Compatibility between ECC 6.0 EHP4/NW 7.01 and other NW system

Our system landscape consists of ECC 6.0 EHP3 SPS 03 /NW 7.00 SPS 17 (Dual stack) and other Netweaver system like BI, GTS, Portal 7.0 SPS 17. We are thinking of upgrading ECC 6.0 only to EHP4 SPS08.  Will it lead to any compatbility issues with other netweaver system? are there any dependencies? Do we also need to upgrade our BI, GTS and Portal system ?
Thank you
Dhirendra

Thanks Sunny for the info. I checked  with upgrade dependency tool and it did not find any dependency.
However, according to note 1297231, SAP NW 7.0 should be at SP 22 to be compatible with EHP
6.0 EHP 4 SP08. Note 1165438 references 'hub' and 'sidecar' systems. In this case, do we need to update our "hub" and "sidecar" (BI, Portal, xRPM) systems to be at Netweaver 7.0 SP22 so that "thereby both
applications are synchronous?" The notes are not clear.
Do we need to patch our Portal, BI, and xRPM (currently at NW7.0 SP17) systems to NW7.0 SP22 as per the above notes?"
Please advise

Similar Messages

  • Compatibility between ECC 6.0 EHP4/NW 7.01 and Netweaver Portal 7.0 SP17

    Hi,
    Our system landscape consists of ECC 6.0 EHP4/NW 7.01 and Netweaver Portal 7.0 SP 14.  We are thinking of upgrading our portal to SP 17.  Will it lead to any compatbility issues with our ecc system? are there any dependencies?
    Thank you.

    Hi,
    The easiest way to know what SAP NetWeaver SPs aligns with SAP ERP/ECC SP stack or any other app's SP stack is the following:
    - logon on to http://service.sap.com/sp-stacks
    - click on the appropiate app's SP stack . SAP ERP 6.0 (SAP ERP 2005) your case as it also covers EhPs too.
    - In the resulting screen, select the ECC SP level you have (or want) and NW components you have
    - The resulting list will indicate what the NW patches you need to be in synch.
    I hope this helps,
    Mike.

  • Compatibility between ECC 6.0 EHP4/NW 7.01 and SRM 5.0

    We have ECC 6.0 SPS 03 and SRM 5.0 System with the dual stack. We are planning to upgrade ECC 6.0 only to EHP4 SPS08. Will it lead to any compatbility issues with SRM 5.0? are there any dependencies? I
    have checked the Upgrade dependency tool and it did not find any dependency. I am not able to find out any note which explain impact of upgrading ECC to EHP with SRM.  Any help will be appreciated.

    Hi,
    I don't see any problem in having SRM 5.0 with ERP 6.0 EHP4/NW 7.01. You can have a look at SAP note 963000 which shows that SRM 5.0 is released with this release also. So, I think SRM 5.0 is fine with EHP4.
    Thanks
    Sunny

  • Compatibility of ECC 5.0 to BI 7.0 and replication issues

    Hi BW Gurus,
    Implementing BW project in the BI 7.0 and the source system is ECC 5.0.  We need to extract data from ECC 5.0 to BI 7.0.
    Is it supports good compatabiility with ECC 5.0 to BI 7.0?
    During extraction can we replicate the R3 datasources as the 7.0 data sources or we dont have the option of 7.0?
    or still we have to use the 3.x functionality for R3 datasources
    Regards,
    Shahid

    when you replicate the datasource it will ask for the option while replicating whether you want 3.x or new and u can select he desired one u need.
    Ya and it is compatible.
    this should work.
    let me know if you still have any issues acheiveing it.
    regards
    assign points if useful

  • Compatability between Oracle 10g 10.2.0.3.0 and Apex 2.2

    We have an Apex application with a bunch of APEX tree objects. The data for the tree comes from a materialized view. All was fine with the older version of Oracle database (1og 10.2.0.1.0) but when we applied the patch for 10.2.0.3.0 the trees are misbehaving (there are multiple root nodes, ID's are duplicated)
    Is there any compatability issue? should we upgrade APEX to APEX2.2.1 or APEX 3.0
    Any Help appreciated.
    Thanks
    Raje.

    Raje,
    You should first apply the 2.2.1 patch. This is easy and it is not an upgrade.
    You should also test the materialized views outside of Application Express with your upgraded database.
    Also, check with Oracle Support about bugs related to MVs and 10.2.0.3.
    Scott

  • Differences between 10G intallations for vista and other windows systems

    I need Informations about how the installationfiles for vista are differing from the files to install oracle on other windows systems.
    And why can't i simply install Oracle Database 10g release 2 (10.2) for Microsoft Windows on a Windows Vista System.
    Message was edited by:
    user585666

    Because Microsoft has changed the API with Vista - the system calls that programs such as Oracle (and Symantec, Word Perfect, and so on) use to performs their operations.
    It is a strange thing indeed that things stop working when a program (such as Oracle) asks "fetch me data from disk" and the operating system says "fetch has been changed to get and I no longer respond to fetch"
    Also because Microsoft has changed the security model, and requests made by Oracle are now denied due to insufficient, or differences in, security.
    An analogy - you have a device with a plug to use in North America. Why can you not simply plug it in to the wall socket in other countries?
    The information you need should probably come from Microsoft, not Oracle.

  • Compatibility between MSI NX6600GT-VTD128 and motherboard

    Hi guys, I want to know if there's compatibility between my motherboard "MSI 875P Neo-FIS2R AGP8X" and the "MSI NX6600GT-VTD128" because I want to buy this Video Card but my doubt is about the compatibility or maybe some errors, and I have a 400W Power Supply.. that's ok for this video card?... thnx !!!

    hi, how are you.
    wel there are no cmpatibility issue with this motherboard and the video card... or i am not notify about...
    but do you have to give "us" (all posiblle reply) more info about your pc, anyway the only limitation about it's the slot used, that motherboard uses agp8x and you have to buy a 6600vtd agp 8x, because thera are one model pci express that's all
    the power issue: not a issue realy 400w power source are just enough
    th real monster are hte 6800 family that need  470w or something like that to work fine
    ok i hope  best to you and your newer card, and tellme how works this magnificent piece of technological art(in middle rank) and the capture feature with onchip video processor
    byee!!  

  • Diffrence between core 2 due T and other like SP,P,SL

    Hello
       Can anyone clear me the difference between core2due processors come with T8400 to T9600 and other
    P--,SP and SL
    Thanks

    welcome to the forum!
    you may find the lenovo processor reference helpful.
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • Upgrade SAP from ECC 6.0 EHP4 to ECC 6.0 EHP7

    Dear all,
    We are using ECC 6 ERP 4 SP5 with oracle 10.2g and Netweaver 7.0 EHP1.
    Other system release
    CRM 7.0 SP5 & CRM JAVA Release – NW 701 SP3
    BI Release – NW 701 SP5 BI CONT 7.04 & BI JAVA Release – NW 701 SP3
    We are planning to upgrade ECC 6 ERP4 SP5 to ERP 6 ERP7 SP1, Could you please suggest for compatibility version for CRM & BI with ECC6 EHP7
    And any document for EHP7 up gradation procedure and what is the impact or change made in system after upgrade from EHP4 to EHP7
    Regards,
    Ajay

    Hello
    The nightmare is going on... this point has been discussed a year ago (Re: Comapatability between EHP7 and SAP Netweaver BI 7.0 EHP1) and the conclusion was that you only need to upgrade HUB satellite systems... and a BW system is not an HUB.
    The only possible issue would be if the java stack of the BW system is used directly by the ECC system.
    Did not find any information on the necessity to upgrade the CRM, so I think you should keep it as it is.
    This are even getting worst because sometime sap support (OSS) are not able to provide clear answers (Interoperability btw ERP 6.0 EhP7 and SAP NW/BW 7.0)
    Best regards
    Strategy beyond SAP Business Suite 7 Innovations 2011 - Landscape Governance - SCN Wiki
    1388258 - Version Interoperability within the SAP Business Suite
    In order to use the new JAVA EE 5 capabilities and benefit from the improvements of SAP NW 7.3 the version interoperability range has been moved upwards for SAP Business Suite core applications with Release to Customer (RTC) from 2013 onwards.
    This means that SAP NetWeaver Systems 7.30 or higher are required if SAP Business Suite applications are based on or operating with those central Systems (Enterprise Portal, Business Warehouse, Process Integration).
    Customers wishing to utilize SAP Business Suite applications with RTC from 2013 onwards, that require one of these central SAP NetWeaver Systems, will have to upgrade their central NetWeaver Systems to 7.30 or higher before upgrading e.g. to SAP Enhancement Package 7 for SAP ERP 6.0.

  • Configure ECC 6.0 EHP4 in SAP Solution Manager SP15

    Hi all,
    I just upgrade a system from R/3 4.6c to SAP ECC 6.0 EHP4 NW 7.01. I want to configure the system in SAP Solution Manager just upgraded to SP15. But I don't understand how I must to configure the system and to assign a logical component. It seems not to be the same possibilities between System configuration and Logical configuration.
    For system configuration I can choose product version EHP4 FOR SAP ERP 6.0 / NW7.01 and a full list of usage type
    For logical component I only found product SAP ERP ENHANCE PACKAGE and a very short list of version and usage type (??)
    Is someone know if it is normal or if it is necessary to patch solution manager ?
    Is ther a documentation existing to configure ERP EHP4 systems ??
    Thanks for your answer.
    Regards
    Gerard

    I have not seen any document to configure EHP4 systems specfically.
    I do not think, Solman SP15 should create any problem in that. But, since you are upgrading your landscape to EHP4, so why leave solman to SP15 instead of Ehp1 (SP18/19/20)...
    You might want to have a glance over some notes
    Note 1283307 - SMSY: Product version cannot be determined correctly
    Note 1301106 - SMSY: Enhancements and errors in Enhancement Package 1
    Note 1320545 - Updating the product version in SMSY

  • Compatibility between SAP ERP upgrade with SAP PI 7.3 sp12

    Hi Experts,
    Our SAP ERP system getting upgraded to ECC 6.0, ehp 7, SS7 and we need to check its compatibility with the current SAP PI version(7.3 sp09) and its future upgraded version which is sp12.
    Would any one kindly help me to track the PI system compatibility with the ERP upgraded version and its adverse effect(if any) on interfaces between PI and ECC system?
    Thanks
    Navneet.

    Hi Navneet
    If your PI is already on 7.3, it is compatible with ECC6 EHP7. For more details refer to the SAP note that is mentioned in my reply on the thread below.
    Compatibility between PI 7.11 and Ehp7 for ERP6
    Rgds
    Eng Swee

  • Create SSO on SAP portal to ECC 6.0 EHP4 backend

    Hello,
    I want to create a SSO connection form my SAP Portal server to my ECC 6.0 EHP4 Backend system.
    My JAVA Portal is installed on the same system as the ECC 6.0 backend system.
    For the configuration I follow the steps as described in the document: http://www.sap-img.com/basis/configure-the-sso-single-sign-on-for-portal.htm.
    At point 5.3 I have to set the Backend System as "ACL" in the Portal. So Iu2019m still in the Visual administrator from point 5.2 but now I go to the path Server --> Services --> Security  Provider --> Ticket.
    Here I choose the authentication tab and want to add the com.sap.security.core.server.jass.EvaluateTicketLoginModule. Buth when I press the Add button I get a list of available login members. In this list there is no com.sap.security.core.server.jass.EvaluateTicketLoginModule login module available. Does someone know what Iu2019m doing wrong or how I could add the correct login module?
    I attach a screen shot from Visual administrator.
    Kind regards,
    Richard Meijn
    Edited by: Richard Meijn on Aug 10, 2011 8:20 AM

    Cahtal,
    Thanks for you quick reaction but it's not all clear for me. So could you explain it a little bit more detailed fo me.
    If I write something wrong please correct me. I understand the following
    So If I am on the "Authentication" tab I press the Add new button
    In the list which shows up I select the u201CEvaluateTicketLoginModuleu201D
    Here I change the name and option value to trustedsys01=<PORTAL_SID>, <PORTAL_CLIENT>
    Kind regards,
    Richard Meijn

  • Compatibility between Java crypto and open ssl

    Hello
    I have some question about compatibility between java crypto and openssl library.
    This is my case:
    1.I created DESede key and stored it to file:
    SecretKey key = KeyGenerator.getInstance("TripleDES").generateKey();
    File f = new File("c:\\key.dat");
    DataOutputStream dos =new DataOutputStream(new FileOutputStream(f));
    dos.write(key.getEncoded());
    dos3.close();2.I encrypt some file "c:\\normal.dat" through:
    ecipher.init(Cipher.ENCRYPT_MODE, key2);
      byte[] enc = ecipher.doFinal(normalData);
      File f2 = new File("c:\\enc.dat");
      DataOutputStream dos =new DataOutputStream(new FileOutputStream(f2));
      dos.write(enc);
      dos.close();

    You have carefully left out some critical java code, namely the Cipher.getInstance() method. You'll notice in the documentation for this method that there 3 components to the "transform" argument of this method, the algorithm, the mode, and the padding. All of these must match exactly with the what openssl is using. Furthermore, if you are using one of the modes which require an IV, like CBC mode, then this must match exactly too. If you don't explicitly specify some of these parameters, you might get default values supplied. It is up to you to find out what these are.

  • Relationship Between ECC Customers (Contact Persons) and CRM BP

    Hello,
    I am new to middleware and need some help with the relationship between ECC customers/contact persons and CRM business partners.
    We are transferring via bdoc this information from ECC to CRM.
    Which bdoc types are used when transferring customers/contact persons? I believe it is BUPA_MAIN but am not too sure. How is the relationship between customer its contact person transferred? Is this done through BUPA_REL? I looked at the segment fields in SBDM but am not too sure how to understand the relationship...
    Thanks for the help!
    Regards,
    Tiffanie

    Thanks! With the initial load, how do I check what fields are being passed in the bdocs?
    I tried to look for customer_main, customer_rel in SBDM  and couldn't find it. Instead I used BUPA_MAIN and found some segments but couldn't find all the data that was being transferred (e.g. customer name, address, etc...) Where do I find all the fields contained in the bdoc?
    I see them in SMW01 when I view the bdoc contents but can not find the actual structure (data fields) that are being brought in from ECC.
    Thanks!
    Tiffanie

  • Communication between ECC and CRM

    Hello,
    I am in phase of showing communication between SAP CRM 5.0 and ECC 6.0.
    I am struggling with finding some simple transactions which are common in both, with which I can show correct connectivity between ECC and CRM.
       I need to save some data from CRM and access the same via transaction within ECC, save some data via ECC and access it via CRM. I already established RFC link between ECC and CRM.
    Probably communication between SD module of ECC with CRM.
    Can you please help me out with this, a clue/correct direction will be of very helpful. Basically I want to know, what transaction I can use for same.
    Any help is really appreciated.
    Thanks
    -Vishal

    Hi Glenn,
          I followed all steps in document mentioned above. In the end during execution of transaction I selected appropriate source and destination, when I click start transfer objects, it gets stuck in waiting phase.
    Among those steps I was not able to perform step#10. Creating Subscriptions for OLTP. My ERP is not displaying this option under subscription wizard. Should it be reason for not starting transfer ? I also do not see ERP logon screen when I select transfer.
    My another question is when transfer will complete, where I'll be able to see transferred objects within ERP database ?
    Thanks
    -Vishal

Maybe you are looking for

  • Report for Terms of Payment

    Hi Can I have a report for Terms of payment used in Purchase Order. Report layout I need is like PO# Terms of payment. Suggest me ways to do it or thru std report Manoj

  • B2B Inbound File with Multiple Transactions failing

    Hi , Problem Summary: When the inbound file is coming with multiple transactions (combination of 997 and non-997) , If the 997 is the FIRST transaction in file, B2B is processing only 997 and remaning transactions are getting rejected. Where as if th

  • E-mails and Text not English

    When I try and reply to messages or IM, my keyboard starts at the right of the screen adn types in strange sybols to the left. How do i get it back to English and why would it have changed? Solved! Go to Solution.

  • Deleted Movies Home Folder with Transmit

    Hi, accidentally I deleted my movies home folder with Trasnmit (pointing to the wrong window and bang!!!, bye bye movies!!!), and I managed to recover my files with Data Rescue II, but my problem is to get my Movies folder re-rooted to my user, which

  • LOV filter issue

    When we enter a value on the base page and click on the LOV we get the usual popup window. When we now try to conduct a search within the popup window the results are filtered so we can onlly return the intial value. In other words the second query w