Comparison between HCM 8.8 & 9.1

Hi,
Is there any document or report which gives you an clear understanding on differences between peoplesoft HCM version 8.8 and 9.1
If so pl let me know the path to download the same or pl share the doc.
Thanks

Yes. You will be able to get the required information from Customer care . Search for "PeopleSoft Enterprise HRMS 8.8x to 9.1 Upgrade" ID is 942818.1, In this search for "Demo to Demo compare Results" which will give you peoplesoft changes between 2 versions.
Thanks,
Sameer.

Similar Messages

  • Performance end to end testing and comparison between MPLS VPN and VPLS VPN

    Hi,
    I am student of MSc Network Security and as for my project which is " Comparison between MPLS L3 VPN and VPLS VPN, performance monitoring by end to end testing " I have heard a lot of buzz about VPLS as becoming NGN, I wanted to exppore that and produce a comparison report of which technology is better. To accomplish this I am using GNS3, with respect to the MPLS L3 VPN lab setup that is not a problem but I am stuck at the VPLS part how to setup that ? I have searched but unable to find any cost effective mean, even it is not possible in the university lab as we dont have 7600 series
    I would appreciate any support, guidence, advice.
    Thanks
    Shahbaz

    Hi Shahbaz,
    I am not completely sure I understand your request.
    MPLS VPN and VPLS are 2 technologies meant to address to different needs, L3 VPN as opposed as L2 VPN. Not completely sure how you would compare them in terms of performance. Would you compare the performance of a F1 racing car with a Rally racing car?
    From the ISP point of view there is little difference (if we don't want to consider the specific inherent peculiarities of each technology) , as in the very basic scenarios we can boil down to the following basic operations for both:
    Ingress PE impose 2 labels (at least)
    Core Ps swap top most MPLS label
    Egress PE removes last label exposing underlying packet or frame.
    So whether the LSRs deal with underlying L2 frames or L3 IP packets there is no real difference in terms of performance (actually the P routers don't even notice any difference).
    About simulators, I am not aware of anyone able to simulate a L2 VPN (AtoM or VPLS).
    Riccardo

  • Comparison between cFP and cDAQ

    Hi,
    I'm looking for (as much details as possible) a comparisons between compact Fieldpoint and compact DAQ hardware.  I'm trying to decide which hardware platforms to use.
    TIA

    Compact Fieldpoint is for installed, industrial type applications.  It has a realtime operating system.  The controller runs code to read inputs and operate outputs.  The application can be distributed on an ethernet network.  There are different modules available for different types of inputs and ouputs.
    Compact DAQ also has numerous input and output modules.  It is more intended for portable applications.  It connects to your PC through a USB port.  So the code would need to run on the PC

  • Functional and technical comparisons between JDE version A 7.3 and A 9.3

    Hi,
    We need to convert the modules already written/designed in JDE v A 7.3 to JDE v 9.3.
    So I need to discuss with you people the functional/technical comparisons between these two versions.
    I have gone through these links to know something:
    http://www.teamcain.com/media-center/blog/oracle%E2%80%99s-jd-edwards-enterpriseone-91-and-jd-edwards-world-a93-%E2%80%93-exciting-news-ora-0
    http://www.oracle.com/us/products/applications/jd-edwards-world/jde-world-a9-3-1596334.html
    Kindly advise on it.
    Thanks,

    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    1. Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    4. CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • How to make comparison between strings using Labview

    helo, i want to know, how to make comparison between array of string.?
    the transmitter have send the assign text such as
    A hello            Bhye  Cbye

    Hi Syanitaa,
    You actually only need to post the question once. 
    Multiple duplication. Please refer to this thread.

  • [AS-CS5] Comparison between text style range and character style

    Hi,
    It's been a while since I'm not coming on this forum ...
    I'm looking to make a comparison between a "text style range" and a character style.
    I have no problems, except for the comparison of "fonts".
    myCurrentText = text for char…
    theStyle = character style id…
    I try:
           if (applied font of myCurrentText ≠ applied font of theStyle) then set theCharDifference to 1 
    The selected text give me:
           font "Minion Pro        Italic" of application "Adobe InDesign CS5.5"
    and the character style:
           "Minion Pro"
    I try "set theTextFont to font of applied font of myCurrentText" -> Error
    This is my script (it's too long to post here) <http://db.tt/BLoGPiN>.
    Loot at the "on CheckCharacterDifference(myCurrentText, theStyle)"
    TIA.
    Oli.

    I've written this, but I do not know if it covers all cases ...
    Someone?
    Thanks.
    Oli.
    set theText to item 1 of selection
    set theStyleChar to properties of character style 2
    -- analysis of the properties of the text
    set myTextFontApplied to applied font of theText
    set myTextFontFamily to font family of applied font of theText
    set myTextFontStyle to font style of theText
    -- analysis of the character style
    set myStyleCharFontStyle to applied font of theStyleChar
    if myStyleCharFontStyle = "" then
         set myStyleCharFontStyle to font style of theStyleChar
         if myStyleCharFontStyle ≠ myTextFontStyle then set theDifference to true
    else
         if myStyleCharFontStyle ≠ myTextFontFamily then set theDifference to true
    end if
    Message was edited by: OlivierBerquin

  • EhP5 Report: Actual/Actual Comparison Between Different Ledgers

    Dear all,
    Hoping that someone here has faced the same challenge and found a solution...
    My client wants to see a side-by-side comparison of the financial statements for several ledgers; ideally three, but two will do.
    It appears that EhP5 includes an enhancement of the standard actual/actual comparison report which allows a comparison between two ledgers. However, we are running EhP4, and an upgrade is unlikely to happen very soon. Do you know whether the report is available separately? Our search for a separate SAP note was unsuccessful.
    Our other alternative would be to develop a report ourselves, but if a standard solution is available, that would feel rather daft...
    Thanks in advance!

    Thanks for the advice - as the system would not let me create versions for these non-FISL ledgers, I assumed it was not possible to run the report for them at all.
    Unfortunately, I do not have the actual/actual comparison for two different years built in, nor the financial statement version, so we may still have to develop a new report (as per project standards, in BI rather than ERP)...
    Kind regards

  • Comparison between Oracle Contracts and Oracle Procurement Contracts?

    Hi All,
    I need some document which give the Comparison between Oracle Contracts and Oracle Procurement Contracts?
    And which of them are suitable for what type of contracts?
    Thanks
    Syed

    Hi,
    Any kind of help plz.
    Regards,
    Subhra

  • Comparison Between Oracle eBS and JD Edwards

    Hi All,
    Is there any site / document / any kind of referference / help on comparison between Oracle-eBS and JD Edwards mainly for Finance and SCM module please ? Need this urgently so any help is appreciated.
    Thanks & Regards,
    Subhra Saha

    Hi,
    Any kind of help plz.
    Regards,
    Subhra

  • Comparison between Purisma and JCAPS?

    I am researching several CDI (Customer Data Integration) solutions and I've narrowed this down to two solutions Purisma and JCAPS. I am mainly comparing the matching engines, record linkage efficiency and any machine learning capabilities.
    Has anyone done a "head-to-head" comparison between JCAPS and Purisma?
    Does anyone have any screenshots of the JCAPS record linkage tool for manual duplicate handling?
    My blog: http://mycodeblog.blogspot.com

    Why not write a test class? Shouldn't take long.

  • Comparison between Forms6i and Forms9i

    We have some client/server-based applications built in Forms6i and are considering to convert/rebuild them into Forms9i or JDeveloper as web-based applications. Has anyone done any comparison between Forms6i and Forms9i/JDeveloper? Or, can you point me to such documentation if existed?
    Thanks.

    For comparison between forms 6i and Oracle9i Forms check out the new features paper on:
    http://otn.oracle.com/products/forms
    Comparison to JDeveloper? How about the fact that you develop with Java language in JDeveloper and with PL/SQL in Forms.
    I would suggest that first you try to run your application on the Web using forms 6i. This should be a very simple test to do. See how you like it and only then ask yourself if you really need to go to JDeveloper.

  • Comparison between 3750 and 3750-metro

    hi folks,
    is there any links which will provide me on the comparison between 3750 and 3750-metro? for exapmple, isis is not support on 3750 but it support on 3750-metro. The product information from cisco site is insufficient in term of the main differences :p
    rgd
    josh.w

    Hi Josh,
    The Cisco Catalyst 3750 Metro Series is built for Metro Ethernet access in a customer location, enabling the delivery of more differentiated Metro Ethernet services. These switches feature bidirectional hierarchical QoS and Traffic Shaping, intelligent 802.1Q tunneling with class-of-service (CoS) mutation, VLAN translation, MPLS, EoMPLS, and Hierarchical Virtual Private LAN Service (H-VPLS) support, and redundant AC or DC power. They are ideal for service providers seeking to deliver profitable business services, such as Layer 2, Layer 3, and MPLS VPNs, in a variety of bandwidths and with different SLAs.
    The metro switches have the PXF chips (which allow hierarchical QoS on the 2 "WAN" GigE ports, so several logical links can share a connection, and have soft bandwidth limits).
    For more details on 3750-M switches have a look at this link
    http://www.cisco.com/en/US/products/hw/switches/ps5532/products_qanda_item09186a00801eb822.shtml
    HTH
    Ankur
    *Pls rate all helpfull post

  • Comparison between PeopleSoft and Fusion

    Hi ,
        I need to prepare a document to show up the comparison between PeopleSoft and Fusion. For eg: Business Unit in PeopleSoft and what is the concept in Fusion that is similar to Business Unit. Can anyone help me with a document that will give me detailed comparison between PeopleSoft and Fusion.
    Thanks,
    Fathima Farsatha

    I can't find any comparison on the internal database.  Can you add more about your goals with the question?  Are you stuck with a Business unit issue or functionality.  Since Fusion was built form the ground up it is a completely different software product.  If you have a very specific question then we might be able to collaborate with different groups and provide an answer or fix.

  • Comparison between OATS and QTP

    Hi,
    Does anyone have a kind of comparison between QTP and Oracle ATS ?
    Thanks

    Hi
    I don't think there is a paper that compares both tools, is there anything in particular that you would like to know?
    Regards
    Alex

  • Comparison between tools

    is there a report that make a comparison between oracle tool like 10g Forms, J2EE , WEB PL/SQL , J developer , HTMLDB ,APEX
    and how this tools is differ in application performance , easy of develepment , and others.
    regards

    is there a report that make a comparison between
    oracle tool like 10g Forms, J2EE , WEB PL/SQL , J
    developer , HTMLDB ,APEX
    and how this tools is differ in application
    performance , easy of develepment , and others.
    regardsBecause the tools are quite different and none of us will use them all (probably) the best way is reading (white) papers for all these products and drawing your own conclusions.
    Forms is migrating to webenabled (for deployment), J2EE and JDeveloper are java tools and web pl/sql and apex (formerly htmldb) are (basically) pl/sql tools.
    In this forum you can find some comments about scalabilty, (dis)advantages of apex/htmldb itself.
    Hope this helps.
    Leo

Maybe you are looking for