Compare a role in two different systems

Hi All,
Is there way to comapare a role in 2 differnet systems as we have dual landscape for ECC.
Thanks,
Lisa

@ Partha - I don't think you have got time to read the thread carefully
@ Nishant - Your concern is right if both the system using same naming convention. In that case OP would get a warning before uploading the file. However one can change the role name in text file by replace method. Just to keep in mind to keep same char length for role name. And also to be carefull if any other data may get replaced apart from role name :-d
Regards,
Arpan Paik

Similar Messages

How to compare the programs in two different systems

Hi,
I have two systems say A & B and i have the program say 'Z_TESTPROG'.
How to compare the program in two different systems.
Regards,
Venkat

Hi,
Check the version in Utilities -> version -> version management in both servers is one option.
Another one is using SE39 transaction.
Regards
Manasa

Report which reads data from two different systems

Hi experts!
By any chance, would be possible to create a report which is able to read from two different cubes and two different systems at the same time?
Kind regards.

Good afternoon Raul,
It should be possible to create a multiprovider on the two different cubes from the two sources
systems and report on this.
Best Regards,
Des

How to compare the contents of two different tables

hello. can somebody give me an idean on how to compare the contents of two different tables in mysql?
example, i have a table named Main List and a table named New List.
The contents of the New List should be compared to the contents of the
Main List, to check if they are equal. I don't have any idea how to manipulate
this data. Hoping for your help. Thanks.

it is better to comapre it using java.. try get the resultset first and store that in collections then comapre the two collections

Two different system in ESS ABAP Webdynpro

Hi Experts,
            Is it possible to connect two different system (ECC 6.0) in ESS with ABAP Webdynpro Technology (EHP5)? I know it is possible in Java Webdynpro (EHP4). Please advice.
Thanks
Jacob

Hello Jacob,
I would recommend to configure the Jcos to access your second system which will be much more used as the standard ones:
○     SAP_R3_HumanResources
○     SAP_R3_HumanResources_MetaData
○     SAP_R3_Financials
○     SAP_R3_Financials_MetaData
○     SAP_R3_SelfServiceGenerics
○     SAP_R3_SelfServiceGenerics_MetaData
As for the Leave Request framework, this parameter is configured on the Iview via the Application Parameters. You can go on this via Content Admin as this is a field on the property on the iview.
You should create a new JcO to the destination system of the Leave Request framework and to parameters add the
sap-wd-arfc-useSys = JcoName.
Please refer to the following link on how to create the Jco.
http://help.sap.com/saphelp_rc10/helpdata/en/8c/cb3042366c0521e10000000a155106/frameset.htm
Regards,
Bentow.

Compare pricing procedures in 2 different systems ??

Hi All,
I know with T-Code SE39, we can compare ABAP program in 2 different systems, Likewise is there any Transaction Code where I can compare pricing procedures in 2 different system. or compare 2 different pricing procedures in same box.
Thank you,
madhu

Dear Madhu
May be you can try with this.
Go to V/08, select your pricing procedure and execute. From top menu bar, click on Table View --> Save. Again from top menu bar click on Table View --> Print so that you can see the overview of that pricing procedure.
Now parallely you can open another screen, select another pricing procedure and do the same process as above.
thanks
G. Lakshmipathi

Client comparision which are in two different systems

hi
here there is a different issue this time ....
we have two different clients (100 & 800) in two different ecc servers. in both of these servers in 100 of system-1 and 800 of system-2 ,,, implementation is done.
so now the problem is we have to compare 100 with 800 and what is missing in 100 has to be copied or what ever it may be has to be brought in to system 1 ( client 100)
i mean earlier what we were doing in 100 & 800 differently , now should me done in one single server.
how can i proceed , plz give me step by step procedure or give me some links.
it will be highly greatful .
thanks in advance
akhil

Hi Akhil,
Hi you can compare tables in two different client in <b>SCMP</b>
Regards,
Suraj

How to Configure a oracle R12 with RAC on two different system .

I have one laptop and one desktop
Laptop----
on laptop I have install vmware 8
Host OS --win7
Guest OS---linux 4
Desktop ---
On Desktop I have install Vmware 8
Hosts OS --- Win XP
Guest OS ---Linux 4
Plz suggest How configure oracle R12 with RAC using both system .

Hussein Sawwan wrote:
on laptop I have install vmware 8
Host OS --win7
Guest OS---linux 4
Desktop ---
On Desktop I have install Vmware 8
Hosts OS --- Win XP
Guest OS ---Linux 4
Plz suggest How configure oracle R12 with RAC using both system .If you want to configure RAC, then you must have the same OS installed on all RAC nodes -- See (RAC: Frequently Asked Questions [ID 220970.1], Does Oracle Clusterware or Oracle Real Application Clusters support heterogeneous platforms?) for details.
Once you have the same OS, please refer to:
Oracle E-Business Suite Release 12 High Availability Documentation Roadmap [ID 1072636.1]
Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12 [ID 388577.1]
Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 [ID 823587.1]
Thanks,
HusseinHi Hussein,
For Rac I am using both same OS (linux 4) for both nodes .
Plz suggest its possible to install two nodes on different machine(diiferent virtual machine on different system ) .Can communicate both machine without any problem if its possible plz provide links.

JInitiator - 2 versions for two different systems

I had a requirement of having two differnt versions of Jinitiator loaded on a single client system. This is requiremnt for two different applications say application 'a' and application 'b';
Will browser recognise which one to choose depending upon application ?

Yes, the confirguration information on the application server defines which version of the plug ins to us and so the correct one will be loaded.
Regards
Grant Ronald
Oracle Product Management

Comparing row values in two different tables

Hello,
Does anyone know if it is possible to compare (and possibly highlight - which I know can be done) row values in two different tables?
I have a ZIP Code column in table A that I want to compare to a ZIP Code column in table B and highlight those ZIP Codes that are present in table B but not in table A etc. Is this possible?
Thanks,
Kenneth

To be able to apply conditional formatting, I must edit the formulas this way.
=IF(ISBLANK(B)," ",IF(ISERROR(VLOOKUP(B,Tableau 2 :: B,1,0))," ",VLOOKUP(B,Tableau 2 :: B,1,0)))
=IF(ISBLANK(B)," ",IF(ISERROR(VLOOKUP(B,Tableau 1 :: B,1,0))," ",VLOOKUP(B,Tableau 1 :: B,1,0)))
I replaces the four empty strings by strings containing one space character.
In the field supposed to contain the text which is not contained I just entered a single space character.
Yvan KOENIG (from FRANCE vendredi 12 septembre 2008 20:52:11)

Unable to compare the same program in different systems

Hi,
We have a Development & QA system (apart from Production). Now for a program that is in both, Dev & QA, I wanted to compare them using SE37. I clicked on "Compare Different Systems" button. Now I selected the program from Dev for Left-Justified & from QA for Right. When I hit the "Display" button, it gave me the following error message:
Error remote access: Error during the retrieval of the logon data store.
Can anyone help me with this?
Thank you.

Hi Jack,
I went to SM59 & double clicked on my RFC (that I thought would work). It took me to the RFC destination config. screen & it showed me the following message:
User password invalid for identifier /RFC/---- (see long text)
( the dotted lines denote the RFC name )
It's not shown with a red cross mark. It's shown with a Green tick mark. So how do I correct this now & be able to compare the proram? Please let me know.
Thank you.

How to compare pixel values of two different grayscale images...

I have two different grayscale images both of much different sizes. One is 46x20 pixels and the other is 2592x1944 pixels. I'm having trouble finding a way to "scan" the smaller image through the larger one so that comparisons between the pixel values can be made. Basically I'm trying to see if anything matches the smaller image in the big image semi-closely. I can access the pixel values of each image but I can't figure out an algorithm to perform the scan. Any help at all would be very much appreciated! Thanks.

Hi
recipe:
1.
Find all the values for all the pixels in the small image. Some might be similar. Put all those values that are useful into a List called comparisonList.
2.
For each scanline in the large image
For each pixel in the scanline
is this pixel the same value as a pixel in the comparisonList?
if so do something
is the scanline finished?
if not next pixel
loop to next scanline
where scanline is a horizontal line in the big picture.
my 2c
hope helps

Compare two queries of two different system.

Hello all,
I need to certify the some queries, the process we follow is as below.
1. The query will be created in Production system, we will transport back to Development server.
2. Compare the query (Characterstics, Key Figures and Definition), In other words I need to compare and validate each and every aspect of Query with the Development and Production.
3. I need to change the query if I find anything difference in Prod and Dev system.
4. Transport to the Production.
Here my problem is I'm comparing manually by opening RRMX in each of the system and each variable, its time consuming as it is a manual process there is a chance of missing some important. So I would like to know is there any way to compare the queries Prod and Dev server in easier way than manually.
I hope requirement is clear to you or else just let me know your concerns and thoughts on this.
Thanks in advance,
Umashankar

Umashankar,
I dont think there is an easy way to do this as you are asking for - however you can do a basic level comparison as to number of query ellements , variables that are there etc - this can be done using the table rszcompdir which has all the query elements of the query but then a direct one to onw comparison may not be possible since the query elements are identified by GUIDs which usually will be different across systems.

Difference in LOCL print preview for same script in two different systems

Hi All,
When I am testing a dunning letter ( Custom sapscript) in my testing system the LOCL print preview is correct...When I am testing it in my development system by taking print preview from LOCL it is not printing a uline and some line item headers...
There is one text element for printing line item header.
U1....ULINE(73)
T0    &vline& ....&T_MATNR&..
T3    &vline&
UL   &ULINE(73)
IN Development sytame in print preview every thing is perfect except the above portion the first uline and vline are not getting printed and as a result next vline and uline are dispalyed a bit above .. I am unable to understand why one uline is not printed but the othe one is printed as we are using HELVE12 in both cases and above all why in test system this problem is not occuring..
I checked and am 100% sure there is no difference between the layout versions in the two sapscripts...Also checked most of the SPAD configs in two systems and found them same..
Can you give me any idead about the reason for the diffrence in print preview as in both cases it will consider the printer installed on the local desktop....
Just we use citrix metaframe to log in SAP but that should not be the reason as thne problem would be in both system..
Please help me out...
Thanks and Regards
Sweta

Hi ,
I already mentioned that I am selcting LOCL ( Device type Sapwin) in both cases so in both cases it is considering the printer installed on the local system...
Can anyone tell me specific spad config or anything else which I need to compare in both systems..

Intensity Pro Disappears from two different systems

I posted this question on the BMD forums and with BMD tech directly, still no answer, going to try my luck here!
I have two Mac Pros (MacPro3,1 early 2008), one is running 10.6.8 and the other is running 10.9.2. Each of them has an Intensity Pro card in it. I'm not sure when this problem started, but I'd say about a year ago in BMD drivers I didn't have this issue. I'd like to roll back to a working version of the BMD drivers, but I don't know which one to go to.
For a while now, after a few reboots, the card disappears from the system and isn't detected by the computer or the drivers, or Media Express.
I have tried rebooting, clearing the EFI, clearing the boot caches, but the only thing that seems to work is moving the card to a different PCIe slot. Then it's fine for a few months, eventually disappears again, and I move it back to the old slot, and it shows up again for another few months.
The machines are identical, except one has a Radeon 5000 series video card. They both have 16GB RAM, and no other cards in the PCIe slots, save the GPU.
Wierd huh?
*UPDATE*
I am now running V10 drivers on the Mavericks system, and V8.6.1 on the Snow Leopard system. No change. Every time I have to power off or reboot, the cards are gone. Then I have to shut the machine off again, move the offending cards to different slots, start up again, and they're back...
Note: This doesn't affect my Radeon cards or my UAD1 card.

I'm currently running Blackmagic Desktop Video Macintosh 9.9.2 on a Mac Pro 5,1 (2010) with Mavericks (10.9.2) without any issues (using an BM Intensity Pro card). Previously ran Blackmagic Intensity Macintosh 3.9.4 on a Mac Pro 2,1 (2007) with Snow Leopard without issue.

Compare a role in two different systems

Similar Messages

Maybe you are looking for