Comparison Refresh System

Hello experts,
I'd like to know what the best solution for refreshing systems between Data Sync Manager from Epiuse (DSM) and Landscape Virtualization Management from SAP (LVM).
I've already read a lot of papers about both solutions like this one:
Comparisons between SAP TDMS vs. 3rd Party Data transfer tools
Of course I also took a look to a lot of papers talking about how great both are.
What I want is feedback from people who could use these solutions for data copy, their pros and cons, especially cons.
I know that the greatest point of DSM is that it can slice data by time or objects to make the target system lighter than the source, and LVM can do also copy and post copy automation (PCA) with a bundle for a better system administration. Both can also do data scrambling, even if for LVM we have to use another solution like SAP TDMS. Both support the most important old and recent SAP application releases (ERP, SRM, CRM, GTS, BW,SCM, NW).
So please, give me some points that could make me decide what's the best one.
Thank you in advance.
Best regards,
Alex.
P.S.: if you want to talk about other solutions than SAP LVM and Epiuse DSM, please do, it could help others.

Here is an interesting discussion on TDMS vs DSM:
SAP TDMS - comparison with Data Sync Manager
So now the comparison would be TDMS vs LVM vs DSM.

Similar Messages

How to Refresh System Form in Run Time

Dear All,
Please give me idea for Refresh System Document in Run Time using DI,basically I am using system columns for update for some scenarios.
So please give solution that how should refresh system form.
Thanks a lot.
Ashish Singh.

Hi,
Please post above discussion in SDK forum.
Thanks & Regards,
Nagarajan

Refresh system matrix

I have added a user defined field at the row level.I am performing some calculation on this udf in the goods receipt po form.I need to refresh this system matrix after performing calculations.Is it possible to refresh system matrix programatically ?

Hi Dilip,
Anoop is right, there is no function for refreshing the matrix so you'll have to get around it like this:
1. Update the document
2. Freeze the form
3. Put the form in Find mode
4. Fill in the document number (docnum)
5. Programmatically click the Find button (OK button)
6. Put the form back in the mode it was before
7. Unfreeze the form
Regards,
Marnix

How to Refresh System Form on Before Action using DI

Dear All,
Please give me idea for Refresh System Document in Run Time on Before Action using DI,basically I am using system columns for update for some scenarios.
So please give solution that how should refresh system form.
Thanks a lot.
Ashish Singh.

Hi,
See i already descrived you my case what i am exactly doing.
Now,
Document Name -Purchase Order
All The item is non excisable and i want to put value in Assable Column for calculation Tax but when i non excisable then you can not put value in Assable column.so when user will add purchase order then i updating Excisable columns with value of 'Y' for Assable value.now this case is running correctly.
But if any change will come of particular purchase order then user need to put value in any field and now i am supposing change field is remarks.
And Then user click on update filed button then system giving error that "there is excisable item with non-excisable tax code" and after this not allow to update.but i wrote code in item press before action for update excisable filed with value of 'N' for time being. but the case is sap not refresh doc when i changed any any value ,
so main concern is i want to reflect value with front end immediate.
Thanks
Ashish

The tables KNA1 & KNVV hasn't changed of owner after a refresh system

Hi,
Follow-up of this request:
Re: Error message after refreshing system
After a second refresh with another restore DB files, the result is the same. The script change_user has finished successfully (without error message), and SAP has started correctly.
But the tables KNA1 & KNVV didn't change of owner.
Thank you for your help.
Fabrice CHAINE

Yes, the message n° 0020079747 0000322840 2008
created 16.04.2008 - 14:32:02 CET
Thanks,
Fabrice

System Refresh/ System Copy

Hello All,
Can you some body suggest me the steps for system refresh & System copy with Oracle 9i as database.
Please provide me with the step by step details. I need to do the refresh from my production to QA system.
i am using NW04 > BW3.5> Oracle 9i--> Windows 2003 server and HP Unix .
I need to do this in both the OS.
Please provide me the entire steps .
Thanks,
Veera

Hello Veera ,
Check the link's
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/quality-refresh-331999
http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c4e4ba111d189750000e8322d00/c\
ontent.htm
hope it helps
Regards,
Jafer

Error During importing Transport Request into New Refreshed system

Dear Experts,
we have refreshed the Development BI system ( DB0 ) with DB1 which is
our New development system for Release 2 on Nov 5th ,2007. The
additional transports which went successfully to production till date
should to be manually moved to DB1.Some of the transports which are
involved ODS are getting failed with the below Error.
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
Activation of Objects with Type DataStore Object
Checking Objects with Type DataStore Object
Checking DataStore Object ZOTCODF3
DataStore object ZOTCODF3 is consistent
Saving Objects with Type DataStore Object
Internal Activation (DataStore Object )
Preprocessing / Creation of DDIC Objects for DataStore Object ZOTCODF3
Database table /BIC/AZOTCODF340 was deleted
Table/view /BIC/AZOTCODF300 (type 0) from DataStore object ZOTCODF3 saved
Creation/deletion of indexes for active table
Table/view /BIC/AZOTCODF340 (type 4) from DataStore object ZOTCODF3 saved
Table type /BIC/WAZOTCODF300 saved
Table/view /BIC/VZOTCODF32 (type VIEW) from DataStore object ZOTCODF3 saved
Change log for DataStore object "ZOTCODF3" saved successfully
Activate all Dictionary objects ( 5 ):
All DDIC objects have been activated / deleted
Post Processing/Checking the Activation for DataStore Object ZOTCODF3
Creating Export DataSource and dependent Objects
The creation of the export DataSource failedReading the Metadata of ZOTCODF3 ...
Creating DataSource 8ZOTCODF3 ...
Name or password is incorrect (repeat lo gon)
Name or password is incorrect (repeat lo gon)Error when creating the export DataSource and dependent ObjectsCompare active / modified versions for DataStore object &2
Update/activation program for DataStore object ZOTCODF3 is being regenerated
Error when activating DataStore Object ZOTCODF3
Resetting of Incorrect Objects Back to the Active Version (DataStore Object )
Preprocessing / Creation of DDIC Objects for DataStore Object ZOTCODF3
Database table /BIC/AZOTCODF340 was deleted
Table/view /BIC/AZOTCODF300 (type 0) from DataStore object ZOTCODF3 saved
Creation/deletion of indexes for active table
Table/view /BIC/AZOTCODF340 (type 4) from DataStore object ZOTCODF3 saved
Table type /BIC/WAZOTCODF300 saved
Table/view /BIC/VZOTCODF32 (type VIEW) from DataStore object ZOTCODF3 saved
Versioning not possible for PSA 8ZOTCODF3_CA
Error while saving change log for DataStore object ZOTCODF3
When i tried to reimport, DDIC is getting locked.we havent changed DDIC
password as we confirmed logging with the password we have.
we are on Stack 11. Please help us in resolving the issue at the
earliest.
Regards
Ravi Patneedi

Hi,
Ask Basis people, to check myself datamart RFC login through SM59 via background user(ALEREMOTE). Issue related with Initial password .
Regards,
Saran

How to dynamically refresh system properties when changed

Hi All,
Through weblogic startup class I'm loading the properties from a properties file
into system properties, Now my requirement is to refresh those system properties
when ever I make changes to the properties.
Is there any way to achieve this functionality through MBeans.

Hello Lucky,
I believe you cannot refresh properties file dynamically using MBeans. What
you can do is write an MBean which necessrily mirror your property file and
register with MBeanServer. You can set values on the MBean dynamically but
in order to persist your changes you need to write your own persistance
mechanism.
Cheers
Ali
"Lucky" <[email protected]> wrote in message
news:3f84d68f$[email protected]..
>
Hi All,
Through weblogic startup class I'm loading the properties from aproperties file
into system properties, Now my requirement is to refresh those systemproperties
when ever I make changes to the properties.
Is there any way to achieve this functionality through MBeans.

Automating ABAP version comparisons across systems

Hi Team,
I am trying to create a report which would accept a given transport number and compare the object inside (ABAP code/transformation) to its active version in the production systems and spot differences, if any.
I know this can be done via Se38 - Utilities - Versions - Version Management - Remote Comparison.
I also know that ABAP4_CALL_TRANSACTION can be used to call SE38 but I am unable to figure out how to pass the input of object name and go further into drilldowns via this report/program.
Any inputs would be greatly appreciated.
Thanks
Purnima

Purnima Viswanath, indeed ZARC does not have this feature. Yet. As you know, this is an open source solution, and anyone - including you - can contribute to it. And when I say you, I mean specially you. Why? Because most developers who contributed to a specific open source project were users first. They had recognized a true value in it, but also some gaps that would make the leap from a good project to a great one. This has happened to Linux, Wordpress, SAPlink and so many other projects. And I truly deeply believe that ZARC can make this leap at some point, but it needs contributors.
So I invite you to add this (very important, in my opinion) piece of functionality. And if you think you need a better understanding on ZARC's architecture or anything else related to ZARC, please feel free to contact me and I will happily help you help ZARC.
I wrote ZARC for a very personal/selfish reason. Then I decided to improve it's architecture and share it so other people like you can also benefit from it. Now it's your turn. Please, use ZARC as an accelerator or shortcut for solving your real need. And please, share it with us all, so other people can benefit from it, just like you did.
Thank you!

Role Comparison Cross System - alternatives to RSUSR050

Hello Experts,
Would there be an alternative for Cross system role comparison outside of using RSUSR050 ?
We have a variety of landscapes and are on different basis levels...SAP notes have corrected all but one
which is older release level- business not ready to upgrade this one
I have dabbled with SCMP tcode but results are not clear or complete. I was using table AGR_1250 and 1251
Any thoughts appreciated ..
Dan.

Thanks Bernhard,
i guess i need a little instruction on how to use this tcode (if that's the best method). When i compare 2 roles that are different
SCMP notes they are the same ? but i notice there is a field that selects Role id - only allows one numeric input. Can't seem to
get an entire display of the auth objects. I did this by entering our RFC dest and table name AGR_1251.
Any other alternatives. The SUIM (RSUSR050) works fine functionally and we have RFC dest but because of the differing Basis levels on this particular destination server- the results are erroneous and incomplete. Thanks !

SLT refresh/system copy

Hi,
We would be going for a SLT refersh from production to Acceptance.
Please do share any documents related to this.
Thanks,
Rajiv

Hi Rajiv,
Early last year I discussed with my customer approaches how such a refresh could be realized and what needs to be considered.
I can share my thoughts with you, however I have to emphasize that we never tested the procedures in detail. And in nowadays versions of SLT some transactions might be different.
So please keep them as a hint but not as a guideline.
How-to refresh QAS from PRD in SLT scenario?
Landscape:
Production landscape consist of ERP-system PRD, with replication to HANA-database HAP via SLT-server SLP
Quality landscape consist of ERP-system QAS, with replication to HANA-database HAQ via SLT-server SLQ
Scenario:
QAS system should be refreshed with recent PRD data
Approaches:
A. Refresh QAS from PRD, clean HAQ, repeat replication
B. Refresh QAS from PRD, HAQ from HAP and SLQ from SLP
A. Detailed steps for approach A: Refresh + repeat replication
** not tested **
1. Backup PRD
2. Stop the master replication job in HAQ (transaction LTR -> jobs tab -> Edit -> Stop)
3. Refresh QAS from ERP backup
4. Clean up old replication
a. Delete old configuration in HAQ (transaction LTR)
b. Delete triggers in refreshed QAS system
i. Call transaction IUUC_REMOTE à Expert Functions à Delete Triggers à Enter the names of the replicated tables à Execute
If step i. is successful, continue with step c., otherwise go on with next step ii.-iv.
ii. Determine all triggers
iii. Execute function module DB_DROP_TRIG in transaction SE37 for every trigger (specify EXEC = X, TABNAME = tabname and TRIG_NAME = trigger name)
iv. Verify that no triggers remain
Alternative: You can also write a sqlscript for all tables/triggers and run it on db level
c. Delete logging tables in refreshed QAS system:
d. List all logging tables: transaction SE11, enter /1CADMC/* à press F4 key; then copy the logging table names to notepad; copy all names into the clipboard
i. Call transaction IUUC_REMOTE à Expert Functions à Delete Logging Tables à copy the trigger names from clipboard to the input selection à Execute
ii. Verify that all logging tables have been deleted (as in i.). It seems that the logging tables for DD02L and DD02T will still exist; in this case drop the two logging tables in DB level.
e. Cleanup SLT server HAQ:
i. IUUC_REPL_CONFIG: Should be empty
ii. IUUC_REPL_CONPAR: Should be empty
iii. IUUC_REPL_HDR Should be empty
iv. IUUC_REPL_MAP Should be empty
v. IUUC_RS_STATUS Should be empty
vi. IUUC_RS_ORDER Should be empty
vii. IUUC_TABLES Should be empty
viii. DMC_COBJ Should be empty
ix. DMC_MT_TABLES Should be empty
x. IUUC_LOGTAB_ID Will be filled, so delete the entries with transaction SE16
xi. DMC_STRUC_ID Will be filled, so delete the entries with transaction SE16
xii. DMC_ACT_REC Will be filled, so delete the entries with transaction SE16
xiii. Run report DMC_CLEANUP_USAGE in transaction SE38 with flag ‘delete all kinds of zombies’
xiv. Run report DMC_CLEANUP_USAGE in transaction SE38 with flag ‘delete all kinds of zombies’ and subproject = ZIUUC_<MTID> with <MTID> is the name of the mass transfer id of the configuration
xv. DMC_MT_HEADER Will be filled, so delete the entries with transaction SE16
f. HANA Studio connect with SYSTEM user to HAQ, go to Catalog > Authorization > Users and delete the user of the replication (cascade option)
5. Setup new configuration in SLQ
a. Check RFC connection in transaction SM59 from SLQ to QAS
b. Transaction LTR: Create new configuration
c. In the studio, check schema created in HAQ
d. In the studio, data provisioning, verify that tables DD02L, DD02T and DD08L are replicated
e. Prepare a text file with all tables to be replicated
f. In the studio, data provisioning, load the text file and add the tables to the replication
B. Detailed steps for approach B: Consistent Refresh all Systems
** not tested **
1. Backup all systems
a. Stop the master replication job in HAP (transaction LTR -> jobs tab -> Edit -> Stop)
b. Backup first PRD, then HAP and finally SLP
c. Start the master replication job in HAP again (transaction LTR)
2. Refresh QAS from ERP backup, no BDLS
3. Refresh HAQ from HAP backup
4. Refresh SLQ from SLP backup
5. Adapt SLT configuration, i.e. RFC connection to QAS in SLQ
6. Adopt hana server name in SLT configuration(/LTR), can be done inside db connection to HANA(/DBCO)
7. Update table “SYS_REPL”.”RS_REPLICATION_COMPONENTS” in hana and change the server name and configuration for the SLT replications.
8. Start the master replication job in HAQ again (transaction LTR)
9. Run BDLS in QAS to change logical system name (SLT will replicate the changes to HANA)
END *

Refresh system

Pavilion g7 , I did a refresh of system and it wipped out 34 apps most of which came with the computer how do I get these back?

When requesting assistance, please provide the complete model name and product number (pn) of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
Using the Windows Store, you should be able to reinstall all the Apps were previously downloaded. However, you will need to reinstall the HP value-added Apps by using the HP Recovery Manager. Please see Using Recovery Manager to Restore Software and Drivers (Windows 8) for instructions on doing so. If the above doesn't work, you may need to perform an HP System Recovery from the recovery partition, USB recovery Flash Drive, or recovery DVDs. Please see Performing an HP System Recovery (Windows 8) for those instructions.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Error message after refreshing system

Dear all,
During the refresh of the Qual system by the Production system, the script user_change.sql failed (note 551915). The script change the old SID (pe1) by the new on (qe2).
The script have updated all tables of the database exept 2 tables (KNA1 and KNVV). These tables keep the old name and the old owner(pe1.KNA1 and pe1.KNVV)
Error message: "Object 'pe1.KNA1' does not exist or is not a valid object for this operation"
I have check these tables into Dev environment and it didn't been changed.
Thank you for your help.
Fabrice CHAINE

Hello,
can you send us the result of
use QE2
select name,uid,xtype from sysobjects where name in ('KNA1','KNVV')
or when you are running on SQL 2005
select name,schema_id,xtype from sys.objects where name in ('KNA1','KNVV')
regards
Clas

Remote comparison between systems on a table

Hi All,
I would like to do similar thing I can see in the program version control remote comparison, but for tables contents. I found an RFC "TABLE_ENTRIES_GET_VIA_RFC" which can be used for this. Nevertheless, do you have any other suggestions which do not use logon procedure if it's not necessary(like in the program version control)? Thanks for your help in advance.
Regards,
Gyula

Gyula,
I believe it is all controlled in SM59 where you can set the login id and password as trusted. Whe you call this function module remotely from your program, the logical destination system set in SM59 probably not set as trusted.

After refreshing system Windows 8 I can't Insert page nos or headers in documents

help

Hello Saltyscan,
I understand that your MS Office is not working correctly after you refreshed your operating system. I am providing you with some steps to follow below to resolve this issue:
Step 1. At the Tiles Menu type Control Panel
Step 2. Click Control Panel
Step 3. Click Programs
Step 4. Click Programs and Features
Step 5. Select your Microsoft Office program
Step 6. Click Change
Step 7. Select Online Repair
Step 8. Click Repair
After Online Repair process is complete, you should be able to use your Office applications should work correctly.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Comparison Refresh System

Similar Messages

Maybe you are looking for