Compatability of running composite application built using CAF

Hi all,
I want to know one basic question about using CAF tool.
Suppose if I use CAF of Netweaver 2004s (Netweaver AS 7.00) to build a composite application, is it possible to deploy the solution to the customer who is having Netweaver AS 620 or 630?
Appreciate your help. Thanks in advance
Regards
Guru

Hi Gurunathan,
That's not really possible. You need to deploy the solution to the same J2EE engine version as NWDS where you built your composite application.
Even SP level must be the same. I recently met the problem that a composite application was built under NWDS 7.0 SP8 and even deployment to 7.0 SP7 J2EE engine was failed because of versions incompatibility!
CAF, J2EE engine and NWDS versions must be the same, it's very important for consistency.
Best regards,
Aliaksei

Similar Messages

  • Hi, We have an application  built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1. When we try to download a file(.pvw file) in that application safari throws "Download failed" error. Please suggest what needs to be done.

    Hi,
    We have an application  built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1.
    When a file url is clicked instead of asking for Save or Open or Cancel options, the file gets opened on IPad by default.
    Is this default behaviour which cannot be changed or can it be configured to ask user preference?
    When we try to download a file(.pvw file -> a model file) in the above application, safari throws "Download failed" error.
    Please suggest what needs to be done.
    Regards,
    Pramod

    Safari on an iPad in general does not allow downloading of files. That's a safety precaution in the iOS SDK to keep unauthorized content off of iOS devices. Safari will open from the web site file types that it can handle, but direct downloading isn't normal behavior, and I don't believe the behavior can be changed, though you can try asking in the developer forum, either here or the one to which you have access as a member of Apple's iOS developer program.
    Regards.

  • Sample applications built using Oracle developer 6.0

    Please tell me how can if find sample applications built using oracle developer.
    Is there any web site on the offering such a service ?

    Ali,
    Try www.oraclefans.com/oraclefans/
    Louis D.

  • Running Composite application using Portal Ivirw

    Hi Experts,
    I'm new to composite applications and we are practing some sample application in CAF. Now we are having lot of doubts/qustions in our mind while working on these application, here i'm posting few of those questions 'Can we create an iview in portal for Compossite application? How can we integrate portal and composite apps as together? Where can i find any document regarding this topic?'.
    Could you please clarify me these doubts.
    Thank in advance,
    Sandeep Bonam

    Hi,
    We can create Iviews in portal for composite applications and we can integrate Comp app and portal.
    Go through [this |http://help.sap.com/saphelp_nwce10/helpdata/en/df/bedca2076511d7b84500047582c9f7/content.htm]help doc.
    Sampath

  • Is it a possible to run Java application built by JBuilder other than it?

    Dear All,
    I am expecting the quick response from you people.
    We have built our EJB application completely using JBuilder 9.
    Due to some license problem, there is a delay getting JBuilder original version .
    We dont want to waste our time to wait for JBuilder.
    So, is it possible to run our EJB application other than JBuilder???
    I tried to build the application thru Weblogic8.1, but failed to do so.
    Awaiting for your immediate response,
    Thank you,
    regards
    mani

    Hi,
    I've written build.xml for our application and tried to run thru Ant tool. Unfortunately, it is failed to compile, since there is some mismatch version it seems.
    It has thrown some compile time errors as below:
      [javac] C:\AMS1.7b\AMSWEB\AMSWEB\src\com\tf\AMS\xml\TTXmlWriter.java:574: cannot resolve symbol
      [javac] symbol  : method addChild (org.jdom.Element)
      [javac] location: class org.jdom.Element
      [javac]       udfRoot.addChild(secRoot);
      [javac]              ^
      [javac] C:\AMS1.7b\AMSWEB\AMSWEB\src\com\tf\AMS\xml\TTXmlWriter.java:1580: cannot resolve symbol
      [javac] symbol  : constructor XMLOutputter (java.lang.String,boolean)
      [javac] location: class org.jdom.output.XMLOutputter
      [javac]           XMLOutputter serializer = new XMLOutputter(" ", true);There is a latest Xerces.jar file under the jars directory, but it is unable to digest these methods! :-(
    When i tried to build the application thru Eclipse, it has thrown the following error:
    Buildfile: C:\AMS1.7b\build.xml
    clean:
       [delete] Deleting directory C:\AMS1.7b\AMSWEB\AMSWEB\build
    compile:
        [mkdir] Created dir: C:\AMS1.7b\AMSWEB\AMSWEB\build\classes
        [javac] Compiling 514 source files to C:\AMS1.7b\AMSWEB\AMSWEB\build\classes
        [javac] C:\AMS1.7b\AMSWEB\AMSWEB\src\com\tf\AMS\beans\A_Address_bean.java:3: cannot access java.io.Serializable
        [javac] bad class file: C:\Program Files\Java\jre1.5.0_06\lib\rt.jar(java/io/Serializable.class)
        [javac] class file has wrong version 49.0, should be 48.0
        [javac] Please remove or make sure it appears in the correct subdirectory of the classpath.
        [javac] import java.io.Serializable;
        [javac]                ^
        [javac] 1 error:-( :-(

  • How to run composite application

    Dear all,
    I developed one composite application in ce 7.1 ehp 1 version.I deployed that application.can any one let me know how to run that
    application.
    regards
    ravi

    Hi Ravi,
    Take a look at the following links:
    - [Quick Start tutorial|http://help.sap.com/saphelp_nwce10/helpdata/en/45/055d394c09048ae10000000a155369/frameset.htm]
    - [Modeling Composite Views with Visual Composer |http://help.sap.com/saphelp_nwce10/helpdata/en/45/04134e8a5741dee10000000a1553f6/content.htm]
    - [SAP NetWeaver Visual Composer FAQ|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00b9ba6d-1291-2a10-208d-bd27544e7939]
    I think the "Quick Start tutorial" -> "Creating the Basic Model" -> section 13 can answer your question.
    Regards,
    Udi
    Edited by: Udi Cohen on Aug 19, 2009 10:14 AM

  • Integrating SWF built using SDK 4.1 into application built using SDK 4.5

    Did anyone integrate SWF built using Flex sdk 4.1 into SWF built using Flex SDK 4.5 using SWFLoader?
    I am facing some issues while doing so. Can someone please point me to the right direction.

    See past threads or my blog about the ”Marshall Plan”
    Alex Harui
    Flex SDK Team
    Adobe Systems, Inc.
    http://blogs.adobe.com/aharui

  • Commerical adobe air application built using Robohelp - thoughts on software protection

    Hello Forum,
    I am in the process of building a commerical software application - a niche business methodology (processes, tools, templates) - and for which I naturally want to apply *some* level of protection against unauthorized copying.  The two main requirements I have are:
    1. That the software package itself cannot be installed any number of times on any number of machines (as is currently the case with the adobe air output for distribution).
    2. That large chunks of the content cannot be copied and pasted
    Here is where my thoughts are so far:
    1. There are a number of third party providers in this space.  The ones i have idenftifed so far are: LimeLM, NitroLM, Excel Software's AirLicense and Zarqon.  There is also something called Sharify out there but from the site and lack of developer response I think this is now dormant.  All of these provide a means of locking down one license to one device but that can be transferred if the user loses and changes their device. Has anyone had any experience of these or other solution providers?
    2. As I understand it there is html code that can be added to disable copy and paste.  Does anyone know what this is? Does anyone know how to apply it?
    Finally: we are a small start up without in-house technical skills.  This was a major reason we chose RoboHelp as a solution - it meant that the software could be build by us, the subject matter experts who were creating the content. Does anyone know of a good place to crowd-source the technical skill set required to apply both the solutions to 1 and 2 described above?
    We are using RoboHelp 9 with Adobe Air desktop application output.
    Thanks in advance for any constructive comments - and best wishes to you and yours for 2013!
    Felix

    Perhaps it's time to take stock of the requirement, what has been established and your options given where you are.
    Requirements
    You want protection against multiple installs.
    You don't want users to be able to copy and paste the content.
    Established
    Neither of those are built in to AIR Help.
    To build them in you would have to create your own AIR application as the RoboHelp code for creating the AIR installer is locked down. Confirmed by Scott Prentice on HATT.
    You do not have an house AIR developer.
    Options
    Tackling Requirement 1 is going to require a developer to replicate what Adobe have done and add the extra requirement that the installer can only run once.
    Given the hours that Adobe put into this and with the resources at their disposal, I have to question the commercial viability of that.
    A customer could legitimately need to reinstall, for instance in the case of a hard drive failure.
    Perhaps my earlier suggestion of finding someone who can wrap up the AIR file in something that deletes it after installation, thereby preventing a second installation, would be viable. You would need to investigate that and do it in a way the customer can get a fresh download where a further installation is legitimate.
    Otherwise I think you need to be looking at a very different approach. Your problem is the same one that Adobe face. You will recall that when you installed RoboHelp you had to activate it. That authorises the use of RoboHelp on a specific machine. The licence authorises installation on a second machine and that has to be activated too. Attempt a third activation and you will get a polite refusal until you deactivate an earlier installation. What you need is a commercial organisation to supply your product in a similar way. The trouble there is your product is not an application in the same way as RoboHelp.
    You could use the WebHelp output and apply password protection to your site but again you are going to require development skills. Even then, you are relying on your customers not to reveal the password and that sounds like a No No as you don't trust them not to copy and paste the information.
    Copy and paste is difficult to prevent. There are tools for web sites that would likely work in webhelp but you also have to prevent screenshots being permitted. Ultimately, going to state secret espionage levels, how do you prevent someone taking a photo of the screen? It's more about making it difficult to do casually rather than making it impossible. A high brick wall around your house makes entry difficult and deters most from attempting entry, it does not make it impossible.
    I am sorry this is all negative but the root problem is your approach was wrong given these requirements. Unless someone else has other ideas, I think you need some commercial consultancy for information on how to get this idea off the ground and that is way beyond what this forum offers. Perhaps you could approach Scott Prentice at http://www.leximation.com for such assistance but I think it would be on a fee paying basis. Scott is a very knowledgeable person in many areas and he is very approachable.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Need to Import an application built using Oracle Service Bus on Oracle Public Cloud

    I have built an application using Oracle Service Bus (OSB) eclipsed IDE which transfers file from server1 to server2, reads the transferred file, transforms it into a payload and calls a webservice. I have tested this application locally by installing Oracle Service Bus on one on my servers.
    I have java as a service account on Oracle Public Cloud. I would like to import the above application onto Oracle Public Cloud. I am not sure if the Weblogic domain on Oracle Public Cloud has enabled OSB or not.
    Let me know if someone can help me.

    Hello,
    Oracle Service Bus is currently not supported in Oracle Java Cloud Service.
    Oracle Java Cloud Service supports deployment of JavaEE and ADF applications.
    -- Nilesh

  • Blog or Wiki applications built using APEX

    I have been tasked with finding a ready-made solution that we can use as a developers' scrapbook where development team members can store useful hints/tips, code samples, coding standards etc etc
    An APEX solution would be best (something similar to Carl Backstrom's APEX demo app, maybe) since it's familiar territory and it would keep the sys admins happy - but I'm open to other solutions.
    A non-APEX solution would have to be Windows based, with no server-side requirements.
    I quite like TiddlyWiki (http://www.tiddlywiki.com) but it's not multi-user. There is a 'groupauthoring' plugin for it (http://tiddlywiki.bidix.info/) but it requires use of Ruby scripts on the server.
    Online blogs like blogspot would be great, but The Business wants to keep everything in-house.
    So, has anyone built a blog or wiki-type application using APEX that they would be willing to release 'into the wild'? Or is there another solution that I've missed ...
    Cheers
    Richard

    Hello,
    Here is an example of the beginnings of the wiki application, to edit add a subject just login it uses open credentials,
    http://apex.oracle.com/pls/otn/f?p=2757:709
    the code as it stands here can be downloaded here (it differs slightly from the demo version as i've actually done some dev work on it)
    http://oracle-apex.svn.sourceforge.net/viewvc/oracle-apex/wiki/
    Feel free to download add critic etc, I defiantly am still looking for someone that knows regex really well it would help greatly speed development along.
    There will be movement on this and the forum application as I finally have a bit of time to work on these again, of course anyone that wants to help is greatly appreciated.
    Carl

  • AIR runtime and AIR applications built using Captive Runtime still need Admin Privilege to Install

    I am working on a small project to install AIR application(native .exe & .dmg) with AIR runtime without needing the Administrator privilege so I used Captive runtime but the installation is still asking for admin privilege
    I bundled AIR application with AIR runtime using Captive runtime from flash builder 4.6, then I packaged this into a .MSI using Advanced Installer. Now when I install it for a user without admin privilege it prompts me for Admin credentials.
    Can you please tell me if
    1. I need AIR distribution license to install AIR runtime without Admin privilege
    2. Do I need a different installer
    3. Am I missing any step here
    Thank you

    If you're installing to a location where Windows requires elevated privileges, like Program Files, you'll need to have admin privileges to continue.  Are you using an AIR based native installer or have you taken the application with the captive runtime and rolled this up in your own installer?
    Here's a section from the Installation and deployment options in Adobe AIR 3 article that might help:
    Installation privileges
    When designing an installer, one has the option to choose from approaches that may or may not require administrative privilege. For example, a drag-and-drop install on Mac OS X requires no special privilege; users can always copy the application into their own application folders, for which they have the necessary permissions. On the other hand, if registry keys must be written to the machine-specific portion of the registry on Windows, installation of that application will require administrative privilege to do so.
    The two installer formats directly supported by AIR, AIR files and native installers, have always required administrative privilege. This was a design decision made in part to simplify the implementation of the AIR installers: If administrative privilege is assumed to be available, implementation is possible if the registry can be written to, and so on. It was also selected because, in many enterprises, this is the desired behavior: administrators can use the privilege requirement to gate software installation.
    All the same, there are scenarios where supporting installation without requiring administrative privileges is desirable, or even necessary. This can now be achieved using custom installers; you simply need to author an installer that operates correctly with only standard user privilege. In practice this can be easy to achieve; a simple install-by-copy to a writable location (that is, in the user's own folder) will suffice. Should you author a more complex installer, you should keep in mind that the addition of certain operations during the install process will in turn reintroduce the requirement for administrative privileges.

  • Java application built using cr4e(clipse) fails to work in some Windows OSs

    I created a variation of the SampleViewerFrameClient, leveraging the opportunity to automatically refresh (refreshReport()) a Crystal report.  This worked in Windows 2007, but fails to work in Windows 2008 and 2003 (in a couple of ways).
    One theWindows 8 system with Crystal Reports installed, the viewer frame deploys displaying the report selection window, but after selecting and opening a Crystal report, it presents the following error window:
    Problem Showing Report
    Error Code: -2147467259
    This Windows 8 system happens to have both Crystal Reports 2013 and Crystal Reports for Enterprise 4 installed.  Java version JDK 7u55.
    On the Windows 2003 system,  without any Crystal Reports installation, running Java JRE 1.6, it fails with an exception:
    unsupported class version error (major.minor 51.0): SampleViewerFrameClient.
    It runs fine from eclipse on the Windows 2008 system.
    Thanks!

    Fixed the unsupported version error (by compiling with appropriate java compiler in Eclipse), and the report launch error in the viewer was resolved as well.

  • Error when trying to run an application that worked when built with 8.6

    I have a simple program that I wrote in version 8.6 that I never had a problem building and running applications built with it in 8.6.  Two weeks ago I got 2009 in the mail because we had very recently purchased 8.6 and I am getting errors when trying to run an application built with the same code using 2009.  The error has to do with the Mean.vi.  It claims it cannot find it.  The error I get reads as follows:
    An error occurred loading VI 'NI_AALBase.lvlib:Mean.vi'.  LabVIEW load error code 3: Could not load front panel.  I don't need access to this vi's front panel, so I am wondering if it is a problem with the runtime engine and not my code.  Please respond as soon as possible as this will quickly start to impact my testing schedule.  Thank You.
    Solved!
    Go to Solution.

    Hi!
    The same problem ???
    I discussed it with my local NI technical support team. The application works without any problems now.
    Basic rule: when creating an installer be sure that option "Run Time Engine xxxx"  in "Additional Installers" category is checked in spite of the fact that Run Time Engine is already installed.
    Best regards.
    Attachments:
    ADDINST.png ‏13 KB

  • Composite Applications(CAF) only on CE??

    Hello Experts,
    I need a little clarity on the CE. Below are the few silly questions that are I'm having. Could you please clarify them:
    1. is CE a platform that can run composite applications?
    2. can't we run the composite applications on NW 7.0?
    3. imagining that we can't run composite applications on NW 7.0, how can we deploy GP(CAF Process layer) on to NW 7.0?
    4. and the latest NW 7.3, does that come with the common usage type for EP and CE? or else do we have to continue maintaining CE as separate system and integrate that with our mail portal (in case 7.3)?
    5. can we deploy CAF alone on NW 7.0? b'coz our environment is NW 7.0 EhP1 and we have CAF components in my NWDS.
    please help me answering the above questions.
    Thanks,
    Raghava

    Hi John,
    thanks for your reply and sorry for my delay to get back to you.
    2. if CAF in NW 7 and CE are different, what's the main difference between NW and CE?
    5. does CAF come with NW7 by default or do we have to do additional configurations?
    Thanks,
    Raghava

  • Deployment model for application built on JRC of CR XI

    Hi,
    I have developed a standalone Java application using JRC component of CR XI. This application will take report template as input, then set datalocation in report tables using JRC and finally generates PDF reports.
    This application runs fine and i have tested it on the machine where CRXI is installed. For this application to run, keycode is to be set in CRConfig.xml file.
    My question is reg the deployment enviroment (& the keycode):
    1) Can an application built using JRC run on a machine where there is no CRXI installed?
    2) Should the application built using JRC always have the CRConfig.xml with keycode to work? Is there a way to surpass this?
    3) Per my understanding JRC component can be freely embedded in web application, then in this case should the application server also have the CR XI installed to take care of keycode in CRConfig.xml
    4) I am expecting my standalone java application with CR XI JRC components to run on a machine that doesn't have CR XI installed, is it feasible & how?
    TIA,
    M.Ravi

    1. I depends upon the application. Your application might be consisting of .rpt file, which is readable only by CR XI. Though application has been built using JRC , It does require CR XI to be installed.
    Also there is Keycode Tag in CRConfig.xml which matters a big.
    2. Yes, It should always have CRConfig.xml file. But the lates CR4E 2.0 does not require the keycode configured in CRConfig.xml file.

Maybe you are looking for