Compaq Presario CQ56-112NR Quick Launch Buttons

I have a Compaq Presario CQ56-112NR, and I want to reprogram the quick launch buttons in Windows 7
Is there a program from HP to reprogram these buttons?

Hi,
Enter: 75138004
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Compaq presario cq56 keybaord problems (win7 x64)

Hi. i got a presario cq56, and the keyboard isnt working. no keys work. the caps lock light doesnt light up when you press the button. its almost as if the keyboard is dead but im pretty sure the keyboard is perfectly fine. i tried taking apart the laptop and reconnecting the keyboard but it still doesnt work. help?? please??

Hi Kline9000,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your Compaq Presario CQ56 Notebook and keyboard issues. Here is a link to uninstall the keyboard. Restart the computer after uninstalling, it should reinstall automatically.
Let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Compaq Presario CQ56-115DX Problems

Hello,
I have a Compaq Presario CQ56-115DX Laptop. It is still under warranty. Within the last week the power of the laptop has been messed up. When I have the laptop unplugged, which I don't very often, the laptop shuts down after an hour without any warning. So I plug back in the laptop and it still shows anywhere for 40-70 percent battery left. Why is it doing this?
Thanks

Hi,
First of all, shut down the notebook, unplug the AC Adapter, remove the battery, and then hold down the Power button for a full minute.
Now, plug in the AC Adapter without the battery inserted, start the notebook, open windows Control Panel, open Device Manager, expand the entry for Batteries, right click on and the Microsoft ACPI Compliant Control Method Battery and select Uninstall - do not uninstall anything else here. When the uninstall is complete, shut the notebook down, unplug the AC Adapter, re-insert the battery and then start the PC on just the battery. Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the PC again. Now plug in the AC Adapter ( with the battery still inserted ) and start the notebook to see if this has helped the issue at all.
If the above has not helped, download and run the stand-alone battery test utility available on the page below and see if this reports any problems with your battery.
http://h20239.www2.hp.com/techcenter/battery/battery_ts.htm
If this reports a problem with the battery ( or even if it doesn't, but the problem is still occuring ), contact HP and arrange to have the battery replaced/notebook repaired under warranty.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Compaq Presario CQ56-110US will not load up.

So.. the moment I press the power button, my Compaq Presario CQ56-110US notebook, will not load up. It only show the Compaq logo screen flashes black them shut down and restarts the process. It never makes it to the Windows login page.

Hey @rajpodn ,
Welcome to the HP Forums!
I understand you're looking for info on swapping out the CPU in your notebook.
You will find everything you need here: Compaq Presario CQ56 Notebook PC - Maintenance and Service Guide. The instructions you need start on page 75. Keep in mind that the CPU itself may not be the issue, it could be the socket on the motherboard preventing the notebook from reading the CPU, so even replacing the CPU may not work, as you may need a replacement motherboard. I do not suggest replacing the motherboard as doing so requires HP Proprietary software to reinstall the Service-ID necessary for reinstalling Windows.
*Caution - If you do install the new CPU be careful with the thermal paste. A small pea sized amount should be more than enough. Put the paste in the exact center and carefully spread so there is a fine layer almost to the edge of the CPU. Remember that the heatsink will press very firmly onto the CPU and spread the paste more and you don't want any squishing out as this can cause electrical shorts if the paste has a high metal content.
The part you will want is: AMD V140 processor (2.3 GHz, 512-MB, L2 cache, 1066 MHz, 3.2 GT/s)—singlecore 25 W. The part number for this is: 616333-001.
You can order the CPU directly from HP here: HP Part Surfer, but you may be able to find it cheaper on sites like eBay, Amazon, or Newegg.
Hopefully this covers everything you're after!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Quick launch buttons and touch functions not working post win7 upgrade

I have several problems that I think are related.
1) When I rotate the screen and then bring it close (as in flat) to the keyboard, the screen goes blank. There is no key combination I can find that restores the screen. Putting it back in notebook orientation doesn't do anything either. Only thing to do is a hard reboot.
2) the quick launch buttons on the screen edge are not functioning as follows:
a) the hp mediasmart button (the one with the wave) doesn't work
b) the screen rotation button produces the same problem as 1) above
c) the third button which looks like either gears or a sun (I don't know what it should do) brings up the windows mobility center, where I have found problem number:
3) On tablet PC settings, the display tab, there is one display: 1. mobile PC display
on the same tab, there is a setup button. The next screen says:
pen input
touch input
Regardless which one I select, on the following screen (where it says Press this screen with ....) when I press with either my finger or the pen, nothing happens. Which seems like either:
it thinks another screen is active or
the touch components are completely non functional.
4) Not surprising, the touch functions are completely non-functional
I have installed all of the drivers for this TX2-1025dx for Win7(64bit) per the HP support/drivers page.
Not all of them resulted in a clean install.
Here are other drivers that I had problems with (meaning that I got an error message, it failed, it had to be done more than once, something else broke, etc.)
AMD AHCI - started catalyst installer then failed
Authentic fingerprint driver - "dpinst64 not marked for installation"
Ntrig Duosense - had to do this one multiple times to get the fingerprint reader to work
HP Mediasmart MVP - hung in CMD
I have checked that all of the startup services are actually enabled in msconfig including quick launch buttons, hpwuschd, and media smart. Nothing is disabled in services.
I have reinstalled the quick launch buttons driver for this product from December 2009. (There is an earlier version from November.)
I installed the bios upgrade (before win7, actually) it is currently F.25
I have also eliminated EMF possibilities.
I have searched the forums, and while I have found some interesting clues, I don't see anything like this - at least with a solution.
Any assistance would be greatly appreciated as this thing is quite useless to me as it currently functions. It is not a tablet anymore.
TIA

[knock knock] Helloooooo??!!??
Installed 6.50.9.1, which is in between the last two quick launch button (QLB) drivers (that did not work). Also fixed the lightscribe and mediasmart DVD installs. Same problems, no touch or pen, and a new bug I discovered with qlb
First, if you search for tablet in the start menu, there is a selection to set the tablet buttons to perform certain tasks. When you run that, it says that teblet buttons are not installed on this pc. Doesn't matter if QLB is installed or not - same error. Hmmmmm. Check with your pc manufacturer..... I think I am doing that. I am starting to feel like I am working for HP.
Next finding: Using mobility center, I found that if you orient the screen to landscape for the slate config, and then rotate the screen, it does not go blank. However, if you rotate the screen back to notebook, it goes blank. And of course it keeps that upsidedown config when you reboot, too. So, the way to recover from that (because you really need a keyboard if you don't have a working pen and touch takes 30 sec to respond) is to keep trying to get touch to orient the screen back to landscape for notebook. Then rotate the screen to landscape for notebook. And uninstall the QLB driver that doesn't work and reboot. But after that, touch and pen did not function.
Since touch and pen had previously been restored when I uninstalled QLB, I reinstalled MVP and smartmenu coz they were the actions that I took the last time before touch and pen returned. Didn't work this time, tho.
I decided to do a system restore back at the point that I had used HP Advisor, since that was the last time I made note that pen and touch were working. Restore failed because a sfi.dat file was not found (and search didn't find it anywhere either). I tried 5 different restore points, before and after that one, and they all failed. But the first time around, I had touch on the logon screen, just not after windows started. The next time, I had touch but not pen. The next time, I had touch and pen, but only for a period of time (I think HP Advisor may have been the intervening event) before they stopped working.
Oh, and HP advisor does not appear to be actually installing the things on the action list. That could be an issue with Comodo, but it really looks more like an issue with that "mother may I" message from Windows asking for permission to run the program. Often as not, windows reports that the program is not responding. Closing the program with that dialog box actually gives it the kick in the knickers it needs to complete.
A not so great workaround is to use the mobility center to orient the screen when you want to put the thing in slate mode. You can pin it to the task bar (with a little fiddling). Touch is extremely slow to respond in slate mode. For example, it took about 3 minutes to get the screen oriented back around to notebook config, which is 4 "clicks" if things are working right. Pen works sort of OK (although I haven't tried any writing) . Gestures for scrolling do not work.
I am done with the troubleshooting until someone comes up with other targeted ideas.I have been keeping detailed chrono notes.
Again, I hope the information here leads to a solution. This unit is not a functional tablet and I don't want to stay with Vista, neither should I have to since this is supposed to be compatible.

HP CQ41-224 TX : HP Quick Launch Button did not funtion on Windows 7 Home Premium 64 bit

Hello,
I have bought a new notebook HP CQ41-224TX without OS (free dos) and upgrade the momory to 4 Gb.
I have installed this notebook with Windows 7 Home Premium 64 bit and all HP CQ41-224TX driver 64 Bit.
All function on this notebook running well accept Fn+F7 and Fn+F8 (for brightness) do not work.
I have reinstall the HP Quick Launch Button, but nothing changed.
Does Anyone has this problem.? and how to solve this problem.. pls let me konw. Thanks
Regards
Febrianr

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Sound quick launch button doesn't work when i installed windows 8 in my hp pavilion dv3z notebook

1. Product Name and Number
hp pavilion dv3z notebook pc
2. Operating System installed (if applicable)
windows 8
3. Any changes made to your system before the issue occurred
installed windows 8
when i installed windows 8 in my hp pavilion dv3z notebook pc, the quick launch button of volume is always red and the sound is mute....the driver for quick launch buttons and driver for sound is also up to date....can you please help me?
This question was solved.
View Solution.

When installing the audio driver, was it installed by following the prompts or in compatibility mode as outlined here?
Based on the Software and Drivers page for this unit, the unit was not tested and certified for Windows 8. This means that some functionality may not be the same since the unit was not designed for Windows 8. See this site for information and to find out if it has been tested for Windows 8.
If the sound driver has not been installed in compatibility mode, then I recommend using the Windows 7 64bit driver found here and using the linked steps above to install it in compatibility mode.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HP Quick Launch buttons incompatibility Windows 8.1 / Unable to Launch IE 11 and my yahoo home page

I have an HP Envy dv6 notebook PC Product # C2L31UA #ABA. I upgraded to Windows 8.1 several weeks ago and everything seemed to be working fine. About 3 weeks ago I started having problems with "internet Explorer stopped working" happening all the time. I also seem to have problems with installing updates from HP with failed updates then these problems start occuring. 4 days ago I was unable to launch IE 11 on my desktop or myyahoo home page. IE 11 is not working on my desktop or from the tile on Windows for Internet Explorer. I am able to use google and have been trying to search for solutions. I did find out from a scan that HP Quick Launch buttons are incompatible with Windows 8.1. I thouhgt this might be the problems. I have tried to remove it unsuccessfully. I have spent 4 days trying to fix my computer with no results. I thought I had uninstalled HP quick launch buttons late last night and I did briefly get my desktop to launch last night at 1 AM. However this morning It is not working again and the HP button is still on my computer. Not sure if this is what is causing all of these problems ? I also tried doing a system restore and it failed also. Can someone tell me what I should do? Thanks so much! I am not very computer savy so I am getting very frustrated.

Hello @luvpatch,
I understand that you are not able to use the HP Quick Launch buttons after upgrading to Windows 8.1, and I would be happy to assist you in this matter!
The first step I recommend is to completely remove HP Quick Launch from your system by using this Microsoft Fixit tool: Fix problems that programs cannot be installed or uninstalled. Once the program is removed, please restart your computer.
To further diagnose Internet Explorer on your system, I recommend following Resolving issues in Internet Explorer (Windows 8), as well as Troubleshooting Wireless Network and Internet (Windows 8). This should help to re-establish a consistent connection between your notebook and wireless network.
If the issue continues, I recommend performing a backup and refresh back to when Windows 8 was still installed on your system. To do this, I recommend following this resource on Backing Up Your Files (Windows 8), as well as Refresh Your PC to Resolve Problems (Windows 8).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Dv7-1130us - Quick Launch buttons not working - though they light up correctly

I'm trying to enable wifi, though the quick launch buttons are no longer working. They used to work, though I've had my laptop repaired at the service center (to replace the keyboard), and I also immediately upgraded to windows 7 once my laptop was returned.
I've done a hard reset, upgraded the bios, and upgraded the quick launch button drivers, though nothing is working. When windows boots, the wifi image on the quick launch bar transitions correctly as it has always done (blue to orange - since I had I usually had it disabled before I sent it in for repair and upgraded).
Is there a way I can enable the wifi card without having to use the quick launch buttons? The wifi card has always functioned correctly when it was enabled, and it's working properly according to the device manager. I just need to either find a way to enable it without using the quick action bar, or get the quick action bar working.
Any suggestions? I'd rather not send it back in for repair, it's a lengthy process.
This question was solved.
View Solution.

Uninstall the current HP Wireless Asistant and reboot.
Try installing newer version of HP Wireless Assistant sp49018.exe
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Faulty Quick Launch Buttons on my Pavilion dv9854ca notebook...

I recently had to reformat my laptop after the hard disk failed to boot properly, and I had to reinstall Windows, and all the drivers and software I used before. I installed the HP Quick Launch Buttons driver, and so far all of them (Play/Pause, Stop, Volume etc...I didn't install Quickplay because I don't need it) have been working properly except for the "mute" button, something I just noticed. Every time I tap it, it will toggle to the other setting for a millisecond then switch back to what it was before, i.e. if there is sound, and I want to mute sound, I tap the button, and it will flash orange (signalling mute) for a brief moment before going back to blue (signalling sound), and vice versa. Before I reformatted, if I wanted to mute or unmute, I tapped it and it would toggle to the other setting without switching back.
Has anyone ever experienced this problem or know how to deal with it? It's nothing major but is a bit of a pain to have to click the windows volume settings...
Thanks!

You need to install sound driver to fix the mute issue.
Which OS are you using? if it is vista you can find it here
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

DV7-1279WM microphone and quick launch buttons stopped working

For some reason my quick launch buttons and microphone have stopped working on my DV7 laptop. I know that I recently used the microphone on a Skype call, but believe since that time that Vista SP2 was installed. I am not sure when the quick launch buttons were not working, but have just literally (talking less than a week ago) got the laptop back from HP for a warranty issue with the display. A strange thing I noticed is that if i look under the settings in Skype, the microphone will record a level for a split second, but then go back to nothing again (someone I was trying to talk to said they could hear me for a second).
I thought it might be the same problems as in the 35 page thread on here, but I have sound, its only the microphone and quick launch buttons that are not working. So far I have rolled back, installed and updated sound drivers, BIOS and Quick Launch software, but no luck.
Any suggestions? Thanks.

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly. Try performing a hard reset first, if it doesn't work then we'll move to the next step.
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

Quick Launch buttons not working on Window 8.1

I have installed window 8.1 but quick launch buttons, which used to work with combination of FN key, for example fn+F3 key for brightness, fn+F8 for volume, fn+F6 key to lock the computer etc are not working. What is the solution?

Farhan_Raza
I have available a pretty extensive list and I cannot find a Quick Launch Driver for Windows 8.1. Might be one; I don't see it.
I use a completely different arrangement of Custom Toolbars from what most people use so I am not at all sure what constitutes a Quick Launch.
I did find the following that may be close to what you seek:
How to enable Quick Launch in Windows 8.1
=========================================================================
Possible Option - HP Launch Box Manager
Windows 8.1 provides the following -- this program MIGHT install on your computer and it might run on your computer. It is not rated for your system. You may try it if you like. Windows will tell you if the program is not appropriate for your system.
For Windows 8.1, you might be able to use the HP Launch Box Manager:
Close running programs, browsers, and games
Next:
Create a Restore Point:
Create a Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
Download / Save:
sp63808 HP Launch Box V1.1.5
Double Click or Right-Click on the file and install as Admin...
The application installs in seconds and then disappears.
Windows key (opens the Start Screen) > type anywhere, the word: Launch Box >
Click to start the Launch Box Manager
The Launch Box Manager will start on your Desktop and offer a list of available applications from which you can choose eight applications for your Launch Box menu.
Once set up, the Launch Box Manager sits in your Task Bar.
Right-Click to Edit the Manager OR Left Click to Open and access the items in your Application List.
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Compaq presario cq56 fan stop working

compaq presario cq56 stop working though the system is still working fine to some extentd

does that mean i have 2 replace the fan

Hp quick launch buttons for HP dv2740se in Windows 7(64bit) Ultimate

I already use hp quick launch buttons for vista(64bit).
but it is not a work.

@ciscruz
Hi,Write down Your p/n number which is under Your computer and looks like this.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Reg: Quick Launch buttons on HP pavilion dv4 laoptop

Hi, I am having HP Pavilion dv4 laptop, today all of a sudden my quick launch buttons are not working. I installed new version of quick launch buttons drivers. But it doesn't worked. The wireless, quick play, audio buttons are not working.
While i pressed Fn+F5 , laptop was hibernated, and I activated then the wireless button turned into blue but there is no internet connection of wireless.
What would be the problem... ?
need help

Hi,
Uninstall this version of HP Quick Lunch Buttons which You have installed and try this one here .
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Compaq Presario CQ56-112NR Quick Launch Buttons

Similar Messages

Maybe you are looking for