Comparison of the Different Groupware Integration Technologies - Server-Based Groupware Integration - SAP Library

To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.

Hi Hannes,
thank you for your reply.
You mean the transaction SMICM, or? Yes, I checked the https configuration, but I didn't change anything.
The documentation said that following things should be checked:
-Misc section: In our case it was correct (it the name of the application server)
-Services: that' our settings:
icm/server_port_0     = PROT=HTTP,PORT=8000,TIMEOUT=900
icm/server_port_1     = PROT=SMTP,PORT=0
icm/server_port_2     = PROT=HTTPS,PORT=443,TIMEOUT=900
I didn't change there anything.
I can tell you what I have done until now:
1) note: I implemented the note which you said and all which depend on 1443469 the note (1417047, 1422365, 1423114, 1437152, 1446757, 446757).
Now we have the synchronization version 8.024.
2) Our software team checked the latest patches of MS Outlook
3) I created two sites: MS-Exchange Server & SBDocs Groupeware Customizing in Tx smoeac
4) I created a new Client GWI profile and activated this profile.
Best regards, Jasmin

Similar Messages

Outlook integration backend server based outlook integration

Hello ,
we are usering CRM 7.0 with backend server based outlook integration. We are using the 'Customer and Contact ' subscription.
The business partner is not assigned to the zip code subscribed , but when the user is main person responsible on an activity the activity is distributed. WHY ? What table is used ? Why only the main person responsible and not all person responsible ?
Has anyone a more detailed debugging docu for this area ?
thanks
Juergen Ritz

Kiran,
The answer to your question, is you need to follow the groupware integration guides for CRM 40 as the instructions are the same. The only thing that changes is the mapbox is now an ABAP program, so you can ignore the mapbox configuration steps in those documents(but still excute the customizing downloads).
Look at OSS Note 1156271 for more details. I just finished up doing groupware integration with Notes, but the general steps are the same, minus the notes/exchange specific steps which are detailed in the standard documentation.
Take care,
Stephen

Any Overview Doc about the different CRM UI Technologies out there?

Hi,
I am looking for a document which gives an overview about the different UI technologies of SAP CRM5.0 and compares them (like PC UI, html GUI, IC WebClient, Mobile Sales) with pros and cons. When to use what, etc.
If there is anything like that out there, replying with a link or an answer to [email protected] will be appreciated.
Thanks and regards,
-tom

Hi Sireesha,
There are diff types of UI technologies like: DynPro, Web DynPro, BSP,
, PC UI, IC WebClient, Mobile Sales etc.
Pls go through the followings, these are very helpful:
http://help.sap.com/saphelp_crm50/helpdata/en/42/645b4b8cd83f55e10000000a114cbd/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/e7/c7af3fda5a3c17e10000000a114084/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm
Thanks and Regards,
Atin

Using SQL stored procedures How to get the list of .rar files from e:\Tempbackup directories from the different remote desktop windows server and delete the .rar files which contains the current month and date

Concept:
Every month i need to find the list of .rar files from the
E:/TempBackup directory from the different environments (remote desktop servers) and i need to delete the current month
.rar files alone from the respective (E:/TempBackup) directory. below is example files structure inside the
E:/TempBackup.
example:
zDROP_2014_08_31_Backups.rar
zDROP_2014_09_31_Backups.rar
zDROP_2014_10_31_Backups.rar
from the above list i need to delete the zDROP_2014_08_31_Backups.rar(current month) file alone and also logs should be capture for this deletion.
key words for this are zDROP and Current month and date.
i need a stored procedure for this concept. could you please help on this.

Hello,
You can schedule an operating system task (Control Panel -> Schedule task) to either call a batch file or a PowerShell script.
Please read the following resources for examples:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/61373719-fffb-4d94-bdbe-7d8ed8620b44/delete-filesfolders-on-remote-servers-using-powershell?forum=winserverpowershell
http://www.networknet.nl/apps/wp/archives/943
http://jeffwouters.nl/index.php/2011/10/powershell-script-to-delete-files-older-that-a-week/
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Server Based GroupWare Intergration

Hi Gurus,
Can any one please let me know the settings which needs to be for Server Based Group ware setings which needs to be done for Outlook integration.
Thanks in advance,
Regards
Vinod

Hello Vinod,
You can get information about server level integration:
http://help.sap.com/saphelp_crm70/helpdata/EN/47/042469f10c2ecbe10000000a11466f/frameset.htm
Also in configuration:
SPRO->CRM->CRM Middleware and Related Components->Groupware Integration
Please read the each activity description under Groupware Integration node.
Best regards,
Koshal

What are the different tools(software) we used in support projects and avi

hi,
What are the different tools(software) we used in support projects(sap) and aviailable in market??/
Thanks,
bajee

Hey Bajee,
I believe you are talking about Ticketing tool used for AMS ( Application Management Support )....
There are several tools available for this by several vendors....
They are Magic Service desk, HP open view, BMC remedy, Peregrine help desk, SAP Solution Manager can also be used as support desk tool...
I hope that what you asked for and if its not then please clarify your questions !!
Inspire ppl by rewarding !!
Regards,
Anand

Pdf's freeze using Reader in server based Mac 10.6 or 10.5

I support several hundred iMac's for a school district. We have a site license for Adobe CS4 (and CS3). The user's accounts are server based. The programs are installed on the local computer. If I create a local account and log into that local account all functions normally. However, if I or anyone else for that matter logs in using the server based account, pdf's freeze. Also, when logged into the server, if you try to install a new version of Reader it errors looking for a disk. What the program is really looking for is the users' local account which of course doesn't exist locally because I am logged into the server. I've had Apple out to look at the server and local iMacs. They say all is functioning normally and this is a known Adobe problem. Apparently the program can't find the users account on the server. I have used a workaround with Preview and Word but that's not a solution. Any ideas?

Thanks for the thought, Barbara B. Not sure if this counts, but emailed the file to myself [different email account, same computer] but it would not play as an email attachment. Any suggestions for a web upload where I can test your suggestion? Seems like there should be a different save option other than IMAGES ONLY but that is the only option I'm given.

SSIS 2012 Error - The SQL Server specified in Integration Services service configuration is not present or is not available..

hi Guys,
working on below error if anyone has work around.
It is on SQL Server 2012 cluster.
The SQL Server specified in Integration Services service configuration is not present or is not available. This might occur when there is no default instance of SQL Server on the computer. For more information, see the topic "Configuring
the Integration Services Service" in SQL Server 2012 Books Online.
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

Hi Logicinisde,
This issue might be caused that we install named instance on the machine, or the default instance listening a different port rather than the default one.
To solve this issue, please refer to the following article for detail information:
http://blog.sql-assistance.com/index.php/there-is-no-default-instance
Regards,
Elvis Long
TechNet Community Support

What is the different between Sharepoint fast search service and Sql server fulltext search?

HI ,
I want to kow what is the different between Sharepoint fast search service and Sql server fulltext search?
Or Can I abstract the Sharepoint fast search from the Sharepoint platform as a isolate component?
Thank you.
James

They are very, very different beasts.
Firstly FAST Search for SharePoint is the old name for the product and is only relevant for SharePoint 2010 not 2013. It got merged into the standard SharePoint search for the 2013 release.
SharePoint search is aimed at providing a Bing or Google like experience for your intranet content, as well as providing some nifty features that are purely SharePoint releated along the way. That means it can crawl SharePoint content, file shares,
outlook mailboxes, internal and external websites and probably fifty other different things if you really tried. Whilst i'm not an expert on SQL full text search I believe it's intended to provide a search feature for content held within SQL databases
and tables.
Can you run SharePoint purely for Search? Yes, definitely.

Integrating Exchange Server in the cloud with Project / Sharepoint Server internal

Hi,
I wonder how do I integrate service Exchange Server with Project Server 2010.
I have a Project Server 2010 you need to send emails with project updates and other integrations with Outlook.O standard procedure is to perform procedures (run commands in Exchange Server Shell) and create users in Project Server.
But I have a situation where my client uses a service exchange in the cloud and not a server for internal mail.
How do I integrate Project Server with Exchange this scenario where the mail server is an external service (cloud)?
I made the settings as the procedure () but got no success, no mail was received to be alert or reminder:
Below are the screens with the settings that were made.
Crawl Resource Configuration (http://technet.microsoft.com/pt-br/library/ee806927(v=office.14).aspx)
1) I Installed SMTP service on my server.
2) I made the configuations above
3) I configured the outgoing/Ingoing Setting in Sharepoint Central Administration

Hi Marcelo,
Without providing the extended rights to project user, I dont think you will be able to successfully integrate project server with exchange cloud. Here is the technet article about how to integrate it with extended rights which needs running commands running
on exchange server:
http://technet.microsoft.com/en-in/library/ff468700%28v=office.14%29.aspx
Vikram Daruru - MSFT

How to use the integrated ITS server in WAS6.40 for WEBGUI

Hi,
I am testing the Portal 6.0SP6 on WAS6.40SP7.
Using User Mapping, I am able to connect and call some transaction to R/3 System (4.6c) and the ITS servers for the R/3 system. If I am going to use webgui to call a transaction, do I need the ITS server at all? The reason I asked because I thought WAS6.40 came with an embedded ITS server.
If I can make use of the integrated ITS server, how do I configure the system connection?
Thanks,
Edmond wong

I have read the past posts, but I am still not clear... We are implementing mySAP ERP 2004. This will include ECC 5.0 and EP 6.2.
We currently have R/3 4.6C and EP5.5. From EP 5.5 I have users executing R/3 transactions directly from EP using the standard Master iView. This traffic goes via the ITS virtual instance for the R/3 system.
I am trying to decide if I need to setup a separate ITS to continue to do what we do now OR if the direct call of a transaction from EP6.2 using the SAP supplied Master iView can be accomplished using the Internal ITS on ECC 5.0. We do not have the DEV systems set up so I cannot test.
Any comments?
Thanks,
Rich

What are the different ways in accessing the SQL server from NWDS ?

Hi Experts,
Can anyone suggest the different ways for accessing the SQL server from NWDS.I also want to know whether any tool is available for accessing SQL server from Webdynpro java application in Netweaver development studio.
I am currently using JDBC driver for accessing the SQL server from Webdynpro java application in NWDS.
Regards,
Krishna Balaji T

Note - that no internet backup service has been proven to be safe and effective for backing up the iPhoto library - unless you personally have backup uyp an iPhoto library and restored it sucussfuly form one it should not be recommended - a large number of people have lost their photos trying it
LN

Deploy the JSF app to integrated Weblogic Server Error

Hi, All,
I just created a new ADF app and have only one single JSF page in which have one Calender component. After right click the ViewController project and select deploy to Integrated Weblogic server and i got the below error:
[01:05:25 AM] ---- Deployment started. ----
[01:05:25 AM] Target platform is (Weblogic 10.3).
[01:05:26 AM] #### Deployment incomplete. ####
[01:05:26 AM] [J2EE Deployment SPI:260010]Unable to connect to 't3://127.0.0.1:7101' as user, 'weblogic'. Error received: null
[01:05:26 AM] [J2EE Deployment SPI:260010]Unable to connect to 't3://127.0.0.1:7101' as user, 'weblogic'. Error received: null
[01:05:26 AM] [J2EE Deployment SPI:260010]Unable to connect to 't3://127.0.0.1:7101' as user, 'weblogic'. Error received: null
[01:05:26 AM] t3://127.0.0.1:7101: Destination unreachable; nested exception is:
java.net.ProtocolException: unrecognized response from proxy: 'HTTP/1.1 500 Server Error'; No available router to destination
[01:05:26 AM] Destination unreachable; nested exception is:
java.net.ProtocolException: unrecognized response from proxy: 'HTTP/1.1 500 Server Error'; No available router to destination
If right click the simple JSF page and run directly will start the wl server and seems not to deploy the demo app. the log as below:
Starting WLS with line:
C:\PROGRA~1\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\PROGRA~1\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy "-Djavax.net.ssl.trustStore=C:\Program Files\Oracle\Middle Ware\wlserver_10.3\server\lib\DemoTrust.jks" -Dhttp.proxyHost=www-proxy.cn.oracle.com -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts= -Dhttps.proxyHost=www-proxy.cn.oracle.com -Dhttps.proxyPort=80 -Dhttps.nonProxyHosts= -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\PROGRA~1\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\PROGRA~1\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\PROGRA~1\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\DOCUME~1\gerry\APPLIC~1\JDEVEL~1\SYSTEM~1.60\DEFAUL~1 -Dcommon.components.home=C:\PROGRA~1\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\PROGRA~1\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\DOCUME~1\gerry\APPLIC~1\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\DOCUME~1\gerry\APPLIC~1\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\DOCUME~1\gerry\APPLIC~1\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\DOCUME~1\gerry\APPLIC~1\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\gerry\APPLIC~1\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\PROGRA~1\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\PROGRA~1\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\gerry\APPLIC~1\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\PROGRA~1\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\PROGRA~1\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<2010-10-15 上午01时13分40秒 VET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
<2010-10-15 上午01时13分41秒 VET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<2010-10-15 上午01时13分42秒 VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<2010-10-15 上午01时13分42秒 VET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<2010-10-15 上午01时13分42秒 VET> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\gerry\Application Data\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<2010-10-15 上午01时13分42秒 VET> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\gerry\Application Data\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00020. Log messages will continue to be logged in C:\Documents and Settings\gerry\Application Data\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<2010-10-15 上午01时13分42秒 VET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Documents and Settings\gerry\Application Data\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<2010-10-15 上午01时13分44秒 VET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<2010-10-15 上午01时13分48秒 VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<2010-10-15 上午01时13分48秒 VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<2010-10-15 上午01时13分51秒 VET> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\gerry\Application Data\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<2010-10-15 上午01时13分51秒 VET> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\gerry\Application Data\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00020. Log messages will continue to be logged in C:\Documents and Settings\gerry\Application Data\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<2010-10-15 上午01时13分51秒 VET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<2010-10-15 上午01时13分52秒 VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<2010-10-15 上午01时13分52秒 VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<2010-10-15 上午01时13分52秒 VET> <Warning> <Server> <BEA-002611> <Hostname "gerry-cn.peoplesoft.com", maps to multiple IP addresses: 10.182.105.125, 192.168.149.1, 192.168.126.1>
<2010-10-15 上午01时13分52秒 VET> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<2010-10-15 上午01时13分52秒 VET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.126.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<2010-10-15 上午01时13分52秒 VET> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 10.182.105.125:7101 for protocols iiop, t3, ldap, snmp, http.>
<2010-10-15 上午01时13分52秒 VET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.149.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<2010-10-15 上午01时13分52秒 VET> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<2010-10-15 上午01时13分52秒 VET> <Warning> <Server> <BEA-002611> <Hostname "GERRY-CN", maps to multiple IP addresses: 10.182.105.125, 192.168.149.1, 192.168.126.1>
<2010-10-15 上午01时13分52秒 VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<2010-10-15 上午01时13分52秒 VET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
as normal there would have a URL link displayed in the weblogic log, is that right? any one can give tips?

Looks like you have a proxy configured, and that proxy (of course) doesn't support routing to 127.0.0.1
[01:05:26 AM] t3://127.0.0.1:7101: Destination unreachable; nested exception is:
java.net.ProtocolException: unrecognized response from proxy: 'HTTP/1.1 500 Server Error'; No available router to destinationUnset your proxy (Tools->Preferences->Web Browser & Proxy)
John

What is the URL to the EM in the integrated weblogic server?

Hello,
What is the URL to the Enterprise Manager in the integrated weblogic server included in the JDeveloper 11.1.1.4 package?
There is a server running on http://127.0.0.1:7101/ , but if I click on the first link I see on right panel "Go to Fusion Middleware Control" , it redirects to http://127.0.0.1:7101/em , where a PAGE NOT FOUND 404 error is issued. Do you have any idea about this problem?
Thanks.

The integrated WLS does not have the EM installed. So you can't access it. However, you can install the EM in the embedded WLS if you like and have memory to spare.
Timo

Who is responsible for integration of the different function modules?

Hi All,
Please tell me who would do rather who is responsible for doing the following kinds of integrations SD-MM-FICO, SD-MM, SD-FICO and so on? What would be the role of ABAPers in these kind of integrations?
Regards,
MD

Hi MD,
The functional team (from each module that is implemented) from the Implementation team along with the CORE team from the client end, together are responsible for carrying out the integration (testing).
Any defects identified are to be fixed by the implementation team consultants. ABAP consultants are required to carry out any investigation/debugging required to fix the issues identified (if they are ABAP code related).
Hope this clarifies.
Best Regards,
Shyam

Comparison of the Different Groupware Integration Technologies - Server-Based Groupware Integration - SAP Library

Similar Messages

Maybe you are looking for