Compatibility between D-Link wireline adaptor and Asoka wireline adaptor

WiFi coverage in my house was just plain awful with the old 2Wire gateway, no signal strength outside of the room the gateway is in. Better signal strength from my neioghbour's house! Bought a D-Link wireline adaptor pair and that fixed one connection problem. A recent problem had AT&T replace the old 2EWire unit with a Arris NVG589 gateway. Slightly better reception around the house, but not stunning in a couple of rooms. Technician left me with a pair of Asoka wireline adaptors to help solve my bad reception problem. Plug and Play they aren't. I cannot find the magic for them to connect with my D-Link adaptors. Any suggestions? ThanksPeter

ATT tech replaced the gateway with a brand new system. Admitted I seem to have a dead spot when it comes to wireless internet in one room - remote TV box in that room seems to work fine. I have a D-Link wireline adaptor set up between my gateway and the bedroom - works find for my son's Playstation. Tried to add the ASOKA adaptor into that "network" doesn't seem to be compatible with the D-Link.I'll have another try - the box teh ASOKA adaptors came in didn't have any instructions, so I may be doing something wrong. More research, it seems

Similar Messages

File compatibility between CS 5.5 MAC and CS 5.5 PC?

We are currently a PC based shop with a few MAC's tossed here and there. I have been asked to verify the file compatibility between CS 5.5 MAC and CS 5.5 PC. Are the files fully compatible? i.e. can user A on a PC create an illustrator/photoshop/etc document which is then opened by user B on a MAC with no issues?
Thanks!

Yes. For the programs you mentioned it has been forever this way and even for programs like Premiere Pro or Encore, that were platform-specific until recently, this is no longer an issue ever since CS5. Of course you will still have to take care of different handling for file paths on different platforms for externally linked files, but that's a different matter and nothing specific to Adobe...
Mylenium

Still no compatibility between Storage Client Library v3 and emulator?

Hi,
According to this blog post:
I'm apparently unable to post a link, but here's the text from the blog. I'm sure you can find it via google if interested.)
<<<<
Storage Emulator Guidance
As mentioned above an updated Windows Azure Storage Emulator is expected to ship with full support of these new features in the next couple of months. Users attempting to develop against the current version of the Storage emulator will receive Bad Request
errors as the protocol version (2013-08-15) is unsupported. Until then, users wanting to use the new features would need to develop and test against a Windows Azure Storage Account to leverage the 2013-08-15 REST version.
>>>>
So it seems there was not compatibility between the storage emulator and Storage Client Library v3. I'm wondering if that is still the case. I get a 400 error when calling container.CreateIfNotExists() when pointing to local storage, but no problem pointing
to production storage. I'm using SCL v3.0.2.
Thanks...
-Ben

Hi,
Please see
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/c961d0df-e6ab-4563-958c-b3646ee2cd9d/the-value-for-one-of-the-http-headers-is-not-in-the-correct-format?forum=windowsazuredevelopment#16892f11-498d-4975-aa4b-adfa12b03fea
Here is a snippet of this thread.
Storage Emulator 2.2 is currently incompatible with Storage Client Library 3.0.0.0. This has been mentioned in Storage Team Blob as well:
http://blogs.msdn.com/b/windowsazurestorage/archive/2013/11/27/windows-azure-storage-release-introducing-cors-json-minute-metrics-and-more.aspx (Please
read "Storage Emulator Guidance" section towards the end of the post).
It may be fixed in the next version.
Hope this helps
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Wireless connection between D-Link WiFi router and Time capsule stopped working

We have an ISP provided D-Link wireless router (DIR-615) to which we wirelessly connected our 2Tb Time Capsule for back up and to connect a USB printer to out network. This worked perfectly for 3 1/2 years, until about a month ago, when the time capsule suddenly decided to go "off line". ie we could no longer access it or the printer via our wireless network. We had changed nothing - just one day it stopped working.
We tried to get it back online with no success. As the 2Tb Time Capsule was almost 7 years old and had had some HDD issues in the passed, we figured it had got old and died and that it was time to replace it; so we bought a new 3Tb Time Capsule, thinking this would get everything back to normal.
However much as we tried, we were also unable to get the new 3Tb Time Capsule to connect wirelessly to the D-Link wireless router. The Airport Utility did not show the D-Link wireless router or its wireless network, although we were (and are) able to see it in Systems Preferences>Networks from all our multiple devises. This in itself seemed odd. No matter what we tried, the Airport Utility would not find the D-Link wireless router and hence we could not add the 3Tb Time Capsule to the existing wireless network.
At the end of the day we got fed up with trying to add the 3Tb Time Capsule to the D-Link wireless network, and connected it via a LAN cable to the D-Link router instead. We then set it up as its own network. Worked gerat. Having done that we thought maybe the old 2Tb Time Capsule might not have been the problem after all, so we tried extending our new 3Tb Time Capsule wireless network using the 2Tb Time Capsule wirelessly. This worked perfectly! And we are now almost back to what we wanted.
So although we have a work around, this means now have 2 separate wireless networks as opposed to the original single wireless network where everything talked to everything else.
Can anyone shed any light on any of the following:-
1. Why the original wireless network connection between the D-Link router and the 2Tb Time Capsule just stopped working? Was there some software change from Apple that "decided" D-Link wireless routers were no longer secure; and therefore the TCs could no longer connect to them?
2. Why it was not possible to extend the existing D-Link wireless network using the the new 3Tb Time Capsule?
3. Is there is anyway that we can get back to a single wireless network based around the D-Link wireless router as the primary router connecting to the modem, where the 2 Time Capsules connect as "wireless satellite base stations"?

1. Why the original wireless network connection between the D-Link router and the 2Tb Time Capsule just stopped working? Was there some software change from Apple that "decided" D-Link wireless routers were no longer secure; and therefore the TCs could no longer connect to them?
A firmware update to the TC came along and you agreed to it without perhaps even noticing.. it then smashed your setup because Apple do not recommend the setup you were using and it is very poor.
2. Why it was not possible to extend the existing D-Link wireless network using the the new 3Tb Time Capsule?
Because it is such a poor setup that Apple have taken away your ability to choose it unless you know exactly what you are doing.
3. Is there is anyway that we can get back to a single wireless network based around the D-Link wireless router as the primary router connecting to the modem, where the 2 Time Capsules connect as "wireless satellite base stations"?
Yes, this I can help you with.
I have several ways around the problem.. but the first one is.. why use the DIR-615 at all.. it is not a modem.. it is a very ordinary bottom end, poor single band slow wireless router.
Why don't you simply remove the DIR-615 from the network completely.. plug whatever it is the ISP supplies you.. an ethernet connection from whatever that modem is you mentioned into the WAN port of the Time Capsule. And use the TC in some router mode.. same as the DIR-615 was setup.. dhcp or pppoe or whatever.. I doubt the TC cannot match it.
If you have issues please post a few screenshots from the DIR-615 to show how it is setup from the WAN side.. and as long as you are given the username and password or whatever the ISP uses to authenticate then chuck out the DIR-615.
Tell me if that is a goer.. if not we can work out a few other methods..
eg. Simply turn off the wireless in the DIR-615. It is poor cf the TC and there is no need for it.. with the TC in bridge only use the TC for wireless as well as wireless extend with your old TC.
Or setup roaming network where everything uses the same SSID.
Then you will have one wireless network. And it won't matter what as long as it connects.. although IMHO this is not right as the TC is such a superior router now you are wasting your new TC.

Can anyone tell me the compatability between macbook pro running lion and the kindle touch?

I originally wanted an Ipad, but when I already have a macbook pro, and an android phone, planning to upgrade to an iphone when I qualifiy for one, I could not see paying the money for an ipad when between my computer and phone I have all the capabilities covered. However, being a college student who uses pdf files of textbooks a lot, sometimes pulling out my laptop every time I want to look some little thing up in a textbook gets old. And carrying all my engineering textbooks everywhere is going to kill my back one of these days. So I want a cost friendy e-reader or tablet. Ive heard good things about kindles. But what is the compatibility like for a mac? will it be a pain in the but like my android?

Get an iPad. Once you have that, you may not really need to spend the money on an iPhone, since the iPad will do everything the iPhone does (and be easier to see doing it) except make phone calls, and even an Android phone can do that.

Compatibility between R/3 4.6c and BI 7.0

Hello,
First of all, I want to stress out that I just spent hours reading SDN and service marketplace, and I just couldn't find a precise answer, so that's why I ask you this ..
we have SAP R/3 4.6c, SP 23, no BW sofar.
We plan to have BI 7.0, and I have been asked to which SP level we had to be in SAP R/3.
I understand that we have to get the right PI version ( PI 2004.1 SP10 if I'm right ?), but what about the SP level of SAP R/3 itself ??
Thank ou very much if you can help.

Hi Andreas,
Thank you for your quick answer !
In fact I had already read this thread...So I did the 'R/3' search, and read it all.
But now maybe I am a little bit more stupid than I thought, because when I read the compatibility matrix between SAP R/3 SP level and netweaver here :
https://websmp109.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000653817&
I just don't understand:" PI 2004.1, with R/3 SP01 (??) and R/3 plug-in SP10 "
So all I understand is I must have the 2004.1 plug-in with SP10 on my SAP R/3 4.6c system..am I right ?
Thanks again

Compatibility between Sun C++ 5.1 and Sun C++ 5.2

Is it possible to create with Sun C++ 5.1 a shared library refering symbols from other libraries created with Sun C++ 5.2 ?

There should be no problem linking 5.1 to 5.2 objects. In fact 5.0, 5.1, 5.2 and 5.3 objects
are all compatible. Note this does not apply to debug binaries. Debug objects are compatible but
the information changed between releases. The latest version of dbx should be used in a mixed
environment.
Alan
Sun Developer Technical Support

ITunes compatibility between OSX 10.6.8 and iOS 7.1.2?

I recently got a new iPhone 5S and was trying to sync it with the iTunes library on my (admittedly old) late '08 MacBook (Apple spec page). However, when plugging my phone into the laptop, I received an error message which read "iTunes could not connect to the iPhone "[my device name]" because the device timed out."
Simply syncing from the cloud isn't an option, as I've got a lot of music that was ripped from my physical media collection, or was created by me, and doesn't live there.
I'm running OSX 10.6.8 on my laptop, mainly because my understanding is that the newer OSX versions are RAM hogs for older machines, and that will make this computer much less useful for its original purpose (audio processing applications). Is this an insurmountable 'generation gap' between OS's, or does a solution exist? Thanks.
Processor: 2.4 GHz Intel Core 2 Duo
Memory: 4 GB 1067 MHz DDR3

https://www.google.com/search?q=itunes+sync+device+timed+out

Compatibility between SAP ECC 6.0 and LDAP

Hi,
Does the current version of SAP ECC 6.0 has any dependency on the Domain and Forest Functional Level of Active Directory?
Currently the Domain Functional Level is Windows 2000 native and the Forest Functional Level is Windows 2000.
The Domain and Forest Functional Level will be raised to Windows Server 2003.
While raising the Domain and Forest Functionality level to Windows 2003 provides additional features and capabilities as far as Active Directory enhancement it does not cause any issues with the application as such.
It will be a good idea to confirm from SAP if there are any dependencies on this.
Please do let me know if you need more information or any help from me.
Thanks,
Saurabh

Hello,
It is good to get on to the win 2003
Read the SAP Note and refer the microsoft support link for further info:
1377424 - Information on Active Directory domains and trusts
http://support.microsoft.com/kb/310996
Regards,
Sai R.

Compatibility between tag names in Professional and Binding in Designer

Q: Is there a way to get the same 'recognition' Acrobat Professional uses in their object/tag names to match up with an object name set in Designer?
We have tried naming the objects in an xdp/pdf using Designer, but without the same results as if these objects were named in Acrobat Professional.
History: Currently we use Designer 7.0 to build XDP's of our forms (350+) to run on FormServer. Many fields on each of these forms 'prefill' with advisor/client information from settings in the Binding tab. These forms are then stitched together to make on large PDF.
There are approximately 30 of these forms that are also used/shared in another 'forms tool' that uses the tag names set through Acrobat Professional. Professional doesn't allow us to do any 'Advanced Editing' if the form was designed in Designer.
So...,
Our process for these (30) forms is to [1]build the forms in Designer (since we need the XDP for other apps), [2]'dumb' the form down page by page in Illustrator, [3]merge these individual pdf's back into one pdf through Professional, [4]and then proceed with the interactivity. (!whew!)
With this process, we can [5]then add in tag names to each object that needs prefilling by the other system and finish the form.
Not too bad for 30 forms - but we are now looking to inherit 300+ more forms.

Conversion is strictly necessary and irreversible between the latest version of Power Pivot for Excel 2010, and Power Pivot in Excel 2013 (365 or disc - Pro Plus). Once converted to 2013, there is no way to open the same file again in 2010.
If you do not have the latest version of Power Pivot for Excel 2010, I believe you will need to upgrade that, then use that to open an older Excel 2010 workbook, then open in 2013 to upconvert.
If you have users on multiple versions of Excel, SharePoint is your best bet for sharing a Power Pivot workbook.
If you have users on multiple versions of Excel who must collaborate on building a workbook, you've got some installations, VMs, or spare laptops coming your way.

Compatibility between Oracle 8.1.7 and HP UX 11iV2 (11.23)

Dear,
We need to know if Oracle version 8i (8.1.7.4) is compatible with the version of HP UX 11iV2 (11.23) installed on a HP superdome.
This is quite urgent because we replace the server where the DB runs by another.
Is there a document with the compatibility ?
Do we need to install Oracle 8i 64 bits ?
Thank you in advance,
Xavier

if Oracle version 8i (8.1.7.4) is compatible with the version of HP UX 11iV2 (11.23) Desupported configuration. 
 
Is there a document with the compatibility ? 
Oracle's Certification Matrices 
 
Nicolas.

Project File Compatibility between Final Cut Pro 6 and 7?

I have a group of three editors who are on Final Cut 6 while I am on 7. Is there any way to be able to share project files with Proxi's back and fourth?
Thanks...

What would be the best way then to have a group of editors work on the same project that is on Final Cut 7 but with some editors only able to work on Final Cut 6?
Thanks as always.

Compatability between Roboform 6.10.2 and Firefox 4.0?

Installed the latest 4.0 version of Firefox, and Roboform version 6.10.2 wouldn't work properly with it. When I clicked on the Roboform toolbar, instead of bringing down the toolbar menu, the web page for the latest version 7 of Roboform came up in Firefox.
Had been using Roboform version 6.10.2 with version 3.6.1.6 of Firefox for many years, and everything did work perfectly, so uninstalled Firefox 4.0 and then reinstalled Firefox 3.6.1.6 and Roboform then worked properly again.
My question is: does the new version 4 of Firefox work with the previous version 6.10.2 of Roboform, or is it necessary to update my Roboform to version 7 so that the two will work together?
Thank You,
Rick

Roboform expects their users to update to version 7 for Firefox 4.0 support.

Adobe Flash IDE: Migration/Compatibility issues between Adobe Flash Professional CS3 and CS5

Hi,
Adobe Flash IDE: Adobe Flash CS3 Professional and Adobe Flash Professional CS5
I am facing some migration/compatibility issues between Adobe Flash CS3 Professional and Adobe Flash Professional CS5:
I am working on a project that has been completely developed in CS3 earlier. When I am using CS5 (Flash Player 9 / Flash Player 10) to compile the FLA files, it is creating some new issues like some customized radio buttons are getting disappeared while viewing the SWF on a web page etc.
So, I would like to know:
1) Is there any migration/compatibility issue between Adobe Flash CS3 Professional and Adobe Flash Professional CS5?
2) If yes: Is there any patch available from Adobe for it?
3) If no: What could be the causes and the best possible solutions for it?
Any help and support would be highly appreciated. Many thanks in advance!
Thanks & Regards
Amit

Apparently some people have issues, but I don't think it is across the board. Here's a link to another recent posting that may or may not prove helpful to you...
http://forums.adobe.com/thread/776615?tstart=60

Difference between healthcare adaptor and b2b adaptor

Hi
What is the difference between healthcare adaptor and b2b adaptor ? which one to be used and why

B2B enables an enterprise to define, configure, manage, and monitor the exchange of information, electronically, with its trading partners or between different departments.
You can refer below link for more information :
http://www.oracle.com/technology/products/integration/b2b/pdf/DS_Oracle_Integration_B2B_1012_FNL.pdf
B2B supports various range of standards from the different fields like healthcare, retails etc.
Oracle B2B offers HL7, HIPPA , NCPDP and many other health care protocols along with the EDI, PFF ,RossettaNet etc.
For more information , you can refer :
http://www.oracle.com/technology/products/integration/b2b/pdf/DS_Oracle_Integration_B2B_for_Healthcare_1012_FNL.pdf
http://www.b2bgurus.com/
Just drop a mail([email protected]) if you need more input or contact support/PM
Edited by: Nitesh Jain on Nov 18, 2009 11:08 AM

Compatibility between D-Link wireline adaptor and Asoka wireline adaptor

Similar Messages

Maybe you are looking for