Compatibility betw Soundbooth/Audition and Nero

I am demo-ing Soundbooth and Audition.
I think that Soundbooth is sufficient to my needs. I have previously used Cool Edit 1.2. (I'm on a new computer now.)
I make live recordings to teach Torah chanting, Jewish prayers, etc.
And then sometimes cut the recordings onto CDs.
But when I went to create a CD today, Nero complained that some of my files "may have been corrupted."
Will this be a problem with fully installed Soundbooth?
With fully installed Adobe Audition?
What's the fix?
Thanks.
Jack
Columbus, Ohio

The only thing in common would be that they could open the same audio files. You can't open an Audition session file in Soundbooth, I'm afraid.

Similar Messages

What is the speed/performance comparison between Soundbooth CS5 and Audition CS6?

Obviously, I don't need to be convinced about the difference. However, in demonstrating and working with Audition I didn't take a note of these speed differences. Does anyone have this information for business justification reasons?
I am looking for the speed of a sound file (*.wav, approximately 1-5minutes in length) rendering in Soundbooth CS5 and Audition CS6 as well as a comparison of doing 10 files (approximately 1-5 minutes in length each) in Soundbooth and in Audition CS6 (using batch processing) to *.mp3 with basic processes applied. Basic processes that I am checking are Noise Reduction, Trimming front and end silences, Normalization, and rendering to *.mp3 (from *.wav). If anyone can do this for me, that would be awesome!!

travis_smith_ wrote:
Hello _durin_, yes all those are great arguments that I've already included; however, some people like to use accurate measures/times/processes...they want numbers.
So, do you (or anyone else) happen to know the render engine speed of 1 file in Soundbooth v. 1 file in Audition?
What Durin hasn't perhaps made quite clear is that you'd have to do this on just one machine to come up with any comparisons at all - and if that machine isn't identical to yours, then it's going to be meaningless anyway; some of the processes (like NR) will vary considerably between two different machines, even running the same software. There is no way on earth that this would be an accurate comparison, and I don't think it would convince anybody who actually understood what was at issue. This is the politest way of saying that it's not going to happen... and if Durin, as Audition's Product Owner, isn't prepared to commit himself, then nobody's going to.... BUT:
Now I am moving towards the argumentation that it should replace everyone's Soundbooth, which is why I need the justification. I would run the tests myself over the current set of files, but with the license gone, I cannot.
Your real justification isn't going to be based on anything like dodgy process measurements at all, but this: Soundbooth is discontinued - there's very little, if any, support for it now, and there will be no updates to cope with OS changes, etc. Audition, on the other hand, is a long-term, well-supported software product that's under active development, and this is clearly intended to continue. Also there are business package deals to be done (like active subscriptions, etc) that simply weren't available to Soundbooth users, which companies can use far more flexibly. I think you'll find that arguements like this will cut far more mustard than any odious comparisons of 'speed' will.

Diff betw SY-LSIND and SY-LILLY

Hi,
Tel me the Diff betw SY-LSIND and SY-LILLY.?
Points wil b rewarded for useful answers.
Thanx in advance.

Hi Pavitra
SY-LSIND
Index of the list that is being created (basic list: 0, detail list > 0). Each time an interactive list event occurs, the system automatically increases SY-LSIND by 1. SY-LSIND can be changed in the ABAP program to navigate between detail lists. Changes to SY-LSIND are not taken into account until the end of the list event. Therefore, any manipulation of SY-LISND should be done using the last command of the processing block.
SY-LILLI
Line from which the event was triggered Counting begins at 1 and includes the page header.
and here is one more
SY-LISTI
List Index of the list from which the event was triggered
Regards Rk

Compatibility between Java crypto and open ssl

Hello
I have some question about compatibility between java crypto and openssl library.
This is my case:
1.I created DESede key and stored it to file:
SecretKey key = KeyGenerator.getInstance("TripleDES").generateKey();
File f = new File("c:\\key.dat");
DataOutputStream dos =new DataOutputStream(new FileOutputStream(f));
dos.write(key.getEncoded());
dos3.close();2.I encrypt some file "c:\\normal.dat" through:
ecipher.init(Cipher.ENCRYPT_MODE, key2);
byte[] enc = ecipher.doFinal(normalData);
File f2 = new File("c:\\enc.dat");
DataOutputStream dos =new DataOutputStream(new FileOutputStream(f2));
dos.write(enc);
dos.close();

You have carefully left out some critical java code, namely the Cipher.getInstance() method. You'll notice in the documentation for this method that there 3 components to the "transform" argument of this method, the algorithm, the mode, and the padding. All of these must match exactly with the what openssl is using. Furthermore, if you are using one of the modes which require an IV, like CBC mode, then this must match exactly too. If you don't explicitly specify some of these parameters, you might get default values supplied. It is up to you to find out what these are.

I like ti known about compatibility between Windows 8 and iTunes

I like ti known about compatibility between Windows 8 and iTunes

It works for some and not for others.
At this time, there is no publicly available version of iTunes that is supported on Windows 8.
Only Apple knows when that will change.

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Hi Elizabeth,
Do your Mac meet any of these requirements?
http://www.wvnet.edu/services/webct/requirements.html
From this it appears to be PC only!???
http://sourceforge.net/projects/awebctcclient/files/Pancake%20%28it%20own%20proj ect%20now%29/Pancake%20Console%20V1.0.0/PancakeConsole-1.0.0-src.zip/download
Can you provide any more info on which bersion or file you have?
Can you tell us why you need this for your use?

Compatable format for mac and windows

how do i make a document compatable with my iBook and my friends PC, i need to give her files i created on my computer, but nothing is working, not .DOC .RTF nothing. i need help!!!

The only way for an AppleWorks file to be viewed on a PC is for the PC user to have AppleWorks for Windows. However, there are many formats you could save the AppleWorks files as that most Windows users could use. For all of these, choose "Save As..." from the File menu & change the "File Format" in the drop-down menu. You do need to add the appropriate file extension to the file name as Windows does not know what program to use without it and AppleWorks will not add it for you.
1. For pictures, JPEG (not JPEG 2000) is best. Add .jpg to the file name.
2. For word processing, most will use Word Windows 97, 2000, XP. Add .doc to the file name. You can also save as RTF (.rtf) or plain text (.txt).
3. For spreadsheets, save as Excel & add .xls to the file name.
You could also save any document as a PDF which can be viewed by Acrobat Reader. Essentially, you print the file to a PDF format. Choose "Print" from the File menu & click the button at the bottom of the dialog box that says "Save as PDF." You will get a regular save dialog box. This method does add the appropriate .pdf file extension, just make sure "Hide extension" is not checked. I have found, though, that many PC users don't have this installed on their computers.
Peggy

Delete audit and trace files

Is anyone aware of why we should not delete audit and trace files under the oracle admin directory that are over 30 days old? I don't know that there is anything in place to do this and they are building up. Tuldcorpadb01:/oracle is at 96%. These files aren't that big, but there are a lot of them. See counts below.
oracle:tuldcorpadb01:ecmd> cd admin
oracle:tuldcorpadb01:ecmd>find . -name \*.aud -type f -ctime +30 -ls|wc -l
25149
oracle:tuldcorpadb01:ecmd>find . -name \*.trc -type f -ctime +30 -ls|wc -
2426

Move older audit files to a different filesystem until you find someone being able to define what files can be deleted.
Regards
Gustavo Restuccia

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

The base mini has 4GB and a 5400 RPM hard drive. It is slow to start up and slow to launch large application such as Word (and I'd assume Adobe Audition) due to the slow drive. I've not used a new 4GB model, just the 8GB model, and the 8GB model (except for the slow drive) handles everything I've thrown at it, including running Photoshop, Word, Safari, and Mail at the same time but there is sometimes a delay switching between programs as the swapfile is updated. Overall I was not happy with the 5400 RPM drive (perhaps because I have MBA and iMac with Fusion drive) so I eventually upgraded it with an SSD. Now the mini is truly a warrior.

Is JVC Everio GZ-HM330 Camcorder compatable to Mac OSx and if so where can I download the software please?

Is my JVC Everio GZ-HM330 Camcorder compatable to Mac OSx and if so where can I download the software please?

chrisfrommarion wrote:
Thanks, while it worked on yours it doesn't work on mine, any other ideas?
Are you holding down the "d" key, all by itself, just after the system shuts down for a restart?
And how long did you hold it down?
I held mine down for about 40-50 seconds. Then I lookat at my routers WAN light and it was flickering so I let up on the d key.
If that does not work then maybe there is something wrong with your MBP. Is that the reason you want to run this test, something isn't right with your unit?

Audition and Vista-Data Execution Protection

My old system gave up recent. I bought a new 64bit system with Windows Vista Ultimate. I reinstalled Audition and could not get it to run.
I kept getting and error message - "To help protect your computer, Data Execution Protection has closed Audition." I followed to instruction from vista to silve the problem, but to no available. I need help. I have too many projects lined up. Thanks

As no-one else has answered, I'll say what I remember.
I believe that the problem was with Vista64 sp1 and Audition 3.0 before the 3.01 patch, and there were 2 workarounds. The first was to install the original Vista64 , then AA 3, then install Vista sp1, the second was some convoluted process involving putting the PC's date forward, installing, then putting the date back. I thought a patch was issued by Adobe to sort all this out, but it doesn't seem to be on their downloadable updates any more.
This may all be complete rubbish, because here, by luck or good judgement, the installation of AA3 on Vista64 Ultimate went fine. My Vista DVD is non-sp1, so that may be why.
It would be nice to have a clarification from Adobe about what the actual situation is now.
PS A patch was indeed issued. I have it here. If it's still on the Adobe site it is quite well hidden! It's a tiny zip file.

Compatibility between version 8 and 9

We have a new Windows 7 Professional 64bit machine arriving soon, on which we want to install Framemaker and Creative Suite Design Standard 4.
Design Standard looks fine - it will be the same version so I assume there will be no issues, Framemaker on the other hand looks like it could potentially cause some issues.
We have 3 people using Framemaker 8 on Windows Vista Business, I'm assuming that for full Windows 7 support we should purchase Framemaker 9, however, having had a combination of CS3 and CS4 working together before I know that different versions can cause major headaches for our design team - in the case of CS it involved importing and exporting files and caused all sorts of problems. We've all on CS4 now.
So, are there any compatibility issues between 8 and 9, and is 9 the version to go for if using Windows 7?
I searched the site for quite a while (and other random Google hits) but I couldn't find anything conclusive.
Thanks in advance!

I have had no problems moving from 8 on Windows XP Pro to 9 on Windows 7
64 Professional nor in interoperating
with CS4. But my files may be much smaller than yours.
Ed

Audit and Standard Javadoc applied to all Jdeveloper project java classes

Hi,
I want to apply standard Javadoc to all the java classes I have written. Is there a quick way of doing it in 11.1.1.3
I have already done the following but the code editor rules are not getting enforced.
1) Go to 'Tools' and then choose 'Preferences
2) Go to the 'Code Editor' and under it 'Java' and then 'Javadoc'
3) Select all the tags like @author @version @param etc and modify the Tag properties to be required and then click OK
4) Next I create a new Java class but the code editor rules are not enforced.
Questions:
a) How to enforce the code editor preferences?
b) How to automatically generate the missing javadocs in the existing classes in Jdeveloper?
c) How to audit and setup a coding standard, so that it's easier to monitor what everybody in the project does and adheres to the coding guidelines.
Bottomline - Are these possible in JDeveloper 11.1.1.3
Thanks

Have a look at the JDeveloper code audit feature.
Under tools->preferences->audit->profiles
You can either modify or add a new profile and check the JavaDoc Comments rules.
You can switch the Missing Comment rule to have a more serious severity.
Then you can audit your file (or the complete project).
In the audit window you'll see an option to automatically fix error that the Audit flagged - this can include adding the missing Javadoc.

Analysing Task Audit, Data Audit and Process Flow History

Hi,
Internal Audit dept has requested a bunch of information, that we need to compile from Task Audit, Data Audit and Process Flow History logs. We do have all the info available, however not in a format that allows proper "reporting" of log information. What is the best way to handle HFM logs so that we can quickly filter and export required audit information?
We do have housekeeping in place, so the logs are partial "live" db tables, and partial purged tables that were exported to Excel to archive the historical log info.
Many Thanks.

I thought I posted this Friday, but I just noticed I never hit the 'Post Message Button', ha ha.
This info below will help you translate some of the information in the tables, etc. You could report on it from the Audit tables directly or move them to another appropriate data table for analysis later. The concensus, though I disagree, is that you will suffer performance issues if your audit tables get too big, so you want to move them periodically. You can do this using a scheduled Task, manual process, etc.
I personally just dump it to another table and report on it from there. As mentioned above, you'll need to translate some of the information as it is not 'human readable' in the database.
For instance, if I wanted to pull Metadata Load, Rules Load, Member List load, you could run a query like this. (NOTE: strAppName should be equal to the name of your application .... )
The main tricks to know at least for task audit table are figuring out how to convert times and determing which activity code corresponds to the user friendly name.
-- Declare working variables --
declare @dtStartDate as nvarchar(20)
declare @dtEndDate as nvarchar(20)
declare @strAppName as nvarchar(20)
declare @strSQL as nvarchar(4000)
-- Initialize working variables --
set @dtStartDate = '1/1/2012'
set @dtEndDate = '8/31/2012'
set @strAppName = 'YourAppNameHere'
--Get Rules Load, Metadata, Member List
set @strSQL = '
select sUserName as "User", ''Rules Load'' as Activity, cast(StartTime-2 as smalldatetime) as "Time Start",
      cast(EndTime-2 as smalldatetime) as ''Time End'', ServerName, strDescription, strModuleName
   from ' + @strAppName + '_task_audit ta, hsv_activity_users au
   where au.lUserID = ta.ActivityUserID and activitycode in (1)
        and cast(StartTime-2 as smalldatetime) between ''' + @dtStartDate + ''' and ''' + @dtEndDate + '''
union all
select sUserName as "User", ''Metadata Load'' as Activity, cast(StartTime-2 as smalldatetime) as "Time Start",
      cast(EndTime-2 as smalldatetime) as ''Time End'', ServerName, strDescription, strModuleName
   from ' + @strAppName + '_task_audit ta, hsv_activity_users au
   where au.lUserID = ta.ActivityUserID and activitycode in (21)
        and cast(StartTime-2 as smalldatetime) between ''' + @dtStartDate + ''' and ''' + @dtEndDate + '''
union all
select sUserName as "User", ''Memberlist Load'' as Activity, cast(StartTime-2 as smalldatetime) as "Time Start",
      cast(EndTime-2 as smalldatetime) as ''Time End'', ServerName, strDescription, strModuleName
   from ' + @strAppName + '_task_audit ta, hsv_activity_users au
   where au.lUserID = ta.ActivityUserID and activitycode in (23)
        and cast(StartTime-2 as smalldatetime) between ''' + @dtStartDate + ''' and ''' + @dtEndDate + ''''
exec sp_executesql @strSQLIn regards to activity codes, here's a quick breakdown on those ....
ActivityID     ActivityName
0     Idle
1     Rules Load
2     Rules Scan
3     Rules Extract
4     Consolidation
5     Chart Logic
6     Translation
7     Custom Logic
8     Allocate
9     Data Load
10     Data Extract
11     Data Extract via HAL
12     Data Entry
13     Data Retrieval
14     Data Clear
15     Data Copy
16     Journal Entry
17     Journal Retrieval
18     Journal Posting
19     Journal Unposting
20     Journal Template Entry
21     Metadata Load
22     Metadata Extract
23     Member List Load
24     Member List Scan
25     Member List Extract
26     Security Load
27     Security Scan
28     Security Extract
29     Logon
30     Logon Failure
31     Logoff
32     External
33     Metadata Scan
34     Data Scan
35     Extended Analytics Export
36     Extended Analytics Schema Delete
37     Transactions Load
38     Transactions Extract
39     Document Attachments
40     Document Detachments
41     Create Transactions
42     Edit Transactions
43     Delete Transactions
44     Post Transactions
45     Unpost Transactions
46     Delete Invalid Records
47     Data Audit Purged
48     Task Audit Purged
49     Post All Transactions
50     Unpost All Transactions
51     Delete All Transactions
52     Unmatch All Transactions
53     Auto Match by ID
54     Auto Match by Account
55     Intercompany Matching Report by ID
56     Intercompany Matching Report by Acct
57     Intercompany Transaction Report
58     Manual Match
59     Unmatch Selected
60     Manage IC Periods
61     Lock/Unlock IC Entities
62     Manage IC Reason Codes
63     Null

Auditing and restricting 3rd party vendor access for compliance and sec purposes

There are two products out there that I am looking into for managing 3rd party vendor access to our systems. The first one is Bomgar's Embassy. I'm not too sure if it's a separate product from their standard remote support products or just an added feature. Also I am aware that Bomgar's licensing can be pretty pricey.The second product I was looking into is called SecureLink. It seems to have all of the bases covered in terms of auditing and restricting but there are not a whole lot of reviews of the product or live demonstrations of it. Even the video on their site shows XP screens so I'm fearful that the product development has been halted.If anyone has any experience with these products or others I would be very interested to hear what you have to say.
For anyone that's curious, what we are currently doing is just policy based. No...
This topic first appeared in the Spiceworks Community

There are two products out there that I am looking into for managing 3rd party vendor access to our systems. The first one is Bomgar's Embassy. I'm not too sure if it's a separate product from their standard remote support products or just an added feature. Also I am aware that Bomgar's licensing can be pretty pricey.The second product I was looking into is called SecureLink. It seems to have all of the bases covered in terms of auditing and restricting but there are not a whole lot of reviews of the product or live demonstrations of it. Even the video on their site shows XP screens so I'm fearful that the product development has been halted.If anyone has any experience with these products or others I would be very interested to hear what you have to say.
For anyone that's curious, what we are currently doing is just policy based. No...
This topic first appeared in the Spiceworks Community

Compatibility betw Soundbooth/Audition and Nero

Similar Messages

Maybe you are looking for