Compatability with sound systems

I have a Grundig Ovation CD/tuner which has a USB port for playing MP3 files. My ipod isn't recognised by the system and therefore doesn't play. Anyone know why? Different file format?

Just having a USB port is not enough to guarantee compatibility with another audio device.
Your unit must be iPod Ready... which it apparently isn't.
Basically, your audio system doesn't "speak" the iPod's language.

Similar Messages

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

I try to down load itune again it keep tell me it is not compatable with the system and it does not delete the old virsion of itune , is there any idea how to solve that please?

I try to down load itune again it keep tell me it is not compatable with the system and it does not delete the old virsion of itune , is there any idea how to solve that please?

What OS?

SAP ERP 6 system and compatibility with BW systems.

Hi All,
An upgrade to a ECC 6.0 system form 4.6C or 4.7 system is fine. But however, in an integrated environment - the 4.6C system is usually integrated with other SAP Products as well.
The question I have is is a ECC 6.0 system compatible with BW 3.5 or lower versions of BW - i.e. when I upgrade my system to an ECC 6.0 system can these systems still talk in between themselves, or I have to plan a upgrade for this?
If the answer is yes - is it mentioned in any SAP Note/ Website or Document as because I also need an artifact to support the answer.
Thanks, Dibya

Hi Dibya
the component lists (from service.sap.com/scl) document for each release, which product instance is needed for which process (i.e. ECC and NW - BI). This source includes information about old releases as well, but not about mixtures between releases.
In the Upgrade Dependency Analyser will you find information about these mixtures (see for instance: SAP Network Blog: New Tool for Planning Your Upgrade: The Upgrade Dependency Analyzer : New Tool for Planning Your Upgrade: The Upgrade Dependency Analyzer)
regards,
Andreas R

I have an Imac version 10.4.11.I downloaded Firefox version 4.0 and it says it's not compatable with my system. In the mean time I replaced and trashed my old version, which had all my bookmarks, updates, and settings. I am not happy!!!

After I downloaded Firefox 4.0 I replaced my old version and trashed it. Now I've lost everything and when I tried to sign into Firefox 4.0 it said my system did not support it. What do I do now?

I just went through the exact same situation. I trashed 4.0 and then I went to http://www.mozilla.com/en-US/firefox/all-older and re-downloaded 3.6.16. I was relieved to see that all of my bookmarks, etc, were still intact. I am very unhappy that Mozilla is not posting the fact that 4.0 is not compatible with 10.4.11, as there are still some folks like us who have not needed to upgrade to higher Mac OS systems (although I fear we're being forced into it bit by bit)....

[T410] Problem with sound system

When I press the Mute button on the keyboard (near Esc button), the light on the button is on and the sound is muted correctly. However, when I press it again to allow the sound, it does not. The light on the button if off, but the sound is still muted. I must enable the sound by Volume Mixer of Windows. Why?

You can try to following to rule out/fix a software problem:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If still a problem you very likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Hello I am having problem with sound system of my iPod touch

The sound of my iPod touch just becomes low even I have set the tone volume at medium range it started happening from last 2 days it happens when I play a game or app but didn't have affected the sound when played in earphone pls reply thank you

You can try to following to rule out/fix a software problem:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If still a problem you very likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Micorsoft Server Compatibility with Laptop system having Intel Pentium Quad-Core CPU N3530 (2.16 GHz)

I would like to know if I can install Microsoft Server 2008 Enterprise or Standard Edition on a Laptop having Intel Pentium Quad-Core CPU N3530 (2.16 GHz). Currently it has Window 8. I do not need Windows 8 and would like to install Microsoft Server 2008
Enterprise or Standard Edition.
Will it work ?
Thnx.

Hi Zahid-I,
We support the Windows server system install on the certified hardware you can search ask your hardware vendor for exactly supported system or you can search the Windows Server
Catalog to found whether your hardware certified by server 2008, personal experience is most of the laptop not supported the server system.
Windows Server Catalog
http://www.windowsservercatalog.com/results.aspx?bCatId=1283&avc=10
Personal experience is if our PC hardware meet the minimum require of server system we can install it for test lab.
More information:
Windows Server 2008 System Requirements
http://technet.microsoft.com/en-us/windowsserver/bb414778.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Options re: Nike+iPod compatibility with non-nano iPods?

Hi,
I'm a runner who bought a fifth generation ipod (mainly for running) in late 2005. I am interested in the Nike+iPod system but was disappointed to learn it is only compatible with iPod nano, though many nanos use OS 10.3, like the fifth gen. ipod.
Any suggestions beyond selling the one I have and buying an ipod nano?
Thanks

{quote:title=Jeff Bryan wrote:}
The compatibility of the Nike kit with the nano has more to do with the nano being more suitable for running as it has flash memory and not a hard drive (no skipping or moving parts), and is lighter and smaller too. Much more suitable for activity sports. It has nothing to do with the Mac OS version.
Thank you for the reply, Jeff.
I appreciate your points and I don't mean to belabor the issue. I meant to say I purchased the iPod in late '06, which makes it just over a year old. Technically the Nike+ kit was available then, but it was basically brand new and I don't recall being aware of it.
To respond in support of the 5th gen ipod, personally I've run with it well over 500 miles, up to 13+ miles at a time, over steep hills and through heavy rain and skipping has not been an issue once. The same is true for a few other runners I know who use this model. While the nano is smaller, the 5th gen is a good size as well, and a marked improvement over older devices runners used happily for years, so it is far from a critical issue.
There's nothing you can do other than replace your 5th gen with a nano. There are no options to make your 5th gen work with the Nike kit.
I understand and appreciate Apple's making an iPod tailored to running, but logically activity sports would have been considered a key use from the first iPod, and the pre-nano models are suited to this very well also. I am a usually-happy and consistent Apple customer, am just once in awhile annoyed when good (and relatively new) products are not included for compatibility with new systems. It seems to me that the points you mention, while logical, are far from critical, and that a product less than 18 months old using the same OS could easily have been made compatible with the Nike kit.
Thank you again for the reply, I'll forward my thoughts to iPod feedback.

Nano 3G Compatibility with speakers

Hi!
Planning to buy a ipod nano 3G....
I´m a little uncertain about the compatibility with speaker
systems - is there a "compatibillity list" somewhere?
For example: will Altec Lansing IM600 and Griffin Journi work with nano G3-
or will i need adapters of some sort?
Thanks,T

Who manufactures the 3G stick, what is its model number?

Solaris 8 Intel scan hangs on Windows Sound System Compatable

I am trying to install Solaris on a Anigma Pentium II motherboard with integrated AGP/Audio/DVD, plextor CDRW, 40 gig maxtor ide hd new, unpartioned.....
when the sytem scans it keeps hanging on either "Windows Sound System Compatable" or "ADS Sound Blaster....I do not have a soundblaster card in this machine, it is on board sound......
cous anyone please point me in the right direction......I am new to Solaris, please help me get this installed.....
thanks, michael

Just an idea:
After installing the latest kernel + usb patches a system built around
an ASUS P2B showed similar behaviour: Soon after the screen is
cleared during the boot sequence the machine hung. Before installing
these patches the machine was running without problem.
The problem was a disabled USB IRQ in the bios setup. The system has
no USB peripherals connected, so the USB IRQ was disabled in the
BIOS (in an
attempt to free some IRQs - which is actually nonsense in a PCI
system; some old habit from good old ISA PCs). Re-enabling the
USB IRQ in the BIOS fixed the solaris boot problem. Probably the
solaris 8 USB drivers had detected the USB bus and started scanning
for devices there; and that hung the machine due to non working USB controller IRQs.
Maybe you have a similar problem...

HT4587 Hi, I want to set up a sound system in a new house using apple equipment. I have few sets of Bose speakers that I would like to utilise, my question is - what do I need to set it up and how do I do it with regards to AirPlay? Thanks

Hi, new to the forums and apple tbh.
Moving into a new house and want to set up a sound system, thought apple would be the way to go as I have iPads, iPhones, iPod touch and nanos. I also have a few sets of Bose speakers which I would like to incorporate. What I am wondering is, what else do I need to buy to do this? Do I need seperate devices to attach to each speaker? Do I need a new router? And how would I configure it?
Ideally I would like 4 rooms each with their own speakers that could play simultaneously.
Thanks in advance!!!!

First, please check out the following Apple Support article for details on setting up an AirPort Express Base Station (AX) for iTunes streaming. Note: You will need a separate AX for each set of speakers that you want to stream to. Also, note that you can stream a single audio file to one or more speakers, but you cannot stream separate audio files to different speakers simultaneously.
Second, the Bose speakers you mentioned would need to have an audio input jack, either analog or optical digital to receive the stream from the AX. As you know, Bose makes a number of different speaker/home theatre audio options. If your specific model of speakers do, then it's just a matter to use the appropriate audio cable between the audio port of the AX and the speakers.

IMac 10.6.8, Snow Leopard with iTunes 11.0.1. loss of wifi speed when connecting a Bose Sound System via bluetooth

Hello, I have an iMac 10.6.8, Snow Leopard with iTunes 11.0.1. When connecting my Bose Sound System via bluetooth the wifi downloadspeed goes from snappy to a crawl, disconnecting the bluetooth connection, the downloadspeed goes up again. Don't have this problems with the Sound System when connecting it to my iPad. I like to mention too, that the downloadspeed of my iPad is always better than of my iMac. Are there any experiences concerning this problem? Thank you in advance.

UPDATE - PROBLEM SOLVED!!!!!!
You can thank me later - after an hour on the phone, I finally got through to a Senior Engineer.
Apperently the issues lies with GRID VIEW.
Open your Itunes, Click on TV SHOWS, then quickly change your view from GRID VIEW (Defaults to this) to List View and Viola!
We tested it out on the phone just minutes ago, my problem is solved and I suspect if you guys try this yours will be too.

5.1 Sound System with Satellite X200

Hi,
this is my first post here since up until now I've been able to solve all issues regarding my laptop. In the meantime, I acquired a 5.1 sound system to connect to my machine thinking it would be pretty straightforward due to all the technology implemented in this model and the SPIDF output and so on and so forth....well it wasn't :)
I've searched online for a solution but nothing obvious came up, and I've tried just sticking the sound system jacks everywhere just to experiment and see what I get but apparently there's always only 2 speakers working plus the bass.
Can anybody give me a hand?
Thanks in advance, best regards from Portugal
Bruno Belo

Boas!
The x200 sound system is a 2.1 system, so to have a 5.1 system you need an external decoder and bypass the internal system using the SPDIF output.
Did you really aquired a 5.1 sound system or just a 5.1 speaker system ? If is really a decoder you should have a digital input to plug the SPDIF output and configure it to play at least 4.1 with an stereo source, an mp3 for example.
If you only have a 5.1 speakers system(even digital) you'll need an 5.1 external sound card, some are USB interfaced others pcmcia.
Regards from Azores ;)

I get only sound from left with 5.1 sound system on Satellite P100

Hi!
I have a P100-347 and a logitech 5.1 sound system.
The logitech 5.1 has 3 connection: 1 to be plugged to the Line-In, the other to be connected to the Line-out and the 3rd to be connected to the Microphone socket.
When using it on my desktop which has a random SIS sound card it works fine.
Yesterday I've connected it to the P100-347 but I only get sound from the Line-out socket. I have changed the sound preferences to 5.1 but it makes no difference... I only get sound from the Line-out. Is there any drivers update that I should do or is anyone aware of this and how can I fix it??
Just one more thing... With the laptop came this cd "Express Media Player Recovery CD", what is this? Is this something to be installed after runing the "Product Recovery CD" in order to install some drivers or whatever is in this cd comes with the Product Recovery CD as well? Does anyone knows?
Thank you.

Hi
There is no problem. As you said the notebook supports Line-in; headphone & S/PDIF jack and Microphone jack.
If you want to connect the HiFI or another device you have to choose the headphone & S/PDIF jack. Only this port provides the audio outputting.
The both another jacks provide only the function for signal (sound) receiving!
My notebook provides the same jacks and I have connected the notebook to HiFI (5 speakers) via Y-audio cable like this one:
http://images.belkin.com/F8V235-06/FUL1_F8V235-06.jpg

Compatability with sound systems

Similar Messages

Maybe you are looking for