how ??

    The netbook is stuck at the Compaq logo with the F9 and F10 key message. I sometimes, rarely, manage to see the amibios page for a fraction of a second by pressing Escape; I read CMOS checksum bad. The RTC battery was checked: it still delivers 2.9V. I did manage ONCE to boot to the legacy F.01 BIOS and to do a full install of Win7 starter and updates on a blank HD. However this morning the pc refuses to post, as if the CMOS had cleared: I had set it up for a 10 sec countdown before boot but that does not show up any more. I think I need to flash the BIOS with afudos or amiflash, but the only file downloadable is an exe sp file. Any solutions?

    Sometimes the exe can be open with 7-zip and the BIOS bin or rom can be found.  Try it.  Then you may be able to flash the BIOS but do not count on it.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • Compaq mini need a password

    Please help me D: when i start my pc i get
    enter current password:x ect. then fatal error system hatled
    error: CNU0052T9Z. Need help
    This question was solved.
    View Solution.

    Hi,
    Try entering:     e9l11q7ao0        ( 3rd character is a lower case L and the last is Zero )
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Compaq hp mini 110c-1100DX

    Compaq mini 110c-1100DX is at the black screen asking for CURRENT password but we do not obtain one that will work at the moment. please help s/n: CNU9424jyyp/n:VM 146UA#ABA

    Hi, Please try (lower cases):    e9lov7vwii if doesn't work, please try 3 times and post back error code. Regards.

  • Compaq Mini 110 won't start after cleaning Think Point virus

    Hi
    I'm helping my daughter with the following problem with her Compaq mini 110.
    After removing the Think Point virus according to advice in different places the mini 110 don't boot after power on. The choice of pressing F10 (BIOS setup) and F9 (boot order) appears. If I don't touch any key at startup it starts accessing the hard disk for a few seconds, according to the hard disk LED and hard disk sound. Then it stops the boot procedure. Somewhere on the HP web site I read that pressing F11 repeatedly during boot would give the opportunity to choose operatings system recovery from the recovery partition. It doesn't respond to F11. Setting boot device priority doesn't seem to be a solution, since there is only one choice, so I can't force it into the recovery. I would appreciate any advice how to proceed. Below I add som additional facts.
    Some threads on the forum mentions pressing F6 for recovery funktions, but it doesn't respond. There also ought to be some function on F12, but I can't figure out what. Doesn't respond anyway. Any explanation for F6 or F12?
    Thanks,
    Per
    FACTS:
    Computer model: Compaq Mini 110c-1100SO
    OS is Windows XP as supplied with the computer and was never changed.
    Hard disc diagnostics in BIOS setup performed without error reports (160 GB, disc type suggests Seagate hard disc)
    RAM diagnostics in BIOS setup performed without error reports (1 GB)
    Pressing F9 at startup gives no choices apart from the hard disk, no choice for partitions or USB boot.
    I have set the delay for the user to press F10 to 5 seconds.
    The display/screen works properly during BIOS setup
    Power adaptor connected, and charging LED lights constantly (as I expect it to do)
    Power on LED lights constantly
    Wireless network LED lights constantly
    Caps lock LED flashes briefly at start up, then gets dark.
    When booting stops, background light on display is on, no text or symbols are shown at this state.
    BIOS password has never been activated
    BIOS Administrator Password has never been activated
    Internal Network Adapter Boot never enabled

    Hi,
    On the link below is a brief guide ( and the download ) to create a bootable Antivirus disk.  Create this disk on another PC and when done, start the infected PC so that you can open the DVD drive, insert the Antivirus CD you've created and then restart the infected PC to initiate the process.
    http://www.techmixer.com/kaspersky-rescue-disk-loa​d-kaspersky-antivirus-2009-using-dos/
    Let me know how you get on.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to change password (bios)??

    Please help me to get bios password Compaq mini 110c-1020sl, CNU9271R2V. Tkank you very much!!!!!!!!!
    This question was solved.
    View Solution.

    Hi,
            Use the below code to unlock
    e9lo7x3b76  (Third Letter is L)
    Use the unlock code posted above to enter the BIOS
    Disable all passwords that are enabled
    If asked for current password - type the unlock code
    For new password, just press ENTER key
    Repeat the same for verify password column.
    Then leave the BIOS by saving & exit option to save the changes.
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • Need the latest driver for Broadcom 802.11b/g WLAN to upgrade XP to Windows 7 on my Compaq Mini 110

    Windows 7 advisor says to download the latest driver for Broadcom 802.11b/g WLAN before I can upgrade from Winows XP.  My notebook is a Compaq Mini 110c-1100CA.
    Please get me the latest driver.
    This question was solved.
    View Solution.

    Here you go:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-76268-1&cc=us&dlc=en&lc=en&​...
    These drivers will get you working with Windows 7 32 bit. Windows Update might have a later version after you get this installed. Paul linked you to an XP driver above but I believe you are looking for a Win 7 driver.
    If this is "the Answer" please click "Accept as Solution" to help others find it.

Maybe you are looking for

  • Quicktime 7 not playing videos from Itunes...

    So recently I noticed my Quicktime 7 has been acting strange. It used to play all my videos flawlessly... it still does, although i've noticed movies bought from the itunes store wont play anymore. When I try to open the file on QT 7 I get the black

  • I had to refresh my laptop and all my apps were removed how do i get them back?

    I have a Pavilion dv6-7010us Entertainment PC -- operating system Windows 7 -- upgrading to windows 8 when the laptop would not update -- kept stalling at 12% -- said the D:windows\system32\log files\srt\srt trail.txt was missing -- refreshed the com

  • Automatic RPD deployment to multiple sites

    Hi Guys Please assist me here. I have a one DEV ,one QA and 18 PROV OBIEE instances at different sites geographical locations in Southern Africa. these environments are stand alone. I want to develop once and QA once and then deploy to 18 sites once.

  • Table name where the text attachments stored

    Hi folks,          I have created an text attachment while creatng PR. where do these attachments store. In which table can  i see the attachments that i have made while creating PR.Please suggest. Shyam.

  • Setting In and Out Points for Render

    Hi everyone! I was wondering how to tell color to only render from and in and out point, instead of rendering for a whole clip. In FCP I take a ten minute capture, then break it up into sub-clips for each shot, and then edit some of these sub-clips i