Compaq presario61 HELP

compaq presario61 here's the number after admin password error3 trys key 76743684
Help help help
This question was solved.
View Solution.

Hi,
Enter: 69621200
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Old compaq need help

I recently required an old compaq presario 5310US desktop. Yes it's old but it's stable. I tried installing arch on it last night but i failed. I don't know which graphics driver i should install on this old machine. I know for sure it doesn't have nvidia or ati. I think it has some sort of intel but i don't know. here is the official hp write-up on it. http://h10025.www1.hp.com/ewfrf/wc/docu … duct=93197
any help will be appreciated.

byte wrote:I always find everything I need on the Compaq/HP site, their docs are excellent. So three mouseclicks from the link you provided I found this, which leads me to believe you should install xf86-video-i810.
are you sure about this. what makes you believe that it's the i810 and not just the intel one?

Compaq cq50 help

I was given a compaq cq50. it work great but i took it apart to clean the dust out of the fan. after putting it back together it won't turn on, but if i leave the top cover off or just sitting on it. then it will turn on. i look and i can't find whats shorting out. hope someone ran into this problem. thanks for the help i do get.

Hi @gwb1974 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Compaq-Presario-CQ50 Notebook and issues after cleaning the internals. Are you getting fans?
Here is a link that might help on computer won't start correctly.
Do you see any of the cables that have a wear or mark that might give the impression that they are being restricted or crushed?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Compaq CQ61 Help.

Ok, so i had some headphones plugged in and TeamSpeak 3 running. The sound from TS3 was coming in the headphones, everything else in the internal speakers. So i clicked on this button: http://tinypic.com/r/2cxt66w/7
And dissconnected the Internal speaker. When i click it now, i get and error from the Troublshooter and the speakers aren't working. I would like some help please, Thanks in advance.

Hi,
Double post, please use:
http://h30434.www3.hp.com/t5/Notebook-Recovery/Start-up-error-message-65879468/m-p/4853515
Thanks,.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I tunes match will not work on my computer. help

I tunes match does not work on my compaq presario. help. I have uninstalled an reinstalled itunes.

A great way to flag such an issue is to include a Screenshot of the point at which you find iTunes Match does not work - simply find PrintScrn key when the error is on the screen, hit the key, paste the result into simple accessory such as Paint, save as JPEG and using the camera icon to import the image alongside your supporting text.
Certainly Windows 7 both 32 bit and 64bit work very well with the latest version of iTunes and iTune Match.

Complain about ahmedabad service centre

Hi everyone this is horrible experience with compaq hp. my desktop SMPS was blown on 20 feb. i logged a complain in ahmedabad service station on 22nd feb. today on 1st march till the SMPS is not delivered from service centre to local authorised service engineer.
Complain by name : Haresh parmar. jamnagar
This is could have been avoided if i would go by assembled pc than compaq.
kindly help me to log a complain to some higher ups who can help me to restart my pc earliest.

To Contact iTunes Customer Service
Use this Link > Apple Support iTunes Store Contact

Compaq pressario 6604 au conexant high definition audio is not working in windows 7.. please help me

i upgraded my hp compaq pressario v 6604 au to windows 7.but i cant install sound driver. while installing it tells 'driver installation failed, could not find the device for this driver'
i downloaded new version of sound driver named sp 40170 from hp
please help me..........

Hi,
My suggestion: install this one before install sp40170
http://drivers.softpedia.com/get/SOUND-CARD/OTHER-SOUNDCARDS/Microsoft-UAA-Bus-Driver-for-High-Defin...
Good luck,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

THIS COMPAQ SEEMS TO HANG UP OR SLOW TO LOAD PAGES AND PROGRAM..WOULD MORE DIMM MEMORY HELP

THIS COMPAQ IS NEW..BUT ONLY HAS 2 GB OF MEMEORY..WITH MORE MEMORY SLOTS AVAILABLE ..I HAVE 2 DIMM MEMORY STICKS FROM MY OLD DELL, A 2 AND A 1 GB..WILL THEY WORK IN THIS COMPUTER AND IF I INSTALL THEM DOES IT VOID MY WARRANTY.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Need help!! Compaq V3500 No audio driver available in website

Need Help Compaq V3510TU P/N GG201PA#AKL Windows XP Professional 32 bit, After I re installed the new OS..
The windows doesn't have the audio driver. I tried everything download many of Conexant HD many many version...
they don't work at all.
Please tell me what you should do next
P.S. Last year I came to hp website, it provided many driver in windows xp but now nothing... where 'd they gone???
I tried these, but didn't work
sp36509
sp35682
and many many of them
This question was solved.
View Solution.

Hi:
Please read the XP downgrade guide at the link below:
http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
The instructions for installing the audio for your model can be found under the section labeled 1. Easy Models
More than likely you didn't install the required MS UAA driver before installing your audio driver.
You will need to uninstall any audio drivers you tried before installing the MS UAA driver.
Paul

Hi, I have a latest Macbook Pro Retina. I connect its hdmi port to a DisportPort of HP Compaq LA2205wg external monitor, but no signal at all. Could anybody help me

Hi, I have a latest Macbook Pro Retina. I connect its hdmi port to a DisportPort of HP Compaq LA2205wg external monitor, but no signal at all. Could anybody help me

I could be *very* wrong but did not know you could output from HDMI into displayport consistently with no issues.
Try a mDP to DP cable like this (the mDP end will go directly into the thunderbolt port of your laptop)
http://www.monoprice.com/Product?c_id=102&cp_id=10246&cs_id=1024606&p_id=6006&se q=1&format=2

Compaq Multiport Evo n800c wlan help needed(long)

I am having problems getting my wireless network module working. I ran the hotplug script when i first attempted to get this working. The difference with the multiport card, is that to initially enable the device one must enable it by pressing, function(Fn)+F2.
When i enable the device with this key press i notice that the prism2_usb module is loaded via lsmod.
prism2_usb 76932 0
p80211 32272 1 prism2_usb
When i researched the module needed for this multiport device, there are many different opinions on compaq multiports, as well as many problems with them. The Orinocco modules and and Prism modules were mentioned as "working" modules(via hp linux forums/googling/mailing lists).
I assumed that the prism modules were the correct ones to use, since they are loaded when the device is enabled(i assumed these modules were selected by hotplug). Maybe this is where I am wrong, but moving on.
I then downloaded the wirelesstools package so that i can utilize the command iwconfig, and to help with wlan devices.
Im very new to arch-linux, so I dont know where to go at this point. The wireless networking does not work with this module loaded.
iwconfig
lo no wireless extensions.
sit0 no wireless extensions.
eth0 no wireless extensions.
wlan0 no wireless extensions.
ifconfig -a
wlan0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST NOTRAILERS MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
I do think something is wrong with the module maybe, because of the fact that no hardware address is represented. I could be wrong being that im new to arch/linux. But again I do not know how the multiport modules from compaq work.
/etc/rc.d/wlan start
Starting WLAN Devices: FATAL: Module wlan0 not found.
FATAL: Module wlan0 not found.
message=lnxreq_ifstate
ifstate=fwload
resultcode=implementation_failure
prism2dl: No such device
load_cardpda failed, exiting.
Unknown prism2 hardware type (), assuming SSF
Processing PDR file: /tmp/prism2_ssf.pda
prism2dl: No such device
Couldn't fetch PRI-SUP info
Warning: RAM load only, PDA changes will NOT be written to flash.
Reading S-record file /etc/wlan//prism2_pm.hex...
NIC ID: 0 v0.0.0
MFI ID: 0 v0 0->0
CFI ID: 0 v0 0->0
PRI ID: 0 v0 0->0
Version: ID 0x15 1.1.2
Compat: Role 0 Id 0x3 v2 4->4
Compat: Role 0x1 Id 0x2 v2 1->1
Seq: 0
Platform: ID 0x800e 1.0.0
Platform: ID 0x8015 1.0.0
Platform: ID 0x8019 1.0.0
Platform: ID 0x801d 1.0.0
Platform: ID 0x8024 1.0.0
prism2dl: warning: Failed to find PDR for plugrec 0x0003.
prism2dl: warning: Failed to find PDR for plugrec 0x0005.
prism2dl: warning: Failed to find PDR for plugrec 0x0006.
prism2dl: warning: Failed to find PDR for plugrec 0x0007.
prism2dl: warning: Failed to find PDR for plugrec 0x0008.
prism2dl: warning: Failed to find PDR for plugrec 0x0402.
prism2dl: warning: Failed to find PDR for plugrec 0x0403.
prism2dl: warning: Failed to find PDR for plugrec 0x0404.
prism2dl: warning: Failed to find PDR for plugrec 0x0408.
prism2dl: warning: Failed to find PDR for plugrec 0x0001.
prism2dl: No such device
prism2dl: writeimage()->do_ioctl() failed w/ result=19, aborting download
prism2dl: Failed to ramwrite image data for /etc/wlan//prism2_pm.hex, exiting.
prism2dl: No such device
load_cardpda failed, exiting.
Firmware failed to load for device wlan0
This makes me further the thought of the module not being correct, because the wlan0 device is not even recognized.
Now that I think the module is wrong I rmmod the modules Ithat were loaded when powering on the device.(prism2_usb/p80211). I then load the orinoco modules via modprobe orinoco.
lsmod
orinoco 44428 0
hermes 8320 1 orinoco
iwconfig
lo no wireless extensions.
sit0 no wireless extensions.
eth0 no wireless extensions.
/etc/rc.d/wlan start
Starting WLAN Devices: FATAL: Module wlan0 not found.
FATAL: Module wlan0 not found.
Error: Device wlan0 does not seem to be present.
Make sure you've inserted the appropriate
modules or that your modules.conf file contains
the appropriate aliase(s).
I do have to most recent wlan-ng26 drivers: wlancfg version: 0.2.1-pre21
I tried to figure out the exact chipset but I had no luck with this, since the multiport device is on a usb hub/uses usb. So this device was not listed in lspic, and I have the ohci-hcd module loaded via rc.conf.
I also have included the line, wlan0="dhcp" n INTERFACES=(lo eth0 wlan0), in my rc.conf.
Which brings me here, with no idea of what to try to do. I hope I have included enough information. If anyone needs any more information I will gladly provide it. Any help would be greatly appreciated.

i0m also relatively newbie for wireless, but at least i have mine working
what i wonder about your config, is, why do you use wlan0 ?
i myself have eth0 (normal, using e100), eth1 (firewire), eth2 (wireless, using orinoco_pci) and it seems to work like this:
modprobe orinoco_pci
(what is managed for you with hotplug, hopefully)
then
iwconfig ......
using all options needed for the net i want to login
then
dhcpcd eth2
and then it works simply
so i have nowhere wlan0, but i don't use hotplug for this
anyone knowning more feel free to correct me :-)

Compaq Presario Cq 60 116-ee Os-Xp Built In Webcam Mic doesnt work,,Please Help

Hi
I have a Compaq Presario Cq 60 116-ee Os-Xp
the mic on the webcam doesnt work
can anyone help me with the driver
I would appreciate the help
Ciao

How did you install xorg? What is your hardware? (lspci -vv) Please provide details.

Help HelpHelpHelp On USB ports!! Compaq Presario CQ5222IT

Hello everybody!
Sorry for writing this again but i really NEED help!
I have a HUGE problem on my desktop Compaq Presario CQ5222IT!!!!
All USB ports are DEAD!!! They won't work for anyreason!!
I don't know what happened all i know is that i can't communicate with my PC at all!!!
I can't log on to Windows(keyboard and mouse are out because they are USB) and i can't enter BIOS!!
I don't have other ports only USB!!!!
I tried to remove battery, to remove RAM but nothing happened!!!
Can any one tell me what can i do???
Is there any possibility to reset USB ports on motherboard???
Model-CQ5222IT
Product-VN499AA#ABZ
Serial-[edited Serial Number by Moderator]
Thanks in advance

Hello @big_boss,
I understand that your Compaq Presario CQ5222IT Desktop PC's USB ports are not working at all on your computer. The issue you are describing appears to be a physical issue. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Help Please Re:Compaq Mini CQ10-110sa

Hi,
My husband has a Compaq CQ10-110sa Mini Netbook bought last year brand new.
Operating System was pre-installed: Windows XP Home.
He decided that he wanted to upgrade his netbook and so for safety and security before selling it we looked into doing a Reset back to factory settings.
However after it had done this, the netbook is now telling us that there is a file missing or corrupt : ntoskrnl.exe.
We have tried everything to fix this to no avail. And no we didn't make a recovery disc as we're both pretty careful and have used PC's for years.
Do you know of any way to fix this? As everywhere we've looked it says to use the recovery option on a Windows XP disc.
I have a Win XP disc that I have bought but when we tried "Recovery" we get told there is no Hard Drive.
Please! Any help would be really appreciated.
Thanks
Lorraine.

Hi,
The error code for the short Disk Self Test ( DST ) would indicate that the Hard Drive is failing and needs to be replaced. This is also consistent with the start-up issue.
If your notebook is still under warranty, contact HP and arrange to have the drive replaced - you can check your warranty status Here.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Need Help! Bios file for Compaq SR2010NX

Hello all, I'm looking for the original bios file for the SR2010NX. HP doesn't have it on their website and my computer won't boot correctly with it. ahhhhhh. I appreciate any help!!!
Thanks John

According to what I found, that has this motherboard:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00757470&lc=en&dlc=en&cc=us&os=2093&product=323...
Which is a A8M2N-LA Naos-GL6, is this that what you have? And what BIOS are you looking for, or should I say what did you try to put on it?
I happen to have the same motherboard on an old Compaq, so I could possibly exctact the BIOS file if it is the one you are looking for. It showes 3.00 I beleive but I will check if you need the info.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Compaq presario61 HELP

Similar Messages

Maybe you are looking for