Compatibilidad de driver 845 para daq 8451 para labview 2013

Estoy intentando instalar el driver 845 para poder emplear la daq 8451 para un proyecto pero se diseño empleando labview 2011 y actualmente tengo el 2013, al momento de intentar instalar el driver más nuevo me aparece un error debido a que tengo un software más reciente y no se intala generando que al momento de querrer utilizar el proyecto busca el driver para actualizarlo y no llego a nada.
No se si alguien conosc la forma de poder instalar el driver para labview 2013.

Hola Artama,
Gracias por utilizar los foros de National Instruments! Que versión del driver 845x estabas instalando? Que error es el que te aparece al tratar de instalar? Te envío la liga de la última versión del driver (2.1.2 agosto 2013):
http://www.ni.com/download/ni-845x-2.1.2/4141/en/
Podrías descargarlo e intentar nuevamente con esta versión? En caso de que te siga apareciendo el error te agradecería si pudieras adjuntarlo en tu respuesta.
Saludos! 

Similar Messages

  • Labview 2013 daq assistant missing

    I can't see the DAQ assistant in Labview 2013!
    Labview 2013 + real-time + fpga
    Max 5.5.1
    Visa 5.4.0
    Device driver august 2013
    Why?
    Thanks
    Solved!
    Go to Solution.

    Did you install DAQmx AFTER installing LabVIEW?  Can you see any of the DAQmx palette?
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Boa noite. O problema ocorre com qualquer navegador. Hoje liguei para a Microsoft, para pedir ajuda na configuração do e-mail que aparece o erro #872. O técnico

    Boa noite.
    O problema ocorre com qualquer navegador.
    Hoje liguei para a Microsoft, para pedir ajuda na configuração do e-mail que aparece o erro #872.
    O técnico entrou remotamente e fez todos os estes possíveis e imagináveis.
    Fiquei remotamente durante uma hora e trinta minutos. E ele não conseguiu resolver.
    O problema não é com o outlook é com o GMAIL.
    Após vários testes, agora aparece a seguinte mensagem de erro:
    “Servidor respondeu: 421 4.7.0 Temporary S” pelo outlook e pelo GMAIL (#872)
    O técnico da Microsoft informou que o problema é com o GMAIL.
    Por favor estou desesperada, desde 10 de julho de 2014 não recebo e envio e-mail da conta:
    Tenho essa conta para trabalho e pessoal, isso esta causando muito prejuízos.
    POR FAVOR ME AJUDE A RESOLVER ISSO.
    Desde já muito obrigada
    Elisabeth
    De: ****** [mailto:******] Em nome de Cesar JB via Fórum de Ajuda do Gmail
    Enviada em: segunda-feira, 28 de julho de 2014 07:57
    Para: *****
    Assunto: Re: ERRO (@872)
    Olá Elisabeth,
    O mesmo problema ocorre quando você utiliza um navegador (Chrome, Firefox ou Internet Explorer) ou somente quando você utiliza um programa cliente de email (ex: Outlook).
    Se estiver usando um navegador, experimente fazer a limpeza do cachê e veja se a referência abaixo sobre erros no Gmail te auxilia.
    Abraço,
    Cesar JB
    On Sunday, July 27, 2014 10:48:00 PM UTC-3, Elisabeth Reboucas wrote:
    gmail
    recebo uma mensagem de erro. (@872).
    sempre que mando email da minha conta principal. POR FAVOR QUEM PODE AJUDAR.
    A RESPOSTA POSTADA EM 20/07/14 NAO RESOLVEU O PROBLEMA.
    "Erro
    Ops... ocorreu um erro de servidor e seu e-mail nao foi enviado. (#872)
    OK"
    a mensagem de erro esta escrita acima.
    Por favor preciso de ajuda.
    Obrigada.
    Elisabeth
    <hr>
    ''emails removidos para privacidade dos mesmos'' - Diego Victor

    Boa Noite Elisabeth,
    Sua explanação sobre o seu problema está um pouco confusa e com poucas informações, o que dificultada a melhor resposta e/ou a resposta correta. Porém que você está com problemas no uso do Gmail pelo seu aparelho Mobile, eu pesquisei alguns problemas e pré requisitos para que esse uso seja feito sem maiores complicações.
    Você pode acessar o Gmail pela Internet em navegadores como Google Chrome, Firefox, Internet Explorer e Safari no seu computador. Para acessar o Gmail com um navegador instalado em um dispositivo móvel, esse dispositivo deve atender a estes requisitos mínimos.
    '''Requisitos Mínimos'''
    Para acessar o Gmail para celular, o navegador de seu celular deve atender a alguns requisitos mínimos.
    Primeiramente, verifique se seu navegador é compatível com XHTML. Caso não tenha certeza, visite http://www.google.com/xhtml e faça uma pesquisa. Se não funcionar, seu navegador pode não ser compatível com XHTML.
    Você pode entrar em contato com seu provedor de serviços para celular para verificar os seguintes requisitos:
    1. Seu navegador deve ter os cookies ativados e sua rede também deve permitir cookies. A configuração de cookies geralmente está localizada nas configurações do navegador de seu telefone.
    2. Sua rede deve permitir tráfego SSL seguro.
    3. O navegador de seu celular deve ter um comprimento de URL de 2000 bytes.
    4. O navegador de seu celular deve permitir redirecionamentos de 10.
    Para usar o Gmail, ative os cookies e o JavaScript'''
    Independentemente do tipo do seu navegador, você precisa estar com os cookies ativados para usar o Gmail. Além disso, se seu navegador for compatível, ative o JavaScript. Pesquise instruções no Google sobre como ativar os cookies e o JavaScript no seu navegador.
    Espero que com isso você resolva o seu problema ou a menos tenha ajudado a ajuda-lo.
    Um grande abraço.

  • Is it possible to refer to paragraph 90 for example in para 110 and for this to automatically change to para 96 if para 90 becomes para96 because of document changes

    Is it possible to refer to paragraph 90, for example in para 110 of a long document and for this wording to automatically change to refer to this paragraph as para 96, if para 90 becomes para 96 because of document changes ?

    What I would like to know refers to whether there is a way for a reference to a particular paragraph number in a document can be automatically updated if that paragraph number changes becasue of other alterations to the document e.g can a reference to paragraph 90, in para 110 be automatically updated to refer to this paragraph as para 96, if para 90 becomes para 96 because of document changes ?

  • ¿Alguien sabe como activar la opción de "tocar para hacer clic" para el trackpad?

    ¿Alguien sabe como activar la opción de "tocar para hacer clic" para el trackpad?

    Siempre se puede ir a comprar un simple caso de ella, y hacen un buen trabajo de proteger a la parte de atrás.

  • Les photos chargées de mon iphone 5S par cable ou par mail ressortent anormalement fonçées, que faire svp ?

    pourquoi les photos prises par mon iphone 5S  8.1.3 et chargées sur mon mac OS10 aussi bien par cable que par mail ressortent trop foncées sur iphoto, dernière version itunes installée 10.2 que doit je faire SVP ?

  • How can I control a stepper motor drive using a DAQ card?

    I need to control a simple CW/CCW stepper motor drive using a DAQ
    card.  I simply need to output a 5 volt signal and then a drop in
    the signal, and so on 200 times or steps for 1 revolution.  I have
    desiigned the basic program, but do not know how to output the
    appropriate signal.
    Cheers,
    Matt

    What DAQ card do you have? Ideally, one with a counter output to generate the steps, where you can control frequency. If you try to start the motor too fast (acceleration or abrupt application of fast pulses) it may stall out. Search in Help/Search for Examples for 'frequency' and 'pulse' for example of frequency generation. You can also use a digital output on the DAQ card to control direction.
    If DAQ card does not have a counter, you coul do a software timed loop to toggle a digital output to generate the pulse train. It may not be fast enough nor accurate for your application, do not know from info you have given
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    "It’s the questions that drive us.”
    ~~~~~~~~~~~~~~~~~~~~~~~~~~

  • Driver non compatible avec ma version LabVIEW

    Bonjour,
    J'ai un driver LabVIEW de la carte Amplicon PCI-215 compatible avec les versions LabVIEW 6.0, 6.1, 7.0, 8.0 mais pas avec la version que j'ai (LabVIEW 2010). Du coup je n'arrive pas à lancer le fichier Setup.exe du driver pour l'installer.
    Pouvez-vous m'aider s'il vous plait à résoudre ce problème ?
    Merci

    Bonjour Salma,
    Merci d'avoir posté sur le forum National Instruments.
    Le fait de pouvoir lancer ou non le Setup.exe de l'installeur de ton driver
    n'a rien à voir avec LabVIEW. Généralement, cela vient du fait que tu ais
    changé d'OS. Vérifie que ton driver est bien supporté sur ton OS.
    Une fois qu'il est installé il est tout à fait possible de récupérer les VIs
    d'une version antérieure de LabVIEW (8.0 par exemple) et de les mettre au bon
    endroit pour qu'ils apparaissent dans LabVIEW 2010. Un petit MassCompile sur le
    répertoire sera nécessaire.
    Benjamin R.
    R&D Software Development Manager
    http://www.fluigent.com/

  • Can't find DAQ assistant in LabView

    Hi! I installed the NI-DAQmax driver 9.3.5 after installing LabView 8.5 Student edition and I am not able to find the DAQ Assistant in the function palette. Could you please let me know what else could I do?
    Thanks!
    Solved!
    Go to Solution.

    suriguvi88 wrote:
    i am using labview 2012 and i tried to intall daq version 9.1.7 and the harware i am using is  NI USB 6009
    I'm not finding a DAQmx version 9.1.7.  Even then according to this fancy chart, You need DAQmx 9.5.5 or newer (currently up to 9.8) to work with LabVIEW 2012.  If you don't have the driver disk that came with your copy of LabVIEW, I would recommend downloading the latest version (DAQmx 9.8).
    suriguvi88 wrote:
    and if i want to use the bio-medical tool kit for labview 2008 is it possible ??
    There was never a LabVIEW 2008.  Do you mean 8.6?
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Fusion Drive option for iMac 21.5" late 2013

    Fusion Drive option for iMac 21.5" late 2013 will upgrade main SATA HDD to 7200rpm model? Or just add SSD to standart 5400 rpm HDD for 21.5"?
    Thank you for your attention.

    You can't add an internal drive, but you can add as much storage as you want via Thunderbolt.

  • Getting the data in file using DAQ assistant in Labview

    I am using SCXI 1000 chassis, SCXI 1125 input module and SCXI 1320
    terminal.
    I am using DAQ assistant in labview to obtain temperatures and store it in
    a file. The experiments run the whole day and I need the whole data
    generated during this time to be stored in a single file, but I am unable
    to store it in a single file.
    Can someone please give me some insight as to how can I achieve this?

    Hi Mr,
    It would be helpful to see your code to see exactly how you are acquiring the data. Are you doing continuous buffered measurements? Or are you performing single point temperature measurements in a while loop?
    Either way you will want to use the "write to spreadsheet" VI in your loop. Simply wire your data into the "write to spreadsheet" vi and se the "append to file" input to TRUE. This will make the data add on to the end of the file with each iteration of the loop. The "write to spreadsheet" VI is located in the file IO pallette in LabVIEW.
    Thanks,
    Sal

  • Will a Samsung Electronics 840 EVO-Series 500GB 2.5-Inch SATA III Single Unit Version Internal Solid State Drive MZ-7TE500BW work in a late 2013 Mac Mini

    Will a Samsung Electronics 840 EVO-Series 500GB 2.5-Inch SATA III Single Unit Version Internal Solid State Drive MZ-7TE500BW work in a late 2013 Mac Mini

    Would you happen to know if it will work in a mid 2007 iMac running Mavericks with 4GB of RAM? I need this to last this year and next year I am buying my MacPro, anyway, I dont want to put all the work in to installing it if its not going to work, thanks for any help!

  • Position for Programmer experience with DAQ and C++/Labview

    We are company located in the Bay Area of California and looking for
    a programmer experienced with programming (from scratch) DAQ boards for
    signal generation (sine/triangle/sawtooth) waveforms as well as DAQ
    digitizers, FFT, and data displaying.
    You should be
    able to program these cards using C++, but should have strong knowledge
    of labview as well. You may be asked to translate and migrate labview
    VI's to the C++ enviroment.
    Job applicants from
    the Bay Area, as well as abroad are welcome to apply.Those outside of
    the Bay Area can develop code at your own home office and must have
    C++/labview on a suitable computer for programming.
    Applicants should apply by sending an email to: jobs at intereasemedical dot com and indicate IE002 as the job position code.
    Do not post your resume as a reply to this forum post.
    Do include your resume in PDF or DOC format
    Do
    include your billing rate and if you are authorized to work in the U.S
    if located in the Bay Area. We do not provide H1B sponsorship. 
    Responses without the above information will not be considered.  
    Thank you! 

    Hello, I have much experience with DAQ, C++ and Labview. How to apply for this position?

  • Windows Server 2012 C Drive gets always full with exchange server 2013 installed

    Hi All
    My C drive gets full always with exchange server 2013 installed what would be the reason because this is causing extremely bad to my environment can somebody help me please
    Thanks & Regards, Santosh Chowdary Vasireddy System Administrator Prolifcs DHFLVC Silicon Towers, 5th Floor, Survey #14, Kondapur, Hyderabad – 500 032. Work +91 40 3999 1999 Ex.1656 l Cell +91 9849277255 l [email protected] A Global
    Provider of IBM, Microsoft and Testing Solutions Award Winner for Technical Excellence, BPM, SOA, Portal and Governance

    Hi,
    Based on your description, I understand that this issue (C drive gets always full) occurred after Exchange
    Server 2013 installed.
    à
    But my exchange server is installed in different Drive (EX: D)
    I suggest that you should check file system to see what folders or files are taking up the space recently.
    This issue may be not related to Exchange server.
    Please refer to the following article and enable Disk Cleanup Utility. Then monitor the result.
    Enabling
    Disk Cleanup Utility in Windows Server 2012
    Meanwhile, please check if the winsxs directory is growing bigger.
    How
    to Reduce the Size of the Winsxs directory and Free Up Disk Space on Windows Server 2012 Using Features on Demand
    By the way, please check if you have installed update rollup 2836988. I noticed that Windows.edb file grows
    very large. For more details, please refer to the following KB.
    The Windows.edb file grows very large in Windows 8 or Windows
    Server 2012
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Driver install don't detect Labview 2013

    Hello,
    After installing Labview 2013 (32bits) , installing driver (Daqmx,etc...) (DVD feb.2013) , application driver don't detect labview 2013, and doesn't want install anything.
    Do you know this problem ? and how can i fix ?
    Thanks.
    Ludovic
    Windows 7 32bits
    Labview 2013 Eng 32bits
    Devices drivers DVD4 feb.13 (also try with Aug12 version)

    Hello,
    Thanks for answer,
    I can't find link for download devices drivers August2013...  Exist ?
    (@Julien..) Your download link is Labview 2013 download application, but don't contain drivers (i.e. DaqMx)
    In other link for download Labview (2013), ( https://lumen.ni.com/nicif/confirmation.xhtml ) recommended download devices drivers is August 2012 ... (http://joule.ni.com/nidu/cds/view/p/id/3145)
    Best regards
    Ludovic

Maybe you are looking for

  • Null values not displaying in the LOV on the parameter form.

    My report works perfect while in Oracle Reports 10g, however when I move it to our menu (Oracle Forms 10g) it does not display the null in the LOV on the parameter form. This report allows the the user to select by inspector or district or everyone f

  • Is there a way to seed the SaveAs value triggered by the digital signature

    Hello Everyone, I have a form going out to hundreds of people. When the form is completed, the last thing they do is digitally sign the form (which prompts them to save it), and then they click a submit button, which e-mails it to me. The issue I am

  • Help in moving iMovie Event Library to an external HD

    I'm trying to move everything from my iMovie '11 library from my computer to my External HD. I have managed to move all my projects by holding down the command key and dragging them to the external HD icon but that process doesn't work on the EVENT l

  • 3 different data providers

    I have 3 different data providers. I want to put all these 3 data providers value in horizontal table. I already have veritcal but to see the comparision I need to have horizontal table. I tried to drag and drop 1 of the data provider in 1st row and

  • How can I save website icons

    Hi, I tried this question in other forums with no success. How can I save website icons from Google, Yahoo, etc? All I get is the safari archive icon when I save a website to the desktop. Thanks MC