Comparison between 2 Asus Gaming Notebooks

I'm about to order an Asus Gaming notebook from internet and I'm stuck between two. Could you please tell me which one should I pick and why? Thanks
Asus G75VW- DH71    vs     Asus G75VW- DS71
Solved!
Go to Solution.

I'm seeing mixed reports about the processor. Some sources say 2.4Ghz for the DH-71, while others say 2.3 Ghz. 
Another difference appears to be the operating system. DS71 is Win7, DH71 is Win8.
The 0.1Ghz isn't going to be a noticable difference. So, either... DS71 for Windows 7 and a Blu-Ray capable drive. DH-71 for Windows 8 and no Bluray ability. 
If the prices are the same, I'd probably go with the DS71, but only because I'm not ready to transition to Windows 8, and the BR drive is a nice little bit of future-proofing, even though I may not use it.  

Similar Messages

  • FW: MSI flagship gaming notebook, GT80, featuring mechanical keyboard

    An article from professional gaming media...
    At MSI Beat IT 2014 Grand Finals, all gamers' curiosity were strongly excited after glancing at GT80, an unprecedented gaming notebook with mechanical keyboard embedded. Invited by Marc, product manager of MSI GAMING notebook, we have the chance to visit the MSI GAMING Room again for an exclusive interview of the flagship gaming geek!
    < GT80 is the first and only one gaming notebook featuring MX Brown Cherry keyboard in the world. >
    <Pull out the keycaps and the Cherry MX Brown switches are right in your sight.>
    As a senior professional gamer and MSI GAMING notebook fan, Marc went through all sorts of hardships in using the mechanical keyboard with a firm hand. " It is rather the sense of gaming than not otherwise! There is no compromise! So, I have been planning to integrate the mechanical keyboard into the gaming notebook for 5 years." In fact, it is a mission impossible to stuff it in the limited space that is really contrary to the decent design of a notebook.
    < The scheme of this gaming notebook has been in Marc's mind for 5 years. >
    < This manuscript is Marc’s momentum in creating the GT80. >
    After long communication and technical evolution, MSI is ready to take a shot at the risky and bold adventure. The position of the GT80 keyboard gets closer to the player instead of the monitor, in contrary to the traditional concept. "All, so to speak, are about repeatedly researches and trials, not just to be a maverick.” Marc also invites SoBaDRush, the ex-Zerg King, to show us.
    Little dragon: WOW! I am in!
    Most people would place the mechanical keyboard like this, but it is a little far away from the monitor...>
    <The original position is comfortable, but too close to see the bottom screen for the height of the keyboard and hands. >
    As a professional commentator and gamer, SoBaD, contributes some great ideas to the design of GT80. "Most MOBA and StarCraft II, my favorite, gamers choose MX Brown Cherry keyboard. That is why we insist on such kind of keyboard." Actions speak louder than words. The photographer stopped his work and was brought to the experience of the GT80 under the encouragement.
    <SoBaD: WOW! This works for me! >
    < But, my wrist seems to be bent into an odd angle. So...the best place should be...>
    < Yes, this is where the keyboard should be! >
    Surprisingly! We see that MSI reproduced the perfect curve of the keyboard on GT80, higher outers and lower inners. MSI's persistence and efforts to achieve the sense of gaming are blatantly shown in its perfect coordination between size and comfort even while chocolate keyboards are still taking the lead in current notebook market.
    <Compared to traditional keyboards, the keycaps are all about the same in height. >
    To the sense of touch, though each space between keys seems to be a little smaller in visual, we feel no difficulty in typing and touching as compared to traditional keyboards. MSI casts a strike and shows its collective wisdom and passion in gaming, totally standing by gamers' side.
    < Bravo! MSI reproduced the perfect curve of what a mechanical keyboard on GT80 should be, higher outers and lower inners. >
    <GT80 highlight! Switch independent graphics card with a single key.>
    < GT80 takes only less than 1 minute to reboot and back to game for its SSDs. >
    MSI also dedicates a lot of efforts to the design of function keys. The right touch pad can be shifted to number pad by "num" key as well as the manually controllable cooling fan and the switchable independent and embedded graphics card. Nowadays, some brands are studying to apply the one-key-shift function for environmental protection, easy operation and power saving, MSI really impresses us.
    <>The combined touch and number pad is another smart design of the GT80 to save more space.
    <Due to the intuitive chassis design, the gadget-crazed gamers could enjoy upgrading their key parts easily. >
    All in all, GT80 deserves the MSI GAMING notebook flagship, pushing the boundaries of the CPU and GPU, advancing the sense of touch and getting closer to gamers' Utopia. For gaming enthusiasts, GT80 will certainly be on the hit list!
    <Get creative with your keyboard using the complimentary keycaps and puller in the package! >
    <MSI GT80 takes the helm of the gaming notebook to the ideal realm.>

      wow~~~mechanical keyboard!!!

  • Performance end to end testing and comparison between MPLS VPN and VPLS VPN

    Hi,
    I am student of MSc Network Security and as for my project which is " Comparison between MPLS L3 VPN and VPLS VPN, performance monitoring by end to end testing " I have heard a lot of buzz about VPLS as becoming NGN, I wanted to exppore that and produce a comparison report of which technology is better. To accomplish this I am using GNS3, with respect to the MPLS L3 VPN lab setup that is not a problem but I am stuck at the VPLS part how to setup that ? I have searched but unable to find any cost effective mean, even it is not possible in the university lab as we dont have 7600 series
    I would appreciate any support, guidence, advice.
    Thanks
    Shahbaz

    Hi Shahbaz,
    I am not completely sure I understand your request.
    MPLS VPN and VPLS are 2 technologies meant to address to different needs, L3 VPN as opposed as L2 VPN. Not completely sure how you would compare them in terms of performance. Would you compare the performance of a F1 racing car with a Rally racing car?
    From the ISP point of view there is little difference (if we don't want to consider the specific inherent peculiarities of each technology) , as in the very basic scenarios we can boil down to the following basic operations for both:
    Ingress PE impose 2 labels (at least)
    Core Ps swap top most MPLS label
    Egress PE removes last label exposing underlying packet or frame.
    So whether the LSRs deal with underlying L2 frames or L3 IP packets there is no real difference in terms of performance (actually the P routers don't even notice any difference).
    About simulators, I am not aware of anyone able to simulate a L2 VPN (AtoM or VPLS).
    Riccardo

  • Insight the Ultimate Weapon, MSI GT60 2PE Dominator Pro 3K IPS gaming notebook!

    Just hands on this ultimate gaming machine of MSI GT60 2PE Dominator Pro 3K IPS version with Super Pack from the market, it took me over $2500 but really more than worth of it after I got great gaming experience!
    Let’s take a first look on the packing; GT60 Super Pack comes with big carton.
    Open the carton; it comes with big color box and a gaming backpack.
    Take both of them out, the box design is real gaming style with fantastic dragon logo, so as the gaming backpack.
    Take a look at the sticker on the box, it exposure why this GT60 Dominator Pro so valuable and special.
    Items   Description
    CPU:   Core i7 4800MQ @ 2.7GHz, boost to 3.7GHz
    Graphics:   GTX880M 8GB GDDR5, CUDA Core 1536 Unified
    Display:   2880x1620, 3K resolution IPS vivid panel, 350nits.
    Storage:   3xSSD 384GB Super RAID 2, 1TB HDD, BluRay Combo
    Memory:   8GBx4, 32GB DDR3L-1600
    System:   Windows 8.1 64bit English
    Internet:   Killer Doubleshot GB LAN, WiFi 802.11 b/g/n
    Display Output:    2x Mini Display Port, 1x HDMI, 3+1 display at same time
    IO ports:   3 USB3.0, 1 USB2.0, Aux In, Mic In, Headset out, Aux Out
    Dimensions/Weight:   395 x 267 x 34~55mm, 3.48kg with 9 Cell battery
    Open the color box you will find 2 black boxes inside.
    One on the left is the GT60 Dominator Pro 3K IPS, the right side one is full of surprise! These gaming style accessories only comes with Super Pack version, not every GT60 Dominator Pro will have these great gaming gears together.
    The gift box comes with Gaming headset, Gaming mouse, Gaming pad and Top Player Top Choice stamp tool. SteelSeries is really great and famous on gaming gear devices; MSI is also great on gaming notebooks, they are too professional to co-work with SteelSeries!
    The SteelSeries KINZU gaming mice, 3200dpi/1600dpi, very accurate optical mouse for 3K resolution monitor.
    Put the mouse on the mouse pad, with the fancy Dragon tattoo makes me feel I am ready to play games, Top Player Top Choice!
    The SteelSeries SIBERIA V2 gaming mouse, this is high quality headset and customized version for MSI gaming notebooks with fancy MSI dragon tattoo!!
    Take a look on the customized artwork, the dragon tattoo on the metal cover of both set, and the Dragon gaming logo in the headset as well, that makes this headset more gaming style and looks powerful!
    This Gaming headset belongs to MSI notebook accessories! The sound quality is really good, detail is clear on mid and high frequency, subwoofer is powerful and really suitable for gaming, even you wear for hours still feel comfortable and stable, overall quality makes me feel it’s over $150 value!
    Very special stamp tool, I would like to put chocolate on this and stamp on the Dragon Gaming Cake!!
    Let’s start to reveal the first lady, no, the real steel of GT60 Dominator Pro!!
    Look at the surface of the design, Dragon logo with light from darkness on the cover, and the metallic material on top cover and palm rest side, which makes the GT60 Dominator Pro looks high quality and gaming style.
    Take a look on the cover side, the Dragon Gaming Logo is really fancy and stylish with backlit. Brushed metal design makes the cover looks high quality and solid.
    Sound by Dynaudio speaker system, the best famous mobile sound system on this top level GT60 Dominator Pro gaming notebook is really amazing, great on sound detail and real good acoustic of human vocal and great sound stage presents!
    We put all the accessories together and boot up to check further detail on GT60 Dominator Pro 3K IPS version! The display quality is vivid.
    Let’s take a look on the detail spec., 384GB SSD Super RAID, Intel Core i7 4800MQ @ 2.7GHz, top level GTX880M 8GB GDDR5 graphics, 32GB RAM. It’s all top level and could use for 3 more years of ultra-quality games!
    When first time to use MSI gaming notebooks, you will feel amazing about the SteelSeries keyboard is really good typing feeling and solid based. It comes with multi-color backlit and move the windows key to right side, that really professional design as a gaming notebook keyboard, and the only one with real gaming design.
    Take a look in the SteelSeries Engine, the exclusive gaming software only for MSI gaming notebooks. This macro keys software built in Keypress macro, Text macro, 1 key launch program and Disable key function, besides F1~F12, all other keys could be used for macros setup, and 4 layers of keyboards o setup 4 sets of macros with 4 sets of different backlit combinations, so this is really a great software for smarter and stylish gaming experience.
    With CPU-Z tool to check, the upgraded Intel Core i7 4800MQ @ 2.7GHz, TDP 47W, 4 Cores 8 Threads is really great performance, CPU Boost could up to 3.5~3.7GHz.
    Because of Core i7 4800MQ and GTX880M, the 3D benchmarks comes with breakthrough scores than ever on the notebook platform, 3D Mark Fire Strike: P5351 pts.
    The GT60 Dominator Pro on 3D Mark 11 gains P8461 pts, it’s whole new level of the gaming notebooks, and It’s over 15% faster than GTX780M!
    The 3D Mark Vantage boost up to P33115 scores, it’s 14% faster than GTX780M!
    Then we check on other software of DirectX11 3D performance, the Heaven Benchmark is world’s 1st software tool to test DirectX11 effects, this time we use Heaven Benchmark version 3.0 to test.
    Set the Tessellation on normal to enable DirectX11 effects and run Benchmark, the Full HD resolution could get 78.2 FPS(Frames Per Second) high score result.
    Since this GT60 is 3K IPS panel edition, of course we have to try 3K resolution, you could see that the result block is smaller at 2880x1620 resolution, the result is 42.7 FPS with same setup, so we could say that 3K resolution will reduce over 45% of the FPS rate in this test, but GTX880M is too powerful, so still over 40FPS, and most games we need to get over 30 FPS to play and feel smoother, at least 20 FPS to play a game, if lower than 20 FPS, that will makes people feel lag obviously and feel dizzy easily.
    Since we tried some benchmark, of course we have to try at least a famous game to the real world experience. Battlefield 4, the biggest FPS game title since end of 2013, is one of the heaviest loading games on PC platform.
    First we made Battlefield 4 detail at 1920x1080 with Ultra Graphics Quality setup.
    The gaming frames is 46 FPS, really smooth and around 20% faster than GTX780M.
    Once we tune up the resolution to 2880x1620, the FPS drops a lot because the Ultra mode also set 4xMSAA (Anti-Aliasing), that will impact the performance a lot in higher resolution, also make graphics memory demand around 3GB~4GB, seems the 8GB GDDR5 with GTX880M is prepared for upcoming games with such as 3K or even higher resolutions!
    We could see it’s about 24~28 FPS under 3K resolution with Ultra Graphics Quality, most time it will reduce over 40% FPS rate of the gaming performance.
    Seems to set the Battlefield 4 with “High” graphics quality on 2880x1620 resolution is more suitable to play the game smoother in every theme.
    It’s about 42 FPS, close to the 1920x1080 Ultra graphics quality. So if we want to play heavy loading games at 2880x1620 resolution, set to High graphics quality setup is a good option for 3K gaming!
    After these 3D and gaming tests, let’s take a look on the temperature of the cooling system. The room temperature is 25 degree C, the temperature of fan out part is 71.2 degree C, it’s not a surprise because of GTX880M and Core i7 4800MQ, even it’s a bit lower than most gaming notebooks with this 2 combinations. The palm rest and keyboard side is 30.6 degree C, it’s really cool for users to hands on.
    After the fabulous experience of great 3D performance, let’s take a look on the benefits of “Super RAID 2”, normal 2.5” HDD is about 80~100MB/s, single SSD is about 400~550MB/s, BUT, GT60 Dominator Pro boost over 1536MB/s and average is 1477MB/s, that’s 15x faster than single HDD, almost 3x faster than single SSD.
    If we check on the AS SSD Benchmark tests, you could see more detail of the storage access performance is amazing, the Sequential read is 1116.76MB/s, write is 786.79MB/s. 4K-64Thrd read is 665.09MB/s, write is 461.18MB/s, it’s ultra fast!
    The GT60 Dominator Pro 3K IPS edition comes with Killer Doubleshot LAN and WiFi, it provides faster response time of gaming experience, when you at different LAN/WiFi environment, Killer software will ask you to make an internet speed test, this will fine tune your LAN/WiFi for smoother and faster online experience.
    MSI also got a new software tool called “Dragon Gaming Center”, this tool is also good for hardware monitor and utility launch tool. Also could show the status of Hybrid Power enable or disable.
    The ultimate weapon for enthusiast gamers:
    The GT60 2PE Dominator Pro 3K IPS version is extremely powerful, it comes with most of the features that a great gaming notebook could have, 3K IPS panel is really great effect of vision quality, SteelSeries keyboard with SSE is amazing for gamers to play their games smarter, Sound By Dybaudio present really good detail sound quality, Killer Doubleshot is faster for online gaming, of course the GTX880M is awesome for gamer to play Full HD even 3K resolution games, the backlit of Dragon logo and keyboard is really beautiful.
    Conclusion:
    The overall score I will give this GT60 2PE Dominator Pro 3K IPS edition with Super Pack is 95 out of 100, this is really great machine for any hard core gaming or power user usage, I would recommend any one to must-have this notebook if it’s affordable for you!!
    Game Performance:   ★★★★★★★★★★
    Storage Performance:   ★★★★★★★★★★
    Gaming Design:      ★★★★★★★★★☆
    Sound Quality:         ★★★★★★★★★★
    Keyboard:         ★★★★★★★★★☆
    Online speed:         ★★★★★★★★★☆
    Price Range:         ★★★★★★★★☆

    Ok either you work for MSI or you changed the settings in 3dmark11. I only scored around 5K with my GT60 2PE 3k. Any idea why I'm scoring 3k below you? Laptop was plugged in btw. Also how can you enter bios settings with this laptop? I suspect that maybe the hybrid gpu thing is affecting my score, and the Pc is probably not fully utilizing the GTX 880M, maybe in bios I can disable the integrated CPU's video card??? Please let me know. Thanks.

  • (CES2014)MSI gaming notebook photo gallery

    MSI Computer Corp, leading manufacturer of computer hardware products and solutions, unveils its 2014 lineup during CES in Las Vegas. On display at the MGM Skyline Marquee Suites will be MSI’s next-generation GT, GE and GX gaming notebooks, Quadro workstations for mobile professionals, tablets, touchscreen laptops, a brand new 24-inch All-In-One Gaming PC and the recently released 3K GT60.
    MSI’s 3K GT60 features a WQHD+ 3K display and is the world’s first model to utilize a high resolution display on a true gaming laptop/workstation. MSI will also be displaying their AMD Kabini based W20 tablet and the AMD configured S12T touchscreen laptop.
    “MSI’s 2014 lineup of notebooks, tablets and AIOs embodies our commitment to delivering exceptional performance, constant innovation and magnificent style,” said Andy Tung, Vice President of Sales for MSI’s Pan America Region.
    CES 2014 Innovations Design & Engineering Awards goes to MSI GS70
    Full notebook line up demonstration
    More new photos, we will continue to update on this thread!!

    can't wait to see these powerfule product in the market soon~

  • So slimmest gaming notebook coming!

    Is it impossible for a gaming notebook slimmer than 2cm? MSI will make it happen!
    You think it’s Ultrabook? No, it’s the slimmest gaming notebook coming soon!
    more it photo coming soon!

    without battery? :cool:

  • Comparison between cFP and cDAQ

    Hi,
    I'm looking for (as much details as possible) a comparisons between compact Fieldpoint and compact DAQ hardware.  I'm trying to decide which hardware platforms to use.
    TIA

    Compact Fieldpoint is for installed, industrial type applications.  It has a realtime operating system.  The controller runs code to read inputs and operate outputs.  The application can be distributed on an ethernet network.  There are different modules available for different types of inputs and ouputs.
    Compact DAQ also has numerous input and output modules.  It is more intended for portable applications.  It connects to your PC through a USB port.  So the code would need to run on the PC

  • Functional and technical comparisons between JDE version A 7.3 and A 9.3

    Hi,
    We need to convert the modules already written/designed in JDE v A 7.3 to JDE v 9.3.
    So I need to discuss with you people the functional/technical comparisons between these two versions.
    I have gone through these links to know something:
    http://www.teamcain.com/media-center/blog/oracle%E2%80%99s-jd-edwards-enterpriseone-91-and-jd-edwards-world-a93-%E2%80%93-exciting-news-ora-0
    http://www.oracle.com/us/products/applications/jd-edwards-world/jde-world-a9-3-1596334.html
    Kindly advise on it.
    Thanks,

    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    1. Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    4. CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • How to make comparison between strings using Labview

    helo, i want to know, how to make comparison between array of string.?
    the transmitter have send the assign text such as
    A hello            Bhye  Cbye

    Hi Syanitaa,
    You actually only need to post the question once. 
    Multiple duplication. Please refer to this thread.

  • [AS-CS5] Comparison between text style range and character style

    Hi,
    It's been a while since I'm not coming on this forum ...
    I'm looking to make a comparison between a "text style range" and a character style.
    I have no problems, except for the comparison of "fonts".
    myCurrentText = text for char…
    theStyle = character style id…
    I try:
           if (applied font of myCurrentText ≠ applied font of theStyle) then set theCharDifference to 1 
    The selected text give me:
           font "Minion Pro        Italic" of application "Adobe InDesign CS5.5"
    and the character style:
           "Minion Pro"
    I try "set theTextFont to font of applied font of myCurrentText" -> Error
    This is my script (it's too long to post here) <http://db.tt/BLoGPiN>.
    Loot at the "on CheckCharacterDifference(myCurrentText, theStyle)"
    TIA.
    Oli.

    I've written this, but I do not know if it covers all cases ...
    Someone?
    Thanks.
    Oli.
    set theText to item 1 of selection
    set theStyleChar to properties of character style 2
    -- analysis of the properties of the text
    set myTextFontApplied to applied font of theText
    set myTextFontFamily to font family of applied font of theText
    set myTextFontStyle to font style of theText
    -- analysis of the character style
    set myStyleCharFontStyle to applied font of theStyleChar
    if myStyleCharFontStyle = "" then
         set myStyleCharFontStyle to font style of theStyleChar
         if myStyleCharFontStyle ≠ myTextFontStyle then set theDifference to true
    else
         if myStyleCharFontStyle ≠ myTextFontFamily then set theDifference to true
    end if
    Message was edited by: OlivierBerquin

  • EhP5 Report: Actual/Actual Comparison Between Different Ledgers

    Dear all,
    Hoping that someone here has faced the same challenge and found a solution...
    My client wants to see a side-by-side comparison of the financial statements for several ledgers; ideally three, but two will do.
    It appears that EhP5 includes an enhancement of the standard actual/actual comparison report which allows a comparison between two ledgers. However, we are running EhP4, and an upgrade is unlikely to happen very soon. Do you know whether the report is available separately? Our search for a separate SAP note was unsuccessful.
    Our other alternative would be to develop a report ourselves, but if a standard solution is available, that would feel rather daft...
    Thanks in advance!

    Thanks for the advice - as the system would not let me create versions for these non-FISL ledgers, I assumed it was not possible to run the report for them at all.
    Unfortunately, I do not have the actual/actual comparison for two different years built in, nor the financial statement version, so we may still have to develop a new report (as per project standards, in BI rather than ERP)...
    Kind regards

  • Comparison between Oracle Contracts and Oracle Procurement Contracts?

    Hi All,
    I need some document which give the Comparison between Oracle Contracts and Oracle Procurement Contracts?
    And which of them are suitable for what type of contracts?
    Thanks
    Syed

    Hi,
    Any kind of help plz.
    Regards,
    Subhra

  • Comparison Between Oracle eBS and JD Edwards

    Hi All,
    Is there any site / document / any kind of referference / help on comparison between Oracle-eBS and JD Edwards mainly for Finance and SCM module please ? Need this urgently so any help is appreciated.
    Thanks & Regards,
    Subhra Saha

    Hi,
    Any kind of help plz.
    Regards,
    Subhra

  • Comparison between Purisma and JCAPS?

    I am researching several CDI (Customer Data Integration) solutions and I've narrowed this down to two solutions Purisma and JCAPS. I am mainly comparing the matching engines, record linkage efficiency and any machine learning capabilities.
    Has anyone done a "head-to-head" comparison between JCAPS and Purisma?
    Does anyone have any screenshots of the JCAPS record linkage tool for manual duplicate handling?
    My blog: http://mycodeblog.blogspot.com

    Why not write a test class? Shouldn't take long.

  • Comparison between Forms6i and Forms9i

    We have some client/server-based applications built in Forms6i and are considering to convert/rebuild them into Forms9i or JDeveloper as web-based applications. Has anyone done any comparison between Forms6i and Forms9i/JDeveloper? Or, can you point me to such documentation if existed?
    Thanks.

    For comparison between forms 6i and Oracle9i Forms check out the new features paper on:
    http://otn.oracle.com/products/forms
    Comparison to JDeveloper? How about the fact that you develop with Java language in JDeveloper and with PL/SQL in Forms.
    I would suggest that first you try to run your application on the Web using forms 6i. This should be a very simple test to do. See how you like it and only then ask yourself if you really need to go to JDeveloper.

Maybe you are looking for

  • Clients Not seeing DHCP server at branch office or not accepting ip offers (NO LOG REPORTS KIND OF IN THE DARK)

    Hi there i am having an issue that has popped up recently i have a DC at a branch office that is connected to the main office DC via a Persistent Demand Dial connection in RRAS. Everything was working properly according to me until i found out that t

  • Re: Issue while creating Proxy for remote producers

    Hi, I am getting the Same Error , Implementation is Remote WSRP . Tried all: '1' addresses, but could not connect over HTTP to server: 'localhost', port: '7001' java.net.ConnectException: Tried all: '1' addresses, but could not connect over HTTP to s

  • Version Based Downloading w/JBoss Missing Version Field....

    Here we go again, version based downloading difficulties. I cannot get version based downloading to work using the version.xml file or using file based versioning. My environment is JBoss 4.0.3 SP1 (whatever version of tomcat container this contains)

  • Problem with code-Please Help!!!

    Hey guys i have some problems with the following code: 1. I have to do a stutter and reverse of an array [ 2 4 ] and it should return [ 4 4 2 2 ]. I wrote the code and i get [ 2 2 4 4]. How can this be fixed? public class Part1      public static voi

  • How can IWD_VALUE_HELP return multiple values, instead of one

    Hello expert, I have requirement to use F4 help to return multiple values to the using WD component. Basically in my main WD component, I have a View where I have a list box, this list box has a F4 assigned to it, clicking on the F4 brings up hte F4