Compaq presario desktop s6000nx. the "on" indicator light keeps blinking. doesn't turn on.

What is the problem?

Hi FraX93,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Here are the instructions on performing a software repair on the device.
1. Before you start you have to download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
and install it on your PC.
2. Once installed on your PC, double-click the PC Companion icon on your desktop to start the update.
Note! For some models you will be prompted to do a backup prior to the update and then restore.
3. Install and open PC Companion then select Support Zone.
4. Phone Software Update.
5. Start.
6. Repair Phone
7. Continue
8. Accept data removal
9. Next
10. Wait for prepare
11. Select Phone
12. Follow the connection steps
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • HT1551 the led light keeps blinking after restarting it

    The apple tv light keeps blinking after restartin it with remote.

    You will need to restore it on a computer using iTunes.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support
    Scroll down to the section titled:If your Apple TV still does not respond or if you were unable to follow the above steps

  • Compaq Presario Desktop has beeping noise and will not boot

    My Compaq Presario Desktop PC is making a beeping noise and will not boot. The SN# is CNX65112RS. Will someone please help me!!!
    This question was solved.
    View Solution.

    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph03886&lc=en&dlc=en&cc=us&lang=en&product=3352...

  • Has anyone had any issues with the sleep indicator light?

    I have a 15.4-inch MacBook Pro 2.8 GHz (Late 2009) and recently I have noticed some issues involving the sleep indicator light and my Mac sleeping.
    I learned that the sleep indicator light is supposed to be on when you press the power button until the chime sounds and then its supposed to be recognized when the computer sleeps or when the lid is closed.
    Lately, the sleep indicator light has not be working when the computer boots (it still chimes), when the computer shuts down or when the computer is sleeping. The computer still sleeps if you close the lid, but it acts up when you don't and use the Apple menu (Apple > Sleep), keyboard shortcuts (CmdOptionMedia Eject) or use the power button and select "Sleep". Usually when I use this method instead of closing the lid, the authentication login window appears and when I click "cancel", the computer sleeps.
    But still the sleep indicator light does not appear any time. I'm wondering if I need to get my Mac serviced. I still have a 2-year Best Buy Geek Squad warranty on the MacBook Pro.
    +It is weird that this is happening to me, cause my computer is only 1 year and 4 months old.+
    Is there anything you know that would help fix this issue.
    Message was edited by: studabaker
    Message was edited by: studabaker

    The microUSB cables are fairly common... most portable electronics today use them for file transfer/charging.
    If the user does not own one, they can be purchased from most retailers fairly inexpensively.

  • My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

    My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

    This didn't work for me, so I did a bit of searching and TONS of pages later in google, I found an answer. Here are the steps for people who also were in my situation:
    1. Take off bottom case
    2. Unplug battery - blurry image here: http://i.ytimg.com/vi/03cC79r5Dx4/0.jpg
    3. Press and hold power button for 5 seconds
    4. Plug a charger in, and it should start booting up
    5. After shutting down again, reconnect the battery and close the case up
    6. It works! (hopefully, if you guys had the same situation I did)

  • Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

    My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

    The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
    http://support.apple.com/kb/HT4367

  • HT1551 after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

    after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

    The update failed - using a USB to microUSB lead (that Apple annoyingly don't include!), try to restore the AppleTV software to current version software using instructions here:
    http://support.apple.com/kb/HT4367
    Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

  • My iPod 4th-gen charges just fine in any wall outlet, but when connected to my brand new ASUS Windows-8 laptop's USB 3.0 port the charging process just keeps "blinking" on both the iPod and the laptop and will not connect to Itunes...

    Hi, I HATE to ask for help with this, but I HAVE looked everywhere and Google searched different wordings and have not found anything similar nor a solution to my problem!                                                                                                                                                                                                                               My good old iPod 4th-gen charges just fine in any wall outlet, in any house, but when I connect it to my brand new ASUS laptop that has Windows-8 and 3.0 USB ports using the charging/data cable, the charging process just keeps "blinking" BOTH the iPod and the laptop and it will not connect to ITunes and I get "A Device is Detected" message that keeps popping up and going away over and over right above the Windows desktop toolbar.                                                               When I go to control panel and select "Devices" it does show the iPod, but for only a split second and than it disappears, but than it comes back again for a split second and than it disappears again and just keeps doing that over and over and over!                                                                                                                  I have tried resetting the iPod while it is plugged into the laptop by holding the power and menu buttons, that did no good.                                                             I also tried uninstalling iTunes and any other Apple stuff listed and reinstalling it all, that did NOT work!                                                                                          The iPod, the laptop and iTunes ARE all fully updated!                                                                                                                                                                I AM using a brand new charging/data cable that I just opened up an hour ago (I've learned to keep a few brand new ones around at all times since these piece of garbage rip-off cables hardly last a week, even when you baby them!). I also tried a few old cables, they all do the same thing!                                                       I would like to get this piece of junk to connect to my new laptop, even if only once, so that I can change/delete some songs and transfer a few dozen photos,since I haven't been able to do any of that stuff since my old laptop (that NEVER had any problems connecting) died way back in May! lol.                                                                                                                                                                                                 I hope somebody knows a fix or solution! Thank You!

    Try on another computer to help determine if iPod or computer problem.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Laptop won't start quickly but power wifi and caps lock light keeps blinking

    Hi, it has happened before too but rarely but nowadays it happens on daily purposes.
    When I switch on my laptop after leaving it for 8-9 hrs, it won't start up but instead power, wifi and caps lock light keep blinking. I tried removing battery and pressing power button for few minutes but nothing happens. Then i left it like that with lights blinking and after 15 20 minutes it booted. I did same yesterday too. I left it like that it booted after 20 minutes..so My question is "why is this happening? Is it a motherboard issue or is it because of cold moisturous weather here and laptop takes time to get warm up?" Should I show it to HP Service center?

    Hi @Nishant5788
    Welcome to the HP Support Forums. I see that you are having a problem getting your notebook to boot up normally. As for what is causing the problem the blinking Caps Lock should tell us what is causing the problem as it should be blinking in a pattern. This HP document Computer Does Not Start and LEDs blink has a chart that will tell you what the blink codes mean.
    This is most likely a hardware issue and you can give us a call regarding repair options.  You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Amber Light Keeps Blinking

    Amber light keeps blinking. I have been unable to set up wireless and never get a green light. Connection to internet works via cable to the Airport base station. I have done numerous resets and with power on off cycle per instructions on page 29. This is a brand new unit, arrived today, so it has never been working. I have hit the reset button both with power on and while powering up. Did a firmware update too. Still no luck. Is this a defective unit since it will not reset? I have also done complete resets with the DSL modem cycled off and back on, Base station off and brought back to power, and MacBook Pro cycled on and off too.
    Should I call the vendor and ask for a replacement?
    Popadave

    Hello popadave. Welcome to the Apple Discussions!
    A persistent, flashing amber light indicates that any of the several potential conditions may require your attention:
    o The base station has not yet been configured because it is new, or the reset switch has been set.
    o You have selected a security configuration that is not recommended.
    o One of several other conditions, such as a disconnected Ethernet cable or invalid IP address has been detected.
    (ref: http://docs.info.apple.com/article.html?artnum=305101)
    If you run the AirPort Utility, it will show an amber circle on the summary page next to the area(s) causing the problem. Click on this amber circle and it should provide an explanation.
    Please post back what you find.

  • ISight camera green light keeps blinking.

    using a macbook pro with retina display.
    The green light keeps blinking when not in use. 
    The camera is still able to function.

    If you are concerned about the blinking although your camera works, contact Apple Support or  an Apple Authorized Service Provider for service.
    Message was edited by: EZ Jim
    Mac OSX 10.10.1

  • WRV200 Wireless light keeps blinking, no clients connected.

    Hi,
    Sorry if this is a silly question, but im wondering why my linksys wrv200 wireless light on the router keeps blinking even though my wireless laptop is not turned on?  I checked the router status and no other clients are connected so im puzzled as to why the wireless activity light is blinking which shows activity as per the manual.
    Is this normal??  
    Thanks

    The DHCP client table only contains the computers which requested an IP address from your router. Any device/computer with a static IP address will never appear in that list. You cannot tell if a wireless client with a static IP address is still connected or not.
    Wireless clients may (more likely) appear in the wireless client list. I don't know if the WRV200 has it or not. Usually you'll find the wireless client list by going to the wireless MAC filter setup tab. Enable the filter if it is not enabled (no need to save the setting), press edit filter list, and it pops up a window where you have another button "wireless client mac list". That button shows you a window of active and inactive wireless clients with their IP address. Any static IP address client should appear there, too. (If the list is not there, search the manual for it...)
    You could make another test: change the SSID temporarily on the router to something else. A longer random string. Setup WPA2 with a random preshared key. Save the settings. Disconnect all computers from the router. Still blinking? Unplug the modem connection from the router. Still blinking? If the router is still blinking with nothing wired to it and a wireless network that nobody knows (yet), well, that should clearly indicate a router problem (or at least a wireless light problem). If that is the case it should not be too hard to bring the router back to the shop and show them what is happening.Message Edited by gv on 12-18-200605:43 PM

  • My keyboard light keeps blinking and a message on computer says connect keyboard with bluetooth

    My keyboard light keeps blinking and the computer has a grey screen with picture of the keyboard with message saying connect your keyboards bluetooth to computer...but it doesnt do anything even when i shut computer off then turn it back on.

    Sounds like a pairing issue. See if this article helps http://support.apple.com/kb/HT1809

  • The iPod touch 5 battery won't charge, the iPod battery gets hot and doesn't turn on...  What is wrong?  Can photos and data be retrieved?

    The iPod touch 5 battery won't charge, the iPod battery gets hot and doesn't turn on...  What is wrong?  Can photos and data be retrieved?

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store. I suspect a hardware problem  due to the hotness. If iTunes can't see the iPod then uor only hope if to contact a data recovery company for getting data off the iPod. If you have an iPod backup you can restore another iPod, iPhone or iPad from the backup to get the data that was in the backup
    Apple Retail Store - Genius Bar                          

  • HT201956 Why does the right side of the menu bar disappear or blink when I turn on my epson XP200 printer?

    Why does the right side the menu bar disappear or blink when I turn on my epson XP 200 printer?

    I have also been experiencing the same problems. Mac user since 1991. I own various machines but this particular problem lies with a MacBook Pro 2008 using 10.5.4
    The laptop has two users. One is fine while one is not. A new user was created but upon logging in for the first time the right hand side of the menu bar blinked off and on just like the existing user. No hard drives have been connected. All files backed up via drag and drop wirelessly.
    Since this development I have been unable to get to my iDisk; it might be related or coincidental. Last night I re-entered my .mac/MobileMe account details whereupon I was presented with a message saying the machine had not synced before. Not true. It had been syncing automatically since the day of purchase March 2008. I wonder if there is a connection between somewhere deep down in the Library, updated versions for 10.5.4 and MobileMe. Somewhere along the line a combination of events triggered the tool bar to start blinking...
    It's strange how one user is fine (seldom used and DOES NOT have a MobileMe account) while the main one, me, is not fine (used heavily throughout the day and DOES have an active MobileMe account).
    At this point, I don't intend to re-install and start all over again (I've done this so many times with other machines over the years that I was hoping those days had finally gone based upon Apple's brilliant recent advancements).
    Any help or comments will be welcome.
    Cheers!

Maybe you are looking for

  • Is there a way to change the individual color (rgb) channels of a clip, like in the previous version of iMovie?

    I loved this feature in the older versions of iMovie for editing my underwater scenes to get ride of the greenish tint.  Now I only see a color temperature slider adjustment in the new iMovie, but that doesn't give me enough control.  Is there a way

  • Cme srst snr dial-peer hunt

    Hi, I have cucm 9 and cme 9 with srst on remote site. I have configured snr (mobility) and it was working fine. I have configured dial-peer hunt because I get a busy tone when the cucm is available and all phone are registered to the cucm instead of

  • How to create dynamic links in one page with div panels

    HI I am using Dreamweaver CS3 with developer toolbox. I have a PHP page where I have two separated tabbed div panels. I want to show dynamic summary of data from database in one panel. In the other panel I have a table with dynamic text. I want to cl

  • Myself, my iMac, and the bleeding edge of technology.

    Okie... As a producer and a new Macintosh user, I just about wet myself when these hit the stores. I scrape up some jangle and head to the Mac store, surrender my savings account to the cashier, and run home to set it up in my studio. I hadnt been th

  • I use Firefox as well as Safari, but Firefox runs slower,

    Firefox hangs pages, won't load pages ect. It does not do this all the time, but a fair amount of it. I do not have the same problem with Safari, so I am suspicious as to whether other browsers are less eefficient on my Mac by design so that I use Sa