- Compaq Mini c110 , cnu9300dcp , model 110c - 1010sa

help please
Compaq Mini c110 , cnu9300dcp , model 110c - 1010sa
Enter current password.................
This question was solved.
View Solution.

Hi,
You're more than welcome
All the best,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Hp (compaq) mini 110c - no boot with Western Digital Scorpio Black WD5000BEKT

Dears
I just bougth Western Digital Scorpio Black WD5000BEKT plug in and no boot
I have black screen, HD is alive because i hear is started and the HD led blink in same frequency so looks like Bios cannot read HD firmware to do initialization.
Motherboard version should be 308f if not mistaken, AMI BIOS has not been upgrade yet, actually i saw only one BIOS update which fix some Bluetoth issue.
Could anybody can confirm that disk is running OK on that model ?
Is there any quick workaround ?
I would like to avoid editing(moding) the BIOS if possible.
I am looking forward for your answer
Link to the HP mini
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01894558&lc=en&jumpid=reg_r1002_us...
Any support will be highly appreciates.

No problem maiki83. I am glad you got it running.
I believe however, that the processors are all fixed to the system boards in the Compaq Mini 110c series. Not having your exact model number, I will show you first how to find your exact model number, and then where to find the information (if it exists).
<How Do I Find My Notebook Model Number>: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
Go to HP's support page and "Enter your product name/number".
HP Consumer Support:
http://support.hp.com/
When you are on your products support page go to the 'User Guides' section
Look for the "Maintenance and Service Guide"
In the guide locate the "Removal and replacement procedures" then the "Component replacement procedures"
If there is a "CPU" or "Processor" category then it will have a list of supported CPU's.
If you can only locate "System Board" then the list of boards will show the processor that comes on the boards. The latter will most likely be the case.
Good luck.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Compaq Mini 110c-1001NR Sound Drivers won't install

I am fixing a Compaq Mini 110c-1001NR for a friend. They reinstalled XP on it, so I had to install wireless internet drivers for them. I then realized the sound doesn't work. I downloaded the drivers from HP's website (yes they are the right ones!), but half way through the install, it said it couldn't find any compatible hardware. I don't know what is wrong. That laptop has windows XP on it, so it should be compatible, right?
Please help asap. Thanks.

Hi:
First install the chipset driver and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-71064-1&cc=us&dlc=en&lc=en&...=
Uninstall the audio driver and first install this:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Then see if the audio driver will install.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-71197-1&cc=us&dlc=en&lc=en&...=
Paul

HDD for Compaq Mini 110c-1001NR

I received a Compaq Mini 110c-1001NR netbook a week ago as a gift and I really like it. However I realised that the HDD is only a 16GB Solid State Drive. Can someone please let me know if it is possible to change to a 160/250GB Hard Disk?
While on the topic of upgrading, does anyone know if the RAM can be upgraded to 2GB?
I am sorry if this has been answered before but I seem to have trouble finding answers for these in HP forums and on the net in general.
Thanks in advance for any assistance.
Message Edited by EDDC on 10-22-2009 07:12 PM

Hi:
First install the chipset driver and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-71064-1&cc=us&dlc=en&lc=en&...=
Uninstall the audio driver and first install this:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Then see if the audio driver will install.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-71197-1&cc=us&dlc=en&lc=en&...=
Paul

Compaq mini 700 model 735ED windiws 7 password check failed system halted CNU91453V3

Ciao sono nuovo nella comunita ,e non so ancora bene come funziona.
ma come o gia detto o un compaq mini 700 model 735ED con windiws 7 e ho acceso stamattina e sulla schermata nera mi diceva di inserire la password al bios ,(non so se ci ha messo le mani mio figlio ma e strano) quindi dopo vari di inserimenti password mi dice " password check failed system halted CNU91453V3" vi prego aiutatemi

Hi,
Please see the reply on your earlier thread on the following link.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/hp-mini-compaq-700/m-p/4491550#...
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to recover compaq mini 110c bios password.

Hi, Please help unlock compaq mini 110c bios password.
Fatal error code generated CNU9313F9X
Thanks

Hi,
Please try this (under HP or Compaq),
Good luck,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Compaq Mini 110 won't start after cleaning Think Point virus

Hi
I'm helping my daughter with the following problem with her Compaq mini 110.
After removing the Think Point virus according to advice in different places the mini 110 don't boot after power on. The choice of pressing F10 (BIOS setup) and F9 (boot order) appears. If I don't touch any key at startup it starts accessing the hard disk for a few seconds, according to the hard disk LED and hard disk sound. Then it stops the boot procedure. Somewhere on the HP web site I read that pressing F11 repeatedly during boot would give the opportunity to choose operatings system recovery from the recovery partition. It doesn't respond to F11. Setting boot device priority doesn't seem to be a solution, since there is only one choice, so I can't force it into the recovery. I would appreciate any advice how to proceed. Below I add som additional facts.
Some threads on the forum mentions pressing F6 for recovery funktions, but it doesn't respond. There also ought to be some function on F12, but I can't figure out what. Doesn't respond anyway. Any explanation for F6 or F12?
Thanks,
Per
FACTS:
Computer model: Compaq Mini 110c-1100SO
OS is Windows XP as supplied with the computer and was never changed.
Hard disc diagnostics in BIOS setup performed without error reports (160 GB, disc type suggests Seagate hard disc)
RAM diagnostics in BIOS setup performed without error reports (1 GB)
Pressing F9 at startup gives no choices apart from the hard disk, no choice for partitions or USB boot.
I have set the delay for the user to press F10 to 5 seconds.
The display/screen works properly during BIOS setup
Power adaptor connected, and charging LED lights constantly (as I expect it to do)
Power on LED lights constantly
Wireless network LED lights constantly
Caps lock LED flashes briefly at start up, then gets dark.
When booting stops, background light on display is on, no text or symbols are shown at this state.
BIOS password has never been activated
BIOS Administrator Password has never been activated
Internal Network Adapter Boot never enabled

Hi,
On the link below is a brief guide ( and the download ) to create a bootable Antivirus disk. Create this disk on another PC and when done, start the infected PC so that you can open the DVD drive, insert the Antivirus CD you've created and then restart the infected PC to initiate the process.
http://www.techmixer.com/kaspersky-rescue-disk-load-kaspersky-antivirus-2009-using-dos/
Let me know how you get on.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Compaq Mini CQ10-400 IDT High Def Audio Code 10

I have IDT High-Def Audio Codec problems - Code 10. Info below and thanks for your help.
Basic Info about HP-Compaq Mini CQ10-400
Manufacturer: Hewlett-Packard
Model: Compaq Mini CQ10-400
Processor: Intel Atom CPU N450, @ 1.66 GHz 1.67 GHz
Installed RAM: 1.00 GB
System Type: 32-Bit OS
Pen and Touch: NONE
Windows: Windows 7 Starter
Copyright: 2009 Microsoft Corp.
   Service Pack 1
Windows is activated.
Prod ID: 00342-OEM-8992752-30008
Device Manager shows:
   IDT High Definition Audio CODEC with "yellow Exclamation mark"
   General: This device cannot start (Code 10)
   Driver: Provider: IDT.Inc
       Date: 2013 - June - 03
       Version: 6.10.6482.0
       Signer: MS Win HW Compatiblity Publisher
       Name: Win\sys32\drivers\stwrt.sys
This question was solved.
View Solution.

Hi:
The only suggestion I can offer is to reinstall the audio driver, and see if that remedies the situation.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-84562-1&cc=us&dlc=en&lc=en&...

Need the latest driver for Broadcom 802.11b/g WLAN to upgrade XP to Windows 7 on my Compaq Mini 110

Windows 7 advisor says to download the latest driver for Broadcom 802.11b/g WLAN before I can upgrade from Winows XP. My notebook is a Compaq Mini 110c-1100CA.
Please get me the latest driver.
This question was solved.
View Solution.

Here you go:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-76268-1&cc=us&dlc=en&lc=en&...
These drivers will get you working with Windows 7 32 bit. Windows Update might have a later version after you get this installed. Paul linked you to an XP driver above but I believe you are looking for a Win 7 driver.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Microphone not working after upgrading to windows 7 on Compaq Mini 730EA.

My Compaq Mini 730EA came with Wins XP and I have just upgraded to Wins 7 Ultimate 32 bit. My Mic is not working with Windows 7, but it can play sound. When I roll back to Windows XP the mic works, but does not with Wins 7.
Where can I get the appropriate driver for the mic, please. Not driver? Then What should I do?
Thanks much in anticipation.

Since there isn't a driver to download the only thing you can possible do is delete the windows driver that the notebooks installs for the feature.
This is what it will look like.
Go under Human Interface Devices and delete every USB INPUT DEVICE.
Then restart the notebook and it should install the drivers back.
Also, you can follow this document. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01926155&tmp_task=solveCategory&cc=us&dlc=en&lc...
THX

Best LED TV to be used as monitor for Mac Mini (Late 2012 model)

Hi All,
I am having a mac mini (late 2012 model). Now, I am planning to buy a HD LED Tv from my home. So I would like to know which one will be best suited to be used as a monitor for mac mini so that I can buy a TV which will be used as both TV and Monitor
--jR

You'll want something that's 1080p. Best to have one with HDMI input, too. Other than that, let price and warranty be your guide.

How to Reinstall Windows XP on Compaq Mini CQ10?

Hi,
I've lost all data on my Compaq Mini CQ10-110SL. I need reinstall Windows XP Home but I'havent original installation CD and the CQ10 has not a recovy hidden partition. How restore windows xp? If i uses another windows cd and use the registration key under the laptop , the windows registration don't work!
Thank you in advance
Stefano

Call HP and order Recovery kit of your Notebook which would have OS and factory shipped software which went with the notebook. You will get recovery kit for a nominal charge of 15$-25$ depending on type of shipping
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Use of perfirals with Mac Mini 2009 Late model

Why the connector of my Mac iSight camera doesn't fit into the port of my Mini late 2009 model with the same ID marker "Y"?

Something is wrongs. I have physically connected my iSight camera to my late 209 Mac Mini with no problems.
However, with Mavericks the iSight camera would not work from me and for others too. I have not tried with Yosemite since I gave away that Mini before Yosemite was released.
For your case can you take and post here photos of both the connector on the mac you are using and the plug-end of the cable.

Compaq Mini CQ10-101SA Windows XP - Unable to view entire software or webpages in a window

Hi all!
We have a Compaq Mini CQ10-101SA which is running Windows XP. We have an issue with the display on certain webpages and software whereby you cannot see the entire page in the window. While this has been somewhat "inconvenient" when viewing webpages, it has now become a problem as we cannot use an important software package that we have installed.
Attached is a screen shot of the software in question - Hogia Smart Kassa (a point of sale till system). The bottom third of the page is missing, and you cannot scroll down to see it. This is a problem as it is where the "pay now" button is!
I have tried different screen resolution settings, DPI settings, and screen appearance settings in the "Display" area of the control pannel but nothing stops this from happening. Is there a "shrink to fit" button that will show the entire page on the screen in a smaller size? Can anyone help?!
Many thanks,
Ashley

Good Morning @AshleyElliott ,
It is a fantastic place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your retail software displays to large on the screen. If there is a way to set a screen setting for a particular program you would need to check with the manufacture for that setting.
In the meantime you can try this as a work around. Once you have the pay window launched if you press and hold the CTRL and press the minus sign it will make the screen smaller. To enlarge it you would press and hold CTRL and press the + sign.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Compaq Mini 731ET Bilgisayar bios password recovery.

Compaq Mini 731ET Bilgisayar
win xp profesional
bios password recovery error code : CNU917049D
Please help....
THANK YOU....
This question was solved.
View Solution.

Neamsy try.
e9lo3o74ha
3rd letter lowercase L.
4th letter lowercase O.
6th letter lowercase O.
Use that code to go into the BIOS.
Disable all passwords that are enabled.
If asked for the CURRENT password use that code.
If asked for NEW password just hit enter.
If asked to VERIFY password just hit enter.
Save and exit.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

- Compaq Mini c110 , cnu9300dcp , model 110c - 1010sa

Similar Messages

Maybe you are looking for