Compass not working

Hi.
first of all: sorry for my bad english :-D.
I'm not able to calibrate the compass on my iPhone 5S (iOS 7.0.4).
The iphone does not react on inclination while i'm trying to calibrate the compass.
After 20 seconds of trying to calibrate, the Calibration-Window closes and the Compass-Window appears,
but the compass is only rotating from north to east, from south to east etc.
I restored my iPhone over iTunes and set it up to "a new iPhone" but the Error is still there.
I got the same problem a month ago. I wanted to visit the Apple Store to tell my problem, but the fault disappeared suddenly.
The Apple-Support said there is a trick to recalibrate all sensors:
You have to lay down your iPhone on a flat level while it's on "Do Not Disturb"-Mode for 120mins.
It sounds funny. I tryed it, but it doesnt work.

ev1L wrote:
first of all: sorry for my bad english :-D.
Post in your native language, these are world-wide forums.

Similar Messages

  • Compass not working iphone 5 ios 6.1.4?

    Compass not working in my iphone 5 ios 6.1.4?
    What is the solution

    Friends, this is my first note.. I never face any problem with apple product... Now with this iphone 5 compass problem, i stuck.
    is it a software problem or hardware. Because i have iphone 4s running ios 7 and its fine. But iphone 5 compass not working. All the apps require compass support showing the same issue... Can anybody help.

  • Why does my compass not work

    MMy compass calibrates freezes and then goes to the compass screen but will not work.
    the spirit level works fine and the location shown is correct.

    The compass quit working on my 5S after upgrading to one of the versions of 8. After the next update it started working again. I suspect it's a software glitch rather than hardware. Try resetting and/or restoring your phone or update to the latest version.

  • Compass not working in lumia 720

    Hello nokia,
    Is there anybody in nokia caring for the customer issues.
    In may-2013 i had purchased the phone and after two days the phone just fallen from the height of 1.5 ft. the display got damaged.
    I visited to the nokia care in gurgaon, they said it will be repaired on chargeable basis.
    I paid the charges and phone was given to me after 10 days.
    The phone got repaired and the display was working perfectly.
    Last week i was trying to install the HERE nokia city lens, then there was an maessage that your phone doesn/t have the compass. I contacted the nokia customer care they said to visit the nokia care centre i visited there they done the software reset.but, after that also it was not working.
    they said the phone need to be send for the repair.The phone is OUT OF warranty& it will be on chargeable basis.
    Now, i bought the phone in 18300/- & then i paid the 11000/- for the repair.
    The phone costed me approx 29000/-.
    The problem was not checked properly at the time of repair.Its the duty of the nokia to check all the details of the phone before giving back to the customer.
    Is it my fault that i hadn't checked this problem before.
    Is it not the responsibility of nokia to check the complete phone before giving back to the customer.
    And your people says that they can't do anything as its against there policy.
    Is anyone there in nokia to answer the customer issues.
    And help them back.
    anyone having the customer care head on repair head details pls. help me with that.
    Moderator's note: We removed the email address and phone number mention in the message. Posting of such personal information in a public forum is not recommended. 
    Attachments:
    wp_ss_20130702_0001.png ‏72 KB
    wp_ss_20130702_0002.png ‏53 KB

    you're right.. they should have checked the fone completely for other damages. it really is a hassle to have to come back for something that wasn't fixed, although you asked them to fix something else. at any rate, i think you should still have to pay for it since it's no longer under warranty :/
    this app may help... [click here]
    it checks the fone's various hardware & sensors.
    remoamit wrote:
    Hi KennyKB
    Thanx for the suggestion.
    They nokia is saying that its an out of warranty now.So no repair free of cost.
    My problem is that why it is not checked before giving back the phone after repair.
    regards

  • Compass not working on iPhone5S

    I started the compass app on iPhone 5S and calibrated it. After calibration the compass showed up but didn't move. As if it were stuck/jammed at zero, like showing no response. But the level worked fine. Also all compass apps didn't worked

    reset all settings
    settings-general-reset-reset all settings
    now reconnect to wifi
    settings- wifi- click network name- enter password - join
    if issue persist back up and restore as new via iTunes
    Peace, Clyde

  • 4s compass not working with iso7 also stops Skyview apps from working

    Is there a fix for this problem or go back to previous version of software

    There is no support for downgrading.
    Delete the compass from multitask-list
    Do a
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.

    I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.

    Only the carrier that the iPhone was locked to can unlock. There you go, hacking void any support from this forum.

  • WIFI not working on iphone 4 after ios 7 upgrade

    I just upgrded my iphone 4 to ios 7.
    I am trying to set up my wifi with it and it's not working.
    How can I set up my wifi within ios 7 so it works on my iphone 4?
    It just keep sayiing "Unable to join network"
    Thanks in advance.
    I phone 4
    ios 7

    Well it asks for you to rotate the red ball around the circle, which I do and then the compass displays but there is no direction or bearing provided, just some co-ordinates in the bottom RH cnr. If I move it about or press the compass it does nothing !
    Also at the top there is a red arrow on a narrow white marker which if I press down on seems to give a white blob and then disappears. not clear what that is for either
    I have tried resetting the phone and not having true north marked, makes no difference to when I first tried it.

  • StarWalk compass stopped working with their most recent update.

    My favorite application on my iPad used to be Starwalk. Ever since their most recent update on April 30, the internal compass stopped working (which is basically the backbone of the entire app). I contacted Vito technology (the developer) - it took a long time to get a response, but after several efforts they finally replied that there was a flaw in the iPad's internal Magnetometer, that it had nothing to do with their software, and there was nothing they could do about it - I should take it up with Apple. The app worked perfectly until their most recent update. I looked at their reviews/comments and numerous people were making the exact same complaint, and everyone said it stopped working as the result of the April 30 Starwalk update. I have one friend with a 3G iPad and the app still works fine for him. I have another friend with a wiFi version like me, and the app ALSO stopped working for him on April 30. So I understand not all iPads are affected.
    So am I supposed to take this up with Apple now and tell them there is a flaw in their magnetometer that caused StarWalk to break as of their last update, and see if they can fix all our devices?
    I don't believe Vito's assertion that their software is not at fault (considering so many people are complaining in their negative reviews that the last update triggered this breakage).
    I'm frustrated and wonder if anyone else is experiencing this. Starwalk used to be my favorite app, and its even more frustrating to listen to the developer tell me its a device flaw that's been there all along, when me and many other people all had simultaneous magnetometer problems develop on April 30 - the moment we installed their last update.

    Just that I have the latest from April 30 and there are no updates that are available to me. I guess you have the wifi only version as I do? I can't quite figure out why this would be affecting some people and not others. If you go to the StarWalk page on iTunes you'll see the list of people complaining about the same thing. In iTunes it also says my iPad software is up to date (I assume that means the OS/firmware).
    So do you guys think this is something I take up with StarWalk or Apple? I feel a little ripped off that Vito has sold me a $6 app (granted that is not much) that has stopped working, and they are telling me its a flaw in the device.
    I'll paste the response I received from Vito below. Bear in mind that although they say this has nothing to do with their software, all of the people who are complaining had a functioning app before April 30, and it stopped working as soon as we made that update.
    Thank you for taking time to send us your feedback, it is highly appreciated.
    In specific circumstances iPhone/iPad digital compass (magnetometer) may operate with difficulties, essentially causing errors in all applications that rely on its data.
    Unfortunately, we cannot fix this particular problem, because it is caused by the digital compass malfunction and has nothing to do with our software. However, we are happy to offer you directions which may help you avoid experiencing this inconvenience in the future.
    For better functioning of the digital compass consider doing the following:
    1) Tilt your device from landscape to portrait orientation several times. This will help the digital compass recalibrate itself and calculate current position.
    2) Make sure the compass is not obstructed by thick walls of buildings or large amounts of metal nearby. Try going outside.
    3) Consider trying again later. Sometimes it is unclear what may be influencing the magnetometer.
    If you need more information, please read the magnetometer specifications below.
    We hope that these simple instructions were of help. Please don't hesitate to contact us if you have any further questions.
    Sincerely,
    Vito Technology Support Team
    For more information:
    Wikidia article http://en.wikipedia.org/wiki/Digital_compass :
    "A magnetometer is a scientific instrument used to measure the strength and/or direction of the magnetic field in the vicinity of the instrument. Magnetism varies from place to place and differences in Earth's magnetic field (the magnetosphere) can be caused by the differing nature of rocks and the interaction between charged particles from the Sun and the magnetosphere of aplanet. Magnetometers are a frequent component instrument on spacecraft that explore planets."

  • What's going on with ios8... Screen rotate does not work anymore, wifi doesn't work very well anymore and apps are crashing or running slow... Come on Apple sort this mess out

    ssince I updated my iPhone 5s to ios8 ive had nothing but problems...
    first the the screen rotation is not working... Checked the settings and  lock is off.... The wifi is intermittent, some times it works sometimes it doesn't....
    the he iPhone is really slow now, like really labouring.... It hangs and crashes all the time.... I have to close apps down completely because they won't work from quick launch anymore.... Even writing this the phone is labouring.... It's like my old 48k spectrum.... I don't expect this from Apple and when you spend £400-500 on a phone you expect it to work and play propperly....  come on Apple you need to sort out this mess of a update.... Ios 7 was no bother......

    Same issue here... iphone5S 64GB.  It's intermittent.  Sometimes the rotation works fine, sometimes it doesn't, but most of the time it doesn't work.
    The first time I figured out it wasn't working was when all newly-taken photos and videos were showing up in portrait mode though I always hold in landscape mode when photographing.
    Rotation lock is disabled (tried toggling it on and off).  Tried recalibrating the compass on a whim, no effect (although my compass seems to always require calibration when it's launched now).
    This issue only started happening after upgrading to iOS8.  I did a reset/restore through iTunes rather than an OTA upgrade.
    UPDATE - power-cycling the phone seems to fix it temporarily.

  • My auto location service is not working on iphone 4s after updating to ios 8.1.3

    Hi every one
    i have recently facing a problem my compass and other apps which require location service are not working on my Iphone 4s, after i have upgrade my iphone ios to 8.1.3. Settings are correct i.e. location service is 'ON' and apps require location service are allowed to use my location.
    is anyone facing the same issue. Need your valuable suggestions and advices.
    Regards
    Muhammad Shahbaz
    Pakistan

    Greetings Biyase, 
    Thanks for contributing to the Apple Support Communities. 
    It sounds like the Outlook app is not launching after you updated iOS. In this case, I recommend the troubleshooting steps found at this link:
    If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Sincerely,
    Jeremy 

  • IPhone 3GS 3.1.2 GPS not working!

    Hi i need help..been trying the past 2 day to get the GPS to work...but it still cant work..this is what i have done..
    -Off 3G
    -Off Local
    -On Airplane
    -On Local
    open the map and locate us..sometimes it is able to locate me but most of the time the location is quite off my exact location....
    i try to route it..but the blue dot will just stay the starting point and it is not moving except the direction is moving...
    Also try to restore the frimware numerous of times...still cant get it work...
    i also try to remove my sim card and try to see whether it can pick up any GPS signal but it show nothing...
    Download montion x lt from app store...it cant detect any GPS signal, what it does only triangle using the GSM tower...
    Compass is working fine...
    so anyone can help? im runing out of option....
    was wondering whether is the GPS spolit or wat?
    any advise from expert here?
    tks

    Hi DJR81, it does indeed sound like the GPS could be out. Try contacting your service provider for a warranty repair.

  • Compass doesnt work

    My compass doesnt work, can some one help me?
    iPod touch lates version 2011

    The Apple's spec for the 4G do not mention a compass (the specs for the iPad do) and a Google search says the 4G does not have a compass.

  • Upgrade z1 to 4.4.4 accelerometer does not work anymore

    Hi
    After upgrading my Sony Xpera Z1 to Android 4.4.4 the App "Moves" (Protogeo) does not work anymore!
    It says: Tracking error, accelerometer does not work!
    This work fine before!
    See sceen shot attached.

    the compass does not work anymore also...
    Using AndroSensor the following is waiting for an Event:
    Accelerometer
    Gravity
    Gyroscope....
    something is wrong!

  • JCreator not working the way i want it.

    sorry for the catchy subject header...and my pre thanks for solution providers..
    PROBLEM I AM FACING:
    I am using JCreator pro and its intellisense is not working...I had previously installed JavaFX and then removed it...is it the side effect I am having ?
    MY NEXT PROBLEM:
    also i have copied java API docs to same folder as JDK ..now when i highlight the code and press F1 i don't get API doc for the highlighted keyword...instead a bookview is shown at the right corner.....what could be the problem...please explain the solution in a beginners tone..I am new to java...thank you very much once again..... :D

    Is this what you are looking for?
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
    <title>Untitled Document</title>
    <style>
    body {
        width: 940px;
        margin: auto;
    html {
        background: url(http://www.pwaworldtour.com/fileadmin/user/main_editors/images/hi_res/ARUBA_2011/A11_fs_WOMEN/A11_fs_ARU91_1755.jpg) no-repeat center center;
    .content {
        background: white;
        padding: 20px;
    </style>
    </head>
    <body>
    <div class="content">
        <h1>Header</h1>
        <p>Whose worth's unknown, although his height be taken. Let me not to the marriage of true minds admit impediments; love is not love love's not time's fool, though rosy lips and cheeks. Oh, no, it is an ever fixed mark which alters when it alteration finds, it is the star to every wand'ring bark. Let me not to the marriage of true minds admit impediments; love is not love within his bending sickle's compass come.</p>
        <p>Love's not time's fool, though rosy lips and cheeks if this be error and upon me proved, oh, no, it is an ever fixed mark. Or bends with the remover to remove. Admit impediments; love is not love whose worth's unknown, although his height be taken.</p>
        <p>Within his bending sickle's compass come; which alters when it alteration finds, but bears it out even to the edge of doom. That looks on tempests and is never shaken; love's not time's fool, though rosy lips and cheeks I never writ, nor no man ever loved. If this be error and upon me proved, within his bending sickle's compass come; it is the star to every wand'ring bark.</p>
    </div>
    </body>
    </html>

Maybe you are looking for

  • Error 7 with Report Generation Toolkit

    Hello Everyone, I'm trying to generate an Excel sheet report for some readings using "Report Generation toolkit" But when trying to generate the report, the report generation part of code is executed and gives Error(7) and there is no report is gener

  • HT2714 mac mini support windoews xp

    My new mac mini HDMI cable connect to TV HDMI, but TV do not display. Please advice Regards Cuestar

  • How to hide report background engine window

    hi i m using reports6i and when i run a report thorugh forms,reports background engine window also invoke and i want to hide that winodw .any one know how to hide report background engine or is this possibl. if so plz let me how to apply this. thnx i

  • How  different is SRM basis from R/3 basis?

    Could people share their experience on SRM basis? Thanks! Points guaranteed. Message was edited by:         Jeff davis

  • Images not visible using a local server with XAMPP

    HI I've resurrected an old project which worked in the past.  Since then, Ive upgraded both Windows (8.1) and Dreamweaver (CC)  Today I installed the latest XAMPP and created a folder called xamp2015.  I copied the old project (MySite) to the HTDOCS