Compaq Presario CQ60-112LA: Problems with the wireless
Hello!!! :D:D:D:D
I send my greetings to the community.
I want to write 2 things before to tell you about my problem:
1. I'm sorry for my English, It isn't so good.
2. I'm Newbie in Arch Linux but not in GNU/Linux (I'm not an expert ) and I've read the wiki and Forum Etiquette (http://wiki.archlinux.org/index.php/Forum_Etiquette).
I installed Arch Linux in my laptop, it's a Compaq Presario CQ60-112LA and It had installed Madriva Linux but I wanted to have more control on my computer and I decided to install
I followed the wiki's instructions and I could install Arch Linux correctly but I have a problem. I can connect to Internet by wireless, I haven't got wired access and I followed this instructions:
(http://wiki.archlinux.org/index.php/Wir … _available)
I could bring up the interface
#ifconfig wlan0 up
#iwconfig wlan0 essid "BTHome..." key ABCDCD
dhcpcd wlan0
dhcpcd: version X.X.X starting (I don't remember the real version, In this moment I'm sending this post from Mandrivas' Livecd)
dhcpcd: wlan0: waiting for carrier
dhcpcd: timed out
I tried to connect manually with static ip but I couldn't. I don't know what can I do. I can't continue without Internet, because I can't update my system and I can't install Kde4 ..
I did this one:
#modprobe -r ath5k
modprobe ath_pci
But I didn't find any wireless interface, In Mandriva ath_pci works better than ath5k module, but I can't up ath_pci module..
Thank you very much for your help... And I apologized again for my english...
HI;
The easiest thing to do is to spray canned air into the vents by the fan and heat sink. If a lot of dust comes out, that will probably take care of the issue. If no dust comes out, then you have other issues causing overheating and thermal shutdown. Take care not to overspin the fan blades when you blow the air into it.
Paul
Similar Messages
-
Problem with the wireless speed on windows with bootcamp
I've got a problem with the following:
the wireless card of my mac pro is very slow when i run windows on my mac pro with bootcamp
When i just run OSX everything works fine, but in windows, when I connect to the wireless my wireless speed
drops to 11-18mbs.
First I thought that it was a drivers issue, but after the update of bootcamp drivers 1.4 the problem still exist.
First I had a Topcom wireless router now I've bought a Apple Airport Extreme, but the problem isn't solved yet...
The router isn't 2 meters away from my mac.
And the wireless speed is fine when i connect with my dads windows laptop...
Does anyone has a solution? using a cable isnt a solution for me because in September I will move with my mac pro one floor down.You might want to ask this in the Boot Camp forums. As your wireless work fine under Mac OS X it sounds to be a software issue as opposed to a hardware one which means as Windows users they'll better be able to help.
-
Enormous problems with the wireless keyboard
I have really big issues with the bluetooth slim keyboard from Apple. It is not working proberly with my MacBook Pro.
2 of 3 times when I press the Caps Look key, my keyboard says goodbye. The capslook LED display on the "real" keyboard gets green and so does the green light on the wireless. But from this moment on the connection is lost. I have to restart the computer to use the wireless keyboard again
I'm using no other bluetooth device (not that I'm aware of), only my Wacom tablet (usb cable of course).
I don't use the Capslook key in my workflow, but sometimes I accidentally press the key. Very frustating.
Someone else has this problem????Hi
GUI of these controller still not their best or reliable as well, so I always use CLI for the configuration. Make sure you use IOS-XE 3.6 to get whatever the GUI enhancement this product has.
If you looking for specific commands to configure a feature let us know, otherwise for general config below should helps you.
1. http://mrncciew.com/2013/09/29/getting-started-with-3850/
2. http://mrncciew.com/2013/12/04/wlan-config-in-3850-part-1/
3. http://mrncciew.com/2013/12/06/wlan-config-with-3850-part-2/
4. http://mrncciew.com/2013/12/14/3850ma-with-5760mc/
5. http://mrncciew.com/2014/08/05/client-details-in-converged-access/
HTH
Rasika
*** Pls rate all useful responses **** -
A problem with the wireless profile
[nikos@dell ~]$ sudo netctl stop Nexus
[nikos@dell ~]$ sudo netctl start Nexus
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
[nikos@dell ~]$ journalctl -xn
-- Logs begin at Sun 2014-08-24 18:22:31 EEST, end at Wed 2014-08-27 15:55:28 EEST. --
Aug 27 15:55:23 dell sudo[4263]: pam_unix(sudo:session): session closed for user root
Aug 27 15:55:28 dell sudo[4269]: nikos : TTY=pts/0 ; PWD=/home/nikos ; USER=root ; COMMAND=/usr/bin/netctl start Nexus
Aug 27 15:55:28 dell sudo[4269]: pam_unix(sudo:session): session opened for user root by nikos(uid=0)
Aug 27 15:55:28 dell systemd[1]: Starting Automatically generated profile by wifi-menu...
-- Subject: Unit [email protected] has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has begun starting up.
Aug 27 15:55:28 dell network[4275]: Starting network profile 'Nexus'...
Aug 27 15:55:28 dell network[4275]: The interface of network profile 'Nexus' is already up
Aug 27 15:55:28 dell systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
Aug 27 15:55:28 dell systemd[1]: Failed to start Automatically generated profile by wifi-menu.
-- Subject: Unit [email protected] has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has failed.
-- The result is failed.
Aug 27 15:55:28 dell systemd[1]: Unit [email protected] entered failed state.
Aug 27 15:55:28 dell sudo[4269]: pam_unix(sudo:session): session closed for user root
[nikos@dell ~]$ netctl list
* wlp2s0-Nexus
[nikos@dell ~]$ sudo ip link set down wlp2s0
[nikos@dell ~]$ sudo netctl start wlp2s0-Nexus
the above solved the problem but i dont understand why this probelem emerges after each reboot forcing me to regive these commands each time.
How can i entirely fix it and what is causing it?
and a 2nd issue is the 'pacman -Syy/u' fails each time to find a sinle one workin g mirror so i cannot update/upgradeChange your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting -
Problems with the wireless update v5.0.0.459 and SMS/BB Messenger
I love this phone, but ever since I did this update last night, all of my pictures are condensed. The thumbnails, when I click to view, everything. Every pic looks grainy and distorted. I took my card out and put it back into my 8330. Pictures were clear as day. Just got off the phone with Sprint Tech Support and they told me that this new update condenses all your pics to make room for memory for data and media usage. Does anyone have this same problem?
Also, everytime I receive a text (SMS) to a person that happens to be on my BBM list, it goes straight into my BBM. It doesn't list it as a SMS. Personally, I don't like using the BBM. Anyone having this problem too?
Any help would be appreciated. Thank you.Hello mosika20,
Welcome to the BlackBerry Support Community Forums.
To prevent SMS messages from going to BlackBerry Messenger Application you will need to unlink the contact association. Open the BlackBerry Messenger Application and close any active/old conversations. Highlight the contact that you would like to unlink and press the menu key and select Remove Contact Link. This will stop SMS messages from that contact to BlackBerry Messenger Application and they will show up in SMS inbox.
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
I'm having problems with the wireless LAN Guest and Windows 7
Only with Windows 7 when a user logs in in the Guest WLAN two connections appear in Windows 7, the user authenticates on the page but does not leave the internal network. Can someone help me with this?
We uses WLC 4400 and LAP 1252I have the same issue. Using webauth and Windows 7 and IE9 and windows 7 and firefox. Also MAC\Safari.
Client gets an IP address, accepts the certficate error message. But never gets to the webauth page.
I have a TAC open so will update when i get more info. -
Compaq presario cq60 210-us bios update failed
I tried to update the BIOS of my Compaq Presario CQ60-210US notebook using the driver downloaded from the HP Support website. The update failed, the computer locked up and would not take any input from the keyboard or the mousepad. I did a hard reset and now the notebook won't boot at all.
I tried following the steps to restore a corrupted BIOS (windows key + B + power for 3 seconds) several times but the notebook still will not boot.
There are instructions for using an HP_TOOLS USB drive to restore the BIOS, but I can't figure out how to create that USB drive. There are no links and no instructions to create it. When I search HP.com it takes me right back to the same page.
Help!See if someone will reprogram your bios here:
http://www.blackcatusb.net/
Maybe this may help too:
http://www.ehow.com/how_6323088_make-bootable-usb-key.html
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster. -
HP Compaq Presario CQ60-211DX Volume problem
Hello. My HP Compaq Presario CQ60-211DX laptop always automatically reduce the microphone's volume to 0 anytime i am making a phone call, and this alway affect the volume whereby the other person stops hearing me. Am running a windows vista home basic. Also my realtek high definition Audio disappeared, and now i have conexant high definition audio as my default audio driver. Please, anyone with useful solution should help me out. thank you.
Hi. I have the same problem. Have you been able to fix this?
-
all of a sudden, I do not have internet connectivity. Checked all network settings and TV recognizes that a wireless network is operational. the internet signal to my imac is fine. what does the rapid flashing APPLE TV box indicated other than that there is a problem ??
The flashing light is indicative of a problem with the unit. I would connect to iTunes to restore
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US -
When trying to install a wireless printer, the WEP password says its incorrect. Is this a problem with the airport, my Internet provider or HP? I know the password is correct.
Your AirPort Extreme supports WPA.
WEP is outdated and considered fairly useless, so use WPA.
Be sure you are using AirPort Utility 5.6. If you are not running Lion then use AirPort Utility 5.5.3.
AirPort Utility 6.0 cannot administer 802.11b/g base stations. -
[SOLVED] So many problems with the RTL8723au wireless card:
Hello,
I have been a long time linux user (Ubuntu & CentOS) and recently switched to Arch Linux. My laptop usually has strange issues with all sorts of stuff when it runs Linux like graphics cards, brightness control, and WiFi. So far I have been able to fix the first two on my own from the wiki.
In Ubuntu I was used to having to clone into https://github.com/lwfinger/rtl8723au and then making the driver. After a quick modprobe 8723au the wireless interface came up and was working perfectly with NetworkManager.
After doing the same thing with Arch, NetworkManager cannot connect to the internet, neither can Wicd which gets stuck at the Authentication step. I finally disabled both of these services and used wpa_supplicant to successfully connect but after a lot of errors. I am pretty sure something is wrong with the wireless driver, and not Wicd, NetworkManager, and wpa_supplicant at the same time.
There is no output from iw dev
'Not connected.' from iw dev wlp0s26u1u4i2 even though wpa_supplicant is connected to the internet.
Output of sudo wpa_supplicant -Dwext -iwlp0s26u1u4i2 -c./wpa_test :
(wpa_supplicant takes a good 3 minutes to connect)
Successfully initialized wpa_supplicant
ioctl[SIOCSIWAP]: Operation not permitted
ioctl[SIOCSIWENCODEEXT]: Invalid argument
ioctl[SIOCSIWENCODEEXT]: Invalid argument
wlp0s26u1u4i2: Trying to associate with 00:22:3f:84:59:74 (SSID='Eden' freq=2437 MHz)
wlp0s26u1u4i2: Association request to the driver failed
wlp0s26u1u4i2: Associated with 00:22:3f:84:59:74
wlp0s26u1u4i2: WPA: Key negotiation completed with 00:22:3f:84:59:74 [PTK=TKIP GTK=TKIP]
wlp0s26u1u4i2: CTRL-EVENT-CONNECTED - Connection to 00:22:3f:84:59:74 completed [id=0 id_str=]
wlp0s26u1u4i2: Trying to associate with 00:22:3f:84:59:74 (SSID='Eden' freq=2437 MHz)
wlp0s26u1u4i2: Association request to the driver failed
wlp0s26u1u4i2: CTRL-EVENT-DISCONNECTED bssid=00:22:3f:84:59:74 reason=0
wlp0s26u1u4i2: Associated with 00:22:3f:84:59:74
wlp0s26u1u4i2: CTRL-EVENT-EAP-STARTED EAP authentication started
EAP: buildIdentity: identity configuration was not available
wlp0s26u1u4i2: CTRL-REQ-IDENTITY-0:Identity needed for SSID Eden
wlp0s26u1u4i2: CTRL-EVENT-EAP-FAILURE EAP authentication failed
wlp0s26u1u4i2: Authentication with 00:22:3f:84:59:74 timed out.
ioctl[SIOCSIWAP]: Operation not permitted
wlp0s26u1u4i2: CTRL-EVENT-DISCONNECTED bssid=00:22:3f:84:59:74 reason=3 locally_generated=1
wlp0s26u1u4i2: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Eden" auth_failures=1 duration=10
wlp0s26u1u4i2: CTRL-EVENT-SSID-REENABLED id=0 ssid="Eden"
wlp0s26u1u4i2: Trying to associate with 00:22:3f:84:59:74 (SSID='Eden' freq=2437 MHz)
wlp0s26u1u4i2: Association request to the driver failed
wlp0s26u1u4i2: Associated with 00:22:3f:84:59:74
wlp0s26u1u4i2: CTRL-EVENT-DISCONNECTED bssid=00:22:3f:84:59:74 reason=0
wlp0s26u1u4i2: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
wlp0s26u1u4i2: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Eden" auth_failures=2 duration=20
wlp0s26u1u4i2: CTRL-EVENT-SSID-REENABLED id=0 ssid="Eden"
wlp0s26u1u4i2: Trying to associate with 00:22:3f:84:59:74 (SSID='Eden' freq=2437 MHz)
wlp0s26u1u4i2: Association request to the driver failed
wlp0s26u1u4i2: Associated with 00:22:3f:84:59:74
wlp0s26u1u4i2: WPA: Key negotiation completed with 00:22:3f:84:59:74 [PTK=TKIP GTK=TKIP]
wlp0s26u1u4i2: CTRL-EVENT-CONNECTED - Connection to 00:22:3f:84:59:74 completed
Output of dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.7-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Mar 24 20:06:08 CET 2014
[ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda2 video.use_native_backlight=1 rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c4daffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca7bf000-0x00000000caebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed98000-0x00000000fed9ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffcc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f5fffff] usable
[ 0.000000] e820: update [mem 0xc3dad018-0xc3dbd057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x00000000c3dad017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c3dad018-0x00000000c3dbd057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c3dbd058-0x00000000c4daffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ca7bf000-0x00000000caebefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed98000-0x00000000fed9ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffcc0000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000022f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0xcaffe000 ACPI 2.0=0xcaffe014 SMBIOS=0xcaebef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f61000) (15MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001f61000-0x0000000020000000) (480MB)
[ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040004000) (510MB)
[ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000040005000-0x000000007fcf8000) (1020MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000007fcf8000-0x0000000080000000) (3MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000080000000-0x00000000c31c0000) (1073MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000c31c0000-0x00000000c31e0000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000c31e0000-0x00000000c3dad000) (11MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x00000000c3dad000-0x00000000c3dbe000) (0MB)
[ 0.000000] efi: mem18: type=1, attr=0xf, range=[0x00000000c3dbe000-0x00000000c418a000) (3MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000c418a000-0x00000000c4db0000) (12MB)
[ 0.000000] efi: mem20: type=0, attr=0xf, range=[0x00000000c4db0000-0x00000000c61b0000) (20MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000c61b0000-0x00000000c61b8000) (0MB)
[ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000c61b8000-0x00000000c61bb000) (0MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000c61bb000-0x00000000c61bc000) (0MB)
[ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000c61bc000-0x00000000c61bd000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000c61bd000-0x00000000c61be000) (0MB)
[ 0.000000] efi: mem26: type=2, attr=0xf, range=[0x00000000c61be000-0x00000000c61bf000) (0MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000c61bf000-0x00000000c63a8000) (1MB)
[ 0.000000] efi: mem28: type=1, attr=0xf, range=[0x00000000c63a8000-0x00000000c63bf000) (0MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000c63bf000-0x00000000c7b67000) (23MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000c7b67000-0x00000000c864a000) (10MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000c864a000-0x00000000c864c000) (0MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000c864c000-0x00000000c864e000) (0MB)
[ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000c864e000-0x00000000c8650000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000c8650000-0x00000000c8697000) (0MB)
[ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000c8697000-0x00000000c8699000) (0MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000c8699000-0x00000000c86cb000) (0MB)
[ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000c86cb000-0x00000000c86cc000) (0MB)
[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000c86cc000-0x00000000c87ff000) (1MB)
[ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000c87ff000-0x00000000c8803000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000c8803000-0x00000000c8806000) (0MB)
[ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000c8806000-0x00000000c8807000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000c8807000-0x00000000c885a000) (0MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000c885a000-0x00000000c88b3000) (0MB)
[ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000c88b3000-0x00000000c8c65000) (3MB)
[ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000c8c65000-0x00000000c8c67000) (0MB)
[ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000c8c67000-0x00000000c8c78000) (0MB)
[ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000c8c78000-0x00000000c8c7c000) (0MB)
[ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000c8c7c000-0x00000000c8c7d000) (0MB)
[ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000c8c7d000-0x00000000c8c7e000) (0MB)
[ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x00000000c8c7e000-0x00000000ca3bf000) (23MB)
[ 0.000000] efi: mem51: type=7, attr=0xf, range=[0x00000000ca3bf000-0x00000000ca435000) (0MB)
[ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000ca435000-0x00000000ca7bf000) (3MB)
[ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000ca7bf000-0x00000000ca865000) (0MB)
[ 0.000000] efi: mem54: type=6, attr=0x800000000000000f, range=[0x00000000ca865000-0x00000000ca866000) (0MB)
[ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000ca866000-0x00000000ca868000) (0MB)
[ 0.000000] efi: mem56: type=6, attr=0x800000000000000f, range=[0x00000000ca868000-0x00000000ca869000) (0MB)
[ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000ca869000-0x00000000ca86f000) (0MB)
[ 0.000000] efi: mem58: type=6, attr=0x800000000000000f, range=[0x00000000ca86f000-0x00000000ca870000) (0MB)
[ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca870000-0x00000000ca883000) (0MB)
[ 0.000000] efi: mem60: type=6, attr=0x800000000000000f, range=[0x00000000ca883000-0x00000000ca884000) (0MB)
[ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca884000-0x00000000ca894000) (0MB)
[ 0.000000] efi: mem62: type=6, attr=0x800000000000000f, range=[0x00000000ca894000-0x00000000ca895000) (0MB)
[ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca895000-0x00000000ca8a9000) (0MB)
[ 0.000000] efi: mem64: type=6, attr=0x800000000000000f, range=[0x00000000ca8a9000-0x00000000ca8aa000) (0MB)
[ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca8aa000-0x00000000ca8e3000) (0MB)
[ 0.000000] efi: mem66: type=6, attr=0x800000000000000f, range=[0x00000000ca8e3000-0x00000000ca935000) (0MB)
[ 0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000ca935000-0x00000000ca9bf000) (0MB)
[ 0.000000] efi: mem68: type=6, attr=0x800000000000000f, range=[0x00000000ca9bf000-0x00000000caabf000) (1MB)
[ 0.000000] efi: mem69: type=0, attr=0xf, range=[0x00000000caabf000-0x00000000caebf000) (4MB)
[ 0.000000] efi: mem70: type=10, attr=0xf, range=[0x00000000caebf000-0x00000000cafbf000) (1MB)
[ 0.000000] efi: mem71: type=9, attr=0xf, range=[0x00000000cafbf000-0x00000000cafff000) (0MB)
[ 0.000000] efi: mem72: type=4, attr=0xf, range=[0x00000000cafff000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem73: type=7, attr=0xf, range=[0x0000000100000000-0x000000022f600000) (4854MB)
[ 0.000000] efi: mem74: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem75: type=0, attr=0x0, range=[0x00000000cb000000-0x00000000cfa00000) (74MB)
[ 0.000000] efi: mem76: type=11, attr=0x8000000000000001, range=[0x00000000f0000000-0x00000000f4000000) (64MB)
[ 0.000000] efi: mem77: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[ 0.000000] efi: mem78: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem79: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[ 0.000000] efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem81: type=0, attr=0x0, range=[0x00000000fed98000-0x00000000feda0000) (0MB)
[ 0.000000] efi: mem82: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem83: type=11, attr=0x8000000000000000, range=[0x00000000ffcc0000-0x0000000100000000) (3MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20175/INVALID, BIOS 66CN54WW 01/21/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0C8000000 mask FFE000000 write-back
[ 0.000000] 4 base 0CA000000 mask FFF000000 write-back
[ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask FC0000000 write-back
[ 0.000000] 8 base 22F600000 mask FFFE00000 uncachable
[ 0.000000] 9 base 22F800000 mask FFF800000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02b3f000, 0x02b3ffff] PGTABLE
[ 0.000000] BRK [0x02b40000, 0x02b40fff] PGTABLE
[ 0.000000] BRK [0x02b41000, 0x02b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22f400000-0x22f5fffff]
[ 0.000000] [mem 0x22f400000-0x22f5fffff] page 2M
[ 0.000000] BRK [0x02b42000, 0x02b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22f3fffff]
[ 0.000000] [mem 0x22c000000-0x22f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x02b43000, 0x02b43fff] PGTABLE
[ 0.000000] BRK [0x02b44000, 0x02b44fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xc4daffff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xc4bfffff] page 2M
[ 0.000000] [mem 0xc4c00000-0xc4daffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc61b0000-0xca7befff]
[ 0.000000] [mem 0xc61b0000-0xc61fffff] page 4k
[ 0.000000] [mem 0xc6200000-0xca5fffff] page 2M
[ 0.000000] [mem 0xca600000-0xca7befff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7fcf8000-0x7fffffff]
[ 0.000000] ACPI: RSDP 00000000caffe014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000caffe210 0000DC (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000caff5000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 00000000cafe9000 008814 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000cafbb000 000040
[ 0.000000] ACPI: SLIC 00000000caffd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 00000000caffc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000caffb000 000662 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000caffa000 000A39 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000caff9000 000098 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000caff8000 000058 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000caff7000 000757 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 00000000caff6000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 00000000caff4000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 00000000caff3000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 00000000caff2000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT 00000000cafe8000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000cafe6000 001068 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000cafe4000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 00000000cafe2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 00000000cafe1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 00000000cafdf000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 00000000cafde000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000cafdd000 0009AA (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000cafdc000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DMAR 00000000cafdb000 0000B8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 00000000cafda000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22f5fffff]
[ 0.000000] NODE_DATA [mem 0x22f5f1000-0x22f5f5fff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226c00000-ffff88022ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xc4daffff]
[ 0.000000] node 0: [mem 0xc61b0000-0xca7befff]
[ 0.000000] node 0: [mem 0xcafff000-0xcaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x22f5fffff]
[ 0.000000] On node 0 totalpages: 2066246
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3975 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12807 pages used for memmap
[ 0.000000] DMA32 zone: 819647 pages, LIFO batch:31
[ 0.000000] Normal zone: 19416 pages used for memmap
[ 0.000000] Normal zone: 1242624 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3dad000-0xc3dadfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3dbd000-0xc3dbdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc4db0000-0xc61affff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca7bf000-0xcaebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcaebf000-0xcafbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcafbf000-0xcaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed97fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed98000-0xfed9ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffcc0000-0xffffffff]
[ 0.000000] e820: [mem 0xcfa00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022f200000 s86336 r8192 d24256 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2033937
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 video.use_native_backlight=1 rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7994740K/8264984K available (5271K kernel code, 836K rwdata, 1676K rodata, 1128K init, 1324K bss, 270244K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2494.288 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.43 BogoMIPS (lpj=8314293)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000021] init_memory_mapping: [mem 0xca7bf000-0xca864fff]
[ 0.000024] [mem 0xca7bf000-0xca864fff] page 4k
[ 0.000040] init_memory_mapping: [mem 0xca865000-0xca865fff]
[ 0.000041] [mem 0xca865000-0xca865fff] page 4k
[ 0.000049] init_memory_mapping: [mem 0xca866000-0xca867fff]
[ 0.000050] [mem 0xca866000-0xca867fff] page 4k
[ 0.000058] init_memory_mapping: [mem 0xca868000-0xca868fff]
[ 0.000059] [mem 0xca868000-0xca868fff] page 4k
[ 0.000067] init_memory_mapping: [mem 0xca869000-0xca86efff]
[ 0.000068] [mem 0xca869000-0xca86efff] page 4k
[ 0.000077] init_memory_mapping: [mem 0xca86f000-0xca86ffff]
[ 0.000078] [mem 0xca86f000-0xca86ffff] page 4k
[ 0.000086] init_memory_mapping: [mem 0xca870000-0xca882fff]
[ 0.000087] [mem 0xca870000-0xca882fff] page 4k
[ 0.000095] init_memory_mapping: [mem 0xca883000-0xca883fff]
[ 0.000096] [mem 0xca883000-0xca883fff] page 4k
[ 0.000104] init_memory_mapping: [mem 0xca884000-0xca893fff]
[ 0.000105] [mem 0xca884000-0xca893fff] page 4k
[ 0.000113] init_memory_mapping: [mem 0xca894000-0xca894fff]
[ 0.000114] [mem 0xca894000-0xca894fff] page 4k
[ 0.000121] init_memory_mapping: [mem 0xca895000-0xca8a8fff]
[ 0.000123] [mem 0xca895000-0xca8a8fff] page 4k
[ 0.000130] init_memory_mapping: [mem 0xca8a9000-0xca8a9fff]
[ 0.000132] [mem 0xca8a9000-0xca8a9fff] page 4k
[ 0.000139] init_memory_mapping: [mem 0xca8aa000-0xca8e2fff]
[ 0.000140] [mem 0xca8aa000-0xca8e2fff] page 4k
[ 0.000148] init_memory_mapping: [mem 0xca8e3000-0xca934fff]
[ 0.000149] [mem 0xca8e3000-0xca934fff] page 4k
[ 0.000158] init_memory_mapping: [mem 0xca935000-0xca9befff]
[ 0.000159] [mem 0xca935000-0xca9befff] page 4k
[ 0.000168] init_memory_mapping: [mem 0xca9bf000-0xcaabefff]
[ 0.000169] [mem 0xca9bf000-0xcaabefff] page 4k
[ 0.023864] Security Framework initialized
[ 0.023874] AppArmor: AppArmor disabled by boot time parameter
[ 0.023876] Yama: becoming mindful.
[ 0.024490] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.027098] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.028239] Mount-cache hash table entries: 256
[ 0.028442] Initializing cgroup subsys memory
[ 0.028448] Initializing cgroup subsys devices
[ 0.028450] Initializing cgroup subsys freezer
[ 0.028452] Initializing cgroup subsys net_cls
[ 0.028454] Initializing cgroup subsys blkio
[ 0.028478] CPU: Physical Processor ID: 0
[ 0.028479] CPU: Processor Core ID: 0
[ 0.028485] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.028953] mce: CPU supports 7 MCE banks
[ 0.028966] CPU0: Thermal monitoring enabled (TM1)
[ 0.028975] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 2
[ 0.029094] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
[ 0.030319] ACPI: Core revision 20131115
[ 0.038302] ACPI: All ACPI Tables successfully acquired
[ 0.052784] ftrace: allocating 21068 entries in 83 pages
[ 0.064716] dmar: Host address width 36
[ 0.064719] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.064726] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.064727] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.064732] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.064734] dmar: RMRR base: 0x000000cae8c000 end: 0x000000caeabfff
[ 0.064735] dmar: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff
[ 0.064810] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.064811] HPET id 0 under DRHD base 0xfed91000
[ 0.064984] Enabled IRQ remapping in x2apic mode
[ 0.064986] Enabling x2apic
[ 0.064988] Enabled x2apic
[ 0.064996] Switched APIC routing to cluster x2apic.
[ 0.065463] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.098505] smpboot: CPU0: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz (fam: 06, model: 3a, stepping: 09)
[ 0.098516] TSC deadline timer enabled
[ 0.098529] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.098537] ... version: 3
[ 0.098538] ... bit width: 48
[ 0.098539] ... generic registers: 4
[ 0.098540] ... value mask: 0000ffffffffffff
[ 0.098541] ... max period: 0000ffffffffffff
[ 0.098542] ... fixed-purpose events: 3
[ 0.098543] ... event mask: 000000070000000f
[ 0.125340] x86: Booting SMP configuration:
[ 0.139207] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.125342] .... node #0, CPUs: #1 #2 #3
[ 0.179947] x86: Booted up 1 node, 4 CPUs
[ 0.179950] smpboot: Total of 4 processors activated (19962.73 BogoMIPS)
[ 0.184637] devtmpfs: initialized
[ 0.187964] PM: Registering ACPI NVS region [mem 0xcaebf000-0xcafbefff] (1048576 bytes)
[ 0.188857] RTC time: 16:04:30, date: 03/26/14
[ 0.188897] NET: Registered protocol family 16
[ 0.189005] cpuidle: using governor ladder
[ 0.189006] cpuidle: using governor menu
[ 0.189036] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.189038] ACPI: bus type PCI registered
[ 0.189040] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.189115] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.189117] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.197814] PCI: Using configuration type 1 for base access
[ 0.198491] bio: create slab <bio-0> at 0
[ 0.198622] ACPI: Added _OSI(Module Device)
[ 0.198623] ACPI: Added _OSI(Processor Device)
[ 0.198625] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.198626] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.201979] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.218281] ACPI: SSDT 00000000cae17018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.218701] ACPI: Dynamic OEM Table Load:
[ 0.218703] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.231416] ACPI: SSDT 00000000cae18a98 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
[ 0.231864] ACPI: Dynamic OEM Table Load:
[ 0.231866] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
[ 0.241296] ACPI: SSDT 00000000cae16d98 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
[ 0.241708] ACPI: Dynamic OEM Table Load:
[ 0.241710] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
[ 0.678858] ACPI: Interpreter enabled
[ 0.678866] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.678871] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.678887] ACPI: (supports S0 S3 S4 S5)
[ 0.678889] ACPI: Using IOAPIC for interrupt routing
[ 0.678920] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.679079] ACPI: No dock devices found.
[ 0.685419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.685425] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.685568] \_SB_.PCI0:_OSC invalid UUID
[ 0.685569] _OSC request data:1 1f 0
[ 0.685574] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.686120] PCI host bridge to bus 0000:00
[ 0.686123] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.686126] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.686128] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.686130] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.686132] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.686133] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.686135] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.686137] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.686139] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.686141] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.686142] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.686144] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.686146] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.686148] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.686150] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.686152] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.686153] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
[ 0.686163] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.686272] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.686286] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[ 0.686294] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.686300] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
[ 0.686402] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.686414] pci 0000:00:04.0: reg 0x10: [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.686545] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.686571] pci 0000:00:14.0: reg 0x10: [mem 0xe0400000-0xe040ffff 64bit]
[ 0.686651] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.686706] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.686750] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.686777] pci 0000:00:16.0: reg 0x10: [mem 0xe041c000-0xe041c00f 64bit]
[ 0.686860] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.686964] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.686989] pci 0000:00:1a.0: reg 0x10: [mem 0xe0421000-0xe04213ff]
[ 0.687090] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.687163] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.687207] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.687225] pci 0000:00:1b.0: reg 0x10: [mem 0xe0418000-0xe041bfff 64bit]
[ 0.687303] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.687360] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.687405] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.687430] pci 0000:00:1d.0: reg 0x10: [mem 0xe0420000-0xe04203ff]
[ 0.687530] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.687599] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.687643] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
[ 0.687844] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.687867] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f]
[ 0.687876] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097]
[ 0.687885] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087]
[ 0.687895] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093]
[ 0.687904] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
[ 0.687915] pci 0000:00:1f.2: reg 0x24: [mem 0xe041f000-0xe041f7ff]
[ 0.687967] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.688054] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.688073] pci 0000:00:1f.3: reg 0x10: [mem 0xe041d000-0xe041d0ff 64bit]
[ 0.688097] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
[ 0.688200] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.688225] pci 0000:00:1f.6: reg 0x10: [mem 0xe041e000-0xe041efff 64bit]
[ 0.688950] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.689014] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.689078] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.689138] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.689201] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.689262] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.689329] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.689391] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.689694] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.689701] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.689762] Found 1 acpi root devices
[ 0.689805] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.689890] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.689893] vgaarb: loaded
[ 0.689894] vgaarb: bridge control possible 0000:00:02.0
[ 0.689928] PCI: Using ACPI for IRQ routing
[ 0.691760] PCI: pci_cache_line_size set to 64 bytes
[ 0.691768] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.691809] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.691811] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.691813] e820: reserve RAM buffer [mem 0xc3dad018-0xc3ffffff]
[ 0.691814] e820: reserve RAM buffer [mem 0xc4db0000-0xc7ffffff]
[ 0.691816] e820: reserve RAM buffer [mem 0xca7bf000-0xcbffffff]
[ 0.691818] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.691819] e820: reserve RAM buffer [mem 0x22f600000-0x22fffffff]
[ 0.691905] NetLabel: Initializing
[ 0.691906] NetLabel: domain hash size = 128
[ 0.691907] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.691921] NetLabel: unlabeled traffic allowed by default
[ 0.691943] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.691949] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.693981] Switched to clocksource hpet
[ 0.698589] pnp: PnP ACPI init
[ 0.698603] ACPI: bus type PNP registered
[ 0.698701] pnp 00:00: [dma 4]
[ 0.698727] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.698749] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.698850] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.698888] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.698933] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.698935] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.698937] system 00:04: [io 0xffff] has been reserved
[ 0.698939] system 00:04: [io 0xffff] has been reserved
[ 0.698942] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.698944] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.698946] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.698948] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.698951] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.698982] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.699027] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.699031] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.699074] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.699112] pnp 00:08: Plug and Play ACPI device, IDs SYN2b01 SYN2b00 SYN0002 PNP0f13 (active)
[ 0.699241] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.699243] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.699245] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.699248] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.699250] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.699252] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.699254] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.699257] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.699259] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.699261] system 00:09: [mem 0xcfa00000-0xcfa00fff] has been reserved
[ 0.699264] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.699560] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[ 0.699562] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
[ 0.699565] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.699582] pnp: PnP ACPI: found 11 devices
[ 0.699583] ACPI: bus type PNP unregistered
[ 0.706306] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfa08000-0xcfa0ffff 64bit]
[ 0.706314] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.706316] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.706319] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.706320] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.706322] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.706324] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.706326] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.706328] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.706330] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.706332] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.706334] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.706336] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.706338] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.706340] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.706342] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.706344] pci_bus 0000:00: resource 19 [mem 0xcfa00000-0xfeafffff]
[ 0.706377] NET: Registered protocol family 2
[ 0.706559] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.706739] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.706918] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.706937] TCP: reno registered
[ 0.706951] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.706985] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.707065] NET: Registered protocol family 1
[ 0.707077] pci 0000:00:02.0: Boot video device
[ 0.734160] PCI: CLS 64 bytes, default 64
[ 0.734206] Unpacking initramfs...
[ 0.799245] Freeing initrd memory: 3104K (ffff88007fcf8000 - ffff880080000000)
[ 0.799255] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.799258] software IO TLB [mem 0xbf1c0000-0xc31c0000] (64MB) mapped at [ffff8800bf1c0000-ffff8800c31bffff]
[ 0.799286] Simple Boot Flag at 0x44 set to 0x1
[ 0.799482] Scanning for low memory corruption every 60 seconds
[ 0.799787] audit: initializing netlink socket (disabled)
[ 0.799797] type=2000 audit(1395849870.769:1): initialized
[ 0.815211] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.816571] zbud: loaded
[ 0.816755] VFS: Disk quotas dquot_6.5.2
[ 0.816796] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.816964] msgmni has been set to 15732
[ 0.817018] Key type big_key registered
[ 0.817253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.817299] io scheduler noop registered
[ 0.817302] io scheduler deadline registered
[ 0.817333] io scheduler cfq registered (default)
[ 0.817390] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.817405] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.817464] efifb: probing for efifb
[ 0.818285] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90009280000, using 5628k, total 5625k
[ 0.818287] efifb: mode is 1600x900x32, linelength=6400, pages=1
[ 0.818288] efifb: scrolling: redraw
[ 0.818289] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.823011] Console: switching to colour frame buffer device 200x56
[ 0.827654] fb0: EFI VGA frame buffer device
[ 0.827662] intel_idle: MWAIT substates: 0x21120
[ 0.827664] intel_idle: v0.4 model 0x3A
[ 0.827665] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.827817] GHES: HEST is not enabled!
[ 0.827872] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.828333] Linux agpgart interface v0.103
[ 0.828392] rtc_cmos 00:05: RTC can wake from S4
[ 0.828526] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.828569] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.828579] Intel P-state driver initializing.
[ 0.828589] Intel pstate controlling: cpu 0
[ 0.828603] Intel pstate controlling: cpu 1
[ 0.828627] Intel pstate controlling: cpu 2
[ 0.828638] Intel pstate controlling: cpu 3
[ 0.828736] drop_monitor: Initializing network drop monitor service
[ 0.828775] TCP: cubic registered
[ 0.828835] NET: Registered protocol family 10
[ 0.828947] NET: Registered protocol family 17
[ 0.828953] Key type dns_resolver registered
[ 0.829123] registered taskstats version 1
[ 0.829544] Magic number: 6:146:86
[ 0.829615] rtc_cmos 00:05: setting system clock to 2014-03-26 16:04:31 UTC (1395849871)
[ 0.829652] PM: Hibernation image not present or could not be loaded.
[ 0.830252] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
[ 0.830253] Write protecting the kernel read-only data: 8192k
[ 0.831855] Freeing unused kernel memory: 860K (ffff880002529000 - ffff880002600000)
[ 0.832573] Freeing unused kernel memory: 372K (ffff8800027a3000 - ffff880002800000)
[ 0.837842] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.838870] systemd-udevd[56]: starting version 211
[ 0.853108] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.860944] ACPI: bus type USB registered
[ 0.860963] usbcore: registered new interface driver usbfs
[ 0.860970] usbcore: registered new interface driver hub
[ 0.861033] usbcore: registered new device driver usb
[ 0.861644] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.862015] ehci-pci: EHCI PCI platform driver
[ 0.862170] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.862179] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.862201] ehci-pci 0000:00:1a.0: debug port 2
[ 0.864782] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.864821] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.866118] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.866136] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe0421000
[ 0.867411] SCSI subsystem initialized
[ 0.868417] libata version 3.00 loaded.
[ 0.874215] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.874372] hub 1-0:1.0: USB hub found
[ 0.874378] hub 1-0:1.0: 2 ports detected
[ 0.874585] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.874593] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.874605] ehci-pci 0000:00:1d.0: debug port 2
[ 0.878522] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.878538] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe0420000
[ 0.887569] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.887716] hub 2-0:1.0: USB hub found
[ 0.887723] hub 2-0:1.0: 2 ports detected
[ 0.887965] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.887974] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.888073] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.888098] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.888335] hub 3-0:1.0: USB hub found
[ 0.888348] hub 3-0:1.0: 4 ports detected
[ 0.888700] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.888703] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.888900] hub 4-0:1.0: USB hub found
[ 0.888909] hub 4-0:1.0: 4 ports detected
[ 0.891125] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.914375] ahci 0000:00:1f.2: version 3.0
[ 0.914482] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.914525] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1 impl SATA mode
[ 0.914527] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.915307] scsi0 : ahci
[ 0.915378] scsi1 : ahci
[ 0.915435] scsi2 : ahci
[ 0.915484] scsi3 : ahci
[ 0.915536] scsi4 : ahci
[ 0.915587] scsi5 : ahci
[ 0.915615] ata1: SATA max UDMA/133 abar m2048@0xe041f000 port 0xe041f100 irq 43
[ 0.915616] ata2: DUMMY
[ 0.915617] ata3: DUMMY
[ 0.915617] ata4: DUMMY
[ 0.915618] ata5: DUMMY
[ 0.915619] ata6: DUMMY
[ 1.181353] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.234678] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.235451] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.235457] ata1.00: ATA-9: SAMSUNG MZMTD256HAGM-000L1, DXT42L0Q, max UDMA/133
[ 1.235461] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.236043] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.236192] ata1.00: configured for UDMA/133
[ 1.236523] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMTD256 DXT4 PQ: 0 ANSI: 5
[ 1.239286] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.239503] sd 0:0:0:0: [sda] Write Protect is off
[ 1.239506] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.239553] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.241490] sda: sda1 sda2 sda3
[ 1.242898] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.303737] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.305587] hub 1-1:1.0: USB hub found
[ 1.305681] hub 1-1:1.0: 6 ports detected
[ 1.366288] systemd[1]: systemd 211 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 1.366410] systemd[1]: Detected architecture 'x86-64'.
[ 1.366949] systemd[1]: Set hostname to <ArchYogi>.
[ 1.371967] systemd-efi-boot-generator[115]: Checking was requested for /dev/disk/by-partuuid/3729fee9-5517-4bce-aed1-950a27a8114c, but /sbin/fsck.vfat cannot be used: No such file or directory
[ 1.371970] systemd-fstab-generator[117]: Checking was requested for /dev/disk/by-uuid/C8B9-B8D5, but /sbin/fsck.vfat cannot be used: No such file or directory
[ 1.407523] systemd[1]: Starting Login Prompts.
[ 1.407601] systemd[1]: Reached target Login Prompts.
[ 1.407612] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.407652] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.407662] systemd[1]: Starting Remote File Systems.
[ 1.407717] systemd[1]: Reached target Remote File Systems.
[ 1.407737] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.407857] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.407872] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.407894] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.407901] systemd[1]: Starting Paths.
[ 1.407950] systemd[1]: Reached target Paths.
[ 1.407960] systemd[1]: Starting Encrypted Volumes.
[ 1.408010] systemd[1]: Reached target Encrypted Volumes.
[ 1.408020] systemd[1]: Expecting device dev-sda3.device...
[ 1.408063] systemd[1]: Expecting device dev-disk-by\x2duuid-a1cade15\x2dfeac\x2d4130\x2d977f\x2d86fc383ac3b0.device...
[ 1.408123] systemd[1]: Starting EFI System Partition Automount.
[ 1.408222] systemd[1]: Set up automount EFI System Partition Automount.
[ 1.408230] systemd[1]: Expecting device dev-disk-by\x2duuid-C8B9\x2dB8D5.device...
[ 1.408281] systemd[1]: Starting Root Slice.
[ 1.411504] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.412296] systemd[1]: Created slice Root Slice.
[ 1.412305] systemd[1]: Starting User and Session Slice.
[ 1.412462] systemd[1]: Created slice User and Session Slice.
[ 1.412471] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.412540] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.412548] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 1.412612] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.412623] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.412684] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.412692] systemd[1]: Starting LVM2 metadata daemon socket.
[ 1.412756] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.412766] systemd[1]: Starting udev Control Socket.
[ 1.412824] systemd[1]: Listening on udev Control Socket.
[ 1.412833] systemd[1]: Starting udev Kernel Socket.
[ 1.412889] systemd[1]: Listening on udev Kernel Socket.
[ 1.412898] systemd[1]: Starting Journal Socket.
[ 1.412966] systemd[1]: Listening on Journal Socket.
[ 1.412979] systemd[1]: Starting System Slice.
[ 1.413125] systemd[1]: Created slice System Slice.
[ 1.413138] systemd[1]: Started File System Check on Root Device.
[ 1.413144] systemd[1]: Mounting Temporary Directory...
[ 1.413728] systemd[1]: Starting system-getty.slice.
[ 1.413910] systemd[1]: Created slice system-getty.slice.
[ 1.413938] systemd[1]: Mounting Debug File System...
[ 1.414223] systemd[1]: Starting udev Coldplug all Devices...
[ 1.414616] systemd[1]: Mounting Huge Pages File System...
[ 1.419477] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.419852] systemd[1]: Starting Setup Virtual Console...
[ 1.420199] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.421416] systemd[1]: Started Load Kernel Modules.
[ 1.422447] systemd[1]: Starting Apply Kernel Variables...
[ 1.423037] systemd[1]: Mounting Configuration File System...
[ 1.423497] systemd[1]: Mounted FUSE Control File System.
[ 1.425369] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.425389] systemd[1]: Starting Journal Service...
[ 1.425806] systemd[1]: Started Journal Service.
[ 1.442839] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 1.475136] systemd-udevd[149]: starting version 211
[ 1.522849] ACPI: AC Adapter [ADP1] (off-line)
[ 1.523074] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 1.523090] ACPI: Lid Switch [LID0]
[ 1.523129] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 1.523134] ACPI: Power Button [PWRB]
[ 1.523168] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.523170] ACPI: Power Button [PWRF]
[ 1.526299] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 1.526305] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.526309] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 1.526313] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPCB.H_EC.GPIO 2 (20131115/utaddress-251)
[ 1.526317] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.526318] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 1.526322] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPCB.H_EC.GPIO 2 (20131115/utaddress-251)
[ 1.526325] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.526327] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.533112] [drm] Initialized drm 1.1.0 20060810
[ 1.534509] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 1.534851] wmi: Mapper loaded
[ 1.535603] hub 2-1:1.0: USB hub found
[ 1.535690] hub 2-1:1.0: 8 ports detected
[ 1.546749] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 1.554361] ACPI: Battery Slot [BAT1] (battery present)
[ 1.557790] hda_codec: CX20590: BIOS auto-probing.
[ 1.559167] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.559170] ACPI: Thermal Zone [TZ01] (45 C)
[ 1.560277] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 1.564563] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 1.566923] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 1.567155] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 1.567178] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 1.570300] [drm] Memory usable by graphics device = 2048M
[ 1.570304] checking generic (d0000000 57f000) vs hw (d0000000 10000000)
[ 1.570306] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 1.570321] Console: switching to colour dummy device 80x25
[ 1.573241] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
[ 1.575075] platform microcode: Direct firmware load failed with error -2
[ 1.575079] platform microcode: Falling back to user helper
[ 1.587933] Adding 8361280k swap on /dev/sda3. Priority:-1 extents:1 across:8361280k SSFS
[ 1.605235] iTCO_vendor_support: vendor-support=0
[ 1.605675] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 1.605700] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 1.605797] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.606377] systemd-journald[134]: Received request to flush runtime journal from PID 1
[ 1.615249] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 1.616772] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
[ 1.616788] platform microcode: Direct firmware load failed with error -2
[ 1.616790] platform microcode: Falling back to user helper
[ 1.618686] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
[ 1.618695] platform microcode: Direct firmware load failed with error -2
[ 1.618696] platform microcode: Falling back to user helper
[ 1.619001] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
[ 1.619013] platform microcode: Direct firmware load failed with error -2
[ 1.619016] platform microcode: Falling back to user helper
[ 1.619330] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.621755] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 1.621762] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.621763] [drm] Driver supports precise vblank timestamp query.
[ 1.621848] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.715200] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 1.730067] fbcon: inteldrmfb (fb0) is primary device
[ 1.765339] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ 1.802021] tsc: Refined TSC clocksource calibration: 2494.337 MHz
[ 1.830499] intel_rapl: domain uncore energy ctr 60509:60509 not working, skip
[ 1.915603] usb 1-1.5: new full-speed USB device number 5 using ehci-pci
[ 2.151154] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.152936] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.157046] scsi6 : SCSI emulation for RTS5139 USB card reader
[ 2.157172] usbcore: registered new interface driver rts5139
[ 2.157210] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S.Apparently one cannot run dhcpcd AND NetworkManager at the same time. I feel really stupid, but at the same time I spent most of today looking through the wiki.
For those newbies who ran into this, do this with root access:
systemctl disable dhcpcd.service
systemctl enable NetworkManager.service
Marking this as solved. -
Hi I just purchased a WVC54GCA wireless video camera I am having a problem with the setup software
I just purchased this wireless video camera and I am trying to set up the wireless key. I have put in the SSID and then the option of WEP (128 bit) or 26 character key. I then try to input the 26 character key and the text box can't take that number so I am supposed to click next and enter the key on the next page..... only it is at the last page where you would save the settings and I don't see anywhere to edit it. I know I get a bit hurried is there something I am missing?? I would appreciate any assistance you can offer. Thanks a ton
If you are trying to configure your Camera using the Setup disk, you can exit from the setup and configure all the settings on your Camera Manually.Follow the Instruction below to Configure your Camera manually..
1. Connect your Camera to a computer, click on the Start button >>> Settings >>> Control Panel >>> Network Connections - Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'- Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0...Click on Ok button to Save and Click on "Close" on main Properties window...
2. Now open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.115.
Use admin for both Username & Password in lower case...It should open your Camera set-up...
3. Once you get to the set-up page you can follow this link to change the Camera Settings...While changing the Camera settings you have to make sure that the Wireless Settings(SSID/Network Name and WEP/WPA Key) are identical on both the devices(router and camera)...Also make sure to change the camera's default IP to match your network and Gateway Address should be your router's address...ex. Camera's IP Address : 192.168.1.115(assuming your router's default address is 192.168.1.1), Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1.
4. After configuring the Camera you should disconnect it from the Computer and go into Local Area Connection TCP/IP Properties and set it back to Obtain IP Address Automatically...Disconnect the Camera from the computer and power cycle both the devices(Camera and Router)...Your camera should be configured...
In case if you don't get the Camera set-up just leave it connected to your computer and reset it for 30 seconds...
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your Camera, wait for 30 seconds and re-connect the power cable...Follow Step 2, Step 3 & Step 4...
Click Here and follow the instructions to configure the camera with the Wireless Settings. -
Having a problem with the DVD drive not being recognized by the computer
Compaq Presario CQ60-215DX NOTEBOOK PC, WINDOWS VISTA, Error 10 when trying to reinstall the driver, says cannot start.
I went thru the HP troubleshooting and it said to see the mfg of drive to solve problem! I finally bought a new DVD drive P/N498479-001 for replacement . uninstalled the old drive & then reinstalled the new drive , restarted the computer & it still will not recognize the DVD player! Same error code, same problem. The problem started when I tried to play a CD that appeared to be scratched pretty badly, however my desk top played the CD with out problems? When you click on "computer" the drive does not show up!
I did install a new router a couple of days before this happened, but I am using a data cable to it, so that should not be a problem. Any Ideas?Apple has moved on from Firewire and the current iMacs (and most MBPs) have Thunderbolt, USB3 and USB2.
There are Firewire toThunderbolt adaptors. Here's one. You also want a four pin to nine pin FW cable to run from your camera to the adaptor.
Russ -
What harddisk do i need for my compaq presario CQ60
what hardd disk do I need For my Compaq Presario CQ60? And where would be a good place to try and get a quality one for a lower price? Thanks ahead of time.
This question was solved.
View Solution.Hi,
The drive on the link below is an example of one that would be fine for your notebook as long as it is the same capacity or larger than your current HDD.
320Gb Hard Drive
The procedure to replace the Hard Drive is detailed starting on Page 51 of your Maintenance & Service Guide.
Once done, simply use your Recovery DVDs to reinstall the Operating System on the new drive.
If you don't have your Recovery Discs, you can order a replacement set using the link below.
Order HP Recovery Discs.
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Compaq Presario CQ60, overheating and automatically shutting down.
Hi.
I have a Compaq Presario CQ60 that is about a year old. These days I have been experiencing problems with my laptop. The problem is that the top hand corner gets hot, and then my laptop automatically shuts down itself. There is plenty of battery on my laptop, and it also happens, while my charger is plugged into it. This mainly happens when I am at school, where I do not bring my notebook fan cooler. I can basically do nothing, because every 30 minutes it will automatically shut down itself. It even happens when I am in "Battery save" mode. This is starting to irrate me, because I have only had this laptop for about a year, and my warranty just expired so there isn't much I could do. I have read about this being a problem to a lot of people...
I am wondering if it has something to do with my battery, because it is really bad. It only lasts for about 30 minutes from 100% to 10%. I do not know what the problem is, because I have no expertise in laptops.
I hope you can help me.HI;
The easiest thing to do is to spray canned air into the vents by the fan and heat sink. If a lot of dust comes out, that will probably take care of the issue. If no dust comes out, then you have other issues causing overheating and thermal shutdown. Take care not to overspin the fan blades when you blow the air into it.
Paul
Maybe you are looking for
-
How do I sync videos from an online account to my itunes?
I want to sync workshop videos (DVDs) from an online account to iTunes so I can watch them on my iPad (3). How do I do this? The video clips are compatible with iPads. Thanks for your help! Bonny
-
How to get the IP address of RMI server???
Hi: Is there a way to know the IP address of RMI server before client and server connect? I am assuming that client didn't know the IP address of the server. Because I know that client must hold a server reference so that client can connect to server
-
Just starting getting phantom emails in my inbox from 1969 with no sender/no content and I cannot even delete them...wassupp?
-
Suggestions needed for repair of my HP Officejet 4110. It won't pick up paper in the paper tray. The rollers look good...even wetted them according to the HP repair instructions. I even changed the toner cartridges and paper. It's making a creeky
-
Setting bitrate in Create ACC version
I am preparing some material for a presentation and the organization specifies that my audio files must be at a bitrate of 128 (sample rate 44.100). When I create the ACC it show at a bitrate of 256 (VBR). Is there a way of creating the AAC so I am s