Compaq Presario Media Center SR2030NX Desktop PC

can anyone help me. i have an older computer with windows xp. i don't understand about drivers on drivers update page.
  http://support.hp.com/us-en/product/Compaq-Presario-SR2000-Desktop-PC-series/3239110/model/3245038/d...
i do not know how to search the computer for the drivers form this page
my computer          model #SR2030NX         product#RJO36AA-ABA     serial#[edited Serial Number by Moderator]     software build#64NAemREA3
hardware BOM#)Onx141100        softward BOM#NA68       service ID#022-515
i also have the windows vista upgrade disks for windows vista on this computer
i am just trying to get this computer running right
piease help thank you for help nuvance

Thank you for the additional information.
The best thing to do is run HP Update if it is on your computer. I would normal tell you to run Windows Upate, also. However, Microsoft is no longer supporting Win XP. Also, you can go through the drivers in the Software & Drivers section and install any that have a later date than the release date of the computer (13-Aug-2006). Make certain that they match the hardware in your system before installing them.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

HP Pavilion Media Center m8200n Desktop PC Upgrades Tips and advice help.

Hello everyone I have a HP Pavilion Media Center m8200n Desktop PC that I'm looking to upgrade. Can anyone please advice me on the following topics:
Memory: What's the best possible memory that my system can hold I am currently running windows 7 ultimate 32-bits
Video card: I'm looking to upgrade to a decent video card with hdmi support that my system can hold I'm aware that i cant use certain video cards cause of my power supply capacity, upgrading the power supply can be a option. Can anyone please advice me on those topics It will be much appreciated thank you everyone I will be sure to rep and appreciate anyone's help thank you.
This question was solved.
View Solution.

Hi chavinda546,
No you can't put an Intel i7-960 chip into the motherboard in your PC. You would end up replacing the motherboard, memory, power supply and processor. And, your HP recovery disks would not work so you would probably need to buy a copy of Windows 7.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HP Pavilion Media Center m8200n Desktop PC/ recovery disks FAIL

I had to replace a crashed hard drive. BIOS shows that it recognizes the new drive. Can NOT boot system. Error message says disks (obtained upon purchase of computer) do not belong to this pc. What? I'm under the impression that it should not matter if this is a new hard drive.....the motherboard is what recognizes the recovery disks. Is it possible that I have the wrong disks? Or is this a big scam?

thekissfan wrote: I had to replace a crashed hard drive. BIOS shows that it recognizes the new drive. Can NOT boot system. Error message says disks (obtained upon purchase of computer) do not belong to this pc. What? I'm under the impression that it should not matter if this is a new hard drive.....the motherboard is what recognizes the recovery disks. Is it possible that I have the wrong disks? Or is this a big scam?
Hello thekissfan, Sometimes the HP Recovery Restore disk will not work on a new unpartioned and unformatted hard drive.
The hard drive would need to be prepared for the HP Recovery Restore disk.
The new hard drive would need to be partitioned, and formatted, and then the HP Recovery Restore Disk may work.
This is a fairly common issue. If your new hard drive came with a CD, you may be able to use the CD to boot the system and prepare the new hard drive.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

Replacing Motherboard on HP Media Center PC running Windows Vista Home Premium (32-bit)

Running OEM version of Windows Vista Home Premium (32-bit) on an HP Pavilion Media Center m8226x Desktop PC. Replacing motherboard ASUS M2N68-LA Motherboard 6150SE HP Narra2-GL8E with an MCP61PM-HM (Nettle2) motherboard due to failure. Both boards have same chipset and form factor. Can I just replace board without reinstalling windows? Do I need to install new drivers? I don't have an install CD or install key, would Microsoft provide a key if needed? Is there a link I can reference for MB replacement/ install?
Thanks for you assistance!
HC
This question was solved.
View Solution.

The OEM license is tied to the original motherboard version, ie M2N68-LA. You lose the OEM "rights" when you changed the board.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Monitor does not come on due to no input signal. Monitor is hp w2207. Hp media center pc m 260 N.

Desktop PC is connected correctly but monitor indicates no input signal & monitor goes to sleep mode. All my wireless laptops work ok. Does this have anything to do with wireless setup?

Although it appears the computer model name is incomplete, I assume you mean a HP Media Center m260n Desktop Computer. Here are the specs for your HP Pavilion w2207 LCD wide-screen flat panel monitor. The computer supports VGA only, unless you have previously installed an 8x AGP graphics card. The monitor supports both VGA and DVI-D.
The first step in troubleshooting this issue would be to connect the monitor to a known working computer using the same VGA cable. Does the monitor work??? Yes... could be the computer, No... could be the monitor or the cable. Next, connect the computer to another known working monitor with the same VGA cable. Does the monitor display a picture??? Yes, computer is good, No... computer or cable is bad. Post the results if you need more assistance.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How do I get fios to work with my new desktop w/ Windows Media Center

Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
** computer specs**
Product number NZ017AA
Introduction date 30-Jun-2009
Country/region sold in: United States,Canada
Hardware Base processor
Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
Chipset AMD 780G
Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
Power supply 300W
Memory
Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
4 GB* (4 x 1 GB) (32-bit OS)
*Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
Wireless Wireless LAN 802.11 b/g
Video Graphics Radeon HD4350
512 MB DDR2 memory
I/O Ports: HDMI, VGA, single-link DVI
Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
Sound/Audio High Definition 8-channel audio
ALC 888S chipset
Network (LAN) Integrated 10/100/1000 Base-T networking interface
Memory card reader
Contains an Infrared receiver for remote control
Supports the following cards:
Compact Flash I
Compact Flash II
IBM Microdrive
Secure Digital (SD)
mini-SD
MultiMediaCard (MMC)
Reduced size MultiMediaCard (RS-MMC)
MultiMediaCard Plus (MMC plus)
MultiMediaCard Mobile (MMC mobile)
Memory Stick
Memory Stick Pro
Memory Stick Duo
Memory Stick Pro Duo
SmartMedia
xD Picture Card (xD = extreme digital)
External I/O ports
I/O ports on the front panel
Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
I/O ports on the back panel
Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
Expansion slots
Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
Drive bays
Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

Based on what you've posted, your computer does not have the right tuner. You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
QAM tuners to record local channels only
This requires Windows Vista or Windows 7
Hauppauge WinTV-HVR-2250
SiliconDust HDHomeRun (info on a sale)
CableCard tuner to record local and cable channels
This requires Windows 7 + one CableCard from Verizon for $3.99/mo
ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
Make sure your computer has Windows 7 Home Premium (or better) installed. That's necessary to support CableCard tuners.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

My media center M8000y no longer completes boot sequence...I turn on the desktop and sometimes the b

HP Media Center M800y, System # GG755AV#ABA, Windows Vista Ultimate, Desktop will not complete boot sequence as the Blue & white HP screen which doesn't always appear, will give options to either
a).Press F10 to enter setup or,
b). to press f11 to start recovery partition in hard drive that doesn't work when tried.
Can enter setup when blue & white HP screen appears but do not know what to look for when inside.
If I pick none of the 2 options, the screen just turns black with a horizontal line "-" blinking at the upper left hand corner of the screen. Sometimes the screen will not even show the blue & white HP screen and it just stays black.
I changed the CMOS battery and nothing happened except that now the blue & white HP screen with the 2 options appears even less when I attempt to start up... I also tried using the recovery disks to no avail...
A power surge knocked out the power in my building and the computer suddenly stopped working while streaming netflix video afterwards... Then when attempting to re-boot once power was restored, The screen showed some very wierd, almost alien fonts on the top of the black screen that almost resembled Chinese or hyrogliphics. Upon further attempts to re-boot to no avail, I'm at a loss in diagnosing the possible causes or failure modes... Can somebody help me in the right direction???
I'm leaning towards either a corrupted bios via virus, or a fried hard drive or both. If you think something else or this has happened before and anyone knows a fix, I would be eternally grateful for your guidance in resolving this problem I'm experiencing.
Respectfully,
Henry

I would lean more to a hard drive problem.
A quick test is to temporarily disconnect the hard drive - the system should quickly indicate it can't find the HDD, can't boot, etc. You should also have the option to press one of the function keys to enter system BIOS.
If when you hook the drive up again - it starts getting flaky/slow again to do anything - you've likely found your culprit.
-DM (a long-time HP employee)
-DM (HP Retiree)
NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

How do I add a second video card to my Compaq Presario CQ5300F Desktop?

I want to install a second video card to my Compaq Presario CQ5300F Desktop so I can use two monitors. What card should I get?

Here are the specs for your Compaq Presario CQ5300F Desktop Computer. According to the specs, this model supports one VGA output via nVidia GeForce 6150SE onboard integrated graphics. This model also has a PCIe x16 graphics card expansion slot which will accept a PCIe x16 graphics card. According to the specs, installing a discrete graphics card in the PCIe x16 slot will disable the onboard integrated graphics.
The graphics card you purchase must support both monitors you wish to use with your computer. Additionally, most retail graphics cards require a 300 watt or greater system power supply. Currently , your computer has a 250 watt power supply and it will need to be replaced. Please consider the Corsair CX430, CX500, or CX600 series of power supplies to meet the new graphics card power requirements.
Alternatively, if this is mostly for word docs, spreadsheets, day trading and light video, you may wish to consider a USB-to-video adapter such as the eVGA UV Plus+ UV39 or one of the many other adapters on the market.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

All Ports/Plugins Do not work. Compaq Presario SR5233WM Desktop PC

Hello,I am here today With a problem of Mine that I can't seem to fix on my own.I have the Compaq Presario SR5233WM Desktop PC And I have Not used it In about 10-12 months And I have finnaly turned it on to Try and use it for some stuff and I plugged it in the wall And It starts up normally no beeping sounds or nothing.So After I did that I plugged the Blue video cord into my PC and my monitor And Before this I rememberd My USB ports wouldnt work And I could not test them out again because my video did not seem to work,I had asked around and They said something about my Drivers Need Resseting? I kept on Getting different answers when I ask so I came here. So to sum everything Up. How do I reset my drivers Without Video And/or What is the problem and how to fix it with the ports not working..Thanks for your time.

Hello again ZhayneW,
Thank you for the updated information on your issue. I would like you to try the steps I am providing you below in order until your graphics return:
Step 1. As you have tried different monitors I would like you to try different cables. The cables that go from your monitor to your computer could be the issue as well. According to the Compaq Presario SR5233WM Desktop PC Product Specifications page your computer has the IPILP-LC (Lancaster8) IPILP-LC (Lancaster8) and has following I/O ports with number 2 being a VGA connection and number 7 being the USB ports you state do not work. If you are using a VGA cord to connect your monitor to the computer that is the cord I would like to see replaced or swapped out with if possible. If you have already done this move on to the next step and ensure you let me know in your next post.
Step 2. Turn off the computer and unplug the power cord and open it up and place your had on the power supply for about 30 seconds to drain any electrical charge you may be holding. Now on the motherboard on the front (opposite the I/O connection indicated above) left hand side you will see the following jumpers:
These are the jumpers you need to use to clear the CMOS on your computer. Now on the off chance that your USB and Intergrated graphics have been disabled in the BIOS I am going to get you to clear the CMOS settings by moving the jumpers to look like the image below:
Leave the jumpers in this position for about 10 seconds and then return them to their original position. Reassemble the computer and do not plug it in until it is totally back together. If this was successful your computer should boot up and your display should be back.
Step 3. At this point the issue appears to be a physical issue and I think it would be best if you contact HP Technical Support for repair options. You could also go to a local computer repair and look to get it repaired as well.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Compaq Presario SR1330NX desktop. Black screen after restarting after recovery using disks

My Compaq presario SR1330NX desktop computer which has XP. Years ago I accidentally deleted the recovery partition. I ordered the recovery disks. I have done successful recoveries with them. Although it has been years. I did a recovery from disk. I dont think I did it correctly as it had been a while. Anyway, It never asked me for the 2nd disk, but it said the recovery was successful and to restart the computer. I thought that maybe it had made its own new recovery partition when using the disks before. So I restarted the computer and all I get is a black screen with compaq on it and some weird symbols in the left upper corner that look like
>triangle,Divide sign,Square,upside down t with a line under it,zero and a weird looking capital B".
And it does NOTHING. I put disks in it does nothing. This is the only screen that comes up and nothing else works. What did I do? and How can I fix this?

Hello tinkyferret, The HP Recovery Restore disk set makes a new Recovery Partition when they are used to recover the system.
You might try the HP Recovery Restore procedure from the hard drive, if you have not, and see if it wil complete successfully.
Normally on a Compaq system, you press the F-10 key to enter the Recovery Restore utility.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

How do i remove the hard drive from a compaq presario SR5319uk desktop

Hi I have a compaq presario SR5219UK desktop computer and i want to replace the hard drive but don't know how I have checked online and the videos that relate to compaq are not the same as my computer so I would be so grateful of any help i can get in a step by step run down on how to do this many thanks in advance

Here is the Manual which shows exactly how to do it.
Manual
See Page 17. You have to remove the front panel and go from there per the pictures.
If this is "the Answer" please click "Accept as Solution" to help others find it.

HP Media Center m7050y (PX153AV) CTO Desktop PC driver for card reader in windows 7

I have a HP Media Center m7050y (PX153AV) CTO Desktop PC that I've upgraded to Windows 7 Ultimate 32 bit. I'm trying to get my card readers driver. Is there one specifically for Windows 7, or is there one that worked with previous Windows editions that I should use?

PMurnane, welcome to the forum.
Since there are no Product Specifications for the computer, I don't know the brand of the card reader. Here is a driver for the Realtek card reader. If it doesn't work, let me know the brand of it.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Compaq Presario Desktop has beeping noise and will not boot

My Compaq Presario Desktop PC is making a beeping noise and will not boot. The SN# is CNX65112RS. Will someone please help me!!!
This question was solved.
View Solution.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph03886&lc=en&dlc=en&cc=us&lang=en&product=3352...

Require Help Obtaining Audio Driver for Compaq Presario SR1429UK desktop

Hi,
Really hoping someone can assist me obtaining the Realtek High Definition Audio driver for the Compaq Presario SR1429UK desktop.
I've obtained a second hand SR1429UK and it has been rebuilt but I have been unable to install the audio driver. I've tried downloading it from the compaq site but the sp26552.exe update driver which is available does not work and reports errors on installation. From the Compaq site, the only available driver is the update driver and there is no available download of the 'original' driver which is sometimes available for other models.
I've tried using the other SR1429 drivers (ES, FR, IT, NX etc) but they don't seem to be compatible.
I also don't have to the recovery disk or compaq application recovery installed as it's a clean WinXP Pro build.
ANy ideas where else I can obtain this driver?
Cheers, Jeremy

Hi,
It seems you are trying to download the driver update of the audio drivers. Please try downloading the original drivers from the following weblink:
http://h10025.www1.hp.com/ewfrf/wc/genericSoftwareDownloadIndex?cc=us&dlc=en&lc=en&softwareitem=pv-2...
Hope this information helps.
Regards,
Vidya
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Compaq Presario SR1000 Desktop PC - Help for Audio Drivers

Hi
I have one Compaq Presario SR1000 Desktop PC, in which I am using Windows XP operating system.
I am unable to install audio drivers. I have downloaded the drivers from the HP- website and installed on this pc.
Still audio is not cming.
I have also changed the onboard audio in BIOS from Auto to Enabled, still there is no audio.
I am not using any graphics card in this pc and using normal speakers or head phone.
The PC has PCI Express mother board in it.
Please help me to get audio from this pc.
Thanks in advance.

Hi:
Which specific model SR1000 do you have?
http://h10025.www1.hp.com/ewfrf/wc/pfinder?cc=us&lc=en&query=SR1000&tool=s-002&dlc=en#N51

Compaq Presario Media Center SR2030NX Desktop PC

Similar Messages

Maybe you are looking for