Compatibility Aio remote Ipad

Hello I just installed the app Aio remote for ipad but can not find my HP Officejet 4500 Wireless Multifunction Printer - G510n I wanted to know if it was compatible with this app AioRemote??
This question was solved.
View Solution.

No problem, glad I could help
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Similar Messages

IPad app AiO Remote

I scanned document with IPad app AiO Remote and HP printer.
App created .pdf file 306 Mb in documents folder on my iPad Air iOS 8
When I tried to open document in AiO Remote, I receive error:
Not enough memory to complete operation.
And then .pdf preview window showed error
The operation couldn't be completed.
NSURLERRORDOMAIN error -999
Is there any way to save my scanned .pdf document and what is this error means?
Is this some restriction about size of scanned document in AiO a Remote? Or just a bug?

Hello @Justromagod ,
Welcome to the HP forums.
I understand that you are getting error messages when trying to use the AIO remote app.
I would like to help.
I get the 'Not enough memory to complete operation' message tells me that you might be running out of room on the iPad.
Also, the -999 error usually means: another request is made before the previous request is completed.
You could uninstall, then reinstall the app.
There is a Cloud Services department that supports the App.
Please call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

AiO Remote app on iPad/iPhone does not find M1217nfw

Hi,
I have a M1217nfw setup on my WiFi network. I can use Airprint from my iPad or iPhone to print on it - works fine. However I want to use the AiO Remote app on my iPad or iPhone to scan documents from this printer to my iPad/iPhone.
The problem is that when I try to use the app it tells me that it cannot find any printer! I upgraded the firmware on the printer - still no go.
I even tried to connect it using the HP Wireless Direct options - still no go.
Treid to connect using the printer's IP address - still no go.
According to the document http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03843137&sp4ts.oid=2... - the M1217nfw is supported by the AiO Remote app.
Any help or clues would be greatly appreciated!
thanks,
vijar

Hi @vijar,
Welcome to the HP Support Forums. I see that you would like to learn more about HP’s All-in-One Printer Remote app.
I have included the HP All-in-One Printer Remote Mobile App FAQs document. It has a section dedicated to the printers that support this app and the Laserjet 1217nfw printer is not supported by the app. I have notified the appropriate department regarding the document.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

AIO Remote

Can you tell me why I can use HP e-print on my Ipad but my C4385 is not compatible with AIO remote. My Ipad has no problem finding and printing on my C4385 using HP e-print. However AIO can not find my printer. Every other scan and print app that I have tested has no problem finding my C4385. How is it that this HP software can't find one of its Owen. The printer is connected through the same network as my Ipad.
Thanks !

Hi Florami,
Welcome to the HP Support forums. I understand that the HP All-in-One Printer Remote app is not scanning from your Photosmart C4385 printer.
I have included a document about which printers support the various HP Cloud services. Your printer is not a supported printer for the AiO app.
HP Web-Connected Printers and Supported Cloud Services
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Printer app (hp aio remote)

When I want to print from the app I choose photos
and the I get all my photos but I get the oldest ones
first and I have to scroll all the way to the bottom
to get the newest photos. I have ca 3000 photos
so it's boring to have to scoll down every time.
In the photo file on ipad/iphone you get
the newest photoes first.
Is it possible to get the newest photos first in
the Printer app (hp aio remote)?

Hi @Johannesnorway,
Welcome to the HP Support Forums. I understand that you would like to change the sort order of your photos in the HP All-in-One Printer Remote app.
There currently is not a way to change the sort order. I have included the HP ePrintCenter Submit New Idea page if you choose to submit your idea.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP AiO Remote will not recognize scan and copy function of HP Envy 120 printer

Good morning! HP AiO Remote App is installed on my iPad4 and in the same WiFi network with my HP Envy 120 printer. The printer is recognized by the app and marked with a green led. When I tap on scan or copy in the app menu, it tells me that these functions were available in the app only for printers which provide these features. But HP Envy 120 has both scanner and copier. And last time it worked. Some idea what could have happened here? Thanks. UJ

Hi UJKarl, welcome to the HP Forums. You should be able to scan from the HP AIO Remote App on your Envy 120 printer. You probably just need to power cycle the printer, iPad and router to regain proper function.
Turn off your printer with the power button. Power down the iPad by holding the sleep button down until you get the option to 'slide to power off'. Then disconnect the power cord to your router and count to about 10, and then plug it back in. Once the router comes back online, turn the printer on. When the printer comes back online (blue wi-fi light stops blinking), then power the iPad back up. Try again, and it should work.
Let me know how it turns out.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

AIO remote does not find my printer

I changed Internet providers a few months ago. I have not been able to print from my iPhone or iPad since then. AIO remote does not find my printer at all.

Hi,
Both AirPrint and the HP AIO Remote app relies on Multicasting, a such have to be supported and enabled by your router.
Some routers support a such by default, some require settings changes and some do not support Multicasting which required for a such.
Please clarify your router brand and model to better understand any possible steps to try.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

AiO Remote iOS app -scanning A4

I have a Photosmart 5515 All in One printer and have been using the iOS app AiO Remote app to scan in some A4 pages. I set the app to scan to a document and also the page size to A4. Looking at the resultant document it has scaled the the document down. It has centralised the document but you end up with margins of a couple of inches all round.
Has anyone else noticed this?
Does anyone know how to overcome this?

Hi Rturner003,
Welcome to the HP Support forums. I understand that you are encountering difficulties when scanning A4 documents with HP's All-in-One Printer Remote app.
I did some testing on this with an iPad and 3 different ePrint capable printers and each time I was able to recreate it. However that doesn't mean we are kippered. I have included a link to a post on the forums and the key part for you to get your A4 scanned document to print the document as you require, please follow step 3 after you have scanned the image. The key is to pinch the image to the size you would like.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

AiO Remote and LaserJet

I have a HP LaserJet CM1415fnw and the firmware is 20131028.
It prints perfectly from my PC Windows 7(64bit) and quarter size from my Ipad iOS 7.0.6.
If I use HP ePrint it prints but I get a dirty shadow repeat 56mm down the page for the bottom half of the sheet which is unacceptable.
I would like to use AiO Remote but the program cannot find my printer which is connected to my router by an ethernet cable any ideas would be appreciated?

Hello kingfishers,
Welcome to the HP Support forums. I understand that you are trying to print to your Laserjet CM1415fnw printer. You indicated you have a couple of different issues; printing from iPad is smaller than from your computer, you have print quality issues when using ePrint, and the AiO app doesn't find your printer.
To better assist you, would you please provide some further information:
1)       When trying to print from your iPad are you using Apple's AirPrint feature or the HP ePrint app? Are you trying to print a photo from your iPad when your documents seems to shrink to roughly 1/4 the size?
2)      Are you getting the "dirty shadow" when you print the same document from your computer? Are you emailing the document to the printer or are you using the HP ePrint app?
3)      You indicated that your printer is plugged into your router using an ethernet cable which would be why the HP All-in-One Printer Remote app cannot find it. I've included The Printer Does Not Support Ethernet (Wired) and Wireless Network Connections at the Same Time for your reference.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Aio Remote: PDFs not recognized by Google drive.

Aio Remote on iPad Air2 iOS 8.1.1 - I created a PDF on my iPad from my HP Envy 7640 using Aio remote app. In the files/document section it's there (3 pages) as a PDF. But when I upload a copy from Aio Remote to Google Drive it's not recognized by Google Drive as a PDF even though it has a PDF extention. I have other PDF files stored in Google drive that are perfectly fine. It must be something in your app that is the problem.

More info: if I send it from Aio remote as an email attachment to myself I get a PDF that I can upload to Google drive and Google drive reconizes it as a PDF. again proving it is Aio remote that is doing some thing wrong when uploading to Google Drive.

Aio remote can't find printer

I have a HP Envy 4507. My AiO Remote app can't find it. This is not a compatibility issue as I have been selling 4507's which I demonstrate by connecting to them. I originally was able to connect on the one at home but not lately. I keep on seeing the one from work. HP ePrint sees the home one fine. I have reinstalled AiO Remote and now it cannot see any printers, no matter how I try to connect. Tried ip address, direct (which was working before) and through wireless router which worked when I first set it up.

Hi,
Thinsg to quickly check would that there has been no recent wifi password changes - if there has been any, they password would need to be re-entered into both the mobile device and printer.
Another quick thing to try is restarting the mobile device - this sometimes helps re-establish the connection.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

AIO Remote not working

We have an HP 6500 E710n which has worked flawlessly with the AIO Remote IOS app since it was introduced. The app was updated in the last few weeks and it is now not scanning remotely. The app will communicate to the printer, intitiate the document feeder to scan, say it is scanning page (x), and then when it is finished, it says there was a problem - check the scanner. NOTE: I have tried 2 different iphones and 2 different ipads - same behavior. I have turned the printer off, reset the router, reset the WIFI on the printer, and nothing is working. NOTE: I AM able to scan from my MAC - so it is the most recent app release on IOS which seems to be the issue. Please help - I need to be scanning!!

I have the EXACT same problem since the update, with no resolution yet.

HP AiO Remote app will not recognize scan and copy function of HP Envy 120

Good morning! HP AiO Remote App is installed on my iPad4 and in the same WiFi network with my HP Envy 120 printer. The printer is recognized by the app and marked with a green led. When I tap on scan or copy in the app menu, it tells me that these functions were available in the app only for printers which provide these features. But HP Envy 120 has both scanner and copier. And last time it worked. Some idea what could have happened here? Thanks. UJ

Replied on: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-AiO-Remote-will-n...
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP AIO Remote shows wireless printer offline when it is online and can print to it.

HP AIO Remote installed on my Windows 8.1 Yoga 2 shows my wireless printer is offline, when it is online and I can print to it wirelessly. How can I get it to recognize my wireless printer is online wirelessly? AIO Remote will only recognize the printer is online when the USB in connected to the Yoga 2.

Hi rpmcintyre,
Thank you for the additional information. I apologize for misunderstanding. I just want to confirm that the HP AiO app that you downloaded onto your Windows 8.1 computer is showing your printer as offline when you are able to print wirelessly to the printer.
I have two different documents for you. The first one is How to Use the HP AiO Remote App for Windows 8. It has a FAQ section at the bottom of the document with trouble shooting steps. I have also included the Supported Printers for the HP Scan and Capture App.
If the above documents don’t assist you, would you please let me know which make/model/product number of HP printer that you have? How Do I Find My Model Number or Product Number?
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Using AiO Remote and HP ePrint to remotly control printer

Hi,
With ePrint Home and Biz and the previous version of the AIO remote app, I was able to control the scanner and printer as long as I remained connected to the Internet. In other words, I did not have to be within reach of the wireless network at home to be use the wireless features of the HP Office Jet Pro 8600. I cannot find the way to scan or copy any documenta even if not at home. All these could be done if there was someone at home who would be able to place the documents on the glass.
Is this feature available the HP connect and current ePrint?
Thank you,
Alvaro A.

Hello traveler021,
Welcome to the HP Support Forums!
Regarding your question about the AiO Remote app and ePrint when trying to scan or copy with the Officejet 8600, you have to be on the same WiFi network.
The AiO Remote app does not allow you to control scanning or copying over the Internet. I do apologize for being the bearer of bad news, but this is not available without being on the same network.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Compatibility Aio remote Ipad

Similar Messages

Maybe you are looking for