Compatability of optical drive, PowerMac to Mac Pro

I have a PowerMac G5 that I am no longer using. I now use a Mac Pro, I think it's 1.1. Would the SuperDrive from the Mac Pro work in my PowerMac? If so, how do I remove it? (I know how to put it into the PowerMac)

Hi,
G5s used IDE/ATAPI opticals, Mac Pros use SATA Opticals.
Might work with the right adapter...
http://www.walmart.com/ip/28879969?wmlspartner=wlpa&adid=22222222227019472865&wl 0=&wl1=g&wl2=c&wl3=55380887409&wl4=&wl5=pla&wl6=87884735889&veh=sem
http://www.newegg.com/Product/Product.aspx?Item=N82E16812232004
Optical drive removal/install on G5..
http://eshop.macsales.com/installvideos/powermac_g5_opt/
Mac Pro Optical drives...
http://eshop.macsales.com/MyOWC/Upgrades.cfm?model=249&type=Internal%20Optical%2 0Drives&sort=pop

Similar Messages

4 Questions re installing a second Optical Drive in a Mac Pro (Harpertown)

For years I have owned and used a Sony DRX-810UL-T optical drive as an external unit with my Mac Pro "Harpertown" purchased on February 19, 2009. It was connected to the computer using the firewire cable and it worked correctly.
Some Background
Today it dawned on me I had an empty optical drive bay in the Mac Pro so I should move the Sony drive in there and eliminate a bit of the clutter on my computer desk. I read the section on installing optical drives in the little Apple manual that came with my computer but it only discussed a single drive installation.
Checked on line and found several sources describing how to do this and a couple of YouTube videos also showing how to do this. (Oddly only one of the videos mentioned the need for plugging in the power cable).
I made sure I plugged the cables into the proper units as both had helpful legends on them indicating which was for the top drive and which was for the bottom drive.
After installation I powered up and found neither drive would appear.
Checked the About this Mac item in the Apple menu and got confirmation that the system didn't see any drives. Opened the computer again and unplugged the Sony's power and data cables then closed the computer and fired up again.
The original Super Drive again appeared and worked correctly.
The Questions:
1. Since the Super drive came with the Mac Pro and was in the top space can I assume it needed to stay there and not get moved to the lower space?
2. Since the Sony DRX-810UL-T has the correct connectors does this indicate this drive can be used with the Harpertown Mac Pro?
3. If it can, did I miss setting some jumpers? I noticed both drives have one jumper in place but each appears to be in a slightly different spot than the other.
4. Since the Sony drive worked correctly with my current OS (10.6.6) using the firewire cable can I assume it does not need a firmware update to be used internally.
Wrap up
Since the original Super Drive is working properly I am sure I did no damage to it or the computer. It would be nice to be able to get the Sony DVD drive to work internally, however.
Thanks, in advance, to anyone who can offer some help with this situation.

hatter,
Thank you for this added information. Here's the current status of things.
Just to check that the Sony drive would work internally I disconnected the superdrive (ata cable and power cable) and made the Sony drive the only drive plugging it in as if it was the top drive. The jumper for it was set to cable select.
The Profiler found it and listed is in both the ATA section and the disc burner section.
I checked the jumper on the superdrive to be sure it was also set for cable select and plugged both drives back in using the top connections for the super drive and bottom connections for the Sony,
Again only the SuperDrive appears in the ATA list and and the disc burner list.
I am beginning to wonder it the problem may actually be with the ribbon cable that snakes back to the motherboard.
Since that cable has a set of dual outlets at the drive end and has them labeled for top and bottom, is it possible to plug in only one drive using the bottom connector as a test to see if data flows to the motherboard?
Is it possible some part of that cable has somehow become disconnected at the motherboard?

How do I rename the 2 optical drives in a mac pro

On the Mac Pro (OSX 10.6.8), using Toast to copy a CD, I often find that the "read" phase assumes I am going to "write" to a disc in the same Superdrive, even though there are two of them. The superdrives both have identical names, so selecting the drive is guesswork.
I've tried quite a few searches on both the Apple forums & Google, to find out if it's possible to rename these two drives (ie, in the same way that Windows allocates a drive letter to each).

Nope.
Once upon a time when ATA busses offered Master and Slave settings you could set one as Master, and Toast would automatically show that as the first optical drive on the list. It all went away once they went to cable select settings on the ATA.
I had/have the SAME issue and it got so thoroughly frustrating that I pulled one of the super-drives, (Pioneer DVR-112) installed it in an external case and stuffed a used $5 DVD-rom drive from Goodwill in the second slot.
(Actually, given how hard it is to find ATA DVD burners, you could do a lot worse than to put one aside for limited use. I'd give anything to get another DVR-112.)

Adding a solid state hard drive to a Mac Pro 3,1

I have two hard drives in my Mac Pro 3,1. I want to add a solid state hard drive and upgrade Yosemite to it. I will eventually use my existing drive as extra storage. Does anyone know if this model of Mac Pro can support SSD drive? Also, can I mix and match normal hard drives with SSD drives? I know I will also need an adapter since SSD's are 2.5 inch. The one I am thinking about getting is the Kingston SSDNow V300 Series SV300S37A/240G 2.5" 240GB SATA III Internal Solid State Drive (SSD). Any feedback that can confirm or deny compatibility would be appreciated.
Thanks,

I have Mac Pro (4.1 2009 model) and I have Samsung SSD 840 EVO 500GB. There is an issue you you want to run Yosemite. That drive requires that TRIM is enabled otherwise the perforamnce goes down. There is a Trim Enabler that you can get but but default Yosemite rejects it and disables it so you end up with a driver with TRIM not eanbled. There is a hack that allows you to get it working again but it has some security implications.
Just be aware of it.
Tom

Replacement CD/DVD Drive for 2008 Mac Pro?

I need to purchase a new optical drive for my 2008 Mac Pro 2.8 GHz Quad-Core desktop computer. I checked OWC, but they're out of stock. I currently have a Samsung SH-S222L, which I absolutely hate–mainly because the heads access the drive every 5 minutes or so. Very, very annoying.
Any help or advice is greatly appreciated.

Psst ! Here's a little tip for you. The drive used in Mac Pro's isn't exclusive to the mac. It's an Optiarc model
and I believe you can use any cd/dvd burning drive with an ATAPI plug on the back, Pc or Mac, and chances are it'll work fine, I used a Lite-On drive I snagged from a dying PC in my Mac pro 3,1 as my 2nd dvd drive
and it worked fine for a few years. Replacing it isn't that hard either. There are guides on Youtube or other places that show you how to do it. Just remember to remove the little lip on the front of the dvd drawer before you install it. I don't know about specific brands, but Pioneer seems fine, and I'm sure there are others that are fine, too. macsales might help you out. I know what it's like having to haul your Mac pro into your local Mac place--a pain in the butt, right? and then you have to wait...and wait...
I think you can can do this....
good luck
John B

What is the best blue-ray drive for my Mac Pro????

What is the best blue-ray drive for my Mac Pro????
I wanted a BWU-200S but it says windows only i called apple
and all they could tell me was logitech....wouldn't tell me a model
or anything.
I would really like one that does all the formats and feature that the
Sony BWU-200S does.
I read that the BWU-200S might work in the mac pro it just only comes with
windows software. If anyone has tried this let me know please i need this soon.

This site makes Mac compatible Blueray drives:
http://store.fastmac.com/index.php?cPath=10252
The questions to ask them is:
1. Which applications can be used to burn bluray movies from it?
2. Which applications can be used to playback commercial bluray from it?
3. Does it let you burn DVDs from iDVD, iTunes and the Finder as well as CDs and CD-RWs?
4. Does it support both DVD-R DL and DVD+R DL for burning and playback?
5. Does it allow for booting from the system installer that shipped with the machine and running the hardware test that shipped with the machine?
6. Do you get to keep the original optical drive in case you want to troubleshoot if system issues are due to their drive?
Some of these may already be on the website, I just haven't taken the time to look it completely over.
Message was edited by: a brody

Can I move hard drives from one Mac Pro to another?

I have two mid-2010 Mac Pros that I work with daily - one 8-core on 10.7.3 and one 12-core on 12.7.4. I would like to take all of the drives out of one Mac Pro and put them in the other and vice versa, essentially trading their content. It probably sounds pointless, but I would like to build the more powerful one out from scratch, and right now the less powerful one is nearly empty.
Can I simply shut off both machines and swap all of the drives in one for all of the drives in the other? I would keep them in the same bays in the machine I'm trading them with, but I'm unsure if I will screw something else up.

rfairley wrote:
...Can I simply shut off both machines and swap all of the drives in one for all of the drives in the other? I would keep them in the same bays in the machine I'm trading them with, but I'm unsure if I will screw something else up.
I've moved drives from a Mac Pro 1,1 to a 5,1 and they were able to boot the newer Mac, but to ensure that the OS was configured for the newer machine, I ran the appropriate combo updater once the drive was installed. If you're planning to stick with the drive rotation, doing that shouldn't hurt and might help even though the machines are of the same vintage. Note, however, that some commercial software keys in on machine specifics and/or the serial number to prevent piracy, so swapping drives can cause other problems.

New hard drive in a Mac Pro - my experience.

After taking delivery of my MacPro I was keen to add an extra hard drive to use in conjunction with amateur level video editing and photo imaging software.
At first I bought a 3.0 Gb/s, 320 GB Seagate 7200.10. and it worked Ok but did not seem any faster than the OEM drive (250 GB Western Digital SE) . XBench confirmed that it was in fact 20% slower overall.
I then consulted this forum and read the many posts re the Seagate firmware problem and other suggestions for suitable hard drives. To be honest it was all great stuff but, for me, a little overwhelming. So today, back went the Seagate in exchange for a 3.0 Gb/s, 250 GB, Maxtor Diamond Max 10 which was all I could afford. I installed the drive, what a dream the MacPro is, partioned it and ran XBench. The Maxtor is 2.5 to 3 times faster than the Seagate and is a quiet drive.
So if you, like me, want a single, affordable fast and quiet drive, the Maxtor does the job. I am sure other drives are just as good if not better but if you find the research confusing, the Maxtor seems to be a safe choice.
Also, congratulations for reading this forum before making a purchase - it saves you the 20% restocking fee for returns!

I want to install another hard drive in my Mac Pro. Just looking for something in the 250GB or smaller range - Western Dig. Maxtor, etc.
I see plenty of SATA 3Gbs drives - what do I look for in terms of specs. The dimensions are listed in the Mac Pro booklet, however, what type of connector is needed or not needed - seems no cables are needed... how many pins, etc.????
Appreciate any help.

Can I use my old mac mini (G4) as an optical drive with new mac mini late 2014?

Can I use my old mac mini (G4 Tiger) as an optical drive with new mac mini, late 2014?

I think so
DVD or CD sharing: Using Remote Disc - Apple Support
You should also be able to connect the two via FireWire using a FW 400 cable plugged into the old Mini, thne a FR 400 femial to FW 880 adopter plugging into a FW to Thunderbolt adopter
How to use and troubleshoot FireWire target disk mode - Apple Support

HT1338 I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.

Hi,
I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.

Typically this is caused by the internal list of compatible devices in the Mac being out of date. All you should need to do is disconnect the printer from the Mac, run Apple Software Update (even if there are no updates, the list will still update), restart the Mac, connect the printer to the Mac, and add the print queue. If that doesn't work, let me know.
I am a printer tech for HP.

I can not save any data to external hard drive from my mac pro. Is there anyone can help me in this regard?( note, when i first plug my ext. drive to mac i chose option to backup later)

I can not save any data to external hard drive from my mac pro. Is there anyone can help me in this regard?( note, when i first plug my ext. drive to mac i chose option to backup later)

The device may be formatted for Windows, as NTFS. The format is readable, but not natively writable on a Mac. To write to the device, you must either reformat it (erasing all the contents) or install third-party software to enable write access to NTFS.

I need to buy some new hard drives for my Mac Pro

I had an extra internal hard drive in my Mac Pro, a Seagate one, that suddenly stopped working and I needed to send it to a data recovery company, so...
Now I'd like to
- Install a new internal HD
- Install a NAS with two/three disks. (Hitachi if possible, as I have read are the ones that last longer, more reliable than WD and by far more than Seagate).
But to do that I'd like to know how to find out the right type of disks for my computer.
I'd be very gratefull if anyone would tell me where to look it up.
Thank you in advance
In case any of you can help with this, these are the details of my Mac Pro
thanks again
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Mac OS X Lion 10.7.5 (11G63b)
2 x 2.66 GHz Dual-Core Intel Xeon
Memory 7GB 667 MHz DDR2 FB-DIMM
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          7 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          Not Available
Hardware UUID:          00000000-0000-1000-8000-0017F20F9F40
+++++++++++++++++++++++++++++++++++++++++++++++++++++
The only HD now
Intel ESB2 AHCI:
Vendor:          Intel
Product:          ESB2 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.10 Supported
ST3250824AS P:
Capacity:          250,06 GB (250.059.350.016 bytes)
Model:          ST3250824AS P
Revision:          3.BQK
Serial Number:                      9ND1P4X7
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Bay 1
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk0s1:
Capacity:          209,7 MB (209.715.200 bytes)
BSD Name:          disk0s1
Content:          EFI
HD INTERNO PRINCIPAL:
Capacity:          249,2 GB (249.199.591.424 bytes)
Available:          37,91 GB (37.914.918.912 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
Content:          Apple_HFS
Recovery HD:
Capacity:          650 MB (650.002.432 bytes)
BSD Name:          disk0s3
Content:          Apple_Boot

NAS is of course external and depends on how you access it. And then t he ideal for RAID5 for instance woudl be WD RED series, but those do not work inside Mac tower.
Look up "TLER" regarding WD drives and RAID.
Apple does not endorse or anything, not in decades and when there were problems - G5 and early adoption of SATA and changing standards and features, it was users that did the troubleshooting.
So unles you are using Apple's PRO RAID card, which I don't think anyone would or should and which is limited to 2TB drives and only instance of a ceiling on supported drives (it is req'd for SAS though), use your own research.

I have a Mac pro(1 free bay) and a mac mini I need to back both of them Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010) What option has the faster GB/s?

I have a Mac pro(1 free bay) and a mac mini I need to back up both of them (time machine) Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010)
What option has the faster GB/s?

Disk drive using native SATA bus interface will allow the drive to copy and always present and ready.
But once you have backup any hourly changes should be smaller and as long as the NAS and your switch should allow enough.
You should always have off line backups and don't rely on just one backup set or just TimeMachine.
WD RED models are designed for RAID and NAS and 7.2k instead of your more standard slower green 5400 rpm green models while still costing less than WD Blacks.
http://www.amazon.com/gp/product/B008JJLW4M/
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
Clone to internal, TimeMachine to NAS is one way to go at it.

How to reinstall a hard drive on a mac pro that was accidentally dragged out of Finder

How to reinstall a hard drive on a mac pro that was accidentally dragged out of Finder? I have files on this drive that I don't want to loose or corrupt.

If you mean you dragged the hard drive shortcut out of the sidebar of a Finder window, you're quite all right - that's just a shortcut and you haven't lost any files. You can get it back by going to Finder preferences (the Finder menu, then Preferences), click Sidebar, and tick the "hard drives" box fully to show all hard drives.
Post back if you did something different though.
Matt

Using the optical drive of a MacBook Pro from new iMac for iTunes

Can I connect my macbook pro to my new iMac (no optical drive) with ethernet cable and use the optical drive of the macbook pro to upload CDs to iTunes on the new iMac?

On my 17" MacBook Pro I use the eSata port for Black X Duet Hard Drive Docking station where I put 2 1TB Hitachi internal drives. They are swappable and are about $80.00US. I use the USB port for my system backup and a G-force 500 MB bus powered portable drive on the FW800 port just for the heck of it. It works out really well for me.

Compatability of optical drive, PowerMac to Mac Pro

Similar Messages

Maybe you are looking for