Compaq presario laptop dv6109ea audio is not changing to headphone from internal speakers

hai when i installed windows in my compaq v6109ea laptop the audio is coming from internal speakers.when i want to talk to somebody is not changing to headphone speakers.please send me the solution

Hi:
Does your notebook have an Intel or AMD processor?
If it has an AMD processor, follow the instructions I posted at the link below for how to get the XP audio driver to work.
http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/multimedia-audio-controller-driver-for-wind...
If it has an Intel processor try doing the same thing but with this driver instead...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-44349-3&cc=us&dlc=en&lc=en&...
You would browse to: C:\SWSetup\sp28552\SMAXWDM\W2K_XP\smwdmATI, and select the SoundMAX Integrated Digital Audio device from the list.
There are no Vista or W7 drivers for the card reader (Base System Device), so try the XP driver. I think it will work.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-29677-1&cc=us&dlc=en&lc=en&...

Similar Messages

Compaq presario a933tu dvd writer is not working properly

compaq presario a933tu dvd writer is not working properly

Hi,
Please try this first:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My mac desktop will not provide sound from internal speakers. when I go to audio devices window it only shows airplay. How can I get internal speakers back.

My mac desktop will not provide sound from internal speakers. When I go to audio devices window it only shows airplay. How can I get internal speakers back.

There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store.

Envy laptop confused about aux jack being plugged/unplugged; no sound from internal speakers

So I was typing all normal like, didn't do anything stupid or weird, but suddenly the music I was playing through my laptop's internal speakers just stopped.
And despite nothing being plugged in the auxiliary jack, the laptop thinks something IS plugged in and doesn't play sound through the internal speakers. So no sound at all.
And on the flip side, when I plug headphones in the aux jack, the laptop says that "You have just unplugged a device from the audio jack" but then plays normally through the headphones. Internal speakers still silent.
It's like the laptop suddenly got confused in whatever component registers the auxiliary connection, but I don't understand why it still plays through the headphones when it thinks there is nothing plugged in. And also why the internal speakers don't work AT ALL.
It has Beats Audio, if that helps at all. I tried restarting, messing around with the sound settings but I honestly have no idea what I'm doing and anyways nothing has changed from that.
Anyways, yeah, help?
This is a pretty new laptop, only about a month old.

Hi @nematoda
Welcome to the HP Forums!
It is a fantastic place to find answers and tips.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you have lost sound on the internal speakers and when you connect headphones you get the message that you disconnected the device but then plays sound through the headphones.
Here is a link to No Sound from the Speakers (Windows 8) that may help to overcome this issue.
If this has not been resolved I recommend contacting HP support for assistance as the notebook is only a month old.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck !
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao.

Sound output: keeps changing from internal speakers to Apple TV

My iMac keeps changing the soudn output from internal speakers to Apple TV. Why. This makes it a pain. Eveytime I use the iMAc, I have to go into preferences>sound>output and switch to internal speakers. Any ideas how to stop this form happeneing?
Thanks!

If you use LogMeIn, it is their sound driver. I'm having identical problem and it started after using LogMeIn.
See this page;
http://community.logmein.com/t5/Free/Mac-restore-defaul-sound-output-device-on-d isconnect/m-p/88522/highlight/false#M8093

I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

1. Check the Side Switch
http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg
2. Double-click the Home button and swipe to the right and check volume control
http://i1224.photobucket.com/albums/ee374/Diavonex/ea5b842d.jpg
3. Settings>Notification>Game Center>Sound>ON
http://i1224.photobucket.com/albums/ee374/Diavonex/67a15edf.jpg

My iphone5 does not have any sound from the speakers ringtones or music any suggestions?

my iphone 5 does not have any sound from the speakers any suggestions on what culd be the problem and hopefully a fix

Just to add to this I can hear through the small speaker and the headphones it is just the speakers for ringtones and music etc

Compaq Presario P/N: KC49OUA, will not recover after pressing F11 at reboot.

Hi Everyone!
I Need help getting my Compaq Presario P/N: KC49OUA to go into Recovery when I press the F11 button at reboot. My brother installed Windows 7 Ultimate, upgrading from Windows Vista on the this laptop, and it turns out that HP is not supporting its needed drivers for Windows 7. So I would like to go back the OEM operating system, I see the recovery data on the the D: Presario_RP, Partition, but when I try to open the drive no files appear, although, 10GB out of 11.7 GB is used on the drive. How do I recover the Recovery Partition and get F11 to work, instead of it skipping the recovery process and then loading Windows 7?
Looking For a Solution,
Bill Pierce

Hi, Bill:
Normally, once another operating system is installed, the recovery partition no longer works.
You can't view the files on the recovery partition because it is an image file.
You may need a special program to be able to open and view the contents of an image file, which I am not familiar with.
The solution would be to order a set of recovery disks for your notebook.
Unfortunately, HP no longer carries them.
You can order a set from this vendor at the link below.
http://www.computersurgeons.com/productdetails.aspx?ID=6073
I am also surprised you can't get W7 to work on that model.
Most of the Windows Vista drivers should work fine.
What hardware are you having driver problems with?

Using Mountain Lion iOS and audio output will not change from internal speakers to AppleTV so that sound can come from TV speakers, why??

I am using Mountain Lion iOS and trying to connect my MacBook Pro to my plasma TV using AppleTV and AirPlay mirroring. The video does just fine. However, there is no audio coming from the TV. After activating AirPlay I try to select Apple TV as the audio output in System Preferences and it highlights it but then immediately goes back to Internal Speakers and only has sound coming from the MacBook Pro..
What's going wrong ?????
AJ

Are you sure that WIFI network doesn't have an AppleTV on it? Just because you don't own it doesn't mean there isn't one on that network. The laptop or better said the OS cannot differentiate between an AppleTV that you own or not. If it sees one on the network, it will show you one as being available. The automatic reconnection is happening probably because the last time you streamed to an AppleTV, you didn't drop that connection before sleeping the computer or shutting down iTunes.

Sharepoint Designer - Two step List Workflow task item is not changing the status from not started to Complete

Hi
Using SPD i am creating list workflow.
Scenario: Employee submits a request . Task assign to manager. Manager can either approve/ reject. If approve then change the state column to "done". If rejected the state column to "Rejected".
Problem is "Assign a to do item" is assigning the task to manager. But after manager approves the status in the task list not changed to "Completed". Still it is showing "Not started". I dont want to manually complete the task.
Please help me for automatic process.
What i should do to change the status to "Complete" automatically after manager approval
Regards
Jhanani
Janani.R

Hi Janani,
From your description, you would like to create an approval workflow for a list. When an employee submit a request to the list, an approval task should be assigned to manager, then manager could approve or reject the request. From the request list,
we should be able to see the Approval task’s status.
Not understand the reason of designing the workflow to two steps, an approval action should be enough from my understanding. For producing, I create a list named Request list, then customize it in InfoPath form to add a Request field for stating request
content. Then add a workflow to list named Approval task, add the action of Start an approval process with administrator and make the workflow automatically start when item is added.
The image below shows the status of Adding items, Approving and Rejecting. Please check if it could meet your requirement.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

PDDocSaveWithParams does not change PDF version from 1.8 (Acrobat 9, Acrobat X) to 1.4

Dear all,
this post seems similar to this discussion:
http://forums.adobe.com/message/1160826#1160826
but it is not.
Our customers prepare documents to be presented at regulatory authorities, and it is required that these documents have PDF Version 1.4, are linearized, etc. In a plug-in we change the document properties accordingly. This used to work fine with Acrobat versions from 6 to 9. Then came Acrobat X.
We detected the problem with a document created with Acrobat PDFMaker 10.0 for Word: a very simple 1-page 3-lines document with no Acrobat X features.
When using Acrobat X, after calling PDDocSaveWithParams, the PDF version was not changed as required. (We check this calling PDDocGetVersion from the plugin after saving.)
Doing the same conversion with Acrobat 9 seemed to be OK: PDDocGetVersion reported PDF Version 1.4.
But when opening the converted document in Acrobat X, it still reported "PDF Version: 1.7 Extension Level 8 (Acrobat X.x)".
Opening it in a text editor showed that the header was "%PDF-1.4", but it still had "<</Extensions<</ADBE<</BaseVersion/1.7/ExtensionLevel 8>>>>..."
With Acrobat 8 and below, the version could not be downgraded, but this was reported correctly.
Downgrading the version directly via the "Optimize" function of Acrobat X worked.
I could not test Acrobat 9, since I have no Professional version available.
In Acrobat 8 Prof, I saw the message "This file appears to use a new format that this version of Acrobat does not support.", and the "Optimize" function was disabled.
Now I have the following questions:
(1) Is it a known problem that PDDocSaveWithParams does not downgrade the version with Acrobat X ?
(2) Is it a known problem that PDDocSaveWithParams does not downgrade correctly with Acrobat 9 ?
(3) Is it a known problem that Acrobat9 wrongly reports the PDF Version of the document, in this case ?
(4) Why is downgrading (or optimizing) disabled for Acrobat 8 and below ?
Thank you !

Remember that as of PDF 1.4, the version number in the PDF header can be overridden via a /Version key in the /Catalog dictionary. In addition, the presence of an /Extension dictionary (ISO 32000-1) will also override the header version.
The header version is JUST A HINT - it is NOT a guarantee of any sort.
Based on both of the above, neither of your "bugs" are bugs.
Acrobat 9 (and I assume X as well) are reporting correctly. If you have a PDF that you believe IS being reported incorrectly, please post!
If the Extensions dict is present, the Save command will NOT override it since it takes precedence.

Headphones Not Recognized When Plugged in, Internal Speakers Won't Mute

Hi all, I've scoured these message boards looking for a solution to this problem, but couldn't find a solution that worked. Hopefully someone can!
Toshiba Satellite C655-S5312
Edition: Windows 7 Home Premium, Service Pack 1
Processor: Intel(R) Pentium (R) CPU B950@ 2.10GHZ
Installed Memory: 4.00 GB
System Type: 64-bit Operating System
The problem I'm having is that my computer won't recognize my headphones or any other external audio device when I plug them in. The internal speakers continue to play no matter what. I used the jack fine one night and the next morning it wasn't working. I've checked these external devices with other computers and they work fine. My computer is just over a year old and no longer under warranty, but I can't imagine it being a hardware issue after such a short time of use. I had this problem before right after I got my computer back from a repair shop. Turns out the guy didn't reinstall my drivers. Now, when I tried to follow those same steps, I'm getting nowhere. I can say that I noticed that the available drivers on the Toshiba website have changed. Before it was RealTek and now, after updates, it' was SmartAudioHD and now High Definition Audio Device. I don't know if that bears any significance, but I thought I'd include that anyway. I've tried uninstalling the driver, but everytime I restart my computer it's there under Audio Device Manager. Tech Support said that my comp automatically adds the driver so I'll never really get rid of it. Does that make sense?
Troubleshooting steps so far:
1.) Uninstall and reinstall drivers (restarted my computer after)
2.) Control Panel---> Device Manager---> Sound, Video Games and Game Controllers---> High Definition Audio Device (was SmartAudio before updating driver during troubleshooting)---->right click and "Enable" is checked
3.) Control Panel---> Sound---> Playback Tab (in Sound Dialog Box)---> Speakers (HDAD) green check mark but Headphones (HDAD) red downward arrow and "Not Plugged In" (Can enable or test because it's not detected)
Am I missing a driver? Am I missing a vital step? Please someone help me!
Solved!
Go to Solution.

If you are using Windows 7, go into control panel click on sounds and make headphones default. When you are not using your headphones you will have to do this procedure again to restore speakers on the laptop or computer. I am using Microsoft Gaming Headphones and had to do this because my toshiba laptop did not recognize it was plugged into the USB port. I have no problems with the plain speaker headphones only the ones that plug into the usb port.
Attachments:
headphones.JPG ‏74 KB

MacBook Pro: No Audio from Internal Speakers - Solution

Issue: (MacBook Pro late 2010) Absolutely no audio to internal speakers after OSX has booted up.
Digital Out is the only available output device shown within System Settings
Analog headphones work
Digital Out works
Bootup "BONG" works (and is of course now perma loud after PRAM reset... uggh)
Things I have tried from least drastic to greatest in the following order:
sudo killall coreaudiod
Clear PRAM
Using Deploy Studio (first performing DiskUtility format as well):
re-image MacBook with a the same original OSX Lion image it has been working with for the past 3 months
re-image MacBook with previous Snow Leopard image (obviously used to work)
Not using Deploy Studio (but first performing DiskUtility format, using original supported installation media: DVD, Apple Store):
Installed Snow Leopard (no audio), then upgraded to Lion through Apple Store (still no audio)
Installed Snow Leopard using installation DVD provided with MacBook Pro (< waste of time as the above step didn't work either, but including here for completeness)Note: Even the "Welcome to Mac" intro movie is silent, audio controls are crossed out
Gentoo Live DVD _works_ (after enabling Front Speakers using alsamixer other wise it was also muted and no audio would work except through head phones)
Well holly $%#$%, %^#&^. After performing step 5, and enabling Front Speakers using alsamixer, I now have audio in OSX Lion
I believe this happened after I used the Mini Stereo jack for Head Phone use.
How in the ______ did this happen? And why did it take a third party software to _somehow_ enable audio to the internal speaker _after_ OSX Lion completely booted?????
Note to all: You can probably use a Ubuntu Live CD to perform step 5. Or any live cd that loads up Intel Audio drivers.
Jason Miller

I appreciate your response. I still have concerns:
The red-lite is off when my issue is happening.
The red-lite is on when my issue is happening.
It was not consistent. My concern is the Macintosh operating system not detecting the change. My other concern is it can _not_ be only a hardware switching issue, as Alsamixer, a software program, can make the switch toggle between off or on. If it was a hardware-only issue, Alsamixer would be a fail. And, if it is actually a hardware-only issue triggering a software 1 or 0 switch somewhere:
My final concern is 'where is this setting being stored' as clearning PRAM and reinstalling entire operating system after opertating system (Leopard to Lion and back to Leopard) after a disk wipe has no effect.
I guess it sounds to me, that OSX tries to be too user-friendly by not allowing peeps to change those options themselves. Is there a dscl command switch I can use to manually override such an effect? (Just in case I don't happen to have anything to stick into the mini-jack port)
Regardless, your answer is correct. Thank you both (Ciao and Allan Jones)
Jason

No audio from internal speakers until headphones plugged in

This is for a Hp dv 6 with beats audio.I have no audio from the internal speakers until i plug the headphones in , when I get sound from both the internal speakers and the headphones.
I did find some people had the same issue which was resolved after changes in the realtek HD audio controller but I cannot find the audio controller on my laptop , which I am sure is different from the realtek audio drivers
I have already uninstalled and reinstalled the audio drivers without any success.
avi

Thanks avi,
Take a look at this document and let me know if the troubleshooting steps help to resolve your issue. Please let me know.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Compaq presario laptop dv6109ea audio is not changing to headphone from internal speakers

Similar Messages

Maybe you are looking for