Compaq Presario SR1235IL Installation Problem

Sir,
I am using Compaq Presario SR1235IL Desktop PC from last few years. Present Display Chip problem in Mother Board I have install new Display Card, After install the Display Card trying to system is install new OS, but, after coping the system files and restart the system, second step of coping files is not opening automatically system is shown blank screen so many times trying to install OS same problem repeat. Please send the how to format the desktop PC, If any changes of BIOS pls send the details.

Hello seinus. I understand you're trying to reinstall Windows on your computer.
Are you trying to install via a Windows installation disc?
If you're trying to perform the recovery with a disc I suggest trying the F11 method. Try these instructions to perform the F11 recovery.
If this also fails I think it is going to be a good idea to test your hard drive for problems. You can use the built in diagnostics to check the hard drive. This document has instructions. Please make sure to post the results.
If this is helpful or you want to say thanks make sure to click the white star under my name to give me Kudos. It is greatly appreciated.
I'll be keeping an eye out for the results of these suggestions. I hope you have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Similar Messages

Compaq Presario CQ56-115DX Problems

Hello,
I have a Compaq Presario CQ56-115DX Laptop. It is still under warranty. Within the last week the power of the laptop has been messed up. When I have the laptop unplugged, which I don't very often, the laptop shuts down after an hour without any warning. So I plug back in the laptop and it still shows anywhere for 40-70 percent battery left. Why is it doing this?
Thanks

Hi,
First of all, shut down the notebook, unplug the AC Adapter, remove the battery, and then hold down the Power button for a full minute.
Now, plug in the AC Adapter without the battery inserted, start the notebook, open windows Control Panel, open Device Manager, expand the entry for Batteries, right click on and the Microsoft ACPI Compliant Control Method Battery and select Uninstall - do not uninstall anything else here. When the uninstall is complete, shut the notebook down, unplug the AC Adapter, re-insert the battery and then start the PC on just the battery. Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the PC again. Now plug in the AC Adapter ( with the battery still inserted ) and start the notebook to see if this has helped the issue at all.
If the above has not helped, download and run the stand-alone battery test utility available on the page below and see if this reports any problems with your battery.
http://h20239.www2.hp.com/techcenter/battery/battery_ts.htm
If this reports a problem with the battery ( or even if it doesn't, but the problem is still occuring ), contact HP and arrange to have the battery replaced/notebook repaired under warranty.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Compaq Presario CQ60-112LA: Problems with the wireless

Hello!!! :D:D:D:D
I send my greetings to the community.
I want to write 2 things before to tell you about my problem:
1. I'm sorry for my English, It isn't so good.
2. I'm Newbie in Arch Linux but not in GNU/Linux (I'm not an expert ) and I've read the wiki and Forum Etiquette (http://wiki.archlinux.org/index.php/Forum_Etiquette).
I installed Arch Linux in my laptop, it's a Compaq Presario CQ60-112LA and It had installed Madriva Linux but I wanted to have more control on my computer and I decided to install
I followed the wiki's instructions and I could install Arch Linux correctly but I have a problem. I can connect to Internet by wireless, I haven't got wired access and I followed this instructions:
(http://wiki.archlinux.org/index.php/Wir … _available)
I could bring up the interface
#ifconfig wlan0 up
#iwconfig wlan0 essid "BTHome..." key ABCDCD
dhcpcd wlan0
dhcpcd: version X.X.X starting (I don't remember the real version, In this moment I'm sending this post from Mandrivas' Livecd)
dhcpcd: wlan0: waiting for carrier
dhcpcd: timed out
I tried to connect manually with static ip but I couldn't. I don't know what can I do. I can't continue without Internet, because I can't update my system and I can't install Kde4 ..
I did this one:
#modprobe -r ath5k
modprobe ath_pci
But I didn't find any wireless interface, In Mandriva ath_pci works better than ath5k module, but I can't up ath_pci module..
Thank you very much for your help... And I apologized again for my english...

HI;
The easiest thing to do is to spray canned air into the vents by the fan and heat sink. If a lot of dust comes out, that will probably take care of the issue. If no dust comes out, then you have other issues causing overheating and thermal shutdown. Take care not to overspin the fan blades when you blow the air into it.
Paul

Compaq Presario C571NR Audio Problem

Ok, Vista was on my laptop when I bought it. I have a Compaq Presario C571NR. Downgraded it to XP after I did all of the research for the drivers. Worked great. I now have upgraded to Windows 7, I love it. Onlyl problem is that the speakers pop when I power down my laptop and my quick launch buttons do not work. Help.

Hi,
Uninstall Your currect HP Quick Launch Buttons version.
Resource:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
Install this one:
HP Quick Launch Buttons here (ver 6.50.13.1 for 32/64 bit Win7)
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Compaq presario cq56 keybaord problems (win7 x64)

Hi. i got a presario cq56, and the keyboard isnt working. no keys work. the caps lock light doesnt light up when you press the button. its almost as if the keyboard is dead but im pretty sure the keyboard is perfectly fine. i tried taking apart the laptop and reconnecting the keyboard but it still doesnt work. help?? please??

Hi Kline9000,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your Compaq Presario CQ56 Notebook and keyboard issues. Here is a link to uninstall the keyboard. Restart the computer after uninstalling, it should reinstall automatically.
Let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Compaq Presario CQ70 Screen Problems Advice Please

hi guys I have a Compaq Presario CQ70 and the screen keeps flickering on and off when I move the top of the laptop backwards and forwards (see photo below) has anyone seen this before as its happened on my dads laptop as well (same laptop) so got 2 of them to try and fix lol must be a fault with this model I think.
any help would be great thanks
This question was solved.
View Solution.

This should work. http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=da&cc=dk&dlc=da&sw_lang=&product=3816... . Hent it and opdater your Computer in windudws opdate

Compaq Presario C751NR Battery problem

My Compaq Presario C751NR with VISTA 32-bit shuts off after 5 min. on battery power but runs all day on ac power. When I run a battery check it says no main battery detected. It's not on the recall list.
THANKS
This question was solved.
View Solution.

Sounds like the battery needs to be replaced, how old is it?

Installation problems in Compaq Presario V2617LA Laptop

Hello,
I am new in all of this Unix-Linux world and I need some help, here's my problem:
I have already partitioned and prepared my HDD to install Solaris, Windows and maybe Fedora (if someone recommends a better Linux it'll be appreciated), all of those three partitions perfectly identified and ready for the OS (it happens that I learn quickly, but I'm still new on this). I perfectly pass all Solaris 10 11/06 installation windows and requirements and Solaris begins installation, BUT when it all looks great, the installation (progress bar) just stops moving having 209.29 MBytes remaining and installing the 'Solstice Enterprise Agents 1.0.3 files for root file system', the wierdest thing is that the little slash-dash at the end is still turning around, the working processor light is on and nothing freezes (except when I navigate through the menu options), I have waited for a whole day and the installation does not finish and even re-downloaded Solaris and burn the image again two times and nothing.
Could it be a hardware compatibility problem? What do you think?
My Laptop specs are the following:
Product Name      Compaq Presario V2617LA
Product Number      EW998LA#ABM (Spanish version)
Microprocessor      1.8 GHz Mobile AMD Sempron� Processor 3000+ with PowerNow!� Technology
Microprocessor Cache      128KB L2 Cache
Memory      512 MB 333 MHz DDR Dimm 2
Video Graphics      ATI RADEON XPRESS 200M IGP
Video Memory      128MB DDR (shared)
Hard Drive      60 GB 4200RPM
Multimedia Drive      DVD�R/RW and CD-RW Combo Drive with Double Layer support
Display      14.0� WXGA High-Definition BrightView Widescreen Display (1280 x 768)
Fax/Modem      High speed 56K modem
Network Card      10/100BASE-T Ethernet LAN (RJ-45 connector)
Wireless Connectivity      54g� 802.11b/g WLAN with 125HSM SpeedBooster support
Sound      Internal Speakers
Keyboard      101 key compatible
Pointing Device      Touch Pad with On/Off button and dedicated vertical and horizontal Scroll Up/Down pad
PC Card Slots
* 1 Type I/II 32-bit card bus (also support 16-bit)
External Ports
* 2 USB 2.0
* 1 VGA (15-pin)
* 1 RJ -11
* 1 RJ -45 (LAN)
* 1 headphone-out
* 1 microphone-in
* TV-Out (S-video)
Power
* 65W AC adapter
* 6-Cell Lithium-Ion (43Whr)
Thank you in advance!!

I `m sure that i completely uninstall it from the 1st laptop..
I don`t want to sight out from my desktop,the 1st laptop is in an...other country. [of course a friend of mine have it]
I mail to him to try to uninstall any files or something from there..
if i solve the problem i install to 2nd laptop

Compaq Presario CQ40-327TU Notebook PC Display problem

Hi,
My product is Compaq Presario CQ40-327TU Notebook PC originally with Windows XP edition. Recently I installed Windows 7 in my laptop from USB pen drive. Installation went fine, but it does not ask for C drive format. I installed in the C drive where Windows XP installed previously . After installation of my laptop working fine. Some times the screen goes blank (black) and come back after few minutes and in notification area it shows "Display driver Intel Graphics Accelerator Drivers for Windows 7 (R) stopped responding and has successfully recovered." like that I am getting a notification. In my system information, I checked it shows Windows 7 in OS. It happens only when I toggle to different windows or applications. I checked display adapters in device manager and it shows "Mobile Intel(R) 45 Express Chipset Family (Microsoft Corporation - WDDM 1.1)" . When I tried to update display adapter it showed already uptodate. Can I expect some solution for my problem here. Also after OS installed I found Windows.old folder in C drive. Can I removed that folder?
Thanks in advance.
Regards,
Venugopal

This is NOT official HP Customer Support and I, as most other persons on this forum, do not work for HP. This is a peer-to-peer user supported forum for HP consumer class products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's.
It appears that your computer meets the minimum requirement for installing Windows 7. Please download and run the Windows 7 Upgrade Advisor to confirm this before attempting to install Windows 7.
Based on the specs for your Compaq Presario CQ40-327TU Notebook, this model shipped from the factory with Windows Vista installed. Here is the Compaq Presario CQ40-327TU Notebook PC Drivers page for your computer. HP has provided only Windows Vista drivers for your computer.
You should be using the current BIOS version before upgrading to Windows 7.
Please see the General Windows 7 Upgrade Guide for HP Laptops by CherylG for specific steps to be taken when installing Windows 7 on your computer. This guide will also direct you to the proper drivers needed for your computer to function completely under Windows 7. Please refer to "Part 1 - Models Level 1" for information specific to your model.
Please use Intel® Graphics Media Accelerator Driver, Windows 7*, Windows Vista* (exe) for a 32-bit OS and Intel® Graphics Media Accelerator Driver, Windows 7* 64, Windows Vista* 64 (exe) for a 64-bit OS. And YES, you can delete the "Windows.old" folder.
Please post the Windows Device Manager's "Hardware Ids" for any additional missing or unknown devices on your computer, as shown in the example below;
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

\problems with a compaq presario sr1603wm

troubleshoot problems with a compaq presario sr1603wm
whenever i turn on the computer the mouse, keyboard, and the monitor doesnt turn on. but the weird part is that when i use the 2-port usb KWM switch and switch them over to my other pc unit they work just fine. to make things worse my external hard drive, and the net card are showing that they have power going through them. im totatally lost cause i cant even get into dos, bios, or the start up screen. other monitors, keyboards, mouses dont work either. can you help me

i`ve narrowed down to1 thing wich may overheats my laptop:
The video card NVIDIA GeForce G103M might be the problem. i hear it has a kind of organic material , like glue, or other things wich keeps it togheter. this organic materials are not ment to resist to heat, wich makes them weaker. The temperature rises very quick, and the laptop performace goes down, when i start games or other video applications. so it must be the NVIDIA GeForce G103M. still whaiting for advice, or an ideea. thanks.

Compaq presario problems with vista

Hello, I am having major problems with our compaq presario sr5233wn desktop, os windows vista home premium. It started shutting down about ten days ago randomly, then started with a blue screenthat has displayed different messages... I have completed 6 different restore points and this didn't work... I then backed up my personal files and performed a complete system recovery installed on the pc...it worked great for about half an hour then the freaded blue screen popped up and I had to shut it down...i did this three times to no avail...then I did a complete recovery from the two discs I made shortly after purchase...that has not worked either...does anyone out there have a fix for this..I need my ole puter.
Thanks Elmer

Hi Elmer,
Sounds like the first thing you need to do is test for a hardware failure. Check out Testing for Hardware Problems Using Hardware Diagnostic Tools (Windows Vista) and since it sounds like you are having problems running Windows for very long, skip to the bottom to the section called Using Hardware Diagnostic Tools when Windows does not open. Run the tests and report back what you find, if anything fails then there is probably a hardware component that needs replaced, possible culprits include the memory or the hard drive based on the symptoms you are describing. If everything passes, post that back as well, and let us know, and we can look for other causes of your problems.
Good Luck!
R
Although I am an HP Employee, I am speaking for myself and not for HP.

Compaq Presario CQ71-420SM booting problems

Hi,
i have problem with Compaq Presario CQ71-420SM.
Laptop wont start.
Checked power adapter (green - constant) light is on. Checked on laptop where power adapter enters laptop (white constant) light is on. Changed power adapters. Tried with and without battery inserted same result.
Removed the ram that is left one module than replaced it with second, tryed to change slots with both modules. no result.
Laptop be it on battery or without one but with power plugged in needs about 10 sec to eaven spin cooler/s and promptly shuts down - blank screen all the time.
Now ONLY when battery and power adapter is in i get white led flashes (led located lower left from touchpad - not the one near where i plug in power cord) in following durations:
- = short duration of led light
-- = normal duration of led light
--- = long duration of led light
1) -- -- -- -
2) -- -- -- --
3) -- -- -- ---
than fiew moments pause and all over again
i have read somewhere that this is most likely vga failure now can You please verify this for me or give me valid info on what can it be or what should i look for?
i have looked for error codes on fiew laptops, could not find specialy for this one but this is one of the links
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443366&lc=en&dlc=en&cc=uk&lang=en&rule=26781&...
the error led codes as i noticed are all the same for links that i have found.
greetigs,
ivan

Hi,
thank You for quick response.
can you tell me what you opinion is if mob has gone bad is it worth the trouble/cost to send laptop to repairs or just buy a new laptop considering that laptop is 3+ years old.
regards

Problem with Compaq Presario V6000 laptop

Hi forum members! I am a newbie to this forum and i would like to introduce myself, my name is Hammy and I am from Glasgow. I have a problem with my laptop whih is a Compaq Presario V6000 running windows Vista, 32 bit product number V6254EA.
A few weeks ago when i turned on the computer it failed to boot up, the only thing visible on the screen is the bar at the bottom of the screen with `Microsoft Corporation` displayed below it.
I have tried starting it up in SAFE MODE but all that happens is that a certain amount of windows system drivers are loaded and then goes no further!
I have purchased recovery discs with no joy! I have also tried a hard reset which has not solved the problem. I tried the `hard drive self test, which after approx 30 seconds carrying out a quick test displayed the following message #1- 07 Fail.
If it is the hard drive or the motherboard that has failed is it possible to replace them.
Thanks

Did you burn the recovery disks? Will follow up with the manual and a link to buy the hdd.

Touch pad problems on Compaq Presario C56

Hi,
1st time poster here, so I hope I'm in the correct forum for this.
I recently purchased a Compaq Presario C56 with Windows 7, and already the mousepad/touchpad is developing problems in that it is quite slow and sometimes fails to respond to any touch from the finger tips. It is noticeably worse when the using the laptop when the battery is charging.
I have installed the latest drivers for the touchpad, and in terms of other software that I have installed, I have AVG free running and a few other applications installed such as Blackberry Desktop software, Google Chrome, Microsoft Office.
Is there any know issues similar to this with the touchpad?
Thanks

try this bro..
click start>on search column type "service">choose services> then windows will ask your permission.. click continue..>
then search for audio service..> press a right-click..> choose restart> then audio service will do a restart..
promblem is solve.. hhe
for question add my ym.. [email protected]

Sound Problem in Compaq Presario CQ40-108TU

I've Transcend 2GB DDR2 667 memory and put it in my laptop (Compaq Presario CQ40-108tu). It read the whole 4GB memory coz I'm using Windows Vista Ultimate 64-bit but it doesn't have an audio. I've try to troubleshoot it, first try it with only 2GB memory and it does have audio. Then i try it with 3GB memory and it has a audio. Then i try switch the other 2gb memory and repeated what I've done and it does have an Audio. Then i've try again with 4GB but it really doesn't have audio/sound.
If you know the how to fix this problem please help me...thx

Hello please anaszen777,
Please take a look at this page, which contains troubleshooting steps to determine the cause of your issues.. Please let me know if it helps.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Compaq Presario SR1235IL Installation Problem

Similar Messages

Maybe you are looking for