Compatability between cloud and non-cloud versions

I'm pretty sure there will be no compatability problems between the same versions of cloud and non-cloud products. But what about the feature updates that are mentioned as a benefit of the cloud products. How do they effect the file format. Does it depend on whether or not I use a certain feature? Will these updates only provide features that don't change the file format? For example: If I have version 6.0 of non-cloud InDesign on one computer and 6.? of cloud InDesign with some new feature that hasn't made it into the non-cloud release yet, can I save a file with the cloud version and open it with the non-cloud version?

Hi ,
We really apologize for all the inconvenience which has caused you.
Yes you can open the files from recent version into 1 or in some cases 2 versions back by following the different workflows for each program
For example in In Design you can save the file as IDML and open in the previous version.
In the meanwhile if these steps doesnt resolve your issues you can contact Adobe support by following the link below:
http://helpx.adobe.com/contact/
Thanks
Mandhir

Similar Messages

How can I tell the difference between Academic and non-academic version

I would like to purchase Logic Express on Ebay. The Apple part number is
MA338Z/A
How can I tell if this is the Academic or non-academic version?
THanks

ok, but there is no way to tell from the Apple part #?
I thought that the /A might mean Academic but it seems this same part number applies to the non-academic version:
MA338Z/A
Thanks

What happens with cloud and non-cloud macs?

Have upgraded to OSX 7 on a imac and IOS5 on iphone but have an older mac book that is not eligible to upgrade. What will happen to the mac book and email?

Unforunately, the MacBook won't be able to sync mail with the iMac and iOS devices.

I have installed creative cloud and a trial version of illustrator on my laptop since then my IT department has purchase illustrator but is having problems installing it onto a PC workstation.

I have installed creative cloud and a trial version of illustrator on my laptop since then my IT department has purchase illustrator but is having problems installing it onto a PC workstation.

Hi, the problem is that my IT department was sent a link on his laptop to install Illustrator, however the request was for them to build me a workstation and install it on there. they have built the workstation and is having problem installing the CC desktop app on there, just to clarify would you be able to answer the following:
1) Do you have to have CC desktop app to install Illustrator from the given link?
2) If you have signed up & installed CC on your laptop, can you install illustrator on a workstation by simply installing the CC desktop app on the workstation, log into that with your username & activate the link to install illustrator, basically the provided link should not be specific to a computer or user?
Thanks

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program?

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.

iWeb cannot import published files so you would need rebuild the site.
Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.

How do you toggle a microphone directly between enhanced and non-enhanced?

Apparently mixing calls between Microphone.getMicrophone() and Microphone.getEnhancedMicrophone() on the same device doesn't work very well. Take the following code:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" creationComplete="onCreationComplete()" click="Microphone.getMicrophone().setLoopBack(true);">
    <fx:Script>
        <![CDATA[
            import mx.controls.Alert;
            private function onCreationComplete():void
                Microphone.getEnhancedMicrophone().setLoopBack(true);
        ]]>
    </fx:Script>
</s:Application>
You will be able to hear yourself speak at first, but as soon as you click the app, you will no longer be able to hear your voice. I have also seen this sort of thing in other scenarios.
To make a long story short, if you call getEnhancedMicrophone() for one device, then try to call getMicrophone() for that same device, the device will stop providing any audio input. The same is true vice versa. However if you call getEnhancedMicrophone() for one device, then getMicrophone() for a different device, then come back to the first and call getMicrophone() for it, the device will work just fine.
Why? Is there any way to just toggle between enhanced and non-enhanced settings for the same device, without reaching out to an unrelated device? Thanks!

On your Microphone reference you have these constants you can set your options to:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/MicrophoneE nhancedMode.html
As you can see there, MicrophoneEnhancedMode.OFF disables enhanced mode. You would set your Microphone references .mode property to equal that to disable enhanced, or use one of the other relevant options to enable it. Thus, you should always use enhanced so you can toggle it.

Differnce between unicode and non unicode

Hi every body i want to differnce between unicode and non unicode and for what purposes this ulities are used explain me little brief what is t code for that , how to checj version, how to convert uni to non uni ?
Advance Thanks
Vishnuprasad.G

Hello Vishnu,
before Release 6.10, SAP software only used codes where every character is displayed by one byte, therefore character sets like these are also called single-byte codepages. However, every one of these character sets is only suitable for a limited number of languages.
Problems arise if you try to work with texts written in different incompatible character sets in one central system. If, for example, a system only has a West European character set, other characters cannot be correctly processed.
As of 6.10, to resolve these issues, SAP has introduced Unicode. Each character is generally mapped using 2 bytes and this offers a maximum of 65 536 bit combinations.
Thus, a Unicode-compatible ABAP program is one where all Unicode checks are in effect. Such programs return the same results in UC systems as in non-UC systems. To perform the relevant syntax checks, you must activate the "UC checks" flag in the screens of the program and class attributes.
With TC: /nUCCHECH you can check a program set for a syntax errors in UC environment.
Bye,
Peter

Cannot convert between unicode and non-unicode string datatypes

My source is having 3 fields :
ItemCode nvarchar(50)
DivisionCode nvarchar(50)
Salesplan (float)
My destination is :
ItemCode nvarchar(50)
DivisionCode nvarchar(50)
Salesplan (float)
But still I am getting this error :
Column ItemCode cannot convert between unicode and non-unicode string datatypes.
As I am new to SSIS , please show me step by step.
Thanks In Advance.

My source is having 3 fields :
ItemCode nvarchar(50)
DivisionCode nvarchar(50)
Salesplan (float)
My destination is :
ItemCode nvarchar(50)
DivisionCode nvarchar(50)
Salesplan (float)
But still I am getting this error :
Column ItemCode cannot convert between unicode and non-unicode string datatypes.
As I am new to SSIS , please show me step by step.
Thanks In Advance.
HI Subu ,
there is some information gap , what is your source ? are there any transformation in between ?
If its SQL server source and destination and the datatype is as you have mentioned I dont think you should be getting such errors ... to be sure check advance properties of your source and check metada of your source columns
just check simple oledb source as
SELECT TOP 1 ItemCode = cast('111' as nvarchar(50)),DivisionCode = cast('222' AS nvarchar(50)), Salesplan = cast(3.3 As float) FROM sys.sysobjects
and destination as you mentioned ... it should work ...
somewher in your package the source columns metadata is not right .. and you need to convert it or fix the source.
Hope that helps
-- Kunal
Hope that helps ... Kunal

About integration between SAP and non-SAP applications via javaidoc classes

Hi,All
Now we are implementing a SAP-Retail project,we encounter a problem of integration between SAP and non-SAP applications(POS),we want to set Inbound/Outbound between SAP and POS applications realtimely,POS can connect to the SAP system via VPN,weather it can be implemented?
I conceive to implement it with SAP Java Connector IDoc Class,I don't know weather it is the best solution?If not,please give some other proposal.
I have download the classes from SAP website and try it with the samples provided by SAP(JCoIDocSample1.java/JCoIDocSample3.java),In my testing,Inbound is succeed,but,in SAP-Retail IS,standard Outbound message type is defined via file port,some one told me that SAP Java Connector IDoc Class can only receive idocs from tRFC port?is it true?If not,please tell me how to deploy in SAP so java program can receive idocs from file port?

We too are interested in finding information on integration between SAP and Intergraph. Were you able to obtain information and I was wondering if could share this with us.
Thanks,
Sue
City of Edmonton

Dynamic switching between stacked and non-stacked detail groups?

Hi guys,
Is it possible to dynamically switch off/on stacking of detail groups?
I would like to give the user the option to switch between stacked and non stacked
Regards
Bar
JDev: 10.1.3.2
JHS: 10.1.2.26

Yes and No. No because it is not supported out-of-the-box by JHeadstart, yes because you can do this post-generation and then move the custom code to JHeadstart templates.
However, it is not a trivial thing to build, you can try the JDeveloepr forum for any help, we can help you with moving the post-generation code to custom templates, since that is the JHeadstart-related part of your question.
Steven Davelaar,
JHeadstart Team.

Intel and non Intel versions of Applications.

In upgading to Snow Leopard, I became conscious of many of the programs having an Intel and non Intel version. Such as "Dashboard" and "Dashboard-Intel". If I trash the non-intel version: will the programs work correctly? It would save a lot of disk space....
Thanks
asuch

Which Application folder? There is the root-level one, which you see when you double-click on your boot volume icon and one for each user, if you've ever selected to install only for that user. If the former, give some examples, since I only see one of each application displayed there. If the latter, all of user's Application folders are nonexistent.

SSIS Package : While Extracting Sharepoint Lookup column, getting error 'Cannnot convert between unicode and non-unicode string data types'

Hello,
I am working on one project and there is need to extract Sharepoint list data and import them to SQL Server table. I have few lookup columns in the list.
Steps in my Data Flow :
Sharepoint List Source
Derived Column
its formula : SUBSTRING([BusinessUnit],FINDSTRING([BusinessUnit],"#",1)+1,LEN([BusinessUnit])-FINDSTRING([BusinessUnit],"#",1))
Data Conversion
OLE DB Destination
But I am getting the error of not converting between unicode and non-unicode string data types.
I am not sure what I am missing here.
In Data Conversion, what should be the Data Type for the Look up column?
Please suggest here.
Thank you,
Mittal.

You have a data conversion transformation. Now, in the destination are you assigning the results of the derived column transformation or the data conversion transformation. To avoid this error you need use the data conversion output.
You can eliminate the need for the data conversion with the following in the derived column (creating a new column):
(DT_STR,100,1252)(SUBSTRING([BusinessUnit],FINDSTRING([BusinessUnit],"#",1)+1,LEN([BusinessUnit])-FINDSTRING([BusinessUnit],"#",1)))
The 100 is the length and 1252 is the code page (I almost always use 1252) for interpreting the string.
Russel Loski, MCT, MCSE Data Platform/Business Intelligence. Twitter: @sqlmovers; blog: www.sqlmovers.com

Column "A" cannot convert between unicode and non-unicode string data types

I am following the SSIS overview video-
https://secure.cbtnuggets.com/it-training-videos/series/microsoft-sql-server-2008-business-development/6143?autostart=true
I have a flat file that i want to import the contents onto a SQL database.
I created a Dataflow task, source file and oledb destination.
I am getting the folliwung error -
"column "A" cannot convert between unicode and non-unicode string data types"
in the origin file the data type is coming as string[DT_STR] and in the destination object it is coming as "Unicode string [DT_WSTR]"
I used a data conversion object in between, dosent works very well
Please help what to do

I see this often.
Right Click on FlatFileSource --> Show Advanced Editor --> 'Input and Output Properties' tab --> Expand 'Flat File Source Output' --> Expand 'Output Columns' --> Select your field and set the datatype to DT_WSTR.
Let me know if you still have issues.
Thank You,
Jay

Column cannot convert between unicode and non-unicode string data types

I am converting SSIS jobs from SQL Server 2005 running on a Windows 2003 server to 2008R2 running on a Windows 2008 server.  I have a dataflow with an OLE DB Source which is selecting from an Oracle view.  This of course worked fine in
2005.   This OLE DB Source will not even read the data from Oracle without the error "Column "UWI" cannot convert between unicode and non-unicode. The select is:
SELECT SOME_VIEW.UWI AS UWI,
CAST(SOME_VIEW.OIL_NET AS NUMERIC(9,8)) AS OIL_NET
FROM SOME_SCHEMA.SOME_VIEW
WHERE OIL_NET IS NOT NULL AND UWI IS NOT NULL
ORDER BY UWI
When I do "Show Advanced Editor" on this component, in the Input and Output Properties, I show the OLE DB External Column as DT_STR length 40 for the UWI column and for the Output Columns I see the UWI as the same DT_STR.
How can I get past this? I have tried doing a cast...cast(SOME_VIEW.UWI AS VARCHAR(40)) AS UWI and this gives the same error. The column in Oracle is a varchar2(40).
Any help is greatly appreciated. Thanks.

Please check the data type for UWI using advanced editor for Oledb Source under
external columns and output columns. Are the data types same?
If not, try changing the data type (underoutput columns) same as data type shown under
external columns
Nitesh Rai- Please mark the post as answered if it answers your question

Cannot convert between unicode and non-unicode string data types.

I'm trying to copy the data from 21 tables in a SQL 2005 database to a MS Access database using SSIS. Before converting the SQL database from 2000 to 2005 we had this process set up as a DTS package that ran every month for years with no problem. The only way I can get it to work now is to delete all of the tables from the Access DB and have SSIS create new tables each time. But when I try to create an SSIS package using the SSIS Import and Export Wizard to copy the SQL 2005 data to the same tables that SSIS itself created in Access I get the "cannot convert between unicode and non-unicode string data types" error message. The first few columns I hit this problem on were created by SSIS as the Memo datatype in Access and when I changed them to Text in Access they started to work. The column I'm stuck on now is defined as Text in the SQL 2005 DB and in Access, but it still gives me the "cannot convert" error.

I was getting same error while tranfering data from SQL 2005 to Excel , but using following method i was able to tranfer data. Hopefully it may also help you.
1) Using Data Conversion transformation
data types you need to select is DT_WSTR (unicode in terms of SQL: 2005)
2) derived coloumn transformation
expression you need to use is :
(DT_WSTR, 20) (note : 20 can be replace by your character size)
Note:
Above teo method create replica of your esting coloumn (default name will be copy of <coloumn name>).
while mapping data do not map actual coloumn to the destination but select the coloumn that were created by any of above data transformer (replicated coloumn).

Compatability between cloud and non-cloud versions

Similar Messages

Maybe you are looking for