Compaq mini 702EA Using win7,32bit, Webcam not working

Hi
I bought a compaq mini 702EA using win 7 starter and I have been all around Hp website and cannot solve this problem re: cannot get the WEBCAM to work..any help please.

I am not tech savvy and need help with getting the in-built webcam to work. I have not been able to find out how to get this Built in Webcam to work at all. I am able to attach an external one though.,
not sure how to activate it or if i am expected to download special software or the like in order to complete activation etc..etc.. please explain

Similar Messages

I have Photoshop CS2. Using Win7 [32bit]. Unable to use Transform & Free Transform, (faded print).

I have Photoshop CS2. Using Win7 [32bit]. I am unable to use Transform & Free Transform, (faded print).
It has been available to me up to now. I have tried all I can think of to bring it back.
Hoping someone out there can help, thanks.
Regards, Patrick.

Thanks for your early reply, most appreciated.
Firstly, I downloaded the screencast.com, which I failed to understand
at this time.
In your e-mail you mentioned about Layers palette being visible. I
should mention here that I have never used Layers and I've had my CS2
since 06/2005. I have only used the basics but would have liked to have
experimented with all that's on offer.
Anyway I went to Layers and clicked on New Layer, the went back to
Tranform and Bingo!, it was up and running.
You are a genius for putting me on the right track, I've been without
Transform/Skew & Warp for nearly two years!
Thanks again.
What do I do now do I goto the Forum or does this e-mail get sent to there?
Regards, Patrick.

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week.
Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
Fix:
With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
It also supported AOL, AIM, Google Talk, Jabber.
Guess I miss it frist time... hope this helps...

HP mediasmart webcam (not working)

Hello. I've a Hp pavilion dv6 2150 us.
The problem is the next one: My webcam works fine, but not all the time... Sometimes it doesn't work and show a message that says ''no webcam detected, try plugin in a webcam into your computer now. If you are using an integrated webcam , make sure that it is turn on''
Of course im using an integrated webcam. and it is turned on, enabled an all. I've Updated my webcam, download other versions of the driver, unistalled, installed back, used recovery system, looked for others drivers for the hp pavilion dv6 2150 us. But it keeps doing the same. One moment is alright, at other moment it lost the device ...
What can i do? it is really anoying and not useful at all if when i need to use the webcam it is not detected.
Specification: HP pavilion dv6 2150 US, 4 gb memory ram, windows 7 ultimate 64 bits,

Hi @rajeshomtri ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dm4-1162us Entertainment Notebook and issue with the WebCam not working correctly. Here is a document on troubleshooting the WebCam for Windows 7.
If that does not help I would uninstall the drivers and software.
Hope this help you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Uploading Files Using InputFile Component -- Sometimes not working

Hello,
This is the 2nd time I make a post about it!
Because I have more than 1 application using upload, and everything is correct! But it doesn't work as it should!
You can check the original post here: Uploading Files Using InputFile Component - Sometimes not working
I need a solution please!
The only thing we can conclude is that it could be a bug from oracle !!! (???) But I talked with other people and they say that it works fine for them.
There is one important thing: when we put a form to "Uses Upload = true" it seems that the page doesn't work very normal. For exemple: if you use a table in a form that uses upload the table get's "crazy".
Thanks,
JP

I have now access to METALINK!
I can find some problems and patches about inputFile but not mine! I will check better later!
I think the problem is caused because of my framework!

HT204053 When I try to login to my apple ID on my iphone 4 to use facetime, it will not work and tells me to check my connection? I have even tried creating a new apple ID but the same message appears

When I try to log onto my Apple ID to use facetime, it will not work and tells me to check my connection. I have even tried creating a new apple ID but the same message appears. I do not understand why this is happening, could anyone help me resolve this issue it is very frusterating that I can not enable facetime or imessage.

I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

How can I transfer songs from my iPhone 4 to my new mini iPad. My PC is not working.

How can I transfer songs from my iPhone 4 to my new mini iPad. My PC is not working.

if they're songs you purchased from itunes go to the itunes store on your ipad, go to purchased, and download from there.

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
Camera Raw: How to use Adobe DNG Converter - YouTube

I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, HELP

I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, so i put the old batterys in and it still wont turn on. I am getting so angry woth apple things, the make it sound better than it is and over pice it, i paid over a grand for my imac and it dont even come with a cd SLOT. Please can some one help!

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

Webcam not working

Hello, not surewhere to post this but i have the hp g42 475dx and i recently reset it. Everything else works fine but the built in webcam will not, im more than likely missing a driver, and it doesnt pop up in device manager. Hp wants me to pay them 60$ to fix it so im hoping someone else can help! please help! thanks.

Hi @AlexJakubiak ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue on your HP G42-475DX Notebook PC and the Webcam not working. Here is a document on how to troubleshoot the Webcam and the software. It shows you how to test the Webcam.
Here is a link to troubleshoot the WebCam and it does include some steps to take when it is not seen in the device manager.
Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system. Here is a link to the YouCam software if you need it.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HT3867 automatically connect to known networks using wi fi is NOT working

"automatically connect to known networks" using wi fi is NOT working. Please can any one help

Hi jvichatt,
Welcome to Apple Support Communities.
You may find some of the steps in this article helpful for troubleshooting your Wi-Fi connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Best,
Jeremy

I will using of firefox but not working shortcut key of website.

I will using of firefox but not working shortcut key of website.
It's working in chrome and I.E.

Check the connection settings.
*Tools > Options > Advanced : Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

TS1307 The port I'm using is 465. Not working. Just need the setting for outgoing mail. Incoming is still working.

The port I'm using is 465. Not working. Just need the setting for outgoing mail. Incoming is still working.

"Well Known" TCP and UDP ports used by Apple software products
http://support.apple.com/kb/TS1629?viewlocale=en_US

I cannot get past the password screen on my old laptop - I'm entering the password I always used and it is not working

I am trying to log on to an old laptop and I cannot get past the password screen - I'm using the password I always used and it is not working. Even the clue doesn't help. Is there anything I can do. The last time it was turned on the apple staff transferred data to my new laptop. Help

If the old Macbook(?) has Snow Leopard 10.6 installed, and you have that retail install disc or the system disc of the current (base level) system on it, you could use the installer disc as a boot volume and use the utilities on the booted install disc to reset the password. It should be a menu option in the booted Install disc, way short of any effort to re-install anything. And if your computer can do this, the same DVD has Disk Utility, to check/repair the Mac HDD.
What OS X version do you have, & what MacBook, etc is that?
Good luck & happy computing!

Compaq mini 702EA Using win7,32bit, Webcam not working

Similar Messages

Maybe you are looking for