Compaq presario cq61 312sa wont perform a system recovery from hard drive

When i turn on my Compaq Presario CQ61 312SA it looks like it is going to start ok then flicks to a white page with page cannot be found???
i have tried and would like to completely restore to it's original settings but when i turn it on and repeatedly press F11 it just beeps constantly and has a blank screen for ages.
any clues or quick fixes?
from searching online i gather i can't get hold of any recovery discs?
thanks, hope somebody can help

Hi:
If you can still read the windows 7 product key on the bottom of your notebook you can make your own W7 installation disk.
Here's how:
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Or use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB method of compilation.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

Similar Messages

  • Windows Vista/Serv​ice Pack 2-after performing a System Recovery my Hard Drive is full.

         I would like to thank you in advance for your patience.  I am new to this forum solution method.  I will do my best to explain what is happening with my computer without too much unnecessary information.
         My laptop is 2 yrs old and it all these error messages started popping up repeatedly.  Windows Defender wouldn't open, system info errors, I/E crashes and so on.  After numerous attempts to fix it myself,  I asked Microsoft support for the solution.     M/S Tech Support instructed me to perform a System Recovery, through the startup/F-11 method and so I did.  I followed all of M/S instructions and to skip the step for making a set of Backup disks, as well as the Recovery Manager's steps to complete the recovery.  After all was done I noticed that all my personal files, (pic's, music, etc...),  were gone and that my Hard Drive is out of space.  I did a Disk Cleanup and defrag on both the C: and D: drives hoping that it would solve my problem.  NOT!!!  I have been looking through all the "Trouble shooting" support topics on both MS and HP.  I have been afraid of doing any of the MANY suggested steps for fear of causing more damage.  The computer, except for the D: drive delima and Windows Defender not opening,  seems to function properly, so I look at that as the real blessing in all this.
         Please help me by telling me that there is a way to fix the Hard drive and get Windows Defender to respond.  Most importantly, how to go about getting it done.  I just don't know how or why this happened.
         Thank you so much for your help.  Nice to know that there are web sites and forums like these to go to for help.  I look I look forward to your response. 

    This excerpt taken from HP manual for your computer.
    On some models, you can perform a recovery from the partition on the hard drive from either the Start
    button or f11. This restores the computer to it's factory condition.
    To restore the system from the partition, follow these steps:
    1. Access Recovery Manager in either of the following ways:
    ● Select Start > All Programs > Recovery Manager > Recovery Manager.
    – or –
    ● Restart the computer and press f11 while the “Press <F11> for recovery” message is displayed
    on the screen. Then select Recovery Manager.
    Recovery Manager opens.
    2. Click Advanced Options.
    3. Click System recovery, and then click Next.
    4. Follow the on-screen instructions
    Does this sound like what you did?
    Oh yeah, Your D:\ drive is your Recovery partition and you should never mess with it.
    It contains all the information to restore your computer to factory condition.

  • System Recovery After Hard Drive Replacement

    I have a HP Pavilion dv6000 that the hard drive crashed on. I purchased a new hard drive for the laptop, but since the Windows Vista operating system and all the factory installed programs were on the Recovery Partition of the bad hard drive, I have no way to recovery the necessary files I need to restore it. Is there any way to get the necessary files/programs to restore the system to factory settings?
    Please Help!
    Thanks,
    Selena

    Hi:
    You can probably still get a set from this vendor at the link below.
    http://www.computersurgeons.com/
    With regard to XP...yes, it will probably work but it may not be easy to do.
    I would need to know the full model number of your dv6000 to give you the instructions to install XP because they are different depending on model series.

  • Satellite A200 System Recovery from USB drive

    Hi all,
    I have a A200-1BW laptop, the issue is that its CD/DVD is not working. I have all the 3 recovery CDs for Windows Vista (Ultimate) provided by Toshiba, but I cannot restore my system. Is it possible to copy the recovery CDs on USB drive and then execute the system recovery for windows vista (ultimate).
    Regards,
    Asad

    Hi
    I never tried that but I found this thread:
    http://forums.computers.toshiba-europe.com/forums//thread.jspa?messageID=228171
    Check this. Maybe it would be helpful
    You can also try to install fresh copy of Windows OS using the USB pen drive.
    There are many instructions how to do that with Win 7. Just google
    After installation of fresh Win 7 you could install the drivers from Toshiba European driver page.

  • Compaq Presario CQ61 312SA laptop screen cracked

    Trying to find a way to replace the laptop screen on this laptop, but i am unable to get the original screen out of its casing.
    Can someone direct me to a guide on how to do this, or show me if they know themselves?
    Thank you.

    This has step by step picture instructions, which is nice:
    Manual
    Page 4-21 is where it starts for you.

  • System crash from hard drive

    Hey all,
    I've got a problem when i plug in my firewire drive to my new MBP. It gives me the grey curtain of death. I've tried doing the usual like PVRAM and the PMU settings.
    It started when I was trying to add a partition to the drive using disk utility. It got 90% of the way through and i got the curtain of death.
    I've tried booting in Safe mode which won't appear to load, even after about 5 mins. I've tried booting of the CD, but when I plug the drive back in it just crashes again.
    Basically I'd like to be able to stop it mounting so I can access it from the disk utility and try a repair. Failing that, a straight format.
    Any suggestions welcome. Thanks in advance
    Here is the error report:
    Tue Dec 2 00:46:15 2008
    panic(cpu 1 caller 0x001F9314): "jnl: mod block start: bufsize 512 not a multiple of block size 4096\n"@/SourceCache/xnu/xnu-1228.8.30/bsd/vfs/vfs_journal.c:2282
    Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
    0x2a3cb2a8 : 0x12b4c9 (0x45aaac 0x2a3cb2dc 0x1335ba 0x0)
    0x2a3cb2f8 : 0x1f9314 (0x46c084 0x200 0x1000 0x0)
    0x2a3cb348 : 0x332719 (0x4595d10 0x2bd46c30 0x0 0x200)
    0x2a3cb3e8 : 0x33bb5c (0x6037804 0x1 0x0 0x2a3cb778)
    0x2a3cb7a8 : 0x334123 (0x6037804 0x476e804 0x0 0x0)
    0x2a3cb8b8 : 0x335b8b (0x0 0x60459a4 0x0 0x0)
    0x2a3cb9a8 : 0x1f5c6e (0x4e5b260 0x6cd7510 0xbffffdd4 0x0)
    0x2a3cb9f8 : 0x1df3e8 (0x4e5b260 0x6cd7510 0xbffffdd4 0x0)
    0x2a3cbf28 : 0x1dfaa9 (0x4e8804c 0x2a3cbf48 0x60458e4 0x1)
    0x2a3cbf78 : 0x3df09b (0x4e8804c 0x60458a0 0x60458e4 0x0)
    0x2a3cbfc8 : 0x1a0767 (0x5c738c0 0x0 0x1a30b5 0x5c738c0)
    No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbffffe28
    BSD process name corresponding to current thread: mount_hfs
    Mac OS version:
    9F2114
    Kernel version:
    Darwin Kernel Version 9.5.1: Fri Sep 19 16:19:24 PDT 2008; root:xnu-1228.8.30~1/RELEASE_I386
    System model name: MacBookPro5,1 (Mac-F42D86C8)

    How about booting into the Leopard DVD and accessing the drive?
    Have you tried a different cable?
    Single user mode?

  • Compaq Presario CQ61 Wont Boot

    So Like Most owners of the Presario, My Computer wont boot. Its a blank screen and the LED blinds towards BIOS Corruption but since I cant even get out the blank screen Any help would be very well indeed Helped. Below is Info and things I've Tried
    Computer Type: Compaq Presario CQ61-319WM
    Operating System: Windows 7
    Warranty: Gone
    Bought: 3 Years Ago
    What Happened when this all started: I was drawing on photoshop, I closed it so it would go to sleep mode. I left the house for an hour to shop and come back to this blank screen and LED blinking Lights (Twice)
    Last Six months had To System Restore Twice, An Update back in March made my computer not work so was forced to system restore. 
    Things I've Tried:
    *Hard Reset More than 5 times, nothing worked
    *Bought New Charger
    *Bought New Battery
    *Removed/Reseated my two 2gb Ram sticks. Switched them
    *Removed HDD/Battery to see if it Was the HDD
    *Took apart computer before I knew it was the BIos to see if it was the moniter or if the wires got exposed or snapped
    Than I tried to get into the BIOS Recovery, tried the Win button +B button/Power, f2 and f10. Nothing gets my computer off the blank screen.
    I Think Ive gotten everything Down. Should I send it in even though it would be smarter to just buy a new computer? Im at a lost of what can be done . Almost Every person with this problem got fixed by Hard Reset.  I dont know how to deal with BIOS. So Please Help If You can.

    The troubleshooting steps mentioned in the following weblinks might help you to resolve the issue:
    HP Notebook PCs - Use Hard Reset to Resolve Hardware and Software Issues
    HP Notebook PCs - Blank Screen LED Error Codes
    HP Notebook PCs - Troubleshooting No LED Lights Glow During Startup or Boot
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • HP/Compaq Presario CQ61 wont start up or charge, only the side charging light is on.

    I have a major problem with this Laptop Compaq presario cq61. I had to fix the cpu fan and after putting back the parts laptop i came to know it wasnt turning on.It is not even charging. only one charging light is lit, (the one on the right).when i press the power button the power light starts blinking and the light in the button too, and after that the charging light blinks three times and then stops. I opened the laptop again to check if i missed to put back a wire or something,but everything seemed fine. Please help me with it, because i have all my important data in it.you can also send me an email at [Personal Information Removed]

    @Captain_A ,
    Hello and thank you for posting on the HP support forums.  Here is a link that will help you understand the blink code you are seeing.
    Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot
    I hope this will help you with your issue.  If you need further repair support.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Thank you again for posting. Have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • Compaq Presario CQ61, unable to boot laptop

    Compaq Presario CQ61 running Windows 7 Home Premium (build 7601) purchased approx 4 years ago.
    Computer failed to re-start after a period on standby.  I suspect that it may have failed an automatic reboot following the automatic installation of an update - this is only a guess as I have no access to the computer at the moment, but I had a similar problem recently - on that occasion I managed a 'Safe Mode' start - pressing F8 a number of times gave me access to the appropriate screen.  I subsequently implemented System Restore at a point just prior to a the automatic installation of a Windows critical update, and that seemed to do the trick.  
    On this occasion the F8 route fails to have any effect on the problem; the 'caps lock' and 'num lock' LED's just blink continuously (i.e. not a limited number of times), the fan starts, but there is no other sign of life.  I have tried a hard re-start, but to no effect.  I have also removed and replaced the memory, but again to no effect.
    Can you advise please.
    This question was solved.
    View Solution.

    I'm afraid there is no sign of life in your computer either:
    What excactly happened?
    If you tried to reseat the memory, your motherboard might be dead.
    Your motherboard is actually very old too, very less motherboards could last 4 years.
    Hopefully the motherboard is fine cause you have lights flashing, which thats one thing of what the mother needs to do, check every component and start up the computer. If the lights are just on, then your motherboard is not working, as it is not doing its job.
    But, the good news is, the costy part is ok.
    I really need to now what actually happened, please be as detailed as you could to help you troubleshoot the problem.
    Perhaps, what helps is, taking a video of the start up of the computer of blinking lights.
    Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
    **Click the White thumb if you like the answer.**
    **Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
    Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

  • Recovery Bios Password COMPAQ PRESARIO CQ61

    Hello,
    I have an COMPAQ PRESARIO CQ61 and suddenly is asking me for the bios password.
    The message that appear is "ENTER ADMINISTRATOR PASSWORD OR POWER ON PASSWORD".
    What can i do? After failing 3 times I get the message "System Disabled" and the code 73585421.
    Cheers
    This question was solved.
    View Solution.

    Yeahhhh! It worked! On my way to disable this config in bios...

  • COMPAQ PRESARIO CQ61 Bios Password

     COMPAQ PRESARIO CQ61 Power on password system disable 
    code: 92621876
    Can someone please help me get into it, my kid put a bios password on by mistake. 

    Please let me know if you are now able to access the BIOS with the Password I provided. Please let me know if you are still facing the same issue, so I can further assist you
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • I cant access itunes storesMicrosoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002) Hewlett-Packard Compaq Presario CQ61 Notebook PC iTunes 10.6.0.40 QuickTime not available FairPlay 1.14.34 Apple Application Support 2.1.7 iPod Updater Libra

    i cant access to itunes store
    here is dignostic report
    Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
    Hewlett-Packard Compaq Presario CQ61 Notebook PC
    iTunes 10.6.0.40
    QuickTime not available
    FairPlay 1.14.34
    Apple Application Support 2.1.7
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.1.1.4
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0025AE8C032360A0
    Current user is not an administrator.
    The current local date and time is 2012-03-27 13:06:24.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.6.0.40 is currently running.
    iTunesHelper 10.6.0.40 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {23DDA231-A7E0-409A-AB19-CEDE8ACE6359}
    Description:          speedinfo
    IP Address:          182.237.181.108
    Subnet Mask:          255.255.255.255
    Default Gateway:          0.0.0.0
    DHCP Enabled:          No
    DHCP Server:
    Lease Obtained:          Thu Jan 01 05:30:00 1970
    Lease Expires:          Thu Jan 01 05:30:00 1970
    DNS Servers:          202.177.240.125
                        202.177.240.251
    Adapter Name:          {948D9871-ADAF-4632-8D0C-538770929B52}
    Description:          Atheros AR5007 802.11b/g WiFi Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Thu Jan 01 05:30:00 1970
    Lease Expires:          Thu Jan 01 05:30:00 1970
    DNS Servers:
    Adapter Name:          {4D499748-069C-4E58-A116-DF748DA3912C}
    Description:          Realtek RTL8102E/8103E Family PCI-E Fast Ethernet NIC (NDIS 6.0)
    IP Address:          192.168.0.2
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.0.1
    DHCP Enabled:          No
    DHCP Server:
    Lease Obtained:          Thu Jan 01 05:30:00 1970
    Lease Expires:          Thu Jan 01 05:30:00 1970
    DNS Servers:          192.168.0.2
                        192.168.0.4
    Active Connection:          speedinfo
    Connected:          Yes
    Online:                    Yes
    Using Modem:          Yes
    Using LAN:          No
    Using Proxy:          No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    iTunes has never successfully accessed the iTunes Store.

    i cant access to itunes store
    Can you walk us through what happens when you try to connect to the Store, please?

  • Where can i buy a new cooling fan for my Compaq Presario CQ61-330SO Notebook PC?

    like the headline says.
    Where can i buy a new cooling fan for my Compaq Presario CQ61-330SO Notebook PC?
    it died almost a month ago and i have been searching for a new one since
    I searched all over HP's website and cant find any information about that, not even the name of the fan.
    som help here would be wary appreciated

    Hi,
    You can order from here:
      http://h20141.www2.hp.com/hpparts/?cc=US&lang=EN&jumpid=hpr_r1002_usen
    and part # is in here (page #3-4):
      http://h10032.www1.hp.com/ctg/Manual/c01868653.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Compaq Presario CQ61-424SA Laptop - eSATA/USB combo port does not allow eSATA connection

    Hi,
    I recently purchased an external HDD with eSATA connection for use with my Compaq Presario CQ61-424SA laptop.
    The specification on the laptop states it has a eSATA/USB combo port however there doesn't appear to be one. On closer inspection there is 2 USB ports on the right hand side of the laptop (which work fine with USB devices) and one on the left which is slightly wider than the other 2 (which also works fine with USB devices). However when trying to connect an eSATA cable to the port it does not fit and on closer inspection it does not look like the conventional eSATA/USB combo ports.
    Does anyone know if this laptop was spec'd incorrectly or does indeed have an eSATA/USB combo port.
    The cable I'm using was supplied with the external HDD I brought with connections as shown in this link.. http://www.comesource.com/storeweb/images/cable%20esata%20to%20esata.jpg
    Any help would be greatly appreciated!

    Hi, I am having the same problem with the "e-sata/usb shared port" , which does not look like a normal e-sata port, and the e-sata connector won't fit in it.
    Can anybody help us?

  • Compaq Presario CQ61-100SO

    Hello!
    I have a Compaq Presario CQ61-100SO Notebook PC, and I have a question... does my computer have Bluetooth? I searched through my computer and couldn't find it, so I went to my manufacturer's website and searched there, but couldn't find anything.
    Thanks in advance!
    This question was solved.
    View Solution.

    There is no physical switch/button on the Notebook to turn ON/OFF the bluetooth on the Notebook. Also As per specs of the Notebook found here, the Notebook doesnt support bluetooth as well.
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

Maybe you are looking for

  • Reading/ Writing Socket in order

    Hi, I have a client / sever model which I'm finding very hard to implement, it is this way: I've got a server which clients connect to, every client can fire events in other clients, example: a client sends a file to be re-sent to other clients, othe

  • How track changes in production order which is already Read PP master data

    Hi Gurus, Due to some unavoidable reason my client has to do Read PP master data time and again, now my client having a requirement that want to see what has been changes in Production Order. We already created 1 report for that which tracks whatever

  • Tax based on Sold to Party

    Hi,   Our requirement is that while creating SO the tax should be as per sold to party , as ref. to below thread Tax based on Sold to Party or Bill to Party.  i have maintain A' in Go to IMG Path --> SD --> Basic Functions --> Taxes --> Maintain Sale

  • Soundtrack Project is Dead Slow!

    I just sent my FCP project to a multitrack project in Soundtrack Pro, but when i want work on the Soundtrack project, everything keeps freezing. its did slow! whats the problem? and how can i solve it?

  • Youtube videos state: "An error occurred. Please try again later."

    I was using the Firefox 4 beta for a while, and Youtube had always worked. Then when the final RC came out (or one of the last betas, don't fully remember), I immediately installed it, yet Youtube gave me the message stated above when trying to play