Compaq nx7000 problem

Hey guys, I have a problem which has been causing me a major headache. I borrowed this laptop of my friend and when I first had it, it worked like a total gem. Then one day after carrying it home (I'm always very careful with it) it wouldn't boot into windows and kept giving me error messages such as "non-system disk" and "fixed disk or bios error" at startup, sometimes I couldn't even load the bios setup. So after a lot of time I managed to get it to finally boot, and then it worked fine for a few more weeks until I moved it again and then there was a blue screen and the same problem.
I again managed to get into windows, but noticed that the sound and video became very glitchy and the computer was much slower. I took it to a shop and they tested the hard-disk and the motherboard. They found no problems but told me that I had to flash the bios and reinstall windows.
I've done this... flashed the bios through windows with the latest version, completely formatted the hard-drive and performed a clean windows install and then reinstalled all of the drivers. It is much faster but my sound is still a bit choppy and so is the video, especially when multitasking. Why is this? I have just performed a HDD Self Test through the bios and found no problems. I don't want to pay again to take it back to a shop because I think it was a waste of money.
Any ideas? I was thinking that perhaps the connection between the HD and the motherboard is a bit dodgy but the shop removed it, tested it on another system, had no problems and then replaced it.
Any advice will be welcome as I want this thing running better than it was before!
Many thanks.

Hi,
Those machines are more than 3 years old. How can you get warranty for it ? For the OP, please do not waste your money to repair it, you will be getting nowhere. New machines are very cheap now, not like 4 years ago. Just save money to buy a new machine.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Compaq presario problems with vista

Hello, I am having major problems with our compaq presario sr5233wn desktop, os windows vista home premium. It started shutting down about ten days ago randomly, then started with a blue screenthat has displayed different messages... I have completed 6 different restore points and this didn't work... I then backed up my personal files and performed a complete system recovery installed on the pc...it worked great for about half an hour then the freaded blue screen popped up and I had to shut it down...i did this three times to no avail...then I did a complete recovery from the two discs I made shortly after purchase...that has not worked either...does anyone out there have a fix for this..I need my ole puter.
Thanks Elmer

Hi Elmer,
Sounds like the first thing you need to do is test for a hardware failure. Check out Testing for Hardware Problems Using Hardware Diagnostic Tools (Windows Vista) and since it sounds like you are having problems running Windows for very long, skip to the bottom to the section called Using Hardware Diagnostic Tools when Windows does not open. Run the tests and report back what you find, if anything fails then there is probably a hardware component that needs replaced, possible culprits include the memory or the hard drive based on the symptoms you are describing. If everything passes, post that back as well, and let us know, and we can look for other causes of your problems.
Good Luck!
R
Although I am an HP Employee, I am speaking for myself and not for HP.

Compaq cq50 problems (solved)

Hi All,
I picked up my new laptop today a compaq cq50.
So far i've not been able to get a single linux disk to work on this machine 32bit or 64
i keep getting machine check exception errors that google reveals is something todo with slightly older kernels.
i have an old install disk that i can get to boot upto the udev section but once it tries to load the ath_pci modules bums out.
so far i have tried the command line brokenmodules=ath5k,ath_pci,ath_hal and still had no luck stopping udev from loading this module.
Any suggestions ?
Thanks
Matthew
Last edited by genisis300 (2008-10-28 18:21:21)

Just incase anyone else runs into this problem. I made a new install disk using the Larch scripts (very easy to use btw)
with a newer kernel and the archinstall scripts from core.
Worked a charm. Laptop is now running arch and i no longer have nightmares about windows Vista

COMPAQ NC6000- PROBLEM FREEZING

MY Compaq NC6000 Pen 4 1.6 GHz 512 MB. when windows is set to the right time and date system freezes. ( all system is new install os-XP-pro) think is bios issue. another problem hp doesnt have an update for this system.QQ. but when system is not set to proprer time and date system runs fine. turns on and off fine. all systems are good( in divice manager).

Hi:
Here are all the BIOS release notes for the nc6000. None address a freezing issue when the date and time is correctly set.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&...
Are you are aware of a system board problem that develops in many of the nc6000's over time?
See this post. That power chip could be starting to go out on you.
http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-Compaq-Slate/nc6000-no-startup/m-p/943898#M135735
Eventually your notebook will just shut down on its own. The way to test for a bad solder connection is to press down on the silver paneal above the F10-F11 keys. If your notebook unfreezes it won't be long before it is not going to work at all.
Paul

Compaq nx7300 problem

I changed the motherboard on my compaq nx7300 and every time i boot the system the 163 time not set error appears, and after that nothing happens .. it won't boot from anything (DVD or HDD)... the screen just stays partially lit. Can someone help me ?
Thank you

Even I have the same Problem. My Compaq NX 7300 does not boot, keyboards does not work in bios mode, cursor keeps on blinking in black screen, does not boot up with dvd or cd. I had win 8 installed in the system and all of a sudden this problem occured. I think it might be a Motherboard problem. Any suggestions guys to troubleshoot this problem??

Compaq 100b problems

Hi, i have a Compaq 100b small form factor pc, that i bought in the beginning of October, about a week after i bought it, it started freezing and having trouble turning on, so i contacted HP and i was told to download a driver and it didn't work. When i turn the computer on it almost always beeps 5 times with the orange light and the only way to make that stop is to hold the power button down, or unplug it, i usually have to do this multiple times, and about twice a week this requires a system recovery. Then once i finally get it turned on, i freezes frequently was a square of static around the cursor and must be forcefully shut down. Open to any suggestions.

Hi:
Normally if you are getting 5 beeps it means you have a memory problem (hardware).
I recommend you go into the BIOS and run the memory diagnostics test. If it fails, you then need to isolate the problem to the bad chip.
The only way to do that is to remove each memory module until the PC runs normally. Then you know what module is bad.
Then seek a replacement module under your warranty if your PC is under warranty, or from the memory manufacturer directly if the PC is no longer under warranty. Most memory has a lifetime warranty.
Below is the link to the service manual for your PC:
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02845296/c02845296.pdf
Paul

Compaq 3611AU Problem

Hi All,
First of all let me tell you I am a very very happy customer of HP till date. I'm using Compaq 3611AU since over 4 years. It just started a giving problem of audio detection since last 2 months. Some times it detects and sometimes it doesn't. So initial investigation from HP Forum and some of my vendors that this models has nVidia chipset problems and once it starts it would spoil display, keyboards, gradually. I can't afford to buy new laptop at this moment. So my question to hardware experts of HP as following:
1. Is it advisable to repair nVidia chipset of this model i.e. Compaq 3611au and one of my vendor told that it has cross chipset (I understand the chipset but don't know what he was talking about cross chipset) and success ration of replacing chipset is just 40%. So I want to ask HP guys is he right? Can anyone tell me that if I spend money on repairing chipset would it be worth or it would start creating problems after some months?
2. Is it possible replace whole motherboard? If yes, then what would be best suitable for this model Compaq 3611AU? Also is any idea how it would cost in INR?
Thank you..
Viresh

Hi,
Those machines are more than 3 years old. How can you get warranty for it ? For the OP, please do not waste your money to repair it, you will be getting nowhere. New machines are very cheap now, not like 4 years ago. Just save money to buy a new machine.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Compaq CQ61 problem with external speaker.

Hi,
I have this problem with playing music from my laptop through an amplifier to some discotheque speakers.
The balance changes so that the left speaker is playing much more than the right, and after a while the sound
turns into almost plain distortion. I have my laptop connected with a common jackstick with a left and right to the amplifier.
I wonder if anyone could find a solution to my problem..
I have had the amplifier checked, and the cable, but there shouldn't be any problems with those.
Jesper

i don't know that i would call it "common," but i have seen a few complaints about it. again though, it hasn't been a complaint i've seen often. i do think it's a cheap speaker. mine is nearly a year old and has not blown.....but i was never impressed with it.

Compaq CQ50-110US notebook

Laptop issue.
So the other day I was on my laptop and the grpahics of a game become a little buggy. I found it to be a little odd, but was thinking it was acting slow due to low memory.
So, I decided to restart the computer. I logged out of the game, and did the standard restart through windows and it got to the compaq splash art and stopped. It did not load windows and about 1 min after sitting on splash screen the screen went black except for a blinking cursor at the top left.
This concerned me because I also keep alot of information on my laptop for job use. I decided to try and do a repair by doing F11 which is supposed to fix windows, thinking it was a windows error. F11 does nothing.
I can hit all the other options from F-keys and they work but F11 is a no go.
My laptop does not beep on start up and I was told by a friend that if it did then it was the HD that went bad, but nothing.
I really cant take it to a shop because lack of funds at the moment and I would really like to be able to keep the info on my HD, but i need a working computer.
I started looking up the compaq CQ50 problems and fixes and go figure aside from the over heating issues that I have had to deal with, which when i first noticed it, I went about doing everything i could to keep it cool.
Now apparently I have been made aware of just how many issues people have with this laptop and needless to say, i regret buying an HP product.
It is out of warranty and I do not have a boot disk, because they do not ship them with the computers anymore.
Which i was hoping to try and see if it worked.
Would anyone by chance know the issue and possibly help me fix it?
Thanks

Hello cobradriver99,
Take a look at this document to begin, and let me know if the troubleshooting steps help to resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

4010ca usb device unknown

I have a compaq R4000 tag #4010ca I reloaded win xp and my when installing mouse or any usb device i get usb unknown downloaded the driver from compaq and problem is till there can anyone help.Thanks

Drivers for the Blackberry: Not quite sure how to check this. When I plug the phone into the computer, it does not recognize it. When I go to the device manager, it comes up in the USB portion as "Unknown Device". I've tried updating the driver by pointing it to the USB driver folder in the commons files section, but it won't take.
The phone has been recognized previous for about a day, so I don't think it's firewall/security related, as nothing has changed in that realm.
The device is not in mass storage mode.
I have not tried another computer, but I have tried two completely different Tours, as my carrier was willing to replace the unit. Neither works, and this to me makes it seem obvious that it is the computer, not the phone. I've also tried multiple USB cables.

Mexico City not included in Yahoo Weather?

I can find Stockholm and Helsinki in the Weather Widget but not Mexico City! Can someone (Yahooer) please update the global list of main capitals:)
/Esa
HP Compaq NX7000 Windows XP Pro

Just type in Mexico and tap Search. Mexico City should be at the bottom of the list.

Problem to get 3d work on HP Compaq Business Desktop dx2000

I bought a brand new HP with linux - mandrake - a month ago. I installed mandrake but then I got so confused that I through it all away and started on again with Archlinux that I have become used to.
Everything (well, of course not everything but most :? ) works all right but a few things doesn't.
First I couldn't get CUPS to work properly but that I solved - but don't ask me how. I think I did the same things over 5 times and then suddenly it worked as it should.
Then I had problems with the sound - but that worsk now after following the wiki.
Then I had problems with playing CD and DVD but that I managed to get to work.
But now I am stuck.
The 3d doesn't work. I tried to install all 3d modules I could find in arch but no result. I tried through hwd -e and lokalsed the modules named there with no result. I even tried NVIDIA (the computer have a intel graphics on board and no Nvidia-card) with the result that now the CD can't play sound-CD and the DVD doesn't work for multimedia despite newest xine and mplayer, koffeine etc I installed.
So I have 3 major problems:
1) the 3d card I want to start working
2) the CD-rom should be able to play sound-CD
3) the DVD should be able to play dvd-films.
Some hard-data:
HP Compaq Business Desktop dx2000
Intel celeron with MMX technology 2.6 Ghz and 400 Mhz system bus
Integrated ADI AD1888 Audio
Integrated Intel extreme Graphics 2 with GDI/GDI+ and Direct Show controller
Graphics memory 16 Mb + extra through Intel Dynamic Video Memory. Complete OpenGL 1.3 support.
2 DVD-drives installed Toshiba Samsung
Any one that could giv me a hint on how to start the solving of this?

These modules I have loaded:
% lsmod
odule Size Used by
dummy 3460 0
ehci_hcd 35332 0
i810 86420 0
snd_pcm_oss 56612 0
snd_mixer_oss 21120 1 snd_pcm_oss
snd_intel8x0 34336 1
snd_ac97_codec 78176 1 snd_intel8x0
snd_pcm 101252 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 27140 1 snd_pcm
snd 59108 8 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 10848 1 snd
snd_page_alloc 10244 2 snd_intel8x0,snd_pcm
parport_pc 28996 1
lp 12296 0
parport 38600 2 parport_pc,lp
usb_storage 71232 0
uhci_hcd 34576 0
eepro100 30988 0
e100 36992 0
mii 5760 2 eepro100,e100
usbserial 31336 0
usbcore 125560 5 ehci_hcd,usb_storage,uhci_hcd,usbserial
when I try hwd -e this results come:
% hwd -e
HARDWARE DETECT ver 4.1.2
Starting... (expert mode)
Detecting pci, usb, and pcmcia devices.
PCI DEVICE
VendID DevID Module Description
8086 1050 "e100" "Intel Corp.|82801EB (ICH5) PRO/100 VE Ethernet Controller"
8086 1229 8086 1050 "eepro100" "Intel Corp.|EtherExpress PRO/100 S Server Adapter"
8086 244e "hw_random" "Intel Corp.|82820 815e (Camino 2) Chipset PCI"
8086 24d0 "i810-tco" "Intel Corp.|82801EB ISA Bridge (LPC)"
8086 24d2 "usb-uhci" "Intel Corp.|USB Controller"
8086 24d3 "i2c-i801" "Intel Corp.|82801EB SMBus"
8086 24d4 "usb-uhci" "Intel Corp.|USB Controller"
8086 24d5 "snd-intel8x0" "Intel Corp.|82801EB AC'97 Audio"
8086 24d7 "usb-uhci" "Intel Corp.|USB Controller"
8086 24db "ata_piix" "Intel Corp.|82801EB ICH5 IDE"
8086 24dd "ehci-hcd" "Intel Corp.|USB Enhanced Controller"
8086 24de "unknown" "Intel Corp.|82801EB USB EHCI Controller #2"
8086 2570 "intel-agp" "Intel Corp.|82865G [Springdale-G] Chipset HostBridge"
8086 2572 "Card:Intel 865" "Intel Corp.|865 Chipset Graphics Controller"
PCMCIA DEVICE
no pcmcia driver in /proc/devices
VendID DevID Module Description
USB DEVICE
VendID DevID Module Description
Press any key to continue...
HD PARITIONS
/dev/hda /dev/hda1 /dev/hda2 /dev/hda3 /dev/hdc /dev/hdd
MODULES
dummy ehci_hcd i810 snd_pcm_oss snd_mixer_oss snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd soundcore snd_page_alloc parport_pc lp parport usb_storage uhci_hcd eepro100 e100 mii usbserial usbcore
INFORMATION
hwd -s - generates howto and sample X configure.
% hwd - s
HARDWARE DETECT ver 4.1.2
Starting... : (simple mode)
Kernel : 2.6.10-ARCH
CPU & Cache: Processor 0 is Intel(R) Celeron(R) CPU 2.53GHz 2534MHz, 256 KB Cache
ALSA(sound): Intel Corp.|82801EB AC'97 Audio module: snd-intel8x0
Video : Intel Corp.|865 Chipset Graphics Controller server: Xorg (i810)
Monitor : MAX1b6c H:28.0-96.0kHz V:50.0-75.0Hz
Mouse : Generic PS/2 Wheel Mouse device: /dev/psaux
Hard Disk : SAMSUNG SP0411N device: /dev/hda
SCSI : No scsi disk
Swap : Swap found device: /dev/hda2
Scanner : No scanner
CDROM 1 : TSSTcorpDVD-ROM TS-H352A device: /dev/hdc
CDROM 2 : TSSTcorpDVD-ROM TS-H352A device: /dev/hdd
Floppy : 3.5 1.44MB floppy drive device: /dev/fd0
USB : USB found module: ehci-hcd
Ethernet : Intel Corp.|82801EB (ICH5) PRO/100 VE Ethernet Controller module: e100 device: eth0
PCMCIA : Detect PCMCIA cards run hwd -d
Modem : No pci modem
Howto : View howto run hwd -h
Testing : File /etc/X11/xorg.conf already exist!!
: Read more in howto.
in hwd - h the following part is about monitor:
XWindows:
Video Card : Intel Corp.|865 Chipset Graphics Controller
Monitor : MAX1b6c
H kHz : 28.0-96.0
V Hz : 50.0-75.0
Xserver : Xorg
Xmodule : i810
Mouse : Generic PS/2 Wheel Mouse at /dev/psaux module: msintellips
/2
anyone that can help me on?

HP COMPAQ CQ42 258VX Display problem

Model type : CQ42 258VX
PROC : INTEL i5 - 450 2.4Ghz
RAM : 2GB DDR3
HDD : 500GB
VGA GRAPHICS : ATI Mobility radeon HD5430 - 512MB
I have a Compaq notebook CQ42-258VX, recently i must format and reinstall with windows 7 32 bit. The following issues occured when i tried to install my vga driver. I.ll try to describe it step by step.. case by case
1. Install VGA Graphics adapter, I use the driver Radeon HD5430 code "SP48280"
from http://support.hp.com/us-en/product/Compaq-Presario-CQ42-200-Notebook-PC-series/4150021/model/427628...
2. Restart the computer --> Blue Screen..!! ( message displays trouble with "atikmpag.sys" )
3. Restart the computer again ---> entering safe mode. Works fine.
Go to computer properties --> device manager --> Graphics adapter displays--> rollback driver ---> reboot computer
4. The display computer works fine. Running with the standard display adapter from windows.
I tried again with alternative display adapter, this time i use the Driver Radeon HD5430 code "SP47202"
5. Restart the computer --> Blue Screen..!! ( message displays trouble with "atikmdag.sys" )
6. I tried again with alternative display adapter.
Currently i have try to use the Driver Radeon HD5430 code "SP47202" / "SP48280" / "SP51092" and driver from AMD Support : http://support.amd.com/en-us/download/mobile?os=Windows%207%20-%2032
7. Still the results is the same.... Blue Screen..!! ( message displays trouble with "atikmpag.sys" or "atikmpag.sys)
Summarize : The computer graphics works fine when using standard windows adapter. But, when using the graphics adapter driver (ATI Radeon HD5430) it's crash...
Needs help with this issue....
Many thanks for the answer and solutions regarding my notebook graphics adapter trouble.
Thanks and Best Regards
-John-

Unfortunately the product is out of warranty
I also tried a several steps below :
1. Install different kind of OS, i have Windows 7 32-bit Home Premium, Professional, Ultimate
2. Update BIOS from Version F.17 to F.24
3. Install latest INTEL chipset utility drivers.
sp49523 Version 9.1.1.1025 Rev. A
4.Reinstall the ATI Graphics Driver -
sp48280 Version 8.711.0.0 Rev. A
All the drivers i downloaded from the official HP Support
http://support.hp.com/id-en/product/Compaq-Presario-CQ42-200-Notebook-PC-series/4150021/model/427628...
5. Install Display Driver - AMD ATI 13.9 Driver for Windows 7 32 bit :
http://www.techpowerup.com/downloads/2268/amd-catalyst-13-9-software-suite-vista-7-32-bit/mirrors
6. Restart the system --> Blue screen and Restart (still with the ATIKMPAG.sys problem)
7. Remove all traces of recent current display driver, CCC etc with AMD Uninstall Utility or DDU - Display Driver Uninstaller. ( in the safe mode, since the BSOD prevent to entering windonws in the normal mode )
8. Re-Install the display drivers
for step 7 & 8 i repeat and roll it over and over again, and i tried several ATI Display Adapter such as :
- Default Radeon HD5430 Driver for CQ42 258VX "SP48280" from the official HP Support
http://support.hp.com/id-en/product/Compaq-Presario-CQ42-200-Notebook-PC-series/4150021/model/427628...
- AMD Catalyst 13.9 driver 32 bit
http://www.techpowerup.com/downloads/2268/amd-catalyst-13-9-software-suite-vista-7-32-bit/mirrors
- AMD Catalyst 14.12 Omega Win 7 32 bit
http://www.techpowerup.com/downloads/2441/amd-catalyst-14-12-omega-win-7-32-bit/
9. Go to the ATI.com. Auto update Graphics Drivers.
Unfortunately The results is still the same... Blue Screen comes up and restart ( Problems with"atikmpag.sys" )
I also tried to delete the file "atikmpag.sys". The results is computer running with standard windows graphics driver.
I do some Harddisk Test, Memory Test.. all perform well.
Running with standard display graphics adapter from windows 7 all fine.. no blank screen, no white screen, no stripes.
Any idea to solve this issues ?
Thanks and Regards

Installation problems in Compaq Presario V2617LA Laptop

Hello,
I am new in all of this Unix-Linux world and I need some help, here's my problem:
I have already partitioned and prepared my HDD to install Solaris, Windows and maybe Fedora (if someone recommends a better Linux it'll be appreciated), all of those three partitions perfectly identified and ready for the OS (it happens that I learn quickly, but I'm still new on this). I perfectly pass all Solaris 10 11/06 installation windows and requirements and Solaris begins installation, BUT when it all looks great, the installation (progress bar) just stops moving having 209.29 MBytes remaining and installing the 'Solstice Enterprise Agents 1.0.3 files for root file system', the wierdest thing is that the little slash-dash at the end is still turning around, the working processor light is on and nothing freezes (except when I navigate through the menu options), I have waited for a whole day and the installation does not finish and even re-downloaded Solaris and burn the image again two times and nothing.
Could it be a hardware compatibility problem? What do you think?
My Laptop specs are the following:
Product Name      Compaq Presario V2617LA
Product Number      EW998LA#ABM (Spanish version)
Microprocessor      1.8 GHz Mobile AMD Sempron� Processor 3000+ with PowerNow!� Technology
Microprocessor Cache      128KB L2 Cache
Memory      512 MB 333 MHz DDR Dimm 2
Video Graphics      ATI RADEON XPRESS 200M IGP
Video Memory      128MB DDR (shared)
Hard Drive      60 GB 4200RPM
Multimedia Drive      DVD�R/RW and CD-RW Combo Drive with Double Layer support
Display      14.0� WXGA High-Definition BrightView Widescreen Display (1280 x 768)
Fax/Modem      High speed 56K modem
Network Card      10/100BASE-T Ethernet LAN (RJ-45 connector)
Wireless Connectivity      54g� 802.11b/g WLAN with 125HSM SpeedBooster support
Sound      Internal Speakers
Keyboard      101 key compatible
Pointing Device      Touch Pad with On/Off button and dedicated vertical and horizontal Scroll Up/Down pad
PC Card Slots
* 1 Type I/II 32-bit card bus (also support 16-bit)
External Ports
* 2 USB 2.0
* 1 VGA (15-pin)
* 1 RJ -11
* 1 RJ -45 (LAN)
* 1 headphone-out
* 1 microphone-in
* TV-Out (S-video)
Power
* 65W AC adapter
* 6-Cell Lithium-Ion (43Whr)
Thank you in advance!!

I `m sure that i completely uninstall it from the 1st laptop..
I don`t want to sight out from my desktop,the 1st laptop is in an...other country. [of course a friend of mine have it]
I mail to him to try to uninstall any files or something from there..
if i solve the problem i install to 2nd laptop

\problems with a compaq presario sr1603wm

troubleshoot problems with a compaq presario sr1603wm
whenever i turn on the computer the mouse, keyboard, and the monitor doesnt turn on. but the weird part is that when i use the 2-port usb KWM switch and switch them over to my other pc unit they work just fine. to make things worse my external hard drive, and the net card are showing that they have power going through them. im totatally lost cause i cant even get into dos, bios, or the start up screen. other monitors, keyboards, mouses dont work either. can you help me

i`ve narrowed down to1 thing wich may overheats my laptop:
The video card NVIDIA GeForce G103M might be the problem. i hear it has a kind of organic material , like glue, or other things wich keeps it togheter. this organic materials are not ment to resist to heat, wich makes them weaker. The temperature rises very quick, and the laptop performace goes down, when i start games or other video applications. so it must be the NVIDIA GeForce G103M. still whaiting for advice, or an ideea. thanks.

Compaq nx7000 problem

Similar Messages

Maybe you are looking for