Compaq Presario SR1330NX desktop. Black screen after restarting after recovery using disks
My Compaq presario SR1330NX desktop computer which has XP. Years ago I accidentally deleted the recovery partition. I ordered the recovery disks. I have done successful recoveries with them. Although it has been years. I did a recovery from disk. I dont think I did it correctly as it had been a while. Anyway, It never asked me for the 2nd disk, but it said the recovery was successful and to restart the computer. I thought that maybe it had made its own new recovery partition when using the disks before. So I restarted the computer and all I get is a black screen with compaq on it and some weird symbols in the left upper corner that look like
>triangle,Divide sign,Square,upside down t with a line under it,zero and a weird looking capital B".
And it does NOTHING. I put disks in it does nothing. This is the only screen that comes up and nothing else works. What did I do? and How can I fix this?
Hello tinkyferret, The HP Recovery Restore disk set makes a new Recovery Partition when they are used to recover the system.
You might try the HP Recovery Restore procedure from the hard drive, if you have not, and see if it wil complete successfully.
Normally on a Compaq system, you press the F-10 key to enter the Recovery Restore utility.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.
Similar Messages
-
MacBook Pro with Black Screen at restart after apple logo
Hi,
My MacBoock Pro get a black screen with the arrow working after restart. At restart works the chime, the apple logo but after that instead of login screen appears a black screen with the mouse arrow. Sound works, bright works but nothing. I had testing all the comands to restart: Cmd+Alt+N+V, Cmd+Alt+P+R, Shift+S, S, D, Shift+S, Shift+Ctrl+Alt+Start... reinstalling without format... everithing. What can i do without rainstall from 0?
ThanksBlank (lighted, but black) screen with cursor at bootup
[SOLVED] - Macbook Air Sleep/Wake problem
Dark screen on start-up can only see curser -
MBP Black Screen on restart after software update
Hello to all, Just after dowloading today's latest updates, iTunes, Safari, something about file exchanges and Apple remote I beleive, there needed to restart and once done, no chime and black screen...
All was perfectly fine just before, and I did backup beforehand.
Tried to reset PRAM, restart in Single user, Safe mode, Installation Disk, all with no success.
I will let it powered off and let it cool down for a while if it can help, but it was not particularly hot when restarted.
Any other suggestions ??
Many thanks !!I'm having basically the same problem with my PowerBook 1Ghz Aluminum 17". After running the latest security update and latest iLife patches using SU, my system boots to the local Darwin consol login. I can see my HD and all it's files, but I can't get the machine to boot back into GUI mode. Safe mode doesn't work.
This was a newly refreshed system running 10.4.6 and ONLY iLife installed - nothing funky and no 3rd-party apps other than those pre-installed in 10.4.x.
I've booted with the 10.4 DVD, repaired permissions (again) and repaired the drive (reported not needed). Zapping the PRAM doesn't help.
Perhaps I have a lemon because I have had problems with this machine in the past, but only when installing major system updates between 10.3-10.4 with non-apple RAM. I don't think this is the culprit this time as the machine has been functioning fine since the last fresh 10.4 install (with some OWC RAM).
Any ideas? Anyone have tips for what can be done in the console to repair the system?
ARGH
PM G5-Quad 2.5GHz | eMac G4 1.25GHz | PM G4 800MHz | PB G4 1GHz 17 | PM G4 400MH Mac OS X (10.4.5) -
PPC-iMac: Black screen on restart after Security Update 2006-003
Did the Security Update 2006-003 this morning. On restart the screen is showing the grey Apple-logo for several seconds. Then it goes black, with the prompt in the upper left corner: "localhost/root:" Vent running in high gear. Entering unix-commands is possible, but no graphic interface coming up. How to fix this? Don't want to reinstall the whole system.
iMac G5 20" PowerPC iSight Mac OS X (10.4.6)I'm having basically the same problem with my PowerBook 1Ghz Aluminum 17". After running the latest security update and latest iLife patches using SU, my system boots to the local Darwin consol login. I can see my HD and all it's files, but I can't get the machine to boot back into GUI mode. Safe mode doesn't work.
This was a newly refreshed system running 10.4.6 and ONLY iLife installed - nothing funky and no 3rd-party apps other than those pre-installed in 10.4.x.
I've booted with the 10.4 DVD, repaired permissions (again) and repaired the drive (reported not needed). Zapping the PRAM doesn't help.
Perhaps I have a lemon because I have had problems with this machine in the past, but only when installing major system updates between 10.3-10.4 with non-apple RAM. I don't think this is the culprit this time as the machine has been functioning fine since the last fresh 10.4 install (with some OWC RAM).
Any ideas? Anyone have tips for what can be done in the console to repair the system?
ARGH
PM G5-Quad 2.5GHz | eMac G4 1.25GHz | PM G4 800MHz | PB G4 1GHz 17 | PM G4 400MH Mac OS X (10.4.5) -
G5 won't start up (black screen saying restart) after installing new memory
I have installed two new memory cards and removed the original and now my computer starts to start up - But then locks with a gray overlay and says restart - which you can only do by a hard start.
The trick with installing memory is that you have to PUSH harder than you can possibly imagine, so hard that you think you will damage the RAM, but you won't. Keep pushing till you hear a click.
-
MBP restarting after sometime automatically,initially shows black screen then restarts automatically?
this is happening all of sudden now?Interval Since Last Panic Report: 5 sec
Panics Since Last Report: 1
Anonymous UUID:
Sat Apr 6 03:00:26 2013
panic(cpu 2 caller 0xffffff7f84f957f2): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff8080fc1000 0x0a5480a2, D0, P3/4
Backtrace (CPU 2), Frame : Return Address
0xffffff8080bbaf80 : 0xffffff800481d626
0xffffff8080bbaff0 : 0xffffff7f84f957f2
0xffffff8080bbb0b0 : 0xffffff7f850923b9
0xffffff8080bbb110 : 0xffffff7f8509242e
0xffffff8080bbb180 : 0xffffff7f853b8c82
0xffffff8080bbb2b0 : 0xffffff7f850b8fe8
0xffffff8080bbb2f0 : 0xffffff7f84f9d567
0xffffff8080bbb3a0 : 0xffffff7f84f9b05a
0xffffff8080bbb5a0 : 0xffffff7f84f9c983
0xffffff8080bbb670 : 0xffffff7f8601a790
0xffffff8080bbb730 : 0xffffff7f86045f98
0xffffff8080bbb7b0 : 0xffffff7f8602d308
0xffffff8080bbb810 : 0xffffff7f8602dbe9
0xffffff8080bbb860 : 0xffffff7f8602e09b
0xffffff8080bbb8d0 : 0xffffff7f8602e8d1
0xffffff8080bbb910 : 0xffffff7f85ffa34f
0xffffff8080bbba90 : 0xffffff7f8602ae39
0xffffff8080bbbb50 : 0xffffff7f85ff8de8
0xffffff8080bbbba0 : 0xffffff8004c650c9
0xffffff8080bbbbc0 : 0xffffff8004c66670
0xffffff8080bbbc20 : 0xffffff8004c6408f
0xffffff8080bbbd70 : 0xffffff80048984a1
0xffffff8080bbbe80 : 0xffffff8004820aed
0xffffff8080bbbeb0 : 0xffffff8004810448
0xffffff8080bbbf00 : 0xffffff800481961b
0xffffff8080bbbf70 : 0xffffff80048a5dd6
0xffffff8080bbbfb0 : 0xffffff80048cdd43
Kernel Extensions in backtrace:
com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f84f38 000->0xffffff7f85245fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f84ea3000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f84f24000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f84ee1000
com.apple.nvidia.nv50hal(8.1)[5F021999-8B18-3BD5-9B98-90617E638A63]@0xffffff7f8 5253000->0xffffff7f85574fff
dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f84f 38000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f84ea3000
com.apple.GeForce(8.1)[A15BB65E-3501-340F-87CB-2FD2BAD33E35]@0xffffff7f85fe7000 ->0xffffff7f860b3fff
dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f84f 38000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f84f24000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f84ea3000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f84ee1000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide: 0x0000000004600000
Kernel text base: 0xffffff8004800000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 2850698695318
last loaded kext at 22285094662: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f86293000, size 32768)
last unloaded kext at 230795989184: com.apple.driver.AppleUSBUHCI 5.2.5 (addr 0xffffff7f8582e000, size 65536)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.12.87
com.apple.iokit.IOBluetoothSerialManager 4.1.3f3
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleIntelHDGraphics 8.1.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.GeForce 8.1.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMikeyDriver 2.3.7fc4
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.driver.ApplePolicyControl 3.3.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelHDGraphicsFB 8.1.0
com.apple.driver.AppleLPC 1.6.0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMuxControl 3.3.0
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.SMCMotionSensor 3.0.3d1
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleUSBCardReader 3.1.7
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.iokit.SCSITaskUserClient 3.5.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AirPort.Brcm4331 614.20.16
com.apple.driver.AppleAHCIPort 2.5.1
com.apple.driver.AppleUSBHub 5.5.5
com.apple.iokit.AppleBCM5701Ethernet 3.6.0b1
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.7fc4
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.3f3
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.nvidia.nv50hal 8.1.0
com.apple.NVDAResman 8.1.0
com.apple.driver.AppleHDAController 2.3.7fc4
com.apple.iokit.IOHDAFamily 2.3.7fc4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.IOPlatformPluginFamily 5.3.0d51
com.apple.kext.triggers 1.0
com.apple.driver.AppleGraphicsControl 3.3.0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.AppleSMC 3.1.4d2
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5
com.apple.iokit.IOUSBMassStorageClass 3.5.1
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.5.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 522.4
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOUSBUserClient 5.5.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.5.5
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.2
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.53 GHz, 4 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500325ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 5
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 7
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3 -
All Ports/Plug​ins Do not work. Compaq Presario SR5233WM Desktop PC
Hello,I am here today With a problem of Mine that I can't seem to fix on my own.I have the Compaq Presario SR5233WM Desktop PC And I have Not used it In about 10-12 months And I have finnaly turned it on to Try and use it for some stuff and I plugged it in the wall And It starts up normally no beeping sounds or nothing.So After I did that I plugged the Blue video cord into my PC and my monitor And Before this I rememberd My USB ports wouldnt work And I could not test them out again because my video did not seem to work,I had asked around and They said something about my Drivers Need Resseting? I kept on Getting different answers when I ask so I came here. So to sum everything Up. How do I reset my drivers Without Video And/or What is the problem and how to fix it with the ports not working..Thanks for your time.
Hello again ZhayneW,
Thank you for the updated information on your issue. I would like you to try the steps I am providing you below in order until your graphics return:
Step 1. As you have tried different monitors I would like you to try different cables. The cables that go from your monitor to your computer could be the issue as well. According to the Compaq Presario SR5233WM Desktop PC Product Specifications page your computer has the IPILP-LC (Lancaster8) IPILP-LC (Lancaster8) and has following I/O ports with number 2 being a VGA connection and number 7 being the USB ports you state do not work. If you are using a VGA cord to connect your monitor to the computer that is the cord I would like to see replaced or swapped out with if possible. If you have already done this move on to the next step and ensure you let me know in your next post.
Step 2. Turn off the computer and unplug the power cord and open it up and place your had on the power supply for about 30 seconds to drain any electrical charge you may be holding. Now on the motherboard on the front (opposite the I/O connection indicated above) left hand side you will see the following jumpers:
These are the jumpers you need to use to clear the CMOS on your computer. Now on the off chance that your USB and Intergrated graphics have been disabled in the BIOS I am going to get you to clear the CMOS settings by moving the jumpers to look like the image below:
Leave the jumpers in this position for about 10 seconds and then return them to their original position. Reassemble the computer and do not plug it in until it is totally back together. If this was successful your computer should boot up and your display should be back.
Step 3. At this point the issue appears to be a physical issue and I think it would be best if you contact HP Technical Support for repair options. You could also go to a local computer repair and look to get it repaired as well.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
X505 Q880 Black screen auto-restarts in Game
Hi everyone! I got this laptop X505 Q880 a couple of months ago and it was all wonderfully working fine until a week ago where it randomly restarts during a game. No warnings.. Nothing.. Just goes to a black screen and restarts with the unexpected shut down error after the restart. I have looked everywhere on the forums and I see a lot of "similar" problems with different "solutions" posted. Even though I haven't found anything on this particular model (the X505 Q880) I have tried many ways of fixing it but to no avail. I have guessed it's a big problem for many and it seems that even different models have this problem.
It restarts by it self without any warnings. Like some posts it doesn't have any error messages... I don't need to press the power button (as it turns back on) It restarts in 5 mins in to all the games I play. It only restarts when it's plugged in the AC. When I play on battery power it will run perfectly fine until it drains the battery power. I hear it's a problem with the graphics card, or it's the motherboard, or it's a driver problem, or something to do with the AC adaptor.
But which one is the real the problem??!?! And is there anyway I can fix it myself? Because I have just moved across the sea to a whole new country where I can't contact the Toshiba Customer Services.. And this cost me more than my plane tickets.... And I can't afford to buy another one...
Someone please advise me, and hopefully there is a solution out there somewhere... That actually works...
Kind regards,
Luimarceloaziz wrote:
http://laptopforums.toshiba.com/t5/Qosmio-Laptops/Another-overheating-Qosmio-X505-880-problem-need-h...
Take a look at this topic
There is more people having same problem.
Aziz
Yeah I see, it's good to know I'm not the only one.... Muahahaha...
Nah, it's not funny. What a waste of money....At least money can be replaced...
But what f***** waste of precious time...
I've arranged to repair it tomorrow at a repair service place here in London recommended by the Toshiba guys here. Even though I bought it in the States it has a Limited International Warranty so should be good. Will post up after the repair and hopefully find a solution for others IF they can fix it that is. Fingers crossed.
Otherwise any new breaking news? Solutions? Or anything? Anyone?
Is there actually someone who has X505 Q880 that still works fine? I wonder....
- Lui -
How do I add a second video card to my Compaq Presario CQ5300F Desktop?
I want to install a second video card to my Compaq Presario CQ5300F Desktop so I can use two monitors. What card should I get?
Here are the specs for your Compaq Presario CQ5300F Desktop Computer. According to the specs, this model supports one VGA output via nVidia GeForce 6150SE onboard integrated graphics. This model also has a PCIe x16 graphics card expansion slot which will accept a PCIe x16 graphics card. According to the specs, installing a discrete graphics card in the PCIe x16 slot will disable the onboard integrated graphics.
The graphics card you purchase must support both monitors you wish to use with your computer. Additionally, most retail graphics cards require a 300 watt or greater system power supply. Currently , your computer has a 250 watt power supply and it will need to be replaced. Please consider the Corsair CX430, CX500, or CX600 series of power supplies to meet the new graphics card power requirements.
Alternatively, if this is mostly for word docs, spreadsheets, day trading and light video, you may wish to consider a USB-to-video adapter such as the eVGA UV Plus+ UV39 or one of the many other adapters on the market.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
How do i remove the hard drive from a compaq presario SR5319uk desktop
Hi I have a compaq presario SR5219UK desktop computer and i want to replace the hard drive but don't know how I have checked online and the videos that relate to compaq are not the same as my computer so I would be so grateful of any help i can get in a step by step run down on how to do this many thanks in advance
Here is the Manual which shows exactly how to do it.
Manual
See Page 17. You have to remove the front panel and go from there per the pictures.
If this is "the Answer" please click "Accept as Solution" to help others find it. -
Require Help Obtaining Audio Driver for Compaq Presario SR1429UK desktop
Hi,
Really hoping someone can assist me obtaining the Realtek High Definition Audio driver for the Compaq Presario SR1429UK desktop.
I've obtained a second hand SR1429UK and it has been rebuilt but I have been unable to install the audio driver. I've tried downloading it from the compaq site but the sp26552.exe update driver which is available does not work and reports errors on installation. From the Compaq site, the only available driver is the update driver and there is no available download of the 'original' driver which is sometimes available for other models.
I've tried using the other SR1429 drivers (ES, FR, IT, NX etc) but they don't seem to be compatible.
I also don't have to the recovery disk or compaq application recovery installed as it's a clean WinXP Pro build.
ANy ideas where else I can obtain this driver?
Cheers, JeremyHi,
It seems you are trying to download the driver update of the audio drivers. Please try downloading the original drivers from the following weblink:
http://h10025.www1.hp.com/ewfrf/wc/genericSoftwareDownloadIndex?cc=us&dlc=en&lc=en&softwareitem=pv-2...
Hope this information helps.
Regards,
Vidya
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!*** -
Compaq Presario SR1000 Desktop PC - Help for Audio Drivers
Hi
I have one Compaq Presario SR1000 Desktop PC, in which I am using Windows XP operating system.
I am unable to install audio drivers. I have downloaded the drivers from the HP- website and installed on this pc.
Still audio is not cming.
I have also changed the onboard audio in BIOS from Auto to Enabled, still there is no audio.
I am not using any graphics card in this pc and using normal speakers or head phone.
The PC has PCI Express mother board in it.
Please help me to get audio from this pc.
Thanks in advance.Hi:
Which specific model SR1000 do you have?
http://h10025.www1.hp.com/ewfrf/wc/pfinder?cc=us&lc=en&query=SR1000&tool=s-002&dlc=en#N51 -
Compaq Presario SR5160IL Desktop
In my Compaq Presario SR5160IL Desktop there are two sata ports out of them one is not responding as a result i am not able to use DVD ROM. What should i do now to get it workable.
Hello n_s_khera,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that one of the SATA ports on your HP Compaq Presario SR5160IL Desktop PC is not working. The issue you are describing appears to be a physical issue and I think it would be best if you contact HP Technical Support for repair options.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
Audio Driver for Compaq Presario SG3670IL Desktop with Windows XP OS
I'm not able to find the Audio Driver for Compaq Presario SG3670IL Desktop with Windows XP OS
Try one of the lower ones on the list at the following Realtek URL
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownT...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
iTunes RADIO is not working.
“iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again.” Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so …
iTunes STORE not “connectable” with my otherwise perfectly-working internet connection, viable, up and running for all other uses.
Simply put, firstly, I can't connect to the internet when I click on Radio. People are quite suspicious that this is Apple incompetence or your company's famous arrogance for this commonly-suffered problem that you won't or “can’t” fix.
Read the many web comments and you won’t be pleased with yourselves: the suspicion is that if you ruin internet radio on iTunes, Apple will somehow make more money on music downloads, etc. Bull.
Also, thirdly, my old playlist of 20 or so internet radio stations in the Ambient category STILL PLAYS !
Then fourth, I installed the latest available version of QuickTime Player 7.app Version 7.6.6 but it didn’t solve the problem either. I had QuickTime Player.app Version 10.2, but substituted what Apple website said was the latest, LOWER NUMBERED QuickTime Player version of 7.6.6
Fifth, I can't connect to iTunes store no matter what I do or what user group's advice I try. So I can’t buy or download anything from iTunes. Bad for business.
Sixth, I updated to the latest version of iTunes but this weird problem remains. All suggested Apple fixes or user group fixes are useless. Where is Apple’s famous technical competency, vaunted customer support?, and user-friendly product reputation? Get it back, please.
Solve this problem of yours ASAP for us, your numerous disgruntled, dissatisfied customers of iTunes. You can do better, should, and really –in all fairness- must.
===============================================================
NOTE: no password for iTunes exists in my Keychain. Is this a problem?
Apple ACCOUNT ID, and iTunes ID password, works but not to access iTunes with my healthy internet connection.
Apple store id It works via direct internet connetion but not through iTunes. Very strange.
===============================================================
FYI, Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 16 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.69f4
Serial Number (system): C0*******F8V
Sudden Motion Sensor:
State: Disabled
Intel 6 Series Chipset:
Vendor: Intel
Product: 6 Series Chipset
Link Speed: 6 Gigabit
Negotiated Link Speed: 6 Gigabit
Description: AHCI Version 1.30 Supported
M4-CT512M4SSD2:
Capacity: 512.11 GB (512,110,190,592 bytes)
Model: M4-CT512M4SSD2
Revision: 040H
Serial Number: 0000000012330912E75A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Solid State
TRIM Support: Yes
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
disk0s2:
Capacity: 511.25 GB (511,250,432,000 bytes)
BSD Name: disk0s2
Content: Apple_CoreStorage
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk0s3
Content: Apple_Boot
Volume UUID: 600737FB-7A29-3BAE-859E-CBFE2E90C39A
<Edited by Host>This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013
Maybe you are looking for
-
How do I add a search web part to search ONLY a subsite?
I'm trying to add a search web part into a subsite that will search ONLY that specific subsite for documents. Not the entire site collection or anything else. Everything I've looked at doesn't address this specifically. I want a user to be able to
-
Hi guys, my brand new Imac 21.5 got stuck on the white screen with apple logo and nonstop little wheel, but it never gets out of it....Disconnected everything else restarted but still nothing...stuck at the same screen. Please i need help, the machin
-
Using images with Transparency in Photobooks
I'm to a point where I would like to use images that utilize transparency in Aperture photo books. Is this possible? So far, PSD files that I've cropped with PS's lasso tools to have transparent areas surrounding their subject tend to change this are
-
Dual monitors on the ATI Radeon 9600 XT black screen on 2nd monitor
i have problem on second monitor , it always turn black during my work, and in a second it turn back to work well again, about 20-30 minutes a time . can anyone here give me some help ? it really make me go crazy.... Thanks! POWER MAC G5 DUAL 2.5 +AT
-
Need to Fix Bad Panning and Tilting
Hey I just watched some footage I shot with a DP, but unfortuntely the DP was not very good at panninga dn tiltiing so the subjects are not framed centered. Is there any way to fix that in FCP? I have a jib shot where they sorta go out of frame, but