Compaq Mini 700 will neither run from, nor charge the battery
Netbook will only run from mains charger.
Original battery flat, battery icon has a red cross through it.
I tried a n new battery which is recognised as 56% charged.
No charge light and no "charging" message. Netbook shuts down when the charger lead is removed.
I have replaced the power socket as the connections looked suspect, but still no joy.
Any suggestions?
model 702EA Windows XP
OK, I guess I'm having the same problem... When the "Mini" was purchased, everything worked fine. I normally leave the "Mini" with the AC adapter plugged in on my desk. The little light by the plug on the computer is illuminated, so I'm supposing that the unit is charging. However, when I unplug the unit from the adapter, the computer shuts off, and it will not turn back on unless it is plugged into the adapter (so much for portability)... Any suggestions??
Similar Messages
-
Is the 12W charger compatible with ipad mini? will it damage my ipad or the battery?
the 5v charger which came with the ipad mini is charging too slow...
am just wondering if the 12w charger can be used to charge my ipad mini?
will it damage the ipad mini itself or the battery?The 12W charger from Apple will in fact charge the Mini just fine. There is no issue with using that charger. It supports amongst other things the iPad mini as per the compatibility list here:
http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter?fnode=3c -
No audio on jack for compaq mini 700 (702EA) running XP proffesional
hi,
I have no audio coming out on the audio jack (headphones).
my compaq mini 702 EA is running XP profesional.
any ideas?
thank youTry downloading and installing bootcamp 3.1 it fixed my sound for me.
-
Compaq mini 700 enter current password fatal error system hatled
Compaq mini 700 laptop fatal error system halted.
CNU9192NQN
Can you help me plz ?
This question was solved.
View Solution.Hi
Try this : e9lo3o7959
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
Compaq mini 700 model 735ED windiws 7 password check failed system halted CNU91453V3
Ciao sono nuovo nella comunita ,e non so ancora bene come funziona.
ma come o gia detto o un compaq mini 700 model 735ED con windiws 7 e ho acceso stamattina e sulla schermata nera mi diceva di inserire la password al bios ,(non so se ci ha messo le mani mio figlio ma e strano) quindi dopo vari di inserimenti password mi dice " password check failed system halted CNU91453V3" vi prego aiutatemiHi,
Please see the reply on your earlier thread on the following link.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/hp-mini-compaq-700/m-p/4491550#...
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
since yesterday I have been unable to use FaceTime across all my Apple devices: Iphone 5s, MAC Notebook, and Ipad Mini. It does not connect nor make the ringing sound. Why is this and how can it be fixed?
I am haveing same problem canot find itunes.msi
-
hello. today i ordered iphone 4s throughout apple online shop.actually i have lived in australia and iphone will be delivered from usa using the ship. is it available in australia although it will be delivered from usa?
Not yet. The iPhone is supposed to be released worldwide this month.
-
Compaq nc6000 not charging the battery
Hello,
I'm having a problem with a Compaq nc6000 I'm trying to fix up for a freind. It doesn't appear to be charging the battery. It will run off the battery and the external power just fine, but the charging indicator does not come on and the power management in XP doesn't show any increase in the battery's charge. If the battery won't charge, this laptop will turn into a desktop once the battery is dead. Does anyone know where the charging circuit for the battery is located? I'm hoping it's not on the mainboard, but I expect it is.
Any chance this is a problem with the OS? This is a laptop that came off-lease and there's something strange about the install of XP that's on it. I can't put my finger on it, but something just doesn't seem right.
Message Edited by cybrsk8r on 06-02-2009 11:47 AMHello;
Two years ago I had this same issue. Bought a new charger. Still would not charge. Bought a new battery. That fixed it.
Now I am in the same situation....maybe. The charger registers as on AC power. It will keep the battery from going deaf, but will not charge.
If this was a mother board issue instead of battery how would you know?
So, even though this is an older computer I am considering purchasing a new battery.
As far as I know even in perfect working condition my laptop is not worth a dollar.
Laptops are more difficult to diagnose and I don't know anyone who will repair them.
Wishing us both good luck,
Chris -
My IPad screen is dark and will not turn on. I have charged the battery and no luck. I have tried to restart it multiple times with no luck. During the restart, the screen will flicker like it is trying to restart but the silver apple never shows. Any suggestions?
Please tell me that it has NEVER been jailbroke. If it has never been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this. -
MacBook runs extremely hot when the battery is in!
To start off... I'm a quite savvy user. I've built PC desktops, I repair computers for friends and family, and I'm interning at an Apple Authorized Service Provider. However, I'm having an issue that is totally stumping me. I recently took my MacBook apart to clean it and apply some Arctic Silver 5 to the CPU and Northbridge. All went well, and without the battery in, my CPU temperature maxes out at 155 Fahrenheit (versus the previous max of 185). When I put the battery in (with CPU load at 100%), the CPU temperature jumps from between 145-155 to 200 very quickly. I checked the connection of the battery cable to the logic board, as well as all the other cables on the easily accessible side of the logic board. I triple checked all the cable connections on the underside of the logic board since I didn't want to have to take it out again. Any ideas as to why my system runs so hot with the battery in?
Hmm, I never knew that, and thanks for the quick reply! I guess I'll be taking the logic board back out and checking the heatsink and thermal paste application again. It was interesting, one of the screws in my heatsink was totally smooth; never threaded in the factory. I had to order a whole new set of heatsink screws. Perhaps the threading on the logic board itself is off and not letting the heatsink sit flush? That screw did give me some difficulty getting in.
Message was edited by: Wrenbird -
I have an IPad2. I've received two different ideas on charging the battery. One person indicates I should let the battery run almost down before recharging; another person indicated I should keep it charged closer to 100% . What is the best process for the best battery life over time?
I do exactly as Thomas Reed does. Always have from day one. Going on 15 months now and I get at least 10 hours of use out the battery every day. No matter how much juice is left on the device when I go to bed - I put the iPad on the charger - doesn't matter what the battery gauge says - I plug it in and let it charge all night.
-
version 6.1.6(10B500); model#MC547LL/A; 60GB (40 used/20 avail)
IpodT auto redirects to the power off (slide) option while in use. Then while not using it, it will not power off to conserve the battery. I have to enable the assistive touch to save battery life. Software states up to date with iOS 6.1.6. PLEASE HELP!Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Thinkpad Yoga S1 Runs off AC but won't charge the battery
I have recently purchased an S1, which is now having an issue that I can't seem to resolve on my own. The laptop works (almost) perfectly on A/C, but doesn't charge the battery. I noticed yesterday the battery was low (which was surprising, because I had only recently unplugged it) - so I plugged it in to charge.At which point, the battery icon in the system tray stated "8% (plugged in, not charging).I've tried the following to fix this: 1) Leaving it plugged in overnight completely off. 2) Running the battery calibration (fails w/ unexpected error). 3) Tried turning off battery optimization (Option is removed in newer version of drivers, so NA to my issue). 4) Tried reinstalling the power management drivers anyway (even though I already had the newer version). 5) Holding down the power button for 30 seconds, both plugged in and not plugged in (suggestion from forum). 6) Holding down the reset button (pin reset on the mobo) for 30 seconds, both plugged in and not plugged in. 7) Charging from BIOS. 8) Letting the battery run down to 0% in BIOS, then rebooting on A/C (another forum suggestion). Now I'm just at 0% plugged in and not charging. Previously I said the computer almost worked perfectly, the almost is that the CPU is stuck at ~800mhz, even with all power management turned off (including Speedstep in BIOS) and the power profile set to high performance. Can anyone think of anything else I can try before I give up and send this thing back? It was working perfectly for the last couple of weeks or so, including getting ~ 4, 5 hours of battery life, so unless the battery failed very suddenly I can't imagine why it would just start refusing to charge.
well I replaced the battery with another one I bought (exact same model for the battery SONY 45N1705, I was hoping I would get another battery version because I notice there is an update for the other battery revision that fixes issues with battery stopped charging. http://support.lenovo.com/us/en/downloads/ds001322. I forced the bios update from 1.07 to latest 1.24 using olydbg to skip the battery check. this did not help with anything relating to the battery. now I am stuck again where I was at the beginning..... im looking at buying a board replacement.... also I was looking at replacing the power supply but I check the voltage and the amps, and it is correctly matching what is written on the back of the laptop. still getting the 0% plugged in and charging.
-
I have an ipod mini. and when it comes on it shows the battery with a ! mark. What does this mean?
I have an ipod mini. When it comes on it shows the battery with a ! What does that mean?
That just usually means the battery needs to be recharged. If you have already tried recharging it, see some of the troubleshooting steps in this Apple support document.
Charging your iPod battery
B-rock -
I have just updated my 4s to IOS7. and now my battery discharge is significantly increase. With my Iphone fully charged, the battery run out within 6 hours without using the phone at all. Would it be possible to get the IOS 6.1.3 back to my 4S?
Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
Anything else I could try, or am I doomed!
All of your help is much appreciated, thanks
Maybe you are looking for
-
650M Recovery partition delete my disk. How do the terminal command to create a new hidden in the Apple boot partition?
-
How to retain selected value in apex_item.select_list?
Hi, I've a report region query- select distinct col1, col2, APEX_ITEM.HIDDEN(2,col3)|| APEX_ITEM.SELECT_LIST(1,'No_Action','Valid;Y,Invalid;N') Action from <tab1> When 'Y' (valid) selected from the select list and SUBMIT is clicked - a validation and
-
Close an external swf which is part of an array
Hi. Noob and having to learn all this pretty quick.. So thanks for any help you can give me. Here's the basics - Flash cs4 and as3. I'm making an app which is, at the moment, a game. I have an animation on the maintimeline - this (at the momoent - un
-
Same AppSet Name, 2 Different Server (Prod and Dev) causing XML corruption
Thx Edited by: Joan Perrella on Oct 2, 2010 12:33 AM
-
We just switched to studio12 and I think we are having problems with the compiler/linker switch -xs which detemines whether the debug info is saved in the object or in the (in our case) library. We see this when compiling/linking on both SunAMD and s