Compare in Library works just left / right ?

Isn't there the chance to put the 'Select' on top and the 'Candidate' under it?
I would prefer that for horizontal images.
Thanks
Stefano

Similar Messages

Ddts-100 + audigy2 zs + 550thx mega works. only left/right output

just purchased and installed the above system. however, when doing the software test under speaker settings, i only get front left and front right. all the others dont work. i have miniplug out from audigy (digital output) to (coaxial input) decoder, then decoder out (front left/right, rear left/right, sub/front) to megaworks input (front left/right, rear left/right, sub/front). i do the test on the ddts-100 decoder, and i get all 5.1 channels. now, just to clarify, i used the supplied mini plug to rca, that rca to the rca input (coaxial) the plug is the mono plug that came with the decoder. do i need to go out and buy the 4 pole mini plug? why dont they just supply it instead of the mono plug.. which isnt even shown to be used in my manuals.
anyway, clarification would be good on the mono/4 pole miniplug. otherwise nice sound so far.cant turn it up cuz its midnight and highly doubt the neighbours would appreciate it.
cheers
Steve

Hmmm... My guess is that this is due to your setup with digital out. Since the digital out on your soundcard will not pass through anything other than stereo PCM or encoded SPDIF data you will not get anything else but FL and FR channels when calibrating. Read more about this is the soundblaster forum section here.
My suggestion, as I'm sure everyone else will, is to connect your soundcard using the analogue outputs into the switchbox of the DDTS-100.
Edit: to be more precise this is how you can connect everything: from your soundcard, connect the analogue outputs into the switchbox of the DDTS-100. Connect the switchbox to the main DDTS-00. Connect the DDTS-00 main to the speakers. Now, connect the digital out from your soundcard into the coaxial input on the DDTS-100. When doing a calibration, switch to PC mode on the switchbox and calibrate. If you then want to use the digital out, enable digital out only in the speaker or THX settings. I use this setup at home actually but use the T7700 speakers instead.
Message Edited by rico0 on 07-20-2005 09:50 AM

DV6000 Vista Audio Problems (SOUND WORKS just not right)

So audio through speakers, headphones work fine.
But I have a Z-5500 from Logitech and want to use the direct line function, and turn the three inputs in the front into the three audio channels for hd audio.
In XP there was a switcher for this and it was easy, but vista ...
can anyone help me out here if you know what I mean, ive been googling the last hour to no luck.

The best advice I can give is to fully remove ALL Creative software.We've compiled a list of entries that will cause problems here. It's very important before installing newer files.http://nomoregoatsoup.wordpress.com/...tall-problems/Then install some better drivers and see if that cures your issues. The 2.2.0002 drivers are really, really awful, 99% of people I've spoken to had problems with them. I personally like 2.5.0002 Hope this helps.

Command Option Left/Right Key Doesn't Work

10.6.8 Snow Leopard,
Command+Option+Left/Right Key stop working.
I couldn't move tab, or play previous movie file nor next one.
http://codereview.chromium.org/273032
I've tested the other keys work, but just CMD+OPT+Left/Right Arrow hadn't.
Is there any quick repair or solution?

10.6.8 Snow Leopard,
Command+Option+Left/Right Key stop working.
If this is not in the standard apple keyboard shortcuts and not something you added to the Keyboard Shortcuts preferencs then it's an app specific extension and not Snow Leopard's (i.e., Apple's) problem.

Command-Left/Right Arrow not working

Very strange behavior I'm seeing today.
My left/right arrow keys work. Even Option-Left/Right works correctly.
But, Command-Left-Right do not work. No movement at all.
Curiously, Shift-Command-Left/Right work fine.
I've not changed any keyboard shortcuts recently. I've checked the keyboard shortcuts that are currently defined. Nothing that would indicate a problem, but clearly there is.

Just found a solution that worked for me here. Basically, it seems to be a bug with the Dock. If you type "killall Dock" (the command is case-sensitive) into the command line in Terminal, it restarts the Dock. After that the arrows seem to work normally again.

Working through David's book - trouble with Control-Left/Right Arrow

I have worked my way through David Nahmani's book in the Apple Pro Training series and it is EXCELLENT! It's the best investment I've made in a long time. The investment I made in the new computer and software would be so much less AWESOME had I not found this little gem. I do have a question, though...
When it comes to the command keys, I can't get the Control-Left/Right Arrow commands to work. They are supposed to be zoom keys - but they just wipe my window left and right. I'm probably doing something wrong. Anyone know what it is?
Thanks in advance for your help.
Gina

Gina,
The problem is that Control + Arrow Keys is the default key command to switch between Spaces (window sets) in Leopard. So, here's what you do:
1. Open System Preferences
2. Click on "Exposé & Spaces" (top row, fourth icon from the left)
3. Click on the "Spaces" tab
4. In the bottom portion of the window you'll see a section for "Keyboard and Mouse Shortcuts", in the second pulldown menu change the setting from "^ Arrow Keys" to another of the choices. I personally use the second choice, which is Command + Option + Arrow Keys.
Now, back in Logic your Control + Arrow Keys should be controlling your Arrange window zoom.
Hope this helps!

Icloud photo library won't work unless connected to wifi. If I am trying to attach a pic to a message or email, I get the error "photo can't be downloaded from iphoto library, please try later." If I connect to wifi it works just fine.

If I am trying to attach a pic to a message or email, I get the error "photo can't be downloaded from icloud photo library, please try later." If I connect to wifi it works just fine. If it's truly "storing" a low res version on my phone it shouldn't have to download anything. I can understand the uploading of pics to library only being done over wifi, but there are plenty of times I'm going to want to send a pic when I'm not going to be near a network. It does work occasionally, but the norm is that I get the error.

Hi Ed,
There is issue with Windows 7 when you send the email. It gives the message you specified.
But you can always use Adobe Email client to send your images. In this workflow also you would get the error message but you can ignore it and continue to send the mail.
Thanks,
Sourabh

Hi, i ve just brought a new pc ,we have transferred all our files but for some reason my daughters litunes library works , but mine does nt , its there but you cant play any songs from my list. my nano is older than my daughters. can anyone help?

hi, just brought a new pc i have transferred all the files, but cannot access my itunes library to play music on the pc, its on the pc , but it wont let me play music. my daughters library works though, but she has a newer model than mine. how can i access my old library? at the moment the pc says all i can do sync my ipod , but that means clearing my songs and having my daughters library imported to my i pod thus losing my songs. is there anything i can do to restore my library?

iPod Nano: Multiple Users- Single iTunes

My Apple TV willl no longer access my "owner's library" in iTunes. It had been working just fine... then nothing. I've been checking discussions, and trying suggestions, but nothing seems to work.

My Apple TV willl no longer access my "owner's library" in iTunes. It had been working just fine... then nothing. I've been checking discussions, and trying suggestions, but nothing seems to work.

Have you restarted everything including your router?
Don't suppose you've added any new security software or firewalls to the computer?

Alt shortcuts not working for alt-left/right or for é, í etc

Hi guys,
I've had this problem for a while now… Essentially, the issue lies in the alt-shortcuts for left and right where one is usualy able to 'word jump', and the creation of accented characters like é and í using the alt-e shortcut. All other alt functions appear to work fine for the moment. The alt-left/right shortcut still works when shift is held down, and highlights all the characters that have been passed over, as it should. The output for alt-e is completely blank, and the alt-left/right output is nothing, unless shift is also held.
I have a British English MacBook Air keyboard on Mountain Lion, and I have set it to that layout, and I regularly switch between this and greek for scientific formulæ. I've fiddled around with language and input settings trying to get it to work again to no avail, and there are no shortcuts programmed to that to my knowledge. I have checked on a guest account and it seems to be account specific. Ideally I'd like to keep this account without migrating everything over - does anyone have any ideas with regards to how to track down where the problem is?
Thanks in advance to any responses!

If only alt + e is not working, double check system preferences/speech to make sure it has not been set as a trigger for text to speech or speech recognition or whatever.

I have a symbol that has appeared on my iphone 4s top right just left off the bluetooth sign, it's an arrow on a circle with a padlock in the middle any idea where it came from and what it is

i have a symbol that has appeared on my iphone 4s top right just left off the bluetooth sign, it's an arrow on a circle with a padlock in the middle any idea where it came from and what it is

That's the portrait orientation lock (keeps the screen from rotating to landscape mode). To turn it off, double-tap the home button, swipe the list at the bottom to the right, then tap the left-most icon (to the left of the music controls).

Magic Mouse left right swipe not working

I got the mouse with my computer about a month ago. And suddenly, the left/right swipe has stopped working. I've wiped down the top and changed the batteries. I restarted. It doesn't seem to be working.
Has anyone else had this problem? Does anyone know how to fix it?

Take it back to Apple and get a new one, yours is still under warranty.

I have just made a clean instalation of Lion, with a bootable disk, and I planned to restore my files (music, photos, etc.), but Lion doesn't find my backup files. So, I'm about to loose all of my iTunes library, work docum The installation run perfectly,

I have just made a clean instalation of Lion, with a bootable disk, and I planned to restore my files (music, photos, etc.), The installation run perfectly, but Lion doesn't find my backup files. So, I'm about to loose all of my iTunes library, work documents (I'm a lawyer!!), my kid's photos.... How can I restore my files?? Help!!

Since you seem to be using a new disk for Lion, Time Machine will consider previous backups to be for a "different" computer. Try doing a control-click or click-and-hold on the Time Machine icon in the Dock, then choose "Browse Other Time Machine Disks". This should allow Time Machine to see the previous backups.
In the worst case you should be able to open those Time Machine backups and copy your documents from there to your home folder.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

Multi Monitor - Windows Key + Left/Right not working?

Hi everyone,
Just checking whether it's just me or other people having this issue (I can't find a similar thread for the Windows 10 Technical Preview).
Windows Key + Left/Right does not seem to snap to another monitor. On my setup it continually cycles on the monitor it's already on (Left/Mid/Right), but does not jump across to the next monitor when it hits the end.
Is this an intended change in the Technical Preview? Is anyone else having the same behaviour? If not, any suggestions on troubleshooting it?
Thanks!

Apparently this is an intended part of the new virtual desktop system. It also affects the Shift-Win-Up maximizing the window, and Shift-Win-Down minimizing it... they now function with a double-tap of the Up or Down. But unfortunately Shift-Win-Left
or Right will just move around on whichever single screen the application is now on, regardless of how many monitors you actually have.
Just to clarify, do you mean the feature to snap/cycle to other monitors was intentionally removed? Or due to other changes to snap it's had this adverse affect?
The ability to Windows Key + move to other monitors is highly useful, and often much quicker than dragging/dropping to move to another monitor. I hope this is just an oversight and will be reverted!
Thanks to others for your feedback and info too, glad to know I'm not the only one encountering this issue.

Apple Magic Mouse--right click not working, left-right scroll not working

Brand new out of the box, right click does not work and neither do the left-right swipe. Is it likely I have a faulty mouse, or is there a software update or setting I have failed to find? Running 10.6.4 on brand new MacBook Air. Experts--help please

I have the same issue. My magic mouse is only about a year old and i honestly don't use it that often... it seems to me the right click is not "connecting" well as i have to click several times or very hard to get it to make a clicking sound. not sure if its stiff or broken or not.
Overall I'm pretty frustrated as this thing was EXPENSIVE.
Any ideas how to fix it?

Compare in Library works just left / right ?

Similar Messages

Maybe you are looking for