Compare Solaris based processor and Intel processor for EBS

We are planning to migrate our 9i database and Application(11.5.10.2) from Solaris to Linux.
Also planning for some major hardware changes.
We want to compare sparc V9 processors and Intel Processor.
Please let us know any documentation which compares both processors
- Bench marck for Solaris and Inter processors
- Any calculation like 1 Inter processor = n Solaris based processor
- Any other related topics .
Thanks
TT

Hi,
Please see the links referenced in the following threads.
Hardware for Oracle E-Biz R12(12.0.4)
Hardware for Oracle E-Biz R12(12.0.4)
Hardware requirements for Oracle APPS
Hardware requirements for Oracle APPS
Question Regarding R12
http://forums.tangosol.com/forums/thread.jspa?threadID=861380
Sizing..
Re: Sizing..
Regards,
Hussein

Similar Messages

Processor and Graphics query for G4 PowerMac 'Digital Audio'

Hey all, two questions here...
Question 1
Ive got ANOTHER new processor and graphics card for my Digital Audio G4. The processor i had in it before was a Sonnet Encore ST/G4 1GHz, ive replaced this with the same make of processor but at 1.4GHz. The processor works fine and the machine runs fine, but it isn't listed properly in the system profilers...
In OS9 it's speed is described as "about 656Mhz" and in OSX its described as 0MHz!
Im not too worried since everything seems to be working fine, but i want to be sure that its not going to suddenly blow up on me, and if anyone else has had things like this happen with these processors or configurations. Ive still got the 1GHz should anything go wrong, but newer, more powerful stuff is always good!
Question 2
The new graphics card i put in is a ATI Radeon 9600 Pro PC & Mac Edition. Ive read a few things on the internet about it sometimes not working with DA Power Macs but thought id chance it anyway, i can always sell it on if it didn't work...
Well the card works in both OS9 and OSX and displays everything fine, its recognised by both systems and everything. The only problem is i can't change the display settings, on both systems the only display option ive got is x736 (or whatever it is thats closest to it), there are no other options available, i can't choose anything else in the Recommended menu, not can i change from Thousands to Millions of colours.
Of course its generally agreed that these cards work better on G5s than G4s, despite it saying on the box that it supports G4s. Ive also downloaded the ATI Displays Control Panel to see if i can control it that way, but to no avail. Does anyone have any info or words of advice on this?
Cheers all!

Good to hear, thanks!
Do follow the advice to add as much cooling as you can, & use the best Ceramique Thermal Paste you can find.
Did you clear all the Caches yet?
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.
Look for the 10.3 version of AppleJack 1.4.3.1 (326 KB) (For Mac Jaguar and Panther), here...
http://mac.oldapps.com/applejack.php

Remote Desktop and Intel processors

Does Remote Desktop work well on Intel processors working as a VNC server? I do not see a Universal icon on the Remote Desktop website so this would run through Rosetta if I am correct.
Dual 2.7 Ghz G5 Mac OS X (10.4.6)

I'm not exactly clear on what you're asking here so...
The client software installed on the Intel based CPU's will allow you to log in and control/observe the Intel based client just fine. Simply turn it on and configure as you would a PPC based machine.
If you want to use the Intel based CPU as an admin (to control/observe FROM), you will need to use the Rosetta hack described in other threads.

Powerbook G4 and Intel processor

NBCOlympics.com allows viewing Olympics video but only if you have Intel processor. I have a Powerbook G4 - is there anyway to change this to intel processor?

Welcome to Apple Discussions!
There is no technical reason why the Olympic committee couldn't have chosen a Mac OS X native video format that works on PowerPC Macs. But they obviously didn't. They are the one you should address your complaint to. Tell them that Macs have had video capable formats of streaming live TV since at least 1995. Intel Macs have only been around since 2006. They are excluding 11 years of Mac models at a bare minimum if not more. You know how I know 1995 was a year that could happen? Streaming videochat was available on a PowerMac 9500 using Cu2seeme based on Apple's own Quicktime codecs. No reason that couldn't have been used in the Olympics for those with older machines.

JVM's suport for multicore processors and multiple processor systems

Hi all,
Do you have any concrete information about Sun Hot JVM 1.5's support for multi-core processors and also its support for multi processor systems. I ask this because i am looking at deploying a multi threaded application written in Java 5 and want to know the best CPU arrangement for optimal performance.
Does JVM run itself on multiple CPUs?
Does JVM run native threads on multiple CPUs ? at the same time.
Is there a place where i can find out the exact behavior of the JVM in sus environments ?
Thanks.

Hi,
Sun's JVM runs very well on multi-thread/core/chip systems and provides several mechanisms to scale well in such environments (for example Thread Local Allocation Buffers (TLABs), parallel gargabe collection threads etc.). Java threads are 1:1 mapped to operating system threads. There are lots of options that allow you to configure the JVM wrt number of gc threads and so on, although the defaults should in most cases work well. There is a lot information available at http://java.sun.com/docs/performance/index.html and some (quite outdated) information about threading at http://java.sun.com/docs/hotspot/threads/threads.html.
Nick.

Questions on Rules-Based ATP and Purchase Requisitions for STOs

Hello experts,
We are working on rules-based ATP configuration and have several questions about the functionality. Iu2019m hoping that some of you are using this functionality and can help give us direction.
In our environment we have multiple distribution centers and multiple manufacturing plants. We want to confirm sales orders against stock and production orders in any of those plants, depending on the locations that have stock or planned production. For example, we will place a sales order against plant A. If there is not enough stock in plant A then rules-based ATP will use location determination to check in plant B, then C. The scope of check on the ATP check will include stock and released production orders. We will configure plant A as the u201Cconsolidation locationu201D so if stock is found in plants B or C then stock transport orders will automatically be created to move the stock to plant A before shipping to the customer.
We have configured rules-based ATP and this functionality is working well in our Development system. The ATP check is executed and uses the rules-based ATP to find eligible stock in other plants. The system is also creating purchase requisitions to move the stock to the consolidation plant.
Our first concern is that there doesnu2019t appear to be any firm linkage between the sales order and the resulting purchase requisition. For example, if we create sales order 123 for plant A and the rules-based ATP finds stock in plant B it automatically creates a purchase requisition 987 to move the stock from plant B to plant A. However, there doesnu2019t appear to be a linkage between sales order 123 and purchase requisition 987. For instance, if we delete sales order 123 the purchase requisition doesnu2019t get deleted.
Our second concern is that the quantity on the purchase requisition can still be confirmed against later sales orders. For example, say the above scenario resulted in a purchase requisition 987 that consumed all the stock available in plant B. We then create a second sales order 456 for the same product. Plant A is out of stock so the rules-based ATP looks in plant B. We would expect that plant B would also not have any stock because itu2019s all been consumed by the purchase requisition. Instead, the system creates a second purchase requisition to move quantity from plant B to plant A. Itu2019s as if the system doesnu2019t realize that the purchase requisition 987 is already planning to move stock out of plant B.
Does anyone have any thoughts or suggestions on these two scenarios? Is there a way to configure the system so there is a hard linkage between the sales order and the purchase requisition so that if the sales order is deleted then the purchase requisition is also deleted? Should ATP realize that purchase orders are consuming inventory and not allow later sales orders to confirm against that same inventory? Any advice or experience would be greatly appreciated.
Thanks,
David Eady
Application Delivery Team Lead
Propex, Inc.

Hi,
The scheduling is done in SCM, and from there, whenever the RBA is triggered, the calculation is done always with the old route in SCM. Until you get back to R/3 this is when your route is determined. But the ATP check is always with the original route. So the idea would be that you change the values of the route while still in APO, this is possible via the user exit. Should be done in scheduling in APO.
Hope this information is helpful.
Regards,
Tibor

HT203177 I have a 2TB Imac, 10.7.2, with 2.8 processor and Intel Core i7, with 16 Gb of memory, and 1067 MHz DDR3. I have tried to backup to a WD 4TB. It ran for almost 7 hours, and then the little box came up saying it had 5 seconds, but would not stop.

I have tried backing up my iMac using Time Machine. I have 727 GB on the 2 TB internal hard drive. I am trying to back up to a 4TB WD extrnal hard drive. Everything seems to work fine, even though it took almost 7hours to go through the process, then the little progress box should it had 5 seconds left, but it kept running and running for another 4 hours, until i finally shut it down.
The WD hard drive shows that it has used 1.61 TB on the disk, but I cannot find anything in Time Capsule. I open the hard drive to see what is on it, and it just shows that it is in progress.
I'm lost and looking for suggestions.

iTunes for Mac
http://support.apple.com/en-us/HT201693
http://www.apple.com/itunes/download/
Was it installed before? Does it show up in Software Update?
Do other updates show up there (realizing that Lion is not getting all the updates anymore as it is no longer being supported).
Apple Downloads
- Always a place to manual download.
MacBook Pro
Mac OS X Lion System Communities

Is it possible to install mac os on my intel motherboard and intel processor.

Hello Guys,
I am Huon and I want to install mac os on my pc. I have system with Intel Core 2 Duo Processor 2.66 GHz, 1066 MHz with 1gb RAM. I am ready to increase RAM of my system. I am just student so I am not able to purchase new mac but I am learning iPhone application. I just want to know that is it possible?
I hope any one of you will reply
Thanks in advance for my help.
Regards,
Huon

Yes, you most certainly can install something like it on your Intel computer!
All you need to know if it's 32 bit or 64 bit
secret page
http://www.oslike.se/

Just upgraded an iMac with 4GB Memory and Intel Processor from 10.6.8 to Mavericks and Quicktime plays m4v files with stuttering audio

I just upgraded an iMac with 4GB Memory and 3.33 Ghz Intel Core Duo Processor from 10.6.8 to Mavericks. I now have Quicktime 10.3 which plays m4v files with stuttering audio. This is a nightmare as I use Quicktime a lot in my research. I have seen similar threads but so far only reporting the problem. For now I have installed Quicktime Player 10.7 (which appears in utilities, leaving Quicktime 10.3 in the main applications list) which plays the same videos with no problem, but it would be good to know if anyone has managed to find a workaround at all, or know if Apple have plans to do anything about it?

Slow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts.

Linux-PHC and Intel processor

Hi!!
I'd like to use PHC. I've installed everything. I've got VID for my processor. I've added 2 lines to my /etc/rc.local:
echo "10:35 8:6 6:6" > /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
echo "10:35 8:6 6:6" > /sys/devices/system/cpu/cpu1/cpufreq/phc_controls
And the first line works, but the second not. I don't know why it happens.
I really appreciate any help
stefek

uname --processor

Scalability to Multiple Processors and Faster Processors

To what degree do Final Cut Studio's compute-intensive operations, such as rendering video or creating DVD content, scale by number of processor or clock rates of those processors.
More to the point, to what degree would I expect going from a dual 2GHz G5 machine to a quad (i.e., dual, dual-Pentium) 3GHz machine to approximately triple the throughput of such operations?
Thanks for the ideas!

I see some benchmarks on Apple's website regarding the new 8-processor Xeon machines.

Best topology for OBIEE and BI Apps for EBS

Hi,
I am working as Oracle Applications DBA. Now i have an oppurtunity to implement BI Apps. I was wondering what is the best topplogy for implementing this.
We are solaris shop so we already got new two servers.
Could any one tell me how i should split the following components between two servers.
1. Oracle Database 11g (11.2.0.2)
2. OBIEE 11g (11.1.1.5), Web logic server
3. Informatica (9.0.1 hotfix 2)
4. Oracle BI Apps (7.9.6.3)
5. DAC
Thanks

There is no way that question could be answered with the information that has been provided.
Cheers
John
http://john-goodwin.blogspot.com/

Mac 2.4ghz processor and Lightroom 4

I have a Mac computer with 2.4ghz and 3gb of ram. Can I use Lightroom 4 or do I need to upgrade the computer. Thanks Fred

Here are the system requirements for Lr 4.3 for Mac from Adobe's website:
System requirements
• Processor: Multicore Intel® processor with 64-bit support
• OS: Mac OS X 10.6.8 - 10.8
• RAM: 2GB of RAM
• Hard Disk: 1GB of available hard-disk space
• Display: 1024x768 monitor resolution
• Internet connection required for Internet-based services*
I would like to add that with 2 GB of RAM you won't have much joy using Lr. Gor for at least 8 GB - 12 Gb is better - and you won't need 16 GB.
For more info: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5520

Tiffsplit crashes on Solaris (sparc and intel), okay on Linux

Hello experts,
I have a tiff file that causes a crash with tiffsplit when run
on Solaris (both Sparc and Intel) but not on Linux.
It works successfully on
Red Hat Linux 2.4.18 -- libtiff.so.3.5
but crashes on
Solaris 9 on Sparc -- libtiff.so.3.7.1
Solaris 9 on Sparc -- libtiff.so.3.9.4
Solaris 10 on Intel -- libtiff.so.3.8.2
It's crashing at a call to
TIFFGetField(in, TIFFTAG_GROUP3OPTIONS, &v)
and pstack shows stack trace like
$ pstack /var/core/core.tiffsplit.15965
core '/var/core/core.tiffsplit.15965' of 15965: /usr/local/bin/tiffsplit file.tiff
ff32a4e8 _TIFFVGetField (26280, 124, ffbff260, 67, 27e48, 2a) + 1a0
ff3498f0 PredictorVGetField (26280, 124, ffbff25c, ff3213c4, 3, 26288) + 30
ff32acd0 TIFFVGetField (26280, 124, ffbff25c, ff34d838, ff34d848, ff34d858) + 70
ff32ac50 TIFFGetField (26280, 124, ffbff2a4, 0, 0, 26000) + 1c
00011754 tiffcp (26280, 285f8, ffbff321, ffbff318, ffbfffdd, 404) + 1f8
0001135c main (fffffffe, 285f8, ffbff7a0, 26130, 0, 0) + 98
0001115c _start (0, 0, 0, 0, 0, 0) + 5c
Running tiffinfo produces following:
$ tiffinfo file.tiff
file.tiff: Warning, unknown field with tag 292 (0x124) ignored.
file.tiff: Warning, unknown field with tag 326 (0x146) ignored.
file.tiff: Warning, unknown field with tag 327 (0x147) ignored.
file.tiff: Warning, unknown field with tag 328 (0x148) ignored.
file.tiff: Warning, unknown field with tag 37680 (0x9330) ignored.
TIFF Directory at offset 0xb156
Subfile Type: (0 = 0x0)
Image Width: 1728 Image Length: 2162
Resolution: 204, 196 pixels/inch
Bits/Sample: 1
Compression Scheme: LZW
Photometric Interpretation: min-is-black
Date & Time: "2010/07/28 14:19:00"
Software: "....."
Orientation: row 0 top, col 0 lhs
Samples/Pixel: 1
Rows/Strip: 56
Planar Configuration: single image plane
Page Number: 1-1
Predictor: none 1 (0x1)
file.tiff: Warning, unknown field with tag 292 (0x124) ignored.
file.tiff: Warning, unknown field with tag 326 (0x146) ignored.
file.tiff: Warning, unknown field with tag 327 (0x147) ignored.
file.tiff: Warning, unknown field with tag 328 (0x148) ignored.
TIFF Directory at offset 0x14512
Subfile Type: (0 = 0x0)
Image Width: 1728 Image Length: 2162
Resolution: 204, 196 pixels/inch
Bits/Sample: 1
Compression Scheme: LZW
Photometric Interpretation: min-is-black
Date & Time: "2010/07/28 14:19:00"
Software: "......."
Orientation: row 0 top, col 0 lhs
Samples/Pixel: 1
Rows/Strip: 56
Planar Configuration: single image plane
Page Number: 1-1
Predictor: none 1 (0x1)
What could I do to make it work properly on Solaris 9 on Sparc ?
Thanks for your help.

You should have no problems if both are using Sun's Java Runtime enviroment. I believe there are some problems with Microsofts implementation of Java, but I don't know exactly what.

VT with Satellite P300 and Intel Core 2 Duo T5750

Hello there,
i recently bought a new Satellite P300 Notebook to be able to work with virtualisation technics. Unfortuanately, there is no "VT"-mark in the bios. Is there any possibility to activate the "VT"-Technology? I know that there are many posts about this topic, but they aren't very helpfull, because i already looked up my processor and intel says that it is "VT" capable...
Thanks a lot for your answers :-)

I started working as a Computer Technician about 4 weeks ago and this notebook was the cheapest way to try different systems (because it's quick enough!). The company i work for has many different clients who have very many different systems (also 64bit systems) so i wanted to use virtual machines to evaluate different problems... And without VT enabled a can't evaluate a 64bit virtual machine... So, if you are right (what i do think) then i've got a good notebook which is only good for "normal" business or homeuse... But thank you very much for your answer!

Compare Solaris based processor and Intel processor for EBS

Similar Messages

Maybe you are looking for