Comparison of different skin retouching plugins

Has anyone ever seen a review comparing the different retouching softwares, i.e., Imangenomic, Alien Skin Software or onOne? I'm about to buy one and don't know how to evaluate the differences. I have > 100 old photos to scan and then retouch. Thanks, Freddii

You could always buy Katrin Eismann's book and do it in Photoshop!
http://www.amazon.com/exec/obidos/ASIN/0321316274/ref=ase_thedesignpublish

Similar Messages

  • Problems with Skin Retouching Actions pack

    Hello everyone and sorry for my bad English. I need some help if possible: I bought and downloaded Skin Retouching Actions (I have C6S on Mac) but I can not install it in Photoshop with the Extensions Manager. 
    When I try to open the action pack I get this message "An unexpected error occurred while trying to verify this extension."
    I kindly ask if there is a way to install it manually? Or in another way...
    I hope to solve the problem. Any suggestion is welcome.Thanks!

    That is unusual Axel. I just tested it again to make sure it was working ok but I had no difficulties using that build of Extension Manager CS6 (see below).
    The only way to get hold of the actions would be to email the producer for them and they can send them to you. Their email address is: [email protected] Please let us know if you hold of them ok.

  • Help with overlaying a different "skin" on a hand

    Hi,
    I've seen images such as a camera body where a different "skin" was applied, such as snake skin but all the contours, shading etc of the camera were preserved.  What I would like to do is add a latex exam glove to a hand that is already in an image (doing a surgical procedure on a fish).  The image is for teaching purposes and the gloved hand is important.  Because of the nature of the procedure and limited access to the fish, it would be a lot of trouble to recreate the image.  Could someone please point me to a tutorial or instructions that would accomplish this?  I don't know how difficult it would be to make it look realistic.  I've used photoshop for a few years, but for basic post-proccesing of digital images, not artistic changes.
    Thanks for any help or suggestions.

    Image map is what you are looking for.

  • How to inactive different skin selection in personalization

    Hi,
    I customize the skin on the defalut skin base, I changed the logo and so on on the head area, because I don't want to change each skin for the logo and others, so is it possible to prevent user to choose different skins in the personalization function???
    Points rewarded if solution can provide!
    Regards,
    Holger

    Yes, it is very much possible.
    All the skin entries are maintained in the table CRMC_THTMLB_SKNE
    Goto SM30, and then the above table and delete the entries that you don't want any longer.
    The skins still exists in WAS, so when you want to re activate them, just add the skin to the above table back.
    Hope it helps.

  • Loading emoji since 10.10.3 very slow and no different skin tones

    Hi there,
    since I upgraded my MacBook Pro late 2013 to Yosemite 10.10.3 my keyboard lags, when I am trying to access the emojis.
    Before upgrading, everything worked fine.
    This happens for example when using iMessage or notes.
    It takes a few seconds, until the emojis are shown and I get a blank screen with the rainbow wheel:
    After the emojis are loaded it lags when I select a simple "smiley". Sometimes I have to select a smiley twice, before it appears in the application used. 
    Also I can't select the different skin tones as I am used to on iOS 8.3. I get the option to select between different "styles", but they all are the same:
    Does anybody else have also this issues and knows a solution? As I am using a lot iMessage on my Mac, it is very annoying.
    Thank you a lot!
    Kind regards!

    Hi all,
    I finally found the solution for the issue and wanted to share this with you guys.
    I had a very nice chat with Apple Care about this issue but unfortunately all tips like uninstalling third party apps or scanning for malware didn't help.
    Even deleting all the caches and check the rights or even the disk did not solve the problem.
    I also managed to install the combo update, which I did twice to get sure and also loaded installed the whole Yosemite image from the Appstore.
    Don't know why, but then I went into the "Font Book" in Safe Mode and didn't find anything strange. After booting the Mac in Normal Mode I also went into the "Font Book" there I found a lot of duplicate fonts. Don't know where they came from. And what did I find in there?
    After selecting "Resolve Automatically", all emoji went back to normal state as on my iPad and iPhone. You can also select one of the duplicate fonts and delete or rename the old version. In my case, I had a version from December 2013 and the new one from March 2015. For testing, I renamed the old version to "__Apple Color Emoji.ttf_", so that it doesn't appear in the "Font Book" anymore.
    Hope, this also helps you out!

  • Idoc data  comparison between different R/3 clients.

    Hi ppl ,
    Is there a way idoc comparison can be done between different clients without going
    by Segment by Segment comparison ?
    I have a requirement wherein i have thousands of idocs in QA system and i need to
    compare those with the ones in PROD system. The segments in the idocs may vary
    depending on the data that flows from the third party system which will post idocs in R/3.
    So, the segment wise comparison of data is also ruled out .
    Do we have any standard reports which will help in achieving this purpose ?
    Please let me know how the idoc data comparison can be carried out .
    Regards,
    Nick.

    Hi Nick,
    There is no standared tools available for comparing the data of two idocs.
    By using beyond compare s/w you can check the data, but the thing is you have to download the idoc data to file format.
    By using Idoc_xml_transform function module you can download idoc data to xml format, after you can compare.
    Check this
    http://download.cnet.com/Beyond-Compare/3000-2242_4-10015731.html
    Regards
    Ramesh

  • EhP5 Report: Actual/Actual Comparison Between Different Ledgers

    Dear all,
    Hoping that someone here has faced the same challenge and found a solution...
    My client wants to see a side-by-side comparison of the financial statements for several ledgers; ideally three, but two will do.
    It appears that EhP5 includes an enhancement of the standard actual/actual comparison report which allows a comparison between two ledgers. However, we are running EhP4, and an upgrade is unlikely to happen very soon. Do you know whether the report is available separately? Our search for a separate SAP note was unsuccessful.
    Our other alternative would be to develop a report ourselves, but if a standard solution is available, that would feel rather daft...
    Thanks in advance!

    Thanks for the advice - as the system would not let me create versions for these non-FISL ledgers, I assumed it was not possible to run the report for them at all.
    Unfortunately, I do not have the actual/actual comparison for two different years built in, nor the financial statement version, so we may still have to develop a new report (as per project standards, in BI rather than ERP)...
    Kind regards

  • Date comparison behaves differently in deployment

    Hi All
    I needed to compare dates entered by the user when selected thru an lov or inputed. So I went about converting the string dates in its screen related format(dd/MM/yyyy) to comparable oracl date format(yyyy-MM-dd). I'm not sure why I went for yyyy-MM-dd, but thats how I guess it expected it when comparing.
    - The lov provides the items in String format
    - I convert string date to oracle.jbo.domain.date with the required format
    - and then do the comparison
    Now the problem I'm having is the comparison works fine in IWLS, but it does not compare when I deploy the app.
    The IWLS is 11.1.1.3 and the deployment server is 11.1.1.6.
    Also the IWLS is in a windows box and the server is in linux.
    I'm not sure that the server or OS would be an issue which I suspect it wouldnt be.
    The reason I pointed out the OS and server versions is because the logs that I print out shows different date formats when run in both servers.
    for instance, in IWLS/Win, my log shows
    rowDateSTRING= 01/09/2012, convertedRowDateDATE=Sat Sep 01 00:00:00 GMT 2012, finalEndDateDATE=2012-09-01
    in my deployed app on WLS/linx 11.1.1.6 it shows
    rowDateSTRING= 01/09/2012, convertedRowDateDATE=Sat Sep 01 00:00:00 WST 2012, finalEndDateDATE=2012-09-01
    Notice the WST vs GMT.

    Also the date forma displayed on the screen is different to that when I entered it.
    I entered in dd/MM/yyyy format and on reslecting the row in the view page the entered row is displayed as mm/dd/yyyy.
    But in IWLS, its the same when I enter and when I view
    Edited by: bigchill on 26/02/2013 19:46

  • OSS Notes Comparison among different systems

    Hi
    How do we check if a particular OSS note is implemented in Dev , Test and also Production System.
    Normally we do a version comaprion .
    I would like to know do we follow the same approach for checking if code changes is made effective in different
    systems . I dont have authorization with SNOTE transaction .
    So is there any approach for the same.
    Appreciate the inputs
    K.Nadesh Kumar

    Hi Raj
    Thanks for the valid inputs .
    When i ran the report SCWN_NOTE_BROWSER it has asked for some selection screen parameters .
    So if i am correct
    in the Selection Screen i muct give the follwoing parameters
    SAP Note Number
    and also
    Implemented status - Completely Implemented
    and Sort order as Number (radio button)..
    Or in the other method you had suggested i can do a version management if that is the case do we take the main
    program for which the SAP OSS note might be implemeted and do a code comparison
    I have previously done only code comparion for the program through SE38
    K.Nadesh Kumar

  • Comparison among different PDF libraries

    Hi,
    Can anyone tell me about the his or her experience with the various PDF libraries like PDFLib, Preptool and Adobe Librarty??I am seriously confused about choosing the best possible option but havnt been able to find any comparisons so far.. Mainly I want the results for functionalities like editable PDF generation, stamping (digital signatures), merging PDF files and TIFF 2 PDF conversion.. Kindly help me in this regard..
    Deepak

    XSL-FO always an option. FOP isn't great though, but it works. Other XSL-FO engines are out there.
    You can build XDP (XML) programmatically and send it through LiveCycle. That way you can use any xml editor to create and modify pdfs just like you would with XSL-FO. This is what all the kids are doing these days. Of course you have to pay through the nose for LiveCycle Servers. LiveCycle Designer comes with Acrobat I believe. But you have to buy Acrobat.
    Either way Adobe has you by the chotchkies.

  • CS3/CS4 - Persistent data and different versions of plugin

    Hi there,
    In my plugin I have persistent data on e.g., the document and page items.
    Say that I'm in version 1.0 of my plugin has a single persistent data field on the document, and that is wish to add a second field for version 1.1.
    Does the SDK contain some form of functionallity for merging an old document into a new one that conform with the new fields?
    Basically, my problem is that I do not know if I'm allowed to read the new persistent field in my ReadWrite function, since the current document could be created using version 1.0.
    I guess that one solution is to tag the document with a version, and use that to determine the functionality of the ReadWrite function? However that do not seem as the most elegant solution...
    I hope somebody understands my problem, and has a more sophisticated solution
    Thanks
    Kind regards Toke

    There are basically two ways to deal with this situation.
    The first is to let InDesign treat your data as a blob, include your own version number in the blob and parse the blob yourself based on the version number.  In this scenario you generally keep your plug-in's version resources the same, so InDesign doesn't know you've changed data formats.
    The second is the InDesign way, in that you define a schema resource for each format version of your plug-in.  Doing this places constraints on your data, in that changes have to be moderately simple so that InDesign can apply changes to the older versions of your data to bring them up to the current schema.
    See Schema.fh in the SDK.
    The sample /Adobe_InDesign_CS4_Products_SDK/source/sdksamples/framelabel/FrmLbl.fr also uses schema resources.
    The key is to be careful about syncing changes in your data with changes to your plug-in's format version numbers, as well as keeping your data simple enough for the schema system to update it.  If you don't, then you need to get into schema updating code and a bunch more work.
    Jon

  • Can you get Netscape launch with different default JRE Plugin versions?

    Does anyone know how to do this?
    OS: WinNT4
    Browser: Netscape 6
    Situation:
    We want to standardize on JRE 1.4.1 but some of our clients web applications use JRE 1.3.1 and they won't run with the newer VM. So I need to launch Netscape with default plugin as 1.3.1 for some apps and default plugin as 1.4.1 for others.
    Ideally, I would like to run a client logon script that makes a registry change to set the default JRE plugin to either 1.3.1 or 1.4.1 BEFORE Netscape launches and goes to our client URL.
    Does anyone know which reg keys does this? Is there a better way?
    Thanks.

    You can specify the JRE through the MIME type:
    http://devedge.netscape.com/viewsource/2002/markup-and-plugins/
    "You can invoke the Java plugin for Netscape 7 and other Mozilla-based browsers by using the appropriate Java MIME type. Here is an example:
    <object type="application/x-java-applet;jpi-version=1.4.1_01"
    width="460" height="160">
    The above code mentions a version specific MIME type, and if the Mozilla-based browser such as Netscape 7 doesn't have JRE 1.4.1_01 installed, the alternate text is displayed."
    Maybe that's something that you can use here.

  • Object Comparison between different systems

    Hi to all,
    any of you have made a program to compare object/object versions between diferent systems (with RFCs).
    Can you tell me wich Function Models and tableshave you used.
    I found a very usefull Function Model SVRS_GET_VERSION_DIRECTORY_46 very usefull for my purpose but i depared myself with a strange problem. The table VRSD used in this FM have all the Objects in the System but when i tried to transport a request between 2 diferent Systems no new entry was added to VRSD in the target system so SVRS_GET_VERSION_DIRECTORY_46 is no usefull.
    Any one knows if there is any customizing relative to this table or any process to catch this transported objects in the target System?
    There is one entry in E070 but here thre is no reference for Object versions.
    Many thanks and any help will be very Helpfull.
    Thanks In advance
    PPaiva

    Hi Pedro,
               Can you let me know which object you are comparing? Were you not able to do remote comparision for that object?

  • How do you get the same skin wrinkles to match all the different Ethnicity?

    Hello! this is my first time posting a question in this forum, hopefully there will be some clever people out there who can help me!
    I have a wrinkled eye texture (see below)
    How do I digitally manipulate it so that i can use this same texture to on top of other photos so that it fits/blends well with people of different ethnic origins?
    my aim is to make poeple looking older using the same texture.
    So far I've tried:
    - Making the texture black and white and use different filters, but it doesnt work on all the different skin colours and it doesnt look real.
    - Using Multiply filter after adjusting the original texture - that seems to work well except on people with darker skin, then the wrinkles are just too dark.
    I would like to know if anyone knows a simple way where i can make this texture works on all skin colours, with out going in and adjusting the wrinkle texture one by one according to each individual.
    hope my question isnt too confusing. any suggestions will be greatly appriciated!!

    Here is the texture I've been manipulating  all afternoon to try and achieve the looks i want.
    and when I put this texture over the top of other images and select Multiply, and adjusted the opacity, this is what i get....
    Now this kinda works?? but it still looks not as good on an asian person.
    Thanks by the way to everyone for all the tips, I really really appriciate it   and more suggestions for improvments are welcome!

  • Different versions Plugin and ActiveX with MSI file installation

    Dear all,
    we used the newest Adobe Flash Player MSI file with our software deployment tool. But we has trouble with two different versions of plugin and ActiveX installation.
    Does any body know how that could be appear? Should we use now the .EXE file?
    Best regards,
    Marco Schmitt
    Freudenberg IT

    The EXE and MSI installers on the distribution page are always identical versions.
    However, it seems to happen a lot that MSI installers are cached on some corporate servers.  Make sure the caches are cleaned, or download the MSI from outside your corporate environment.

Maybe you are looking for