Compatibility Between Audigy 2 Drive and Audigy 2 ZS GAMER C

Greetings,
I had a question about compatibility between an Audigy 2 Dri've and an Audigy 2 ZS Card.
Specifically, the Sound Blaster Audigy 2 Platinum Sound Card and the Sound Blaster Audigy2 ZS GAMER Edition Sound Card (SB0350).
Is the Audigy2 ZS GAMER Sound Card compatible with the Audigy 2 Platinum Dri've?
If this particular question has already been addressed in another thread, my apologies.
Thanks,
Benwajones

I searched (on "external" and "bay," but not "dri've" before I posted) but did not see this message. Is the reverse possible - that is a Audigy original dri've and an Audigy 2ZS sound card?

Similar Messages

Compatibility between Java crypto and open ssl

Hello
I have some question about compatibility between java crypto and openssl library.
This is my case:
1.I created DESede key and stored it to file:
SecretKey key = KeyGenerator.getInstance("TripleDES").generateKey();
File f = new File("c:\\key.dat");
DataOutputStream dos =new DataOutputStream(new FileOutputStream(f));
dos.write(key.getEncoded());
dos3.close();2.I encrypt some file "c:\\normal.dat" through:
ecipher.init(Cipher.ENCRYPT_MODE, key2);
byte[] enc = ecipher.doFinal(normalData);
File f2 = new File("c:\\enc.dat");
DataOutputStream dos =new DataOutputStream(new FileOutputStream(f2));
dos.write(enc);
dos.close();

You have carefully left out some critical java code, namely the Cipher.getInstance() method. You'll notice in the documentation for this method that there 3 components to the "transform" argument of this method, the algorithm, the mode, and the padding. All of these must match exactly with the what openssl is using. Furthermore, if you are using one of the modes which require an IV, like CBC mode, then this must match exactly too. If you don't explicitly specify some of these parameters, you might get default values supplied. It is up to you to find out what these are.

Communication between a driver and application.

Communication between a driver and application.
I am writing a driver for a PCI card. I have found very good examples of how the driver should be build.
Where do I find the information about how the user mode application should be talking the driver.
So If you have any idea that will help me, please let me know.

Hi,Sir
This for your reference.
It will create pci adapter device node at /devices .
You can use AP function call ioctl to Communicate with your device driver.
static int
xxattach(dev_info_t *dip, ddi_attach_cmd_t cmd)
int instance = ddi_get_instance(dip);
switch (cmd) {
case DDI_ATTACH:
allocate a state structure and initialize it.
map the device�s registers.
add the device driver�s interrupt handler(s).
initialize any mutexes and condition variables.
create power manageable components.
* Create the device�s minor node. Note that the node_type
* argument is set to DDI_NT_TAPE.
if (ddi_create_minor_node(dip, "minor_name", S_IFCHR,
instance, DDI_NT_TAPE, 0) == DDI_FAILURE) {
free resources allocated so far.
/* Remove any previously allocated minor nodes */
ddi_remove_minor_node(dip, NULL);
return (DDI_FAILURE);
* Create driver properties like "Size." Use "Size"
* instead of "size" to ensure the property works
* for large bytecounts.
xsp->Size = size of device in bytes;
maj_number = ddi_driver_major(dip);
if (ddi_prop_update_int64(makedevice(maj_number, instance),
dip, "Size", xsp->Size) != DDI_PROP_SUCCESS) {
cmn_err(CE_CONT, "%s: cannot create Size property\n",
ddi_get_name(dip));
free resources allocated so far
return (DDI_FAILURE);

I like ti known about compatibility between Windows 8 and iTunes

I like ti known about compatibility between Windows 8 and iTunes

It works for some and not for others.
At this time, there is no publicly available version of iTunes that is supported on Windows 8.
Only Apple knows when that will change.

SSRS 2012 ERROR [IM014] [Microsoft][ODBC Driver Manager] The specified DSN contains an architecture mismatch between the Driver and Application

I have a SSRS installation, I have deployed my connections to, but they fail with title message. The drivers and ODBC on the box are setup and work fine with 32 bit ODBC conn manager.
When I run or configure my connections on the site, via the browser, I get errors connecting.
I tried to find which app pool http://server/ReportServer application used, but I am not finding that, so my first ?
How do I find in IIS what app pool SSRS application is using?
I have 2008 server, running SQL 2012 V.S. 2010 and I think I need to enable my app pool to use 32 bit, but cannot figure out which one it uses? I see default set to 32 bit = true, which I thought would be it.
Can I set my SSRS project to use x86, platform? Like I did with SSIS?
If so, how? SSRS and SQL 2012 somewhat new for me. Thanks
Developer MS Reporting Services

Hi DCady,
To manage a data source that connects to a 32-bit driver under 64-bit platform, we use C:\Windows\SysWOW64\odbcad32.exe. To manage a data source that connects to a 64-bit driver, we use C:\Windows\System32\odbcad32.exe.
Generally, if we use the 64-bit odbcad32.exe (C:\Windows\System32\odbcad32.exe) to configure or remove a DSN that connects to a 32-bit driver, for example, Driver do Microsoft Access (*.mdb), we will receive the following error message:
The specified DSN contains an architecture mismatch between the Driver and Application
To resolve this error, we need to use the 32-bit odbcad32.exe (C:\Windows\SysWOW64\odbacad32.exe) to configure or remove the DSN.
Besides, please make sure there are no DSN using the same name in both 64-bit and 32-bit ODBC Data Source Administrator.
Reference:
Managing Data Sources
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Compatibility between 32 bit and 64 bit of TimesTen

Hi All,
Please tell me is there any document avialable to see compatibility between 32 bit and 64 bit of TimesTen ?
Regards
Pratheej

Hi Pratheej,
1. You cannot replicate between 32 and 64 bit TimesTen.
2. For direct mode connections, the application must be the same 'bittedness' as TimesTen 932-bit app -> 32-bit TT, 64-bit app to 64-bit TT).
3. For client/server connections a 32-bit app can work with both 32 and 64 bit TT. A 64-bit app can only use 64-bit TT.
If you want to deploy a 32-bit app using 64-bit TT on the same machine we have an optimised shared memory client/server connection (shmipc) mode. This is much faster than TCP or Unix sockets but is still much slower than direct mode.
HTH,
Chris

Architecture mismatch between ODBC driver and application

Hi,
I have Windows 2008 server R2 OS which is 64 bit OS. I have created an SQL Server ODBC connections for my CMC database. I am trying to install Crystal Reports Server 2008 V1 SP3 but I am getting this "architecture mismatch between ODBC driver and application" error while choosing the ODBC datasource for CMS.
I thought CRS 2008 version would easly be installed on Windows 2008 server as it mentioned on the installation guide.
How do I resolve this issue?

Moved to BOE Admin forum.
CRS 2008 is a 32 bit app so all attachments, Printers, DB clients, etc. must all be 32 bit or support 32 bit applications.
Use the 32 ODBC administrator in \windows\syswow64 folder.
Thank you
Don

Sync between Memory Drive and PC wihout using cloud service

I want to sync between Memory Drive (SD Card) and PC.
I do not want to use any cloud service.
i did not find blackberry link doing the job. It just copies files on either direction, depend where we invoked the command.
i am ok to manual sync only when connected to PC by cable. I do not expect any sync on WiFi or over internet.
Any idea, how can we do it.
Solved!
Go to Solution.

Another option i used is access SD card over WiFi, first we need to enable WiFi Access from media storate option.
Then map SD card as a drive on PC.
Default userid is \Blackberry and password is whatever we set.
Then right click and select make always available offline.

N91 splitting messages between hard drive and inte...

Hello.
I have a lot of messages that were taking up a lot of space on the internal memory and making the phone perform sluggishly. So under Messaging > Settings > Other > Save messages, I set it to save them on the N91. However, I feel it might not be so efficient du to the hard drive usage, as I also have several mailboxes set up which I regularly check hence increased drive usage = low batery.
However, if I then change the option to use the internal memory, messages are saved to the new location but my existing messages/mailboxes become inaccessible.
My question is, how can I move just, say my mailboxes and thlast wee or so worth of messages to internal memory, have that used for new messages, have the older ones saved on the hard drive but still have them accessible to me?
Thanks.
H.
Hussein Patwa
PatwaNet
Nokia 6630 on 3G (UK)
Nokia 6610i - UNLOCKED! YAY!
Currently looking for more cheap & new handsets - you never know when a spare can come in handy!

Ah thanks, but that is a shame. I do of course try to keep the numbers down, but due to circumstances I have to keep records of all correspondence (it's saved me several times already).
I do find it odd though that once you've changed the location of messages you can't see the ones in the original location even though they are still present. Is there no app or hack that can allow me to at leave move messages between the locations (and more importantly my mailboxes) to the internal memory? I suppose I could leave with changing the storage setting if I needed to look at older messages on the hard drive, but having to re-setup all the mxilboxes just because they become 'hidden' is a real pain.
Thanks again.
H.
Hussein Patwa
PatwaNet
Nokia 6630 on 3G (UK)
Nokia 6610i - UNLOCKED! YAY!
Currently looking for more cheap & new handsets - you never know when a spare can come in handy!

Difference between IVI driver and VXI PnP Driver

There are two type of Instrument Drivers for the same instrument, i.e. IVI Driver and VXI PnP Driver. I want to know what is really the difference between these two and on what conditions which one is better than other?
Thanks in Advance

Hi M.Jonathan,
both driver are a HW abstraction.
The IVI driver bases on the idea that a class of instruments (DMM, Scope, ...) support the same functionality. When changing an instrument you normaly have a different command set for these instruments. You have to modify your code. With the IVI layer, all instruments supports the same functions. The communication is done by IVI and driver layer.
In the description of the VXI PnP Driver. The VXI PnP is VISA based. The idea of VISA is having one API for all instrumentation buses. Based on VISA VXI PnP provides a pool of functions for instruments including GUIs.
'on what conditions which one is better than other' The first question should be: Is there a driver available. Any other reasons depend on the application.
Hope, this helps.
Philipp
AE | NI-Germany

Connection key compatibility between Contribute 3 and 4

Does anyone know whether Contribute connection keys are
compatible between versions 3 and 4?
Can I create a connection key in Contribute 3 for a version 4
client or vice versa?
At the moment, I have several customers who may be on
different versions of Contribute and want me to handle the
connection key side of things, so I need to ensure that the keys I
create will work in either version.

For windows users can you create a connection key in Windows machine and send the same.

Export/import compatibility between 2.0 and 2.2

If I upgrade my development environment to Apex 2.2 whenever it is released, can I export apps/pages from there and import into a Apex 2.0 environment?
Both export files have the following in them.
-- This date identifies the minimum HTML DB version required to import this file.
wwv_flow_api.set_version(p_version_yyyy_mm_dd=>'2005.05.01');So I guess the answer is yes, but I don't want to make any assumptions that would prevent me from deploying new/changed functionality into my existing 2.0 Production environment.
Can someone from Oracle comment on this?
Thanks

Vikas,
Yes, in most cases that will work just fine. There are two options on the application export page that would make it so you can't import your application in APEX 2.0, "Export Deployment Attributes" and "Export Comments". Selecting either of those will include metadata in the export which wasn't around in 2.0, so they affect the import compatibility.
Otherwise, apps and pages should be compatible with 2.0.
- Marco

Differences between live 24bit and audigy se?

hi!
anyone knows whats the exact differences between the creative soundblaster live 24bit (found in the k8n diamond and p4n diamond) and creative soundblaster audigy se (found in k8n diamond plus)? the chipsets seems to be identical among each other. the specs are also identical.
pls advise.

Quote from: alg7_munif on 29-July-06, 04:00:10
Why my device control on my K8N Diamond plus did not have the decoder tab?
Maybe that's why I can't get 5.1 sound from my digital speaker...
https://forum-en.msi.com/index.php?topic=99326.0
Looks like you don't have the right software drivers installed. Instead of the nVIDIA Audio drivers, you should be installing the Creative Labs drivers from the enclosed driver CD-ROM, the separate one from the MSI disk. Next go to Creatives site and run all the updates from their Auto-update service.
You should be able to select the tab shown above as I also see it. Each selection also works for me so I can say that the Dolby decoding does work.

Differences between audigy 4 and audigy 4

Hi. I am in position to buy Audigy 4 bulk version (non pro). I would like to know If there are any other differences besides extended box, especially if DACs are the same (CS4382 or CS 4398?). Thanks in advance

Audigy4 is in fact an Audigy2 Value with the firmware modified to report Audigy4. Is a very big difference compared to Audigy4 Pro.
The DAC's are lower quality than the Pro version, the digital jack is different, no other goodies (fireware, AD_EXT connector for adding an audio bay latter)...

Audigy 4 and Audigy 2 ZS? Differen

What exactly is the difference between the Audigy 2ZS regular and the Audigy 4 regular?
I have been looking at both cards but I can't figure out which one is better.... The only difference I see is that the Audigy 4 says that it has hardware acceleration so your cpu isn't used as much meaning better fps in games...... Is the Audigy 4 better? Confused about the difference!
Thankyou

There is no real difference to speak of. The Audigy 4 is just a slightly tweaked version of the Audigy 2 ZS. It has a higher signal-to-noise rating (4dB compared to the A2 ZS's 08dB). I have the Audigy 2 ZS Platinum and I am very pleased with it. I didn't even blink when the Audigy 4 was released.
As to gaming either card will serve you well. If, however, you want to record and edit music then the Audigy 4 is better suited.

Compatibility Between Audigy 2 Drive and Audigy 2 ZS GAMER C

Similar Messages

Maybe you are looking for