Comparisons between X61s and X201s - and X201 and X201s

I have been very happy with my x61s since prchasing it in Jan 2008. However, I need to migrate to a new notebook, want to have a similar experience with the new machine and am therefore considering the X201 series. Can anyone give me a high-level comparison (I've reviewed the tech specs at lenovo.com already) between the x61s and the x201 series? I am also interested in the differences between the x201 and the x201s.
Finally, will the x61 docking base that I purchased for that notebook work on the x201 or x201s?
Thanks!

X61s Specification
Display
12.1" (1024 x 768) XGA
Operating System
Windows Vista Business, Windows XP Professional, Windows Vista Ultimate
Processor
Core 2 Duo 1.6 GHz
Memory
1 GB - 2 GB
Hard Drive
80 GB - 160 GB Serial ATA (5400 - 7200 rpm)
Graphics Card
GMA X3100
Optical Drive
DVD-Writer, DVD±RW (±R DL) / DVD-RAM
Connectivity
Bluetooth 2.0 + EDR (Enhanced Data Rate)
Ethernet (RJ-45 connector)
Wireless LAN
Ports and Expandibility
Audio in
Audio out
Three Hi-Speed USB ports
VGA port
CardBus
Card reader
RJ11 Modem jack
Firewire
Battery
8.2 hours - 9 hours
8 cell 5200 mAh lithium ion
Dimensions
10.6" x 9.4" x 0.8" - 1.4" (26.9cm x 23.9cm x 2cm - 3.6cm)
Weight
3.3 lbs - 3.6 lbs (1.5 kg - 1.63 kg)
Built in Extras
Fingerprint reader
X201s Specification
Display
12.1" (1440 x 900) WXGA+
Operating System
Windows 7 Professional 64-bit Edition
Processor
Core i7 2.13 GHz
Memory
4 GB - 8 GB
Hard Drive
320 GB Serial ATA (7200 rpm)
Graphics Card
GMA HD
Optical Drive
DVD-Writer
Connectivity
Bluetooth 2.1 + EDR (Enhanced Data Rate)
Ethernet (RJ-45 connector)
Wireless LAN
Ports and Expandibility
Audio in
Audio out
Three Hi-speed USB ports
VGA port
Express card 54
5-in-1 card reader
RJ11 Modem jack
Battery
7.4 hours
6 cell lithium ion
Dimensions
11.6" x 8.3" x 1.4" (29.46cm x 21.08cm x 3.56cm)
Weight
2.7 lbs (1.22 kg)
Built in Extras
Fingerprint reader
X201 Specification
Display
12.1" 1280 x 800 (WXGA)
Operating System
Windows 7 Professional
Processor
Core i5 2.53 GHz
Memory
2 GB - 8 GB
Hard Drive
250 GB Serial ATA (5400 rpm) / 320 GB Serial ATA (7200 rpm)
Graphics Card
GMA HD
Optical Drive
DVD-Writer
Connectivity
Bluetooth 2.1 + EDR (Enhanced Data Rate)
Ethernet (RJ-45 connector)
Wireless LAN
Ports and Expandibility
Audio in
Audio out
Three USB 2.0 ports
5-in-1 card reader
RJ11 Modem jack
Battery
6.7 hours
6 cell llithium ion
Dimensions
11.6" x 8.3" x 1.4" (29.64cm x 21cm x 3.56cm)
Weight
3.2 lbs (1.45 kg)
Built in Extras
Fingerprint reader
Webcam
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Similar Messages

Functional and technical comparisons between JDE version A 7.3 and A 9.3

Hi,
We need to convert the modules already written/designed in JDE v A 7.3 to JDE v 9.3.
So I need to discuss with you people the functional/technical comparisons between these two versions.
I have gone through these links to know something:
http://www.teamcain.com/media-center/blog/oracle%E2%80%99s-jd-edwards-enterpriseone-91-and-jd-edwards-world-a93-%E2%80%93-exciting-news-ora-0
http://www.oracle.com/us/products/applications/jd-edwards-world/jde-world-a9-3-1596334.html
Kindly advise on it.
Thanks,

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Comparison between 10GR3(Web Center Interaction) Portal and ALUI 6.5 MP1

Hi All,
I need details of specific advantages of Oracle 10GR3 (Web Center Interaction) Portal over ALUI 6.5
Please can anyone share any documentaion regarding this if you something available readymade. I need it urgently.

Blog entry from Brian Harrison, the product manager of WCI:
http://blogs.oracle.com/WCI/
"Should I Upgrade to WCI 10gR3":
Surprisingly, this is not an easy question to answer. If you are currently running a version of ALUI 6.5, then there is truly not a great reason for upgrading, because there were not a lot of changes made between ALUI 6.5 MP1 and WCI 10gR3. In fact, we essentially think of WCI 10gR3 as ALUI 6.5 MP2. Here is a list of the primary changes that were made to create WCI 10gR3:
• New Adaptive Layouts for iPhone
• New Experience Rule for IP addresses
• Oracle Branding
• Removal of license key requirements
• A few bug fixes across different areas of the products
If one or more of the above items are important, then there may be a good reason to upgrade to WCI 10gR3. However, if the above items are not important, then maybe it isn’t important for you to upgrade quite yet.
On the other hand, if you are currently running a version of ALUI 6.x prior to 6.5, then there are a lot of great reasons for upgrading because there were a lot of new features added between 6.x and WCI 10gR3. The new UI engine called Adaptive Layouts is definitely a very significant improvement as well as the availability of the new Friendly URLs feature. In almost every instance, I would recommend that a ALUI 6.0 or 6.1 customer upgrade to WCI 10gR3.

Comparison between Photo Deluxe Bus. Edition and current Photoshop programs?

I'm still using Photo Deluxe with Windows XP, and I know the XP emulator on Windows 7 Pro should allow PD to still work, but the next OS may not.
Can someone who's familiar with Adobe Photo Deluxe Business Edition and Photoshop tell me what current version of Photoshop will give me the same abilities as Photo Deluxe Business Edition did? (Or will come the closest.)
If anything possible in Photo Deluxe just CAN'T be done with current Photoshop programs, could you also specify what those lost features would be?

Perhaps this will be helpful from an old thread on web.
"I transitioned from Deluxe 2 to Photoshop Elements (V. 1 and now 2) last year. I do the same kind of projects as you and really enjoy using Elements. Elements is much closer to providing the same functionality as the pricier Photoshop. The interface has less obnoxious "guide me" kinds of presentations that mar Deluxe and allows you to control the amount of application-provided help to a greater degree than with Deluxe. The only thing Elements lacks that Photoshop offers are color management and separation functions for commercial printing.
Elements also has some tricks that Photoshop doesn't, especially the Photomerge feature. This lets you stitch (or rather blend) two or more images into one. I use it a lot in scanning items that are larger than my scanner window. Also great for panoramic shots and artsy collages.
Opinion: Elements is far superior to Deluxe. The clone tool alone is worth the new software."
Note: Believe they are now on Photoshop Elements 11, so should be even better. Still under $100 I believe.

Comparison between ipad 4 with retina display and ipad mini with retina display

Recently I bought an ipad mini with retina display, when playing clash of clans I found that ipad 4 having nicer graphic than ipad mini with retina display, why? I though ipad mini with retina display having better graphic.? Or my newly bought ipad mini with retina display got problem?

If you think your new iPad has a problem with the display Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Performance end to end testing and comparison between MPLS VPN and VPLS VPN

Hi,
I am student of MSc Network Security and as for my project which is " Comparison between MPLS L3 VPN and VPLS VPN, performance monitoring by end to end testing " I have heard a lot of buzz about VPLS as becoming NGN, I wanted to exppore that and produce a comparison report of which technology is better. To accomplish this I am using GNS3, with respect to the MPLS L3 VPN lab setup that is not a problem but I am stuck at the VPLS part how to setup that ? I have searched but unable to find any cost effective mean, even it is not possible in the university lab as we dont have 7600 series
I would appreciate any support, guidence, advice.
Thanks
Shahbaz

Hi Shahbaz,
I am not completely sure I understand your request.
MPLS VPN and VPLS are 2 technologies meant to address to different needs, L3 VPN as opposed as L2 VPN. Not completely sure how you would compare them in terms of performance. Would you compare the performance of a F1 racing car with a Rally racing car?
From the ISP point of view there is little difference (if we don't want to consider the specific inherent peculiarities of each technology) , as in the very basic scenarios we can boil down to the following basic operations for both:
Ingress PE impose 2 labels (at least)
Core Ps swap top most MPLS label
Egress PE removes last label exposing underlying packet or frame.
So whether the LSRs deal with underlying L2 frames or L3 IP packets there is no real difference in terms of performance (actually the P routers don't even notice any difference).
About simulators, I am not aware of anyone able to simulate a L2 VPN (AtoM or VPLS).
Riccardo

Comparison between cFP and cDAQ

Hi,
I'm looking for (as much details as possible) a comparisons between compact Fieldpoint and compact DAQ hardware. I'm trying to decide which hardware platforms to use.
TIA

Compact Fieldpoint is for installed, industrial type applications. It has a realtime operating system. The controller runs code to read inputs and operate outputs. The application can be distributed on an ethernet network. There are different modules available for different types of inputs and ouputs.
Compact DAQ also has numerous input and output modules. It is more intended for portable applications. It connects to your PC through a USB port. So the code would need to run on the PC

[AS-CS5] Comparison between text style range and character style

Hi,
It's been a while since I'm not coming on this forum ...
I'm looking to make a comparison between a "text style range" and a character style.
I have no problems, except for the comparison of "fonts".
myCurrentText = text for char…
theStyle = character style id…
I try:
       if (applied font of myCurrentText ≠ applied font of theStyle) then set theCharDifference to 1
The selected text give me:
       font "Minion Pro        Italic" of application "Adobe InDesign CS5.5"
and the character style:
       "Minion Pro"
I try "set theTextFont to font of applied font of myCurrentText" -> Error
This is my script (it's too long to post here) <http://db.tt/BLoGPiN>.
Loot at the "on CheckCharacterDifference(myCurrentText, theStyle)"
TIA.
Oli.

I've written this, but I do not know if it covers all cases ...
Someone?
Thanks.
Oli.
set theText to item 1 of selection
set theStyleChar to properties of character style 2
-- analysis of the properties of the text
set myTextFontApplied to applied font of theText
set myTextFontFamily to font family of applied font of theText
set myTextFontStyle to font style of theText
-- analysis of the character style
set myStyleCharFontStyle to applied font of theStyleChar
if myStyleCharFontStyle = "" then
     set myStyleCharFontStyle to font style of theStyleChar
     if myStyleCharFontStyle ≠ myTextFontStyle then set theDifference to true
else
     if myStyleCharFontStyle ≠ myTextFontFamily then set theDifference to true
end if
Message was edited by: OlivierBerquin

Comparison between Oracle Contracts and Oracle Procurement Contracts?

Hi All,
I need some document which give the Comparison between Oracle Contracts and Oracle Procurement Contracts?
And which of them are suitable for what type of contracts?
Thanks
Syed

Hi,
Any kind of help plz.
Regards,
Subhra

Comparison Between Oracle eBS and JD Edwards

Hi All,
Is there any site / document / any kind of referference / help on comparison between Oracle-eBS and JD Edwards mainly for Finance and SCM module please ? Need this urgently so any help is appreciated.
Thanks & Regards,
Subhra Saha

Hi,
Any kind of help plz.
Regards,
Subhra

Comparison between Purisma and JCAPS?

I am researching several CDI (Customer Data Integration) solutions and I've narrowed this down to two solutions Purisma and JCAPS. I am mainly comparing the matching engines, record linkage efficiency and any machine learning capabilities.
Has anyone done a "head-to-head" comparison between JCAPS and Purisma?
Does anyone have any screenshots of the JCAPS record linkage tool for manual duplicate handling?
My blog: http://mycodeblog.blogspot.com

Why not write a test class? Shouldn't take long.

Comparison between Forms6i and Forms9i

We have some client/server-based applications built in Forms6i and are considering to convert/rebuild them into Forms9i or JDeveloper as web-based applications. Has anyone done any comparison between Forms6i and Forms9i/JDeveloper? Or, can you point me to such documentation if existed?
Thanks.

For comparison between forms 6i and Oracle9i Forms check out the new features paper on:
http://otn.oracle.com/products/forms
Comparison to JDeveloper? How about the fact that you develop with Java language in JDeveloper and with PL/SQL in Forms.
I would suggest that first you try to run your application on the Web using forms 6i. This should be a very simple test to do. See how you like it and only then ask yourself if you really need to go to JDeveloper.

Comparison between 3750 and 3750-metro

hi folks,
is there any links which will provide me on the comparison between 3750 and 3750-metro? for exapmple, isis is not support on 3750 but it support on 3750-metro. The product information from cisco site is insufficient in term of the main differences :p
rgd
josh.w

Hi Josh,
The Cisco Catalyst 3750 Metro Series is built for Metro Ethernet access in a customer location, enabling the delivery of more differentiated Metro Ethernet services. These switches feature bidirectional hierarchical QoS and Traffic Shaping, intelligent 802.1Q tunneling with class-of-service (CoS) mutation, VLAN translation, MPLS, EoMPLS, and Hierarchical Virtual Private LAN Service (H-VPLS) support, and redundant AC or DC power. They are ideal for service providers seeking to deliver profitable business services, such as Layer 2, Layer 3, and MPLS VPNs, in a variety of bandwidths and with different SLAs.
The metro switches have the PXF chips (which allow hierarchical QoS on the 2 "WAN" GigE ports, so several logical links can share a connection, and have soft bandwidth limits).
For more details on 3750-M switches have a look at this link
http://www.cisco.com/en/US/products/hw/switches/ps5532/products_qanda_item09186a00801eb822.shtml
HTH
Ankur
*Pls rate all helpfull post

Comparison between PeopleSoft and Fusion

Hi ,
I need to prepare a document to show up the comparison between PeopleSoft and Fusion. For eg: Business Unit in PeopleSoft and what is the concept in Fusion that is similar to Business Unit. Can anyone help me with a document that will give me detailed comparison between PeopleSoft and Fusion.
Thanks,
Fathima Farsatha

I can't find any comparison on the internal database. Can you add more about your goals with the question? Are you stuck with a Business unit issue or functionality. Since Fusion was built form the ground up it is a completely different software product. If you have a very specific question then we might be able to collaborate with different groups and provide an answer or fix.

Comparison between OATS and QTP

Hi,
Does anyone have a kind of comparison between QTP and Oracle ATS ?
Thanks

Hi
I don't think there is a paper that compares both tools, is there anything in particular that you would like to know?
Regards
Alex

Comparisons between X61s and X201s - and X201 and X201s

Similar Messages

Maybe you are looking for