Compaq Presario V6000 in System Disabled

Hi!I have a problem with my laptop since 3weeks ago....And i tried to logged in for 3 attempts it says "system disabled"but i knew my password....Have any solutions to fix this?thanks....

Hi,
What is the disabled code ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Problem with Compaq Presario V6000 laptop

    Hi forum members! I am a newbie to this forum and i would like to introduce myself, my name is Hammy and I am from Glasgow. I have a problem with my laptop whih is a Compaq Presario V6000 running windows Vista, 32 bit product number V6254EA.
    A few weeks ago when i turned on the computer it failed to boot up, the only thing visible on the screen is the bar at the bottom of the screen with `Microsoft Corporation` displayed below it.
    I have tried starting it up in SAFE MODE but all that happens is that a certain amount of windows system drivers are loaded and then goes no further!
    I have purchased recovery discs with no joy! I have also tried a hard reset which has not solved the problem. I tried the `hard drive self test, which after approx 30 seconds carrying out a quick test displayed the following message #1- 07 Fail.
    If it is the hard drive or the motherboard that has failed is it possible to replace them.
    Thanks 

    Did you burn the recovery disks? Will follow up with the manual and a link to buy the hdd.

  • I want ribbon cable for my compaq presario V6000 laptop

    I want ribbon cable for my compaq presario V6000 laptop: cable code is: AWM E118077 2896 80C VW-1 POWER RIBBON CABLE.
    where to get it from?
    Please help as i am unable to find this on online sites ,all are from USA,China etc.

    MaheshGupta wrote:
    I want ribbon cable for my compaq presario V6000 laptop: cable code is: AWM E118077 2896 80C VW-1 POWER RIBBON CABLE.
    where to get it from?
    Please help as i am unable to find this on online sites ,all are from USA,China etc.
    Cable code isn't going to help what you need the the cable part number. Without this no one will be able to help you locate the cable. Also you should tells us the P/N that will insure someone can look into what the part is and also what is that cable for as there is no discription what it does or connects to.
    How Do I Find My Model Number or Product Number?
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Compaq Presario CQ57 Laptop System Bios recovery problem

    A customer of mine has a Compaq Presario CQ57 that has developed a BIOS problem.
    I am unsure if it had had a BIOS update through HP Support Assistant or if it just decided to start for no reason but it now intermittently decides to recover the System BIOS at start up.
    It is all very random. It may not do it for a while - working fine every time it is switched on - but then just decides to go into this recovery. Sometimes the recovery sorts it first time, sometimes it has to go through the recovery mode several times before it sorts it out. Once sorted, Windows and the laptop work fine.
    I have tried to remedy it by installing BIOS updates. There are 4 available on the HP website. I have installed all four at various points - sometimes they install, sometimes they fail. Sometimes the recovery mode kicks in straight after - usually after a fail which makes sense. Other times it will work OK for many start ups and then just go back to it's old tricks.
    Any suggestions would be very helpful.
    Thanks in advance.

    Hello rmaiden,
    Welcome to the HP Forums!
    I understand your Compaq Presario CQ57-212NR gives you an error after running the system recovery.
    Can you tell me if this error loads within Windows or if it prevents you from starting up.
    I would suggest you acquire an ISO image of Windows 7 and burn it to a DVD. Use this to install Windows and then run the recovery after. This should remedy the problem.
    Let me know if this works for you!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • No audio output device is installed(code 10 error), in compaq presario v6000

    Hi,
    I have compaq presario v6608AU laptop with vista OS installed
    I got a small red cross mark near the sound icon in the taskbar.
    I read the forum and tried all possible ways to get back the sound but nothing worked.
    when i switched on the bluetooth, it shows audio connected to bluetooth but no audio in laptop
    In device manager i was not able to find any drivers for laptop audio but wireless audio is installed.
    I tried downloading audio driver for my notebook but it doesnt get installed, saying no audio device found code 10 error
    It would be a great help if some  one would help me.
    Thanks,

    Hi,
    Please follow the following link
      http://support.microsoft.com/kb/2011656
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Compaq CQ61-420US getting system disable 65879468 please help

    When I power on my notebook I'm getting a message saying enter administrator password or power on password. After entering the password wrong 3 times I get a error message system disable 65879468

    Hi,
    Double post, please use:
        http://h30434.www3.hp.com/t5/Notebook-Recovery/Sta​rt-up-error-message-65879468/m-p/4853515
    Thanks,.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I keep my Compaq Presario V6000 fan from running continuous​ly?

    I have this old Presario V6000 with a single core processor, 3GB ram, and 160GB HD with integrated graphics. I don't do any gaming or deal with large file manipulation, or any of the other processes that overtax the graphics or the cpu. The fan still runs all the time, and it's not real quiet. Just peeping through the vent holes with a flashlight and looking at the fan, I don't see that much dust or anything that could be hindering air flow. The unit does not get exceedingly hot to the touch. There in no option in Bios that allows toggling of the fan function. It's just loud and annoying.
    My question is this: is there a thermostatic fan controller on this thing that could be malfunctioning and not not allowing the fan to turn off below a certain temperature? Is it part off the fan itself?
    Short of tearing the laptop down to the mb and doing a thorough cleaning, is my only other option to blow out what I can from the outside of the case. I don't mind taking it apart, it's just time consuming and I could inadvertently mess something else up. Should I replace the fan (and thermostat) while I'm in there? Maybe a better performing fan? Or do I just need to accept that it's an old dog and this is the way old dogs act ?
    Thanks for any input. Jim 

    Hi,
    All you should need to do after replacing the HDD is the following.
    Start the notebook and open the CD/DVD drive.  Insert the first Recovery Disc.  Hold down the power button until the notebook shuts down.  Press the power button to start the notebook which should now boot from the Recovery Disc and start the recovery process.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Compaq Presario v6000 recovery without disks

    My last recovery disc cannot be read by my laptop. It seems that the 6000v recovery disc are no longer available. When I push f11 during start up it gives me no options, just prompts me to insert the disk that it cannot read. Any alternatives?

    When requesting assistance, please provide the complete model name and product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the bottom of your computer, inside the battery compartment, or on the BIOS setup screen. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • [Compaq Presario V6000] [Windows XP] How to program the quick launch buttons?

    I downloaded the software from http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32... but cannot find the menu it describes on the page. Thank you!

    Hello,
    Try it from this location
    and this document may help with additional info.
    Please let me know if this helps.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Compaq Presario Blank Screen

    Hi, I've got a Compaq Presario CQ61-406SA Notebook, and the screen's just displying a black screen. The backlight's on, and I'm using an external monitor to type this so I know the laptop's running fine. I'm wondering if I need a new screen, or is it something else? Thanks.

    Hello @Sachmo499 ,
    Welcome to the HP Forums!
    I understand your notebook keeps restarting and displays a black screen.
    Here's a great place to start troubleshooting startup issues on a notebook: 
    Computer Does Not Start and the LEDs Blink or the Computer Beeps.
    Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
    Testing for Hardware Failures (Windows 7, Vista) or Testing for Hardware Failures (Windows 8).
    If you search for any notebook boot issues or black screen, regardless of the brand you will find this issue everywhere. There are currently no recalls for this product.
    If you wish to have the notebook repaired I would suggest calling HP Phone Support for service/repair options. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
    If you wish to remove the HDD and connect it to another computer to backup your info, you can follow this guide: Compaq Presario V6000 Notebook PC.
    Hopefully this helps!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Compaq presario v6210US blank screen

    I have a "compaq presario v6210US" which worked great for a while then it just shut itself off and restarted and the screen stayed black. Now it keeps restarting itself but the screen stays blakc. I can hear the fan and hard drive and everything else running the way it's supposed to. I heard that this has happened to a bunch of other people so it sounds like a defect to me. How do I get it fixed or do I just pull the hard drive, toss the Presario and get a competitors laptop?
    This question was solved.
    View Solution.

    Hello @Sachmo499 ,
    Welcome to the HP Forums!
    I understand your notebook keeps restarting and displays a black screen.
    Here's a great place to start troubleshooting startup issues on a notebook: 
    Computer Does Not Start and the LEDs Blink or the Computer Beeps.
    Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
    Testing for Hardware Failures (Windows 7, Vista) or Testing for Hardware Failures (Windows 8).
    If you search for any notebook boot issues or black screen, regardless of the brand you will find this issue everywhere. There are currently no recalls for this product.
    If you wish to have the notebook repaired I would suggest calling HP Phone Support for service/repair options. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
    If you wish to remove the HDD and connect it to another computer to backup your info, you can follow this guide: Compaq Presario V6000 Notebook PC.
    Hopefully this helps!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Compaq presario V5000 power on password reset system disabled code06004

    Forgot my power up password n. Can't get past that screen on my presario v5000 compaq laptop. after 3 attempts screen freezes to 'system disabled 06004 .does anyone have a factory reset method that may help me?? This would be highly appreciated!
    This question was solved.
    View Solution.

    Hi,
    Enter:       uvnjddi
                           or
                       srwfjou
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Compaq Presario CQ57-339WM bios password system disabled

    System disabled after 3 tries, it keeps showing 68235122
    This question was solved.
    View Solution.

    Hi,
    Please use
       77193104
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • System disabled 02227-compaq Presario v5000

    I forgot my power on password after 3 tries it displays system disabled 02227 can any one help . any input would be greatly appreciated.

    Hi,
    See your latest post on the the link below.
    http://h30434.www3.hp.com/t5/Other-HP-Consumer-Products-and-Technologies/system-disabled-02227-compa...
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Audio system is not working in my laptop compaq presario CQ40-601TU, VQ969PA

    system shows error code 39 in both IDT high definition audio codec and Intel (R) high definition audio Hdmi. The system operated with windows 7. The model is compaq presario cq40-601TU, VQ969PA#ACJ.

    Install HP Support Assistant from here and run a health analysis to install all drivers for your system.
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

Maybe you are looking for

  • PO with Overdue delivery in R/3 to test a report in BW

    Hi All, I want to test Vendor Performance Report in BW against R/3. How can I identify that a particular PO has overdue delivery (Delivery of goods incomplete by the vendor and still some Qty is outstanding). Can any one suggest a TCode or table. Can

  • Where can I find my pictures in Time Machine?

    In the Finder I can find my pictures after right-clicking IPhoto and then under Originals. But when I open Time Machine and want to check if my data have been backuped correctly I can find my music and documents but not my Pictures. Where can I find

  • HT1589 Transfering iTunes from old HDD to new HDD

    Hi,.. The graphics card in my laptop that I had itunes on crashed so I took the hard drive out and placed it into my pc running win7X64bit, My question is, can I, or how do I move my itunes music /photos etc from my old laptop drive to my current C:/

  • How to obtain BOM componnts at the lowest level based on SUB item indicator

    I am doing a report based on CK13N wherein i hav material and plant as the selection parameters and based on that i get the product costing of the entire BOM. I pass material to MAST.get the BOM num and usage Pass it to STAS and get STLKN (ITEM NODE

  • Adobe form getting data from BADI?

    Hi, I  have a webdynpro component which calls an Adobe form which gets data from BADI i.e. prepoulate the values after interacting with the BADI's.How to find the BADI's name ?how it triggers that particular BADI.where it is calling exit handler? ple