Comparison of Fax features for EBS configuration

H All,
Could anyone please let me know where could find a document related to different Fax features with comparison for EBS configuration.
We need to find out which fax will be better to be integarted with EBS 12.0.6 to work.
Thanks for your time!
Regards,

Please see old threads for similar discussion -- http://forums.oracle.com/forums/search.jspa?threadID=&q=Fax&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
I do not think you will find a document with a comparison, and I believe the best practice is to contact the vendors and get all those details.
Thanks,
Hussein

Similar Messages

Oracle RAC new feature for interconnect configuration HAIP vs BONDING

Hi All:
I would like to get some opinion about using Oracle HAIP (High Avalibilty IP) for configuring the RAC interconnect vs using network interface bonding.
This seems to be a new feature for Oracle GI from 11.2.0.2 and later. Have anyone had any experience for using HAIP and any issues?
Thanks

Hi
Multiple private network adapters can be defined either during the installation phase or afterward using the oifcfg.Grid Infrastructure can activate a maximum of four private network adapters at a time. With HAIP, by default, interconnect traffic will be load balanced across all active interconnect interfaces, and corresponding HAIP address will be failed over transparently to other adapters if one fails or becomes non-communicative.
it is quite helpful in following scenarios
1) if one private network adapterrs fails, virtual private IP on that adapter would be relocated to healthy adapter.
There is very good document on Metalink ( Doc ID - 1210883.1)
Rgds
Harvinder

I have a new iMac and want to use my HP 7300 All in One and to use the "Fax"feature I need a phone port on computer and of course, this computer does not have one. Are there any aftermarket devices for USB to phone that would work in this case?

I have a new iMac and want to use my HP 7300 "All in One and cannot use the fax feature because there is no phone port is there a solution for this?BACellli

You don't need a phone port on the iMac. The HP 7300 DeskJet Pro has an internal modem, you connect the printer's modem connection directly to your phone line. Please re-read the install directions that came with the printer.

Configuring Global Currencies in BI Apps 7.9.6 for EBS 11.5.10 Source

Hi All,
After reviewing the Configuring Common Areas and Dimensions section of the Oracle BI Applications document [Oracle Business Intelligence Applications Configuration Guide for Informatica PowerCenter Users Version 7.9.6 E14216-01|http://download.oracle.com/docs/cd/E14223_01/bia.796/e14216.pdf] I have a question regarding section +3.1.2 How to Configure Global Currencies+.
Background
OLTP Source: Oracle E-Business Suite 11.5.10
OBI Apps: Financial Analytics 7.9.6
We have 49 enabled Currencies and multiple Sets of Books (SOBs) each with a different Functional Currency and I am concerned with the limitations of the Global Currencies configuration within OBI Apps. From the documentation it states that:
Global currencies. Oracle BI Applications provides three global currencies, which are the common currencies used by the Oracle Business Analytics Warehouse. I'm keen to know if the 3 standard Global Currencies can be extended by adding further custom parameters in the Source System Parameters e.g. $$GLOBAL4_CURR_CODE, $$GLOBAL5_CURR_CODE, etc. and corresponding Exchange Rate parameters $$GLOBAL4_RATE_TYPE, etc.
From the documentation definition of Document, Local and Global currencies, the following configuration for the Global currencies does not make much sense:
$$GLOBAL1_CURR_CODE (for the document currency).
$$GLOBAL2_CURR_CODE (for the local currency).
$$GLOBAL3_CURR_CODE (for the global currency).Presumably these should be the 3 standard Global Currency definitions. If so, I want to confirm that the Document and Local currencies get picked up automatically depending on your EBS configuration?
Thanks for your time, all input greatly appreciated... and points duly awarded :-)
Have a great day.
Kind Regards,
Gary.

Hi,
The 3 Global currency codes are different from functional , local currency.
All the transactions are brought into the warehouse and there is no limitation to the number of currencies that can be brought in but for reporting purpose you want to convert all these transactions in multiple currencies to a single currency ...lets say US$ and at a monthly rate or GBP at a spot rate etc..
So in a nutshell the document and local currenclies do come in and there is no configuration needed but translation to a global reporting currency and the rates at which its converted is determined by what you provide in DAC.. the conversion is done by mplt_currency_conversion which is present in each and every fact mapping.

EBS configuration for UK

Hi all
Good Morning. Can anybody help me out in configuring EBS for UK requirement. I will be grateful if you could send config guide on the same.
Regards
Brahmam

The EBS configuration is same for all countries you would need to know the format in which you would receive the file from the bank if its csv or pdf u need to make a conversion program. Get the BAI codes from the bank and configure the algorithm accordingly. Tcode OT83

Need Help on configuring VM for EBS

Hi,
We have requirement to install EBS on VMware on Windows servers(32GB RAM and 3TB of disk space) for internal traning purpose,but VM is not supporting more than 3.5 GB, but for EBS installation and user activity base it requires more than 10g of memory for single instance, can you any one guide me which is best option to install.
Thanks

How does Websense expect your source IPs in the tunnel? 192.168.8.0 0.0.3.255 or PAT'ed 216.222.208.101 ?
Check
show crypto isakmp sa
show crypto ipsec sa
show crypto session
You'd better remove the preshared key from your post.

No Drag-n-Drop feature for my mounted Adobe Drive in my Adobe Bridge CC

I've developed a custom Drive Connector for our storage server. In Adobe Bridge CC, after connecting and auto-mounting to our server through Adobe Drive 5, there is no Drag-n-Drop feature for my data inside the mounted drive. But, if I browse other directories of my Mac with Bridge, all files are draggable. What could be the problem?
It's quite strange! Because, files within my mounted drive are draggable through Adobe Bridge CS6, but not in Adobe Bridge CC !!!
My configuration:
Mac OSX 10.9.2
Adobe Bridge CC 6.0.1.6
Adobe Drive 5.0.2.16
Our own custom Drive connector

I too have discovered the lack of Drag-n-Drop support in Bridge when browsing assets provided by my Adobe Drive connector. I have tried telling Drive that I support nearly all of the Drive features by adding "Capability" objects to the ConnectHandler's response object (including Capability.COPY and Capability.MOVE), but that had no effect; Bridge still refuses to let me drag an asset provided by the connector.
I would very much like to know what I have to do in order to provided Drag-n-Drop functionality.

I need a table of the different features for Adobe Standard 9, 10 and 11?

I need a table of the different features for Adobe Standard 9, 10 and 11 so that can advise my client which version can be packaed and deployed via SCCM. A detailed list of features for each version would be most useful.
Regards Paul Jenkins

See the following documents:
Acrobat Standard 9, X and XI : http://www.adobe.com/products/acrobatstandard/buying-guide-version-comparison.html
Acrobat Pro 9, X and XI : http://www.adobe.com/products/acrobatpro/buying-guide-version-comparison.html
Back to version 7 : http://prodesigntools.com/version-comparison-differences-between-adobe-acrobat-x-10-9-8-7. html

New feature for Preview - Where to submit?

I have a thought for a new feature for Preview that I wonder how many people would say it is worth submitting to Apple, and if so, then where and how do I send it to them?
The problem I face is that I get a lot of PDF forms off websites (usually financially related) that are not created with proper form fields, so I am forced to print the form off and use my "chicken scribble" handwriting to fill it in, then I usually try to email it back, but sometimes I have to fax or mail it.
Well, the thought I had was, "Why can't I use Preview to select a font, click on the page with the Text tool and start typing in what I need?"
Ideally it would be good to be able to save the document with your "overtyping", but I understand that some PDF files are protected, so how about saving just the stuff I have added as to a PDF file that when I open that, it opens the original (blank) form as well?
Surely I'm not the only one that has to fill in PDF forms. Anyone else think this is a worthy addition to Previews already good capabilities?
If so, how do I pass this idea onto someone that cares?
Cheers,
Mark

Welcome to the Forums!
It is a good suggestion. FYI, Acrobat Professional can do this (not the free reader, of course).
Thanks also for understanding that this is not the place for suggestions to Apple!
There's no specific feedback page for Preview, so you should submit to the general OS X feedback page.
Links to other feedback pages (for your future ideas) are here.
Hope this helps...

How to enable Portfolio Analysis Feature for Project Server 2010?

Hi,
We have a Project Server 2010 instance. We now want to Use the Portfolio Analysis on our server. How can we enable the feature on our existing environment without disturbing any current feature that we have ?
If someone can provide with the detailed steps for the configuration process that will be helpful.
Thanks

Hi ,
The portfolio feature is part of the out of the boxProject Server 2010 solution. Maybe you just have to unhide the links in the quick launch menu. It will not disturb any of your current configuration.
Please find here a couple of links:
https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=12&checkda=1&ct=1397216770&rver=6.0.5276.0&wp=MCLBI&wlcxt=technet%24technet%24technet&wreply=http%3a%2f%2ftechnet.microsoft.com%2fen-us%2flibrary%2fgg715564%2528v%3doffice.14%2529.aspx&lc=1033&id=254354&mkt=en-US
http://azlav.umtblog.com/2012/04/10/resource-plans-and-portfolio-analysis/
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Is there any limitation of firmware or hardware for QoS configuration (4400 controller & 1252 AP's)

Hi Experts,
Before proceeding for adding AP model 1131 and 1252 into my set-up , I need to know whether any limitation of firmware or hardware for QoS configuration in wireless set-up .
I have 4400 controller and 1130 & 1250 AP models.

Hi Vinod,
Since you have 4400 controllers, you can run upto WLC 7.0.x code. Refer this for more detail
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
there is no specific limitation to 1131/1252 AP model as such, everything is WLC software dependent.
From later software 7.4.x,7.6.x,8.x, lots of improvement for QoS configuration & bandwidth control, but since your controller is old hardware, you cannot have those latest features.
here is a reference post on how QoS works in wireless environment
http://mrncciew.com/2012/11/28/understanding-wireless-qos-part-1/
HTH
Rasika
*** Pls rate all useful responses ****

10gR2 Transportable Tablespaces Certified for EBS 11i for Migration

Guys,
Good news is Now 10gR2 Transportable Tablespaces Certified for EBS 11i,
Here is Steven chan blog link, I know personally how much i struggled with expdp and impdp on linux, it sounds good news who is migrating 11i .
http://blogs.oracle.com/stevenChan/2010/04/10gr2_xtts_ebs11i.html?utm_source=feedburner&utm_medium=email&utm_campaign=Feed%3A+OracleE-BusinessSuiteTechnology+%28Oracle+E-Business+Suite+Technology%29

To migrate the database you can either use Transportable tablespaces or export/import.
Transportable Tablespaces
New Source Database Added for EBS 12 + 11gR2 Transportable Tablespaces
https://blogs.oracle.com/stevenChan/entry/new_source_database_added_for
New Source Databases Added for Transportable Tablespaces + EBS 11i
https://blogs.oracle.com/stevenChan/entry/new_source_databases_added_for
Database Migration using 11gR2 Transportable Tablespaces Now Certified for EBS 12
https://blogs.oracle.com/stevenChan/entry/database_migration_using_11gr2_transportable
Export/Import
Export/import process for 12.0 or 12.1 using 11gR1 or 11gR2 (Doc ID 741818.1)
Export/import notes on Applications 11i Database 11g (Doc ID 557738.1)
If your application will remain on the same OS (which is different than the target database OS) then please also see:
Oracle EBS R12 with Database Tier Only Platform on Oracle Database 11.2.0 (Doc ID 456347.1)
Using Oracle EBS with a Split Configuration Database Tier on 11gR2 (Doc ID 946413.1)
Oracle E-Business Suite Upgrades and Platform Migration (Doc ID 1377213.1)
Thanks,
Hussein

Best practice for EBS Testing

Hello Friends - We are doing EBS Configuration and it includes Search strings also. These changes are applicable to around 40-50 Bank accounts.
Is it that I should ask Bank to send us test Bank statements for all these accounts.
Can you pls share Best practices to test EBS set up.
Thanks

Hello!
You don't have to test EBS for each bank account. The best approach to testing is to identify the typical bank statement cases and test them. For instance, if you have bank statements from five banks with several bank accounts in each bank, you need to test the one bank statement for one bank account from each bank. Similarly, if you have different types of bank accounts (e.g. current account, deposit account, transfer account etc.), you will have different operation types in bank statements for these accounts. Therefore, you also have to test bank statement from different account types.
To sum up, test typical bank statements from each bank and different bank statements from each account type if applicable.
Hope this will help you!
Best regards!

Backup strategy for ebs R12?

Hi,
I have a couple of questions regarding to backup strategy for ebs R12.
Let's say that we have one application server and one database server running, and we would like to have a backup periodically for both servers.
This means that we want to have the exactly same backup of configurations and other files for the application server and the database server in case of any fatal crashes in the servers.
I went through some discussion threads and it seems common way is to use RMAN for the data of database and file system copy for application and database servers. But, I would like to know what's the best way or recommended way for the backup strategy for data and server files of Oracle e-business suite.
Do you guys have any suggestion for this?
Thanks in advance.
Cheers,
SH

Hi SH;
I suggest check first our previous discussion
backup and recovery startegy for EBS
Re: Backup System
Backup Policy for EBS can
If you make search you can find many other thread which is mention same question
For your issue basicly what we do
1. For our prod db, if possible we take weekly cold backup(sunday) and take rman backup also daily(full backup, but it depends system you can prefer to take incremental)
2. For our system we take file system backup weekly(OS base)
3. For application we take backup every sunday(for some system 15 days or 30 days period). The most important point here if your system prod, and if you need to apply patch to your system you need to have valid backup and also need backup for after patching
One other important issue is we run preclone sh before take backup for apps and db tier
Regard
Helios

Cancelling of Long Running Queries feature for GRID data block

Hi,
Maybe someone knows solution-
we have custom form with Spreadtable (JTF_GRID object) block (similar as, for example, EBS form WMSCTLBD).
Is here any possibility to enable ‘Cancel Long Running Queries’ feature for it?
I have reviewed built-in JTF_GRID library (with hope to implement it by adding some custom timer) but I cannot find any API which could be used for cancelling already submitted queries.
I have created a SR but analyst suggested to ask for it in forums :)
Our Oracle Forms Version is 6.0.8.28.0
Thanks in advance.
BR,
Kristaps

Try CTRL-ALT-DELETE
:-)

Comparison of Fax features for EBS configuration

Similar Messages

Maybe you are looking for